Please help -Ap refused static address -5508 controller 7.0 software

HI guys
Hope you well
I have a problem with a site, simple problem but becoming an issue.
I have to change the ip address or the lwapp1142 to static but it refuses to take the ip address and keeps getting the Dhcp address.
The address i would like it to use is of the same managment Ip adddress of that of the controller.
what I did notice is that when setting up the 5508 compared to the 4400 controller
we all know that the 5508 uses Capwap and the older code used LWAPP.
In setup of the controller i saw the step that normally says AP manager interface is not there anymore it just asked for managment and the normal interfaces like service ,Virtual etc
in my understanding that Ap manager ip address normaly makes the Ap associate with WLC since on bootup of the AP so it can do so to download the image.
can th problem be that teh network guys are using dhcp option 150 rather then 43 where the Ap keeps getting the data vlan ip address? or is teh above a problem
I have also consoled into the ap and physically tried setting it to manual and takes it then reboots and gets dhcp again
This is very important to sort out since our Gnoc cannot monitor the devices
Please guys your input will be much apprciated
Thanks
Thags Govender
mail me at thags.govender|@hp.com

You lost me when you started talking about the 5508 management IP address... The Management Interface is THE AP-Manager on a 5508 (unless you specify otherwise). And the DHCP Option stuff shouldn't matter if you are trying to use static IP... And as far as AP Discovery goes, the Management IP is always the IP used in the discovery process (AP-Manager or not, dynamic discovery should put to Management IP).
So what exactly is your problem?
The AP isn't joining?
Or the AP is joining with a DHCP address and not a Static IP address?

Similar Messages

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2

Hi All,
Subject: Please help me to get Oracle 10.2.0.5 software for 64 bit Windows 2008 R2 operating system.
I am looking for Oracle 10.2.0.5 software to install in windows 2008 server (64 bit) R2. I tried with oracle download repository but unfortunately I couldnt find this software. In the below link I can see the product Oracle 10.2.0.5 - 64 bit (Itanium). I have tried to download and install in the server but I received in-compatible error message.
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
From the oracle support certification site I have found that the Oracle 10.2.0.5 is the compatible version to installed in windows 2008 server(64) R2.
I am trying very hard to find Oracle 10.2.0.5 - 64 bit. Can you please suggest me where I can download this software.
Please do the needful.
Regards,
Jame

Hi;
Which means, do i need to install 10.2.0.4 and then to upgrade 10.2.0.5 using patchset?10.2.0.1 is base relase 10.2.0.x is patchest. 10.2.0.5 cover previous patchest errors which mean you do not need install 10.2.0.4 than upgrade it 10.2.0.5
Regard
Helios

Please Help - Connection Refused

Hello,
I am having trouble connecting to cloudscape database, have been working OK for the past
couple weeks with an application that I have writen but now big problems!
java -Djdbc.drivers=COM.cloudscape.core.RmiJdbcDriver Testjava.sql.SQLException: Connection refused to host: localhost; nested exception is:
java.net.ConnectException: Connection refused: connect
at RmiJdbc.RJDriver.connect(RJDriver.java:156)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at COM.cloudscape.core.RmiJdbcDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at Test.getConnection(Test.java:14)
at Test.main(Test.java:54)
*I am running cloudscape
*set the class paths to point at
- RmiJdbc.jar
- cloudclient.jar
I have written a small test program to check problem,
//////////////////////////////////CODE LISTING/////////////////////////////////////////////
import java.sql.*;
import java.util.*;
public class Test
{ static Connection conn = null;
static Statement stmt = null;
static ResultSet rset = null;
private Test()
public static Connection getConnection(String url) throws SQLException
{ DriverManager.setLoginTimeout(10);
return DriverManager.getConnection(url);
public static void close(Statement stmt)
{ if(stmt != null)
{ try
{ stmt.close();
}catch(Exception e)
{ e.printStackTrace();
public static void close(Connection conn)
{ if (conn != null)
{ try
{ conn.close();
}catch(Exception e)
{ e.printStackTrace();
public static void close(ResultSet rset)
{ if (rset != null)
{ try
{ rset.close();
}catch(Exception e)
{ e.printStackTrace();
public static void main(String [] args)
{ try
{ String url= "jdbc:cloudscape:rmi://localhost:2005/cloudscapeDB;create=true";
conn = getConnection(url);
stmt = conn.createStatement(ResultSet.TYPE_FORWARD_ONLY, ResultSet.CONCUR_READ_ONLY);
}catch(SQLException e)
{ e.printStackTrace();
close(rset);
close(stmt);
close(conn);
Please Help me!!!!

It is obvious that noone is going to reply to me, so I have kind of solved this for myself,
for some unknown reason my origonal program that worked fine doesnt now.!?!?!??!?
However decided to approach problem from another side, and give both my desk and head a break.
Below is now how I am connecting to a database and return a connection to it, it works,
public static Connection getConnection() {
String databaseName = "jdbc:rmi://" + "localhost" + ":1099/jdbc:cloudscape:CloudscapeDB;autocommit=true;create=true";
try {
Class.forName("RmiJdbc.RJDriver");
} catch (ClassNotFoundException e) {
System.out.println("PopulateTables: caught getting connection: " + e);
Connection con = null;
try {
con = DriverManager.getConnection(databaseName); // , user, password);
} catch (java.sql.SQLException se) {
System.out.println("PopulateTables: caught getting connection: " + se);
return con;
Thanks me.

I got a new e-mail address and I reset my iPod so it already has the new email address. I can't seem to change the address on my iPad or iPhone. Please help me change the address on all my devices!

I got a new email address and I reset the iPod so it already has the new address. I can't seem to change the address on my iPhone5 or iPad. So please help! How do I change the address for my apple ID and icloud on all my devices? I don't want to reset my iPad and phone just to set new email address I can't do updates without the password and I have forgotten my password for my old email address. Please Help! Getting frustarted!

If the old ID ("email address") is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Someone please help me!! i'm tryin to download software 5.0 on my blackberry tour 9630

Hi can some please help me i'm tryin to download software 5.0 on my blackberry 9630 i see it as an option in my desktop manager but everytime i click next it just won't start the upgrade!! why??? please someone help thanks

First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion.
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help - Connection Refused - Mac to Windows Server 2012

I have downloaded MS Remote Desktop onto my brand new Macbook Air OS X and have tried to connect to my school network - which when logged in says it is "Windows Server2012"
However each time I try to log in it simply says connections refused. Nothing more.
Not sure what I can do next.
Thank you for any help,
Laura

Hi Laura,
Thank you for posting in Windows Server Forum.
Are you trying to remote desktop with IP address or hostname?
Please try both alternate way and check is there any difference between them. Also as suggested by Manouchehr Omari, please see that you have remote desktop enabled on server 2012 and related RDP port (3389) opened for remote connection to take place under
firewall setting. If possible for a try disable firewall and check. You can get more troubleshooting information from beneath link.
Remote Desktop Client on Mac: FAQ
http://technet.microsoft.com/en-in/library/dn473006.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1904 Everytime I make an order I am charged twice and cannot rectify this charge please help as refuse to play anymore. Because of these charges please help.

I have played Funbridge for a year at least and on all my orders I am charged twice but not given twice the time. Please look back at my account as I jhave tried every way of contacting to rectify this without success so refuse to pay any more until I get refunded.

First off this is a USER forums. So asking for a resolution here will not help you.
What are all of the ways that you have taken to try to get a resolution?
Have you tried going to expresslane.apple.com selecting itunes then itunes store and then the option that best matches your issue and input the information which is requested to contact itunes?
If you have done so and it has been longer than 48hrs and you still have not got a reply back,
MayBe you should then try calling Apple Support and ask if can speak to the fraud department and then I am mostly sured you would get information on that.
Best of luck

Please help: connection refused on localhost

I'm using RMI in a BEA WebLogic 7 environment. I've written an RMI object that
registers itself (with Naming.rebind) in its main method:
myObject mo = new myObject();
Naming.rebind("//localhost:7001/my_object", mo);
I am importing standard RMI packages, not WebLogic RMI packages. The code itself
appears to be fine, and I have deployed it as a startup class in WebLogic 7. Problem
is, when I restart WebLogic and that Naming.rebind call is executed, it returns:
java.net.ConnectException:
Connection refused: connect
at java.net.PlainSocketImpl.socketConnect (Native Method) ...
I am running WebLogic on port 7001 on my local workstation, which has a dynamic
network IP,
so I need to bind at either 127.0.0.1:7001 or localhost:7001. I have tried both
repeatedly in my code, with and without the port number, and everything fails.
I also played with the Socket permissions in the weblogic.policy file and fileRealm.properties
file, but still no connection. I'm at wit's end. Can you help, please?

I am having the same problem. Surprizing thing is the creator (SAP) itself is not solving the problem.
created: jce/
inflated: jce/local_policy.jar
inflated: jce/US_export_policy.jar
inflated: jce/README.txt
inflated: jce/COPYRIGHT.html
C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.1164.1274306683
jre\jce\COPYRIGHT.html
C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.1164.1274306683
jre\jce\local_policy.jar
C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.1164.1274306683
jre\jce\README.txt
C:\DOCUME1\ADMINI1\LOCALS~1\Temp\sapinst_exe.1164.1274306683
jre\jce\US_export_policy.jar
4 file(s) copied.
Start mode: gui (Gui only)
Connection parameters:
GuiServer host: localhost
GuiServer port: 21212
GUI mode : normal
Starting...
<<< frog.jar: version 7.20.12 06/06/08 sap.theme: null >>>
Exit status of child: 1

Please help , "Connection refused: connect "

hello,
i have got this exception while connecting to server ?
what does it mean ? and what can i do to solve this problem ?
this is so important for me ! i have to solve this in a short time.
thanks for helps.
Musa YILMAZ
// == ERROR
com.mysql.jdbc.CommunicationsException: Communications link failure due to underlying exception:
** BEGIN NESTED EXCEPTION **
java.net.SocketException
MESSAGE: java.net.ConnectException: Connection refused: connect
STACKTRACE:
java.net.SocketException: java.net.ConnectException: Connection refused: connect
at com.mysql.jdbc.StandardSocketFactory.connect(StandardSocketFactory.java:151)
at com.mysql.jdbc.MysqlIO.<init>(MysqlIO.java:280)
at com.mysql.jdbc.Connection.createNewIO(Connection.java:1765)
at com.mysql.jdbc.Connection.<init>(Connection.java:430)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:268)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at pi.a(pi.java)
at pi.b(pi.java)
at Main.<init>(Main.java)
at tk.run(tk.java)
at java.lang.Thread.run(Unknown Source)
** END NESTED EXCEPTION **

You are trying to connect to wrong host or port number
or
MySQL server that you are trying to connect is not running

PLEASE HELP. shell/tcp: bind: Address already in use

Hi,
I am getting theses messages every 10 minutes and I don't know why.
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:37:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:37:23 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:47:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
The only strange thing that I see is that in /etc/inetd.conf
there are theses lines:
shell stream tcp nowait root /usr/sbin/in.rshd in.rshd
shell stream tcp6 nowait root /usr/sbin/in.rshd in.rshd
exec stream tcp nowait root /usr/sbin/in.rexecd in.rexecd
exec stream tcp6 nowait root /usr/sbin/in.rexecd in.rexecd
But I haven't enabled IPv6 on my system.
I also have this message at random time:
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 268928 daemon.error] rusersd/rpc/datagram_v,circuit_v: could not get transport information
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 307641 daemon.error] rusersd/rpc/datagram_v,circuit_v: tli_socket: No such file or director
There is only one instance of inetd running.
I haven't installed any additional services. At the beginning things went ok I think that the problem started when I added an IP address to the second eth interface.
The system is a Sun Netra T1.
The system version is: Solaris 8.
Please reply also to: [email protected]
Thanks in advance.

Hi,
I am getting theses messages every 10 minutes and I don't know why.
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:17:21 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:27:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:37:22 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:37:23 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:47:24 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 03:57:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:07:26 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:17:27 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:27:29 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
Feb 17 04:37:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] shell/tcp: bind: Address already in use
Feb 17 04:47:30 MONTSENY inetd[29012]: [ID 161378 daemon.error] exec/tcp: bind: Address already in use
The only strange thing that I see is that in /etc/inetd.conf
there are theses lines:
shell stream tcp nowait root /usr/sbin/in.rshd in.rshd
shell stream tcp6 nowait root /usr/sbin/in.rshd in.rshd
exec stream tcp nowait root /usr/sbin/in.rexecd in.rexecd
exec stream tcp6 nowait root /usr/sbin/in.rexecd in.rexecd
But I haven't enabled IPv6 on my system.
I also have this message at random time:
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 268928 daemon.error] rusersd/rpc/datagram_v,circuit_v: could not get transport information
Feb 18 18:43:46 MONTSENY inetd[157]: [ID 307641 daemon.error] rusersd/rpc/datagram_v,circuit_v: tli_socket: No such file or director
There is only one instance of inetd running.
I haven't installed any additional services. At the beginning things went ok I think that the problem started when I added an IP address to the second eth interface.
The system is a Sun Netra T1.
The system version is: Solaris 8.
Please reply also to: [email protected]
Thanks in advance.

Please help GW letters and address for BOA, NEED ADVICE!

Ok!, so i paid off a collection i had for a old BOA CC and i want it to be removed from my CRs. How should i go about doing that? Are there any emails, mailing addresses, etc. i should know about?

winchestertherealtor wrote:
Ok!, so i paid off a collection i had for a old BOA CC and i want it to be removed from my CRs. How should i go about doing that? Are there any emails, mailing addresses, etc. i should know about?I would Google BoAs headquarters address and mail the GW letter to the office of the CEO. Good luck http://ficoforums.myfico.com/t5/Rebuilding-Your-Credit/GW-letter-Q-amp-A-Examples-and-GW-Success-Stories/td-p/1573680

Please help! Valid email address?

Why do I keep getting asked to enter a valid email address? I have verified my email but yet I can not continue with adobe unless I enter my email WHICH I HAVE!

This is a User 2 User site. We do not have control over how the site functions. But all users must signin to the forums to post. When you sign in review the options and select options that might adjust you login, like "remember me" or "stayed logged in".

Please help with an error "could not write value key \Software\classes\iTune.wav.....

I have windows 7 with plenty of memory and storage capacity. When accessing iTunes I had an error message to uninstall and reinstall. I have uninstalled but when trying to reinstall I get the error message "could not write value key \software\classes\iTune.wav. Verify that you have sufficient access to that key or contact your support personnel" I don't understand what this means, can anyone help please?

For "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
If you still have issues see Troubleshooting issues with iTunes for Windows updates.
tt2

HT5457 Could you please, help me? I can't dowload and Istall software Update on my Iphone

I need help, please!!!

If you don't have at least iOS 5 on your device you won;t have a Softare Update option and you'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
iOS: How to update your iPhone, iPad, or iPod touch
Scroll down to the section titled: Update your device using iTunes

Please help -Ap refused static address -5508 controller 7.0 software

Similar Messages

Maybe you are looking for