PLEASE HELP! Anyone got this error when running Parallels and Win XP

Hey ALL -I know I know why are you running windows on a MAC --well I still have some programs that I need to work with on Windows but anyway I am getting this weird error message when Windows starts under Parallels:
[C] MAC Windows
Timed out waiting for the file system to initialize. The Volume has been ejected. You can use the
init_timeout mount option to wait longer.
what is this error message -I cant figure it out
thanks
Matt

Since Parallels is not an Apple product, you'll probably be better off posting your question in the Parallels forums:
http://forums.parallels.com

Similar Messages

  • Please help me with this error: "Apple application support was not found... Error 2"

    Can anyone please help me with this error: "Apple application support was not found... Error 2"
    I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
    "Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
    Thank you

    iTunes "Apple Application Support is required... Error 2" and possible fix.
    I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
    I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
    Problems:
    The initial error during the installation of iTunes was:
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
    The error (after installing iTunes) when trying to run iTunes was:
    Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
    After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
    http://support.microsoft.com/kb/2688946
    This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
    Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Note: The installation of VC++ rolls back when it fails.
    Solution:
    Through this error I found this MSKB article:
    http://support.microsoft.com/kb/946414
    The Automated MS "Fix It" msi package didn’t work.
    Note: Please backup your registry first (see the above MSKB article for instructions).
    I opened the registry and (as instructed in the MSKB article) deleted the following keys:
    HKEY_LOCAL_MACHINE\COMPONENTS\
    PendingXmlIdentifier
    NextQueueEntryIndex
    AdvancedInstallersNeedResolving
    Reboot and reinstall iTunes.
    If it helps you please like this so others can find it.

  • Got RMAN error when running RMAN backup of archivelogs on physical standby database

    Got below error when running RMAN backup of datafiles and archivelogs on physical standby database.
    RMAN-06820: WARNING: failed to archive current log at primary database
    ORACLE error from target database:
    ORA-17629: Cannot connect to the remote database server
    ORA-17627: ORA-00942: table or view does not exist
    Could anyone help me? Thanks,

    Hello;
    When you connect RMAN to the source database as TARGET you must specify a password even if RMAN uses operating system authentication.
    So the errors ORA-17627 and ORA-00942 appear to be cause and effect.
    What version of Oracle?  ( 11.2.0.4 according to the tag )
    Can you post your backup script?
    Best Regards
    mseberg
    Update
    According to :
    Database Error Messages 11g Release 2 (11.2) E17766-03
    RMAN-06820: WARNING: failed to archive current log at primary database
    Cause: An attempt to switch the archived log at the primary database failed.
    So I would check my Primary alert log for an issue.
    Message was edited by: mseberg

  • Hp pavilion dv6 6180 help me for this error when I am using my recovery disk

    hp pavilion dv6 6180 help me for this error when I am using my recovery disk
    The destination drive is not connected

    Hello Mohammadshamlou.  I understand that you're having some issues using your Recovery Disc.  It is giving you the error that the drive is not connected.  Is this correct?  How long have you had the notebook?
    What issue originally led you to want to try a recovery?
    The error seems to imply that it is not detecting the hard drive as this would be the most logical destination drive.  So, I feel the best thing to try first is verify that the hard drive is in proper working order.  Follow these steps and please post the result. 
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • TS1702 I got this error when doing a restore

    I got this error when doing a restore and the restrictions were turned on .  I disabled restrictions and the restore was able to complete.

    The error in itunes had a link to http://support.apple.com/kb/TS1702.  I placed this message here for anyone that might navigate to the same message and would hopefully find this.  Yes turning off restrictions allowed the restore to complete and everyone is now happy.

  • IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

    IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

    spacepilot wrote:
    i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me  new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
    all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
    foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with  a firmer grasp of english that the normal call centre staff
    welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    itunes could not connect to the iphone an unknown error occurred 0xE8000003 please help me with this error any one have idea ?

    http://support.apple.com/kb/ts3221

  • TS2570 Please help me in this issue. when I use C hold down when mac start nothing happed

    Please help me in this issue. when I use C hold down when mac start nothing happed

    This causes the Mac to boot from the DVD drive.  Hold the C key down between the startup tone and the logo.
    (the shift key is not required).
    Another way to do it is to hold down the Option key during boot and the bootmanager will show you all the possible boot devices and you can pick from there.

  • I got this error: 503,0. And I cannot publish my new update?

    I got this error: 503,0. And I cannot publish my new update?
    I only change a word in the Iphone and would publish this, - and then got this message below?
    And now cannot publish, - what is this?????

    Hello Hanna,
    this happens due to the migration going for Business Catalyst at this moment. Status is updated here: http://status.businesscatalyst.com/
    More details here: http://adobebcmigration.com/
    Regards,
    Cristian Radu

  • Anyone got this error message when going to the creative suite color settings from the bridge ?

    I got this error message saying :"BRIDGE'S PARENT APPLICATION IS NOT ACTIVE, Bridge requires that a qualifying product has to have been launched at least once to enable this feature.
    Plz anyone do you have any tips or help to fix this problem? thank you very much

    What do you have installed, in what form did you acquire it, and what kind of computer you're using please?
    So Bridge doesn't think you have any other Adobe programs installed properly.
    If this isn't a trial or cracked version you're using, you're entitled to free installation support from Adobe by phone.

  • Please help me with this error message on my lost Crashed Thread:  1  Dispatch queue: NSOperationQueue Serial Queue  Exception Type:  EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000

    I was organizing my contatcs when suddenly it disappeared and got this error message.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    For this step, the title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
    Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, select
              DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
    (not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
    I know the report is long, maybe several hundred lines. Please post all of it anyway.
    If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • Hello Technical Experts... please help me on this error :- 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.

    In my A/P credit memo screen i have incorporated a column for adding reference to closed A/P Invoices. upon filling this field with DocNum of APInvoice certain other fields also get filled from an SQL query. One among them is the TaxCode. My problem is that the TaxAmount(LC) field at the last row of the matrix is not filled with the appropriate value, it remains 0. On trying to add the document or pressing the link button on the TaxAmount field a status bar error message pops up showing, 'Tax data is missing ArrayOffset 12, srcLineNum 0, srcGroupNum -1'.
    Please Help me solve this issue.
    Thanks in Advance
    Rajeev

    Hi,
    Please check SAP note:
    1860926 - When updating a Purchase Order via DI API "-12109 Tax data
    is missing..." Error occurs
    Thanks & Regards,
    Nagarajan

  • Please help me in this error

    Hi all,
    I am new to solaris platform. I am using List template in my program. I wrote a makefile to compile this program. While compiling it is giving the following errors. I am struggling with this error for the past 3 days.
    errors
    "/opt/SUNWspro/SC5.0/include/CC/Cstd/rw/rwdispatch.h", line 63: Error: RWis_integral_type(int) already had a body defined.
    "/opt/SUNWspro/SC5.0/include/CC/Cstd/rw/rwdispatch.h", line 121: Error: Multiple declaration for _RWdispatch<int>.
    Anybody please help me in this regard. I will be thankful to you.
    My platform Forte Developer 6 update 2.
    Thanks
    venkat

    Get the latest patches for the compiler and see if that fixes the problem.
    http://developers.sun.com/prodtech/cc/downloads/patches/

  • HT1349 System Error -' MSVCR80.dII is missing from your computer'. Got this error when updating my itunes. Now it won't let me open itunes.

    Got this message when trying to update the latest version of itunes

    HT1925: Removing and Reinstalling iTunes for Windows XP
    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    This is not my area. I don't use PCs. I'm trying to help by posting information from those who are knowledgable about fixing this problem. The second link above is directly from Apple.

  • I got this error when migrate from Jdev11gTp4 into JDev 11g (Build 5188)

    Hello,
    when i migrated my application from Jdev11gTp4 into JDeveloper 11g (Build 5188) , i got this error but it's not understandable for me and I am new in jdeveloper and adf application
    C:\JDeveloper\mywork\Application14\FOO\ViewController\public_html\myFolder\myPage .jspx
    Error(7,4): The public type __myPage_32__jspx must be defined in its own file
    Thanks
    GreenApple
    Edited by: greenApple on Jan 15, 2009 9:18 AM

    Hello,
    when i migrated my application from Jdev11gTp4 into JDeveloper 11g (Build 5188) , i got this error but it's not understandable for me and I am new in jdeveloper and adf application
    C:\JDeveloper\mywork\Application14\FOO\ViewController\public_html\myFolder\myPage .jspx
    Error(7,4): The public type __myPage_32__jspx must be defined in its own file
    Thanks
    GreenApple
    Edited by: greenApple on Jan 15, 2009 9:18 AM

Maybe you are looking for