Please help, battary is dead and original charger is broken
Hello,
a couple weeks ago, my original charger for my playbook broke. Since than, I did not use my playbook so often, because, the battary, was already really low and I though I just need to buy a usb adapter for it. Yesterday I bought it and I plugged it and nothing happened except that the light on the top is red for maybe 10 seconds and than it turns in green and blinks 5 times. so empty right?
Charging via Laptop is not possible and I´ve tried to reinstall my OS but it can´t connect to the device. probably, because the battary is empty. Can´t boot at all. Any helpful idea? thank you guys
pani wrote:
the battary, was already really low and I though I just need to buy a usb adapter for it. Yesterday I bought it and I plugged it and nothing happened except that the light on the top is red for maybe 10 seconds and than it turns in green and blinks 5 times. so empty right?
That is good... be patient.
LEAVE it connected to the wall outlet charger (not the USB > PC charger).
Leave it connected for 24 hours... every 3-5 hours, press and hold the power button only for about 20 seconds. Eventually it will boot on up, but first must reach a certain charge level.
You will see the blinking red and perhaps yellowish LED light, and perhaps a symbol on screen of "no battery". That means the battery is drained, but it must reach a certain charge before powering on.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
HT1349 my iphone went dead and wont charge at all, please help :(
my iphone went dead and wont charge. I tried plugging it on the wall and via the usb to my laptop but still no luck. any suggestions on how to make it work?
Try using a differnt USB cord. Or hold down the power/home button together for 10 to 15 sec or until you see the apple logo and then release, wait for your phone to boot back up.
-
My ipod is completely dead and wont charge. What should I do?
Ipod completely dead and wont charge. I've had it plugged in for days to multiple things. never happened before. please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone 3gs is totally dead and not charging if I will connect to power connector too
My iphone 3gs is totally dead and not charging if I will connect to power connector too
It shows only the battery charging sign when I will coonect to power connector and press menu button. But if I will put it for whole day or night too , It is not charging.
Please tell me what I can do.
I am so frustate.
Please help me.
ThanksAre you currently plugging it into a computer? If so, try plugging it into a USB power adapter. It's possible that you're trying to charge it from a low-power USB port, and that's not enough to sustain your phone and get it charging.
If you're still unable to get it to charge, schedule a visit with your local genius bar at apple.com/retail -
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
i've iphone 3GS. ios 5.1.1 i've a problems that it turnoff itslef. when i'm trying to turn it on. it just appear apple logo then go to black . keep trying till gives me battary is empty and must charge it. once i plug in it. its open and i found the battary as it 70 % for example( not empty ) if anyone try to call me its appear to me turn off but doesnt give him the mobile is turn off . its rining. please advice
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?
-
i forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder
If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. Then you can reset the password as explained here: http://support.apple.com/kb/PH2617. Of course, you can only do this if it's your ID.
-
Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.
Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
Or refer to this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866 -
Please Help me in Labview and MS Access Database Connective
Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
thanks in advance .duplicate post
-
hi my ipad air wont charge unless its turnt off please help i just boght a new charger it still wont work
Hi When you change your iPad, even if its off it will, turn on when you connect, to charger Check lightining port for any bits. Do a Reboot press &hold power button & menu button hold both down until you see Apple Logo This may help. Cheers Brian
-
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
Can someone advise me why I am having this problem
Always in the past .I have my Word Document on screen and then I go to
Publish and it atomatically PDF the doc.
The same if I have a PDF to convert to word. I have the PDF on screen and
to the right of my screen it will say Convert .I press on convert it
converts to word
In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time,
[email protected] writes:
I am having a problem converting word onto PDF . PDF into word.Please help
.I am signed and paid to Feb 2015
created by florencejohn (https://forums.adobe.com/people/florencejohn)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/7023171#7023171) -
Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.
www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums. -
While trying to import pictures from iPhone to iTunes, iTunes request to make software update and then to restore iPhone. I have cancelled the restore to rpotect pictures. The pictures have not been imported yet, but the iPhone display freezed at ITune connection page. Please help me save pictures and use the iPhone as usual. Restarting of the phone did not work so far.
RingomonIf the device is in recovery mode there is no date on the device to salvage.
Restore the device. -
My iphone 5c is completely dead and its charging but it wont turn on. Please help me.
So my iPhone 5c is completely dead. it has the charging sign on it and everything. And I plug it in and its charging but it will not turn on. I cant afford to get it fixed or anything so I need a way to get it back. Please help me.
Is it stuck on the apple logo or just saying that it is charging?
Maybe you are looking for
-
HT201322 I unhide all my songs, but they never show up in purchased?
I just got a new MacBook Pro and I was trying to tranfer all my iTunes songs over to it. Not all of my songs were bought, so I copied all my songs (including my bought ones) from my Mini Mac and put them on my MacBook with my external hard drive. But
-
hi, i need to test whether the SSL in tomcat is secure or not. i need to show some evidence to my supervisor that SSL did encrypt data during transmission. therefore, my plan is to sniff out some packet from SSL to show the encrypted data to my super
-
Hi, We're creating a PR with account assignment F & Item Category D and material Group X (no material master is used) from CRM. In ME52N, i dont see a GL account assignment GL is supposed to be retrieved automatically ("account assignment" tab) from
-
Dear Experts, i have witten the following lines oForm = SBO_Application.Forms.Item("Modal") oEdit = oForm.Items.Item("no").Specific oEdit1 = oForm.Items.Item("name").Specific userTable = oCompany.UserTables.Item("TESPA_LOGIN") userTable.GetByKey
-
Does SES11g support ACL security model in ECM11g
hi Experts: Does SES11g support ACL security model in ECM11g? All information I got is negative, but need some comfirmation, sometimes documentation is not accurate. If the answer is yes, could you give me a doc url I can reference? Best regards