PLEASE HELP, AUDIO INTERFACE PROBLEMS

hi, i just got a new macbook and logic express 7. i also just uploaded something for this audio interface iv got, the tascam US122. but it is not recognising it. the light for phantom power comes on if i plug the usb cable into my mac from the tascam but it doesnt come up anywhere on my mac to say that it has recognised it. if you could help pleeease do.
thanks

Hi,
The Tascam US122 is no longer a supported device. Try to go to the Tascam website, and see if they do have a driver that can run in your particular Mac.
If not, then you're S.O.L.
Cheers

Similar Messages

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • Please help with slideshow problems!

    Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing.  Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened".  How can I save a
    slideshow inprogress and be able to reopen and continue to edit and make slideshow?  I want to thank anyone who can help me with this in advance as I
    have gotten so frustrated that I want to just scream.
    Thanks

    Thanks for the help, thought I had done so but maybe not.  Anyway will have another go at it, now may I ask another
    question?  I am trying to add audio to slideshow.  I have some music I purchased thru amazon as mp3 files but I get
    message no codec and when I try to add wmv I get same message.  What type of file do I need and how can I add
    multiple songs to one slideshow.   I have one little wmv file that will go in, but it just replicates itself multiple times until
    it fills slide show. 
    Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
    Date: Sun, 26 Dec 2010 20:34:32 -0700
    From: [email protected]
    To: [email protected]
    Subject: Please help with slideshow problems!
    You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
    Now you are most probably using only the Output command: that is what makes the wmv file.
    You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
    If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
    -- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
    -- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
    -- The 1st entry on that Shortcuts bar is "Save Project"
    It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing.  Save each Project with a unique name.
    After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
    Note:  you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
    >

  • My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

    My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
    I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

    Hello Salmomma,
    Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac.  I recommend following the steps in the tutorial below for an issue like this:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    Additionally, you can delete music directly from the iPhone by swiping the song:
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • [ETL]Could you please help with a problem accessing UML stereotype attributes ?

    Hi all,
    Could you please help with a problem accessing UML stereotype attributes and their values ?
    Here is the description :
    -I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
    -Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
    -Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
    s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
    -However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
    Please help
    Thank you

    Hi Dimitris,
    Thank you , a minimal example is provided now.
    Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
    Instructions for reproducing the problem :
    1-Run the uml2etl.etl transformation with the supplied launch configuration.
    2-Open lqn.model.
    There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
    The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
    Thank you
    Mana

  • HT5312 i forgot my secret question, please help me this problem. Thanks

    I forgot my secret question, please help me this problem. Thanks

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact
    And/or see the  More Like This  section on the right.

  • Firewire and audio interface problem, please help

    Hi all
    I'm not being lazy, i've spent hours trawling through forums and google trying to find a fix but cant so hope someone here can help.
    Basically, I've been using my Macbook for Logic Studio with an audio interface (Motu 8pre). This was connected via firewire 400 to firewire 400 and worked absolutely fine no problems.
    I've recently got a Mac Pro. I've installed Logic onto it, my Motu 8pre driver etc etc and noticed that the firewire socket on the Mac Pro is different. I've been on the Motu website and quite clearly they say that a firewire 400 to firewire 800 cable will work fine with modern macs (this can be seen in more detail at bottom right of this web page http://www.motu.com/products/motuaudio/8pre
    I've bought one of these cables and plugged them into my interface and Mac Pro respectively, switched on the device as i have been doing for the past year with my Macbook, but the MacPro just wont seem to recognise it.
    How can I get this interface to work with my Mac Pro?
    I've tried connecting to different ports on back and front, restarting machine but it just wont work.
    Am I missing something simple here?
    Can anyone help?
    Thanks in advance
    Adam

    Ok its official I AM a muppet.
    Went onto motu site again and noticed they released an update driver for snow leopard. Downloaded it and it works fine.
    Fixed.
    Thanks

  • Help! audio interface problems

    I dont think this is just a logic problem but my audio interface keeps on stuttering and stopping, especially when using logic. Sometimes the time bar will be moving but there will be no sound then if i stop it might play a stutter or snippet of sound. There is no problem when listening through the laptop speakers. This has started happening with i tunes also.
    interface= tascam us-122
    If anyone can help that'd be great as it is really holding me back.
    Buffer is set to 1024, cant find more recent drivers.

    Hi,
    I found this inside the installer package:
    "This is version 3.4.0 of the Mac OS X Driver for the TASCAM US-122. The version you are installing requires Mac OS X 10.3.9 ("Panther") or later. This version is also compatible with Intel-based Macintosh computers using Mac OS X 10.4.4 or later."
    Note: Be sure to disconnect your US-122 from your computer before continuing with this installer!
    It looks like maybe...the revision for Mac OS 10.4.9 and later, in which Apple changed the FW and also maybe the USB stuff, might be the issue.
    If you have the time and inclination, I would try to install the Mac Os up to 10.4.4 and see if it works there... it's a bummer, but as I understand it, they no longer support this hardware anyways... so if you really have to use it, this might be the way to go.
    Cheers

  • Firewire Audio interface problems in Windows XP

    I am a happy user of boot camp with Windows XP and have up til now not had any problems. I have two firewire devices, one hard drive, one audio interface. The hard drive has both firewire 400 and 800 connectivity and works perfectly using both. But I have just recently purchased a Mackie Onyx Satellite audio interface which must use firewire 400.
    I follow the driver instructions and everything appears to install correctly. The device is found and shows in the device manager. But, the firewire indicator fails to light up on the device itself, and I have not be able to get any audio through the device.
    Please can someone help me! I am assuming it cant be the firewire connection itself because my hard drive works and the audio interface is at least found by windows.
    I have got the newest driver version from Mackies website too. I have made sure I have the msot up to date version of boot camp also.
    Any suggestions?
    Thank you very much in advance
    Edd

    Hi there-
    I initially bought the Alesis IO26 for my macbook but had so many problems with the interface that I returned it and bought a MOTU Traveler, which solved my problems. Too bad, as the Alesis unit was very nice and half the cost of the Traveler. Please note that many people have had problems with audio running Windows on a Macbook (see the threads on cracks and pops). The jury is still out on who the culprit is (Boot Camp, Drivers, Wireless, etc.) so hang in there. Hopefully, someone at Apple cares about this.

  • Alesis io2 Audio Interface problems

    Since the last update, ive noticed more lag, crashes and major problems with preferances not recognising certain audio interfaces, mainly my alesis io2,
    How do we contact apple to help remedy this?
    Ive re-installed osx and I stupidly forgot to back up everything, so I lost over 3000 songs, all my originals songs and every photo ive ever taken, so stupid of me.
    I have an Alesis io2, and its not being recognised in the sound preferances, under utilities in applications, its says that it's online but the its only outputting sound, this has only happened since the last update, up untill that I had no problems at all, in fact it was perfect for i what i want to record.
    Ive contacted Alesis, and they have not acknowledged my email and there is NOTHING on their website that addresses this issue. I really hope apple has a remedy, because if they dont, the io2 is rendered useless to me and i will have to fork out another couple of hundred bucks for another interface.
    So **** off, and im really sick of singing Apple's praise's.
    No Longer a fan. GRRRRRARGH
    Anyone who has a "fix" or any info on this...at all.
    PLease email me at: [ Edited by Host, No personal information please. ]

    I dont know what i need fixed, however since the last update there are a plethora of people who use an alesis io2 audio interface, and we are all frustrated that its now not being recognised in the sound preferances, it was working fine up untill the last update, now its rendered useless. Its frustrating because their not cheap pieces of equipment, upward of $250, so untill apple decides to remedy the flaws (which i cant specify because im a musician not a geek) We will be forced to fork out more money for another interface, it *****, it really *****. and who knows if there will even be a "fix" in the next update, im growing increasingly over macs, since i got mine last year, it just seems to cost more and more money to get add on's and programsetc they are difficult and expensive to find, even having to pay $400 for the apple help line to answer ANY question is just ridiculus.

  • PLEASE HELP.. PROBLEM WITH RESTORE

    okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
    a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
    so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
    PLEASE HELP ME!! I DONT know what to do.
    ipod 5th gen 30gb   Windows XP  

    ____________________16.06V16, Bus Type ATA, Bus Address [0,0]
    USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
    Universal Serial Bus Controllers:
    Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
    No IEEE 1394 Host Controller found.
    The last connected iPod serial number: ****.
    The iPod Service Logging Information:
    [SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
    [SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
    [SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
    [SERVICE: 0xB54,22:06:22 INFO] Listener Window created
    [SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB54,22:07:34 INFO] device is an iPod
    [SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
    [SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
    [SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
    [SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
    [SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
    [SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
    [SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
    [SERVICE: 0xB44,22:07:34 INFO] [1] input #0
    [SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
    [SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
    [SERVICE: 0xB48,22:07:38 INFO] [1] input #1
    [SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
    [SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
    [SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
    [SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
    [SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
    [SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
    [SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
    [SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
    [SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
    [SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
    [SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
    [SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
    [SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
    [SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
    [SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
    [SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
    [SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
    [SERVICE: 0xB44,22:07:51 INFO] [1] input #3
    [SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
    [SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
    [SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
    [SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
    [SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
    [SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
    [SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
    [SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
    [SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
    [SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
    [SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
    [SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
    [SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
    [SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
    [SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
    [SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
    [SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
    [SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
    [SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
    [SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
    [SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
    [SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
    [SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
    [SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
    [SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
    [SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
    [SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
    [SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
    [SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
    [SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
    [SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
    [SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
    [SERVICE: 0xB44,22:08:01 INFO] [1] input #4
    [SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
    [SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
    [SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
    [SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
    [SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
    [SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
    [SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
    [SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
    [SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
    [SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
    [SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
    [SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
    [SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
    [SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
    [SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
    [SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
    [SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
    [SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
    [SERVICE: 0xD04,22:09:01 INFO] Mounted
    [SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
    [SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
    [SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
    [SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
    [SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
    [SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
    [SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
    [SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
    [SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
    [SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
    [SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
    [SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
    [SERVICE: 0xB48,22:11:15 INFO] [1] input #5
    [SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
    [SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
    [SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
    [SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
    [SERVICE: 0xB44,22:12:22 INFO] [1] input #7
    [SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
    [SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
    [SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
    [SERVICE: 0xB48,22:18:13 INFO] [1] input #8
    [SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
    [SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
    [SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
    [SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
    [SERVICE: 0xB44,22:21:48 INFO] [1] input #10
    [SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
    [SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
    [SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
    [SERVICE: 0xB48,22:44:23 INFO] [1] input #11
    [SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
    [SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
    [SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
    [SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
    [SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
    [SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
    [SERVICE: 0xB44,22:52:47 INFO] [1] input #13
    [SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
    [SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
    [SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
    [SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
    [SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
    [SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
      Windows XP  
    well i clicked help.. and that didnt do anything either.. ;/

  • Audio interface problems?

    I dont think this is just a logic problem but my audio interface keeps on stuttering and stopping, especially when using logic. Sometimes the time bar will be moving but there will be no sound then if i stop it might play a stutter or snippet of sound. There is no problem when listening through the laptop speakers. This has started happening with i tunes also.
    interface= tascam us-122
    If anyone can help that'd be great as it is really holding me back.

    How is your i/o buffer set? Have you updated to the latest drivers for the tascam?

  • Please Help - Video Playback Problems

    I have followed all the instructions provided by iTunes support in an attempt to fix problems with video playback. They did not help. I downloaded 4 video files that would have smooth audio sound but skip and freeze continually throughout the entire video.
    This problem 1st occurred right after I downloaded the latest version of iTunes and then a purchased video. One point of interest is that all of my old video files from earlier versions of iTunes still work fine as they always did.
    Could anyone please help me to resolve this issue?

    I have had the same problem. I even bought a new 256mn video card and it did nothing. I have done everything i-tunes website suggest and nothing has helped.

  • M-Audio Firewire 410 Audio Interface Problem!

    I was just wondering if anyone out there has had the same trouble as I have with my 410 Audio Interface.
    I have a brand spankin' new iMac G5 recieving July 27th, 2005, and a pair of Behringer Truth B2031A Studio Monitors, and then of course my M-Audio 410.
    The problem I am having is that my speakers are picking up noises the G5 is making, how do I explain. It appears as if the speakers were picking up the power consumption changes and amplifying them. Whenever I move my mouse, or use expose or use an application, my speakers just make noises related to the CPU's performance.
    I replaced the speakers, bought new cables, exchanged the M-Audio interface 2 times and am using my 3rd box and the problem still consists.
    Another problem I have is, when I power everything off, the M-Audio Interface still recieves power, therefore blinking it's extremly bright blue LED all night long. (Which isn't supposed to happen).
    If anyone knows any solutions, or had the same problem, Help!!

    Hi Studzik,
    Welcome to the discussions.
    Ummm ---- given that you have a G5, maybe it's better that you post this is the iMac G5 section of the discussions (this is the flat panel iMac G4 section that you have posted in). That way, you have a greater chance of a G5 iMac user familiar with your issue picking it up and being able to help you.
    All the best, hope you find a solution.
    Cheers!
    Karl

  • Please HELP - Strange importing problems

    If anyone can help me I would greatly appreciate it.
    I already went through all of the support articles on importing for WinXP so I'm not sure what else to do.
    My itunes will show the track titles and everything correctly, but when I try to play the tracks, the speaker that represents if a track is playing goes down the list of tracks very fast and doesnt actually play any of the songs.
    When I import the songs, they all have a length of the ENTIRE length of the album, like 787:16 or something like that.
    The diagnostics test confuses me even more;
    E: ARTEC WRR-52Z, Rev 1.25
    Audio CD in drive.
    Found 10 songs on CD, playing time 45:32 on Audio CD.
    Track 1, start time 00:02:32
    Track 2, start time 03:31:22
    Track 3, start time 07:03:00
    Track 4, start time 10:54:05
    Track 5, start time 14:32:20
    Track 6, start time 18:37:30
    Track 7, start time 21:52:52
    Track 8, start time 27:43:25
    Track 9, start time 34:36:60
    Track 10, start time 41:21:05
    Audio CD reading failed. Error Code: 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450.
    To play or import music from a CD in this drive, you must be logged in as an administrator.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 24 32 40 48 52.
    The drive CDRW speeds are: 4.
    Someone PLEASE help me thank you so much!

    I have this same problem. iTunes was working fine until yesterday... then the problem you described started! Help!

Maybe you are looking for