PLEASE HELP Audigy 2 zs Platinum issue, reading noise from Line i
Hello, any help at all you can give will be greatly appreciated.
I recently installed my Audigy 2 zs Platinum on my computer, it was working fine until I began to record, It was working fine for the first 2 hours of recording however we disconnected the microphone from line in 2 and connected a bass guitar, then it started registering nosie from the line in 2 jack, we the disconnected the bass guitar and the noise continued. I have completly uninstalled all the creative drivers and reinstalled them, as well as checked the cable connections. I have noticed some other odd behaviors, if I plug headphones into the front microphone jack I do not hear static only a sort of blipping like that of a metranome. however if i use my speakers i hear large amounts of static with the blipping in the background, I also tested my speakers with a walkman and they play sound perfectly. All diagnostics tests have come back with everything passing. Any help you can give at all with this would be greatly appreciated.
I am running:
XP Pro with service pack 2 (installed a long time before sound card)
nvida graphics card
Pentium 4 with hyper threading
Syntax mother board
tdk cd dri've
maxtor hard dri've
Old_School,
A line level out shouldn't cause any problems but it may still be that there is a hardware problem here. To help diagnose this, I would ask that you cleansweep and reinstall the card. Use the instructions here to do this:
http://us.creative.com/support/kb/ar...asp?l=2&sid=72
Jeremy
Similar Messages
-
My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.
What version of OS X are you using? Exactly which MBA model do you have?
-
Please help me on URL mapping issue
Hi,
I am new to Oracle apps. So please help me to solve this issue. I have created new OC4J instance and changed my URL mapping to /MYApp but when i access application trough browser http://myapp.com/MYApp/../../help I am getting 404 error. If I change the URL http://myapp.com/forms/../../help it works fine. What am i doing wrong?
Please help me to get raid of this issue.
Thanks in advance
KarthikHave you attempted to backup and then clear the AIF_EBS_GL_CCID_STG table and then re-ran your data load rule with the "Full Refresh" option?
If not, you will want to do this and then check the account type in the table after the data load rule run.
Refer to the following KM Document for information on clearing the table:
ERPI Code Combinations are Out of Sync With EBS (Doc ID 1473119.1) -
After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly turn on back to ringing mode. So please help me to resolve this issue.
No one facing this issue in 3GS? please help me.
-
My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
Can you please help me how resolved this issue.
Hi Experts
I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
LDAPRC 010 another server is referenced.
Can you please help me how resolved this issue.
With Regards,
Trinadh BokkaYou may be able to solve by using
Note 1151329 - Depth of LDAP search is only one level below the base entry
Markus -
I had my vaio serviced and now I have had to download itunes again. After having done so, I no longer am able to see my old playlists on itunes though they are there on my phone.
I would like to view my old playlists & add new music on them. I keep my phone pretty organised & now to not see the music & playlists I already have on there on itunes is irritating me.
My first time here on the Support Communities.. I hope I am able to find my way around.
Please help; I'm exhausted trying to read up online.I had my vaio serviced and now I have had to download itunes again. After having done so, I no longer am able to see my old playlists on itunes though they are there on my phone.
I would like to view my old playlists & add new music on them. I keep my phone pretty organised & now to not see the music & playlists I already have on there on itunes is irritating me.
My first time here on the Support Communities.. I hope I am able to find my way around.
Please help; I'm exhausted trying to read up online. -
my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me
uninstall all iTunes,5 programes,this worked for me after reinstall them
-
Hi,
My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
Expecting some quick solution in this regard,
Thanks
Prabhu(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset -
I have ipad 1 . And i want to update it from ios 4.3.5 to ios 7 but i can't why ?? Please help me becouse i can't download apps from app store !!!!!
I would suggust:
1 to create a big camera for i pads and ipods and iphones so we can put it in another ipad or ipod or iphone and it has a zoom lens
2 when i downloaded photos and music from a computer to my ipad , i cant delete them now plese do the itunes like samsung becuz samsung have an easier way to download thing from computer
I hope to help me with my poblome and fix it please !!??
And i hope to take my suggusts and make me happy becouse apple it is cooler from samsung
Apple the best
H.MThe iPad 1 can't run the newer operating systems. It'd be like trying to play a bluray disc in your 6 year old dvd player....it simply lacks the hardware to make the software run.
No suggestion about the camera, but given that Apple's attitude seems to be to focus more on the more mobile devices for photography (the iPhone and Touch cameras got features, the iPad and mini didn't), that is highly unlikely. You can tell Apple what you want, but you'd probably be money ahead to get a digital camera.
as to the photos, anything put on via iTunes has to come off via iTunes.Your main alternative would be to look for photo apps that offer file exchange that may give you more functionality. -
Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
EdgilMake sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck -
Please help...I was downloading my pics from the SD card. I then I highlighted 5 pics and selected erase, once I selected erase 20 other pics was also erase. I need to know how can those erase pics be recovered? Please Help!
You will need data recovery software. See this post:
Re: I accidentally lost 3 weeks of photos, how do I recover them?
And please send feedback to Apple: This is a bug. Only the imported photos should have been deleted, not all photos on the card. You can use this form: Apple - iPhoto - Feedback -
Please help me to solve the issue in my query.
Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0) -
Please help me with installation of adobe reader
Hello, I hope I'm in the right spot. I finally was successful in downloading and installing flash player but now I can not download and install the adobe reader!! It gets all the way through the download and gives me the message "installation did not pass the integrity check"... as a result I can no longer read pdf's... Please help. What is up with this??? This was the same message and problem I had with installing the new flash player, but I ran a debugger and then was able to download the flash player. I tired running the debugger again and installing reader but it did not work. Please help. Thank you,
KathleenI've had the same problem installing the update for Adobe Reader 9.3.2. On every PC at work (Windows XP SP3) I have had to uninstall Adobe Reader and reinstall in order for the 9.3.3 to be accepted! Annoying but acceptable. However, on one particular PC I now have the problem where I am unable to neither uninstall nor update nor reinstall - whatever I do the same message comes up:
"This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package."
I hoped your link would assist, but alas it has not.
I have tried System Restore to a time prior to all this fuss and bother, but that hasn't helped either - the same message still comes up.
I am now at a loss as to what to do next and getting peed off as I'm having to try to resolve this remotely while at home, on a weekend, when I should be out enjoying the glorious London sun!
Cheers in advance to anyone who can help =)
P.S. Our PC's aren't linked to a network server - they are standalone. We're a charity with limited funds alas. -
Please Help! Bizarre error... read on!
Simple enough... it would seem.
I'm a complete flash noob so please have patience.
Had a template in Flash CS4, nothing fancy. Modified the text, pictures etc
I then saved the fla, exported movie (after testing) and all looked ok.
Opened dreamweaver, (blank page), inserted the swf in centre, then tested, all looked ok again. Published html with swf
Uploaded via FTP, then when checking the index.html, it shows up as a very old swf template file I once had on there ages ago. File appears to not be on server,nor stored locally.
So, I thought Dreamweaver was linking to something old, so i uploaded the swf index straight through my server admin upload feature - no dreamweaver involved. Played the swf from file manager, and still old index swf file? WTF?
I notice that there needs to be apparently an expressinstall file and a modifiedswf object file that needs to be uploaded. Does this cause the problem?
tried uploading those and still old swf.
Don't know where this old template swf is coming from? Can I check it from somewhere? Please help as it's driving me loopy!
See attached if any use...
PhilDepending on your selectable browser settings, the cache can be cleared automatically when you close and reopen the browser, or on a daily basis. Sometimes people set it up to never happen, and they suffer missing new things. You can usually clear your cache whenever needed via the Internet Options interface in the browser, or whatever your browser has to mimic that.
Maybe you are looking for
-
Exchange rate issue for import po
Dear friends, my client book a po in usd for the main party but the custom duty condation we are mataining in inr for a different ....now we have paid advance against the bill now the bill has come we need to clear the COMMISSIONER OF CUSTOMS account
-
How do you change the pram battery on a slot loading iMac?
I'm hopeful that a new pram battery will solve the problems I've been having with my iMac. I just have to put it in, and judging by the correspondence I've seen on this subject, that's not an easy job. (One letter spoke of having to remove 16 screws)
-
Using old account name after it has been deleted
I deleted an account because I learned that the only way you could re-name the short name was by deleting the account altogether. I had problems deleting the account from the admin account, even afer shutting off "fast users" and "auto login". THeref
-
...i have an image in PSE 6 that is correct in size and aspect ratio...when I save as a Jpeg or as a PDF file, the image becomes vertically stretched...what am I overlooking that is causing this problem?...thanks for the help...
-
Adding GIS Control to the WPF Agentry Client
Hi, I am trying to set up the WPF Client with the new Work Manager 6.1 for SAP. In the "SAP Work Manager 6.1 SDK Installation" guide, chapter 2.4, it says Copy the contents of GIS SDK for WPF from the Mobile Apps SDK bundle into the folder where the