Please Help! Bizarre error... read on!

Simple enough... it would seem.
I'm a complete flash noob so please have patience.
Had a template in Flash CS4, nothing fancy. Modified the text, pictures etc
I then saved the fla, exported movie (after testing) and all looked ok.
Opened dreamweaver, (blank page), inserted the swf in centre, then tested, all looked ok again. Published html with swf
Uploaded via FTP, then when checking the index.html, it shows up as a very old swf template file I once had on there ages ago. File appears to not be on server,nor stored locally.
So, I thought Dreamweaver was linking to something old, so i uploaded the swf index straight through my server admin upload feature - no dreamweaver involved. Played the swf from file manager, and still old index swf file? WTF?
I notice that there needs to be apparently an expressinstall file and a modifiedswf object file that needs to be uploaded. Does this cause the problem?
tried uploading those and still old swf.
Don't know where this old template swf is coming from? Can I check it from somewhere? Please help as it's driving me loopy!
See attached if any use...
Phil

Depending on your selectable browser settings, the cache can be cleared automatically when you close and reopen the browser, or on a daily basis. Sometimes people set it up to never happen, and they suffer missing new things. You can usually clear your cache whenever needed via the Internet Options interface in the browser, or whatever your browser has to mimic that.

Similar Messages

Please Help - "page error" / a system error occurred

I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail    Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message    Could not find the included template components/mix_documents2.cfm.
MissingFileName    components/mix_documents2.cfm
StackTrace    coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext    Error - array
1    Error - struct
COLUMN    0
ID    CFINCLUDE
LINE    15
RAW_TRACE    at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE    D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE    CFML
TagName    CFINCLUDE
Type    MissingInclude

With LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using?

Hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud apple please help support errors no service network.thank you

hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud.apple please help support errors no service network.thank you
<Personal Information Edited by Host>

tran ngoc nhan,
Viết bằng tiếng mẹ đẻ của bạn?
Tôi đoán Việt Nam?
Chúng tôi có thể dịch!
Nói cho tất cả vấn đề của bạn!
Cung cấp cho nhiều chi tiết!
Nếu không Việt Nam, dịch này ở đây!
https://translate.google.com/
Write in your native language?
I guess Vietnamese?
We can translate!
Tell all your problem!
Give much detail!
If not Vietnamese, translate this here!
https://translate.google.com/
CCC

Please Help in Buffered Reader getting error.....

Getting error
java.lang.NumberFormatException: For input string: ""
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
     at java.lang.Integer.parseInt(Integer.java:468)
     at java.lang.Integer.parseInt(Integer.java:497)
     at charread.main(charread.java:18)
    import java.io.*;
    class charread
        InputStreamReader ir=new InputStreamReader(System.in);
        BufferedReader br=new BufferedReader(ir);
        public void main()throws IOException
            InputStreamReader ir=new InputStreamReader(System.in);
            BufferedReader br=new BufferedReader(ir);
            System.out.println("enter a character");
            char p=(char)(br.read());
            System.out.println("entered character = "+p);
            System.out.flush();
            System.out.println("enter a number");
            String s=br.readLine();
            int n=Integer.parseInt(s);
            System.out.println("enter a number = "+n);
        Please Help.....

JoachimSauer wrote:
First you read a single character, then you read the rest of the line.
You probably entered a character and pressed enter.
read() returned the character, readLine() returned the rest of the line, which is an empty String. And empty String can't be converted to an int.
It's probably the easiest approach to just replace read() with a readLine() and take the first character of that String (after verifying that there is a character and optionally that there's only one character in that String).Alternatively you can call readLine() after you read the char.
However this is merely a quick fix and I am concerned about other aspects of your program.
InputStreamReader ir=new InputStreamReader(System.in);
BufferedReader br=new BufferedReader(ir);The alternative to wrapping a BufferedReader around an InputStream is to use a Scanner, contrast the above example with the one below:
Scanner sin = new Scanner(System.in);
System.out.flush();Calling flush in this situation in unnecessary.
int n=Integer.parseInt(s);Place the following code in a try/catch block every single time you parse a String from a user into an Integer in case an Exception occurs, e.g. user enters a word or letter.
Integer n = null;
while(n == null) {
try {
    String s = br.readLine();
    n = Integer.parseInt(s);
} catch(NumberFormatException e) {
    System.out.println("Please enter an Integer");
}Finally onto Class naming conventions, Class names begin with a capital letter, variables and methods begin with a lower case letter.
class charreadAvoid naming methods "void", especially with a return value of null. Or one might think, well in my case anyway that this is the entry point into your application.
public void main()Mel

Please Help! ERROR: Application Server failed. when Refreshing

Please help on this below issue. Thanks.
We have a requirement that using ASP.NET (C#), we need to open saved .rpt file (saved with data and the rpt file is assigned to the web page as query string) and let the users refresh themselves with latest data by clicking at refresh icon of the CrystalReportViewer. But it throws 'The Report Application Server failed' error message. What could cause this message. below is the piece of code we are using to configure the report.
private void ConfigureCrystalReports()
string reportPath = Server.MapPath("Reports
SEMS0001_UBS.rpt");
this.CrystalReportSource2.ReportDocument.Load(reportPath);
CrystalReportViewer1.Visible = false;
SetDBLogonForReport(this.CrystalReportSource2.ReportDocument);
int i = 0;
foreach (ParameterField field in this.CrystalReportSource2.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
//this.CrystalReportSource2.ReportDocument.Refresh();
CrystalReportViewer1.ParameterFieldInfo = this.CrystalReportSource2.ReportDocument.ParameterFields;
CrystalReportViewer1.Visible = true;
public void SetDBLogonForReport(ReportDocument reportDocument)
Tables tables = reportDocument.Database.Tables;
connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
//foreach (CrystalDecisions.Shared.IConnectionInfo connection in reportDocument.DataSourceConnections)
// connection.SetConnection(ConfigurationManager.AppSettings["DBServer"], "", ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
// connection.SetLogon(ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogonInfo);
//reportDocument.Database.Tables[0].ApplyLogOnInfo(tableLogonInfo);

Attaching full code ... Our case is the RPT files are stored wih default parameters and saved data. We need to let users just refresh the rpt files with latest db data and overwrite with the same rpt files. But this code keep showing The application server failed mesg. when the refresh icon of viewer is clicked.
Attaching the code as it is not properly attached in my previous reply ...
=======================
Begin - aspx.cs code
=======================
using System;
using System.Data;
using System.Data.OleDb;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.CrystalReports;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
public partial class _Default : System.Web.UI.Page
    private ConnectionInfo connectionInfo = new ConnectionInfo();
    protected void Page_Load(object sender, EventArgs e)
        if (!IsPostBack)
            //ConfigureCrystalReports();
    protected void CrystalReportViewer1_Init(object sender, EventArgs e)
        ConfigureCrystalReports();
    private void ConfigureCrystalReports()
        string reportPath = Server.MapPath(@"Reports\Report1.rpt");
        this.CrystalReportSource1.ReportDocument.Load(reportPath);
        CrystalReportViewer1.Visible = false;
        SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
        foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
            field.HasCurrentValue = true;
        //this.CrystalReportSource1.ReportDocument.Refresh();
        CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
        CrystalReportViewer1.Visible = true;
    public void ReportDocument_RefreshReport(object sender, EventArgs e)
        try
SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
            this.CrystalReportSource1.ReportDocument.SetDatabaseLogon("user", "passwd", "server", "");
            foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
                field.HasCurrentValue = true;
                field.AllowCustomValues = true;
                //field.EnableNullValue = true;
            this.CrystalReportSource1.ReportDocument.Refresh();
                   this.CrystalReportSource1.ReportDocument.SaveAs(@"C:\Inetpub\wwwroot\XsiteRpt\Reports\Report1.RPT", true);
        catch (Exception ex)
            Msg.Text = ex.Message;
    public void SetDBLogonForReport(ReportDocument reportDocument)
        Tables tables = reportDocument.Database.Tables;
        connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
        connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
        connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in reportDocument tables)
            TableLogOnInfo tableLogonInfo = table.LogOnInfo;
            tableLogonInfo.ConnectionInfo = connectionInfo;
            table.ApplyLogOnInfo(tableLogonInfo);
=======================
End - aspx.cs.code
=======================
=======================
Begin - Assemblies
=======================
<assemblies>
                    <add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Framework, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
                    <add assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
      </assemblies>
=======================
End - Assemblies
=======================
=======================
Begin - aspx
=======================
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Xsite.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
    Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
    <title>Refresh Report</title>
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
    <link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
        rel="stylesheet" type="text/css" />
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <asp:Panel ID="PanelMsg" runat="server">
        <br />
        <asp:Label ID="Msg" runat="server" Font-Bold="False" Font-Names="Verdana" ForeColor="Navy"></asp:Label>
        <br />
        </asp:Panel>
        <asp:Panel ID="PanelViewer" runat="server">
        <CR:CrystalReportViewer ID="CrystalReportViewer1" OnReportRefresh="ReportDocument_RefreshReport" runat="server" AutoDataBind="True"
            EnableDatabaseLogonPrompt="False" EnableParameterPrompt="False" ReuseParameterValuesOnRefresh="True" HasRefreshButton="True" Height="820px" OnInit="CrystalReportViewer1_Init" ReportSourceID="CrystalReportSource1" ShowAllPageIds="True" Width="1215px" />
        <CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
        </CR:CrystalReportSource>
        </asp:Panel>
    </div>
    </form>
</body>
</html>
=======================
End - aspx
=======================

Please help! Error -48 can't sync, tried everything!!

Hi
as above really, I have had my ipod 20gb clickwheel nearly 4 years and no problems, all of a sudden itunes has come up with this error message. I cannot take off or put songs onto the ipod, or move them around in playlists etc, but when not connected to my pc the ipod itself works fine.
Please help, I have tried most things such as unistalling itunes, error-checking the disk in my computer etc.
Has anyone got any other suggestions? I don't really want to restore the ipod as some of my music is not backed up, I manage it manually it that helps??

Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.

PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Please Help! Error message: Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number.???

My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7.
I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language.
My serial number is not accepted.
Error message: 'Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number'.
Customer help care is not helpful and keep ending my chat before I get a solution.
Can someone please help me and let me know how I can rectify this problem!!!

Thank you Benjamin MItchley. I reviewed the chat log and I can confirm that they are correct we do not provide installation support for Photoshop Elements 7 due to the age of the software title. Photoshop Elements 7 also does not support activation so there is no risk that you were unable to deactivate the software on your previous computer.
I am showing the serial number under your account was provided from an equipment manufacturer. It is possible there may have been a customized installer for that version. Have you contacted the computer manufacturer to obtain the installation files for the copy of Photoshop Elements 7 included with your computer?
Since you did not migrate/transfer over any files it is unlikely there is a software issue preventing the installation. You can try running the CC Cleaner Tool to ensure that no corrupt licensing files may be preventing the installation process. You can find details of the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Urgent ..Please Help .Geting error URI too long

I have a jsp page and it has a text area. When I am inputing shorter
text it works fine but when I am putting longer text I am
having an error that "Get is not defined" and in the http server error
log I am getting URI too long error.
The text area when submitted...supposed to invoke a servlet which(the servlet) will do some error checking on the input text.
How can i overcome this limitation of http server ?
Please help ...
Thanks.

I tried with post method but still get the error.
Here is my jsp code..
<form name="inputnews" method="post" action="validation">
<table>
<tr>
<td width="600"><img src="//www.ibm.com/i/c.gif" width="600" height="4" alt=""/>
</td>
</tr>
and here is the servelet(name validation) code:
public void doPost(
     javax.servlet.http.HttpServletRequest req,
javax.servlet.http.HttpServletResponse resp)
     hrows javax.servlet.ServletException, java.io.IOException
          System.out.print("i am in post");
          HttpSession session = null;
          String flag3 = "";
          String check = "checkok";
          Info info = null;
          String category = req.getParameter("category");
          String title = req.getParameter("title");
          String content_area = req.getParameter ("content_area");
*** the content_area is the text area where user put long input
Anything i am missing here ?

PLEASE HELP - how to read a crash report

Please help!
I recently wiped my mid 2010 MacBook Pro clean and rebooted from scratch. I used Time Machine to get my material back up and running and it works fine except it crashed on occasion (1-4x p/week) - I am a professional DJ and I fear it will crash during a gig (fortunately it hasn't yet). I am clueless as to what is happening, however I have copied the crash report and am posting it below. Any and all help would be GREATLY appreciated.
As for specs, I am running OS X 10.9.1 with an i7 2.66 processor, 8 GB of memory, and a 750 GB hard drive.
Thanks in advance!
Anonymous UUID:       49E3B62D-9B24-8BC5-09FB-33DAA0CA5C29
Mon Mar 3 21:17:23 2014
panic(cpu 0 caller 0xffffff7f9b77cfac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0x0a2910de 0x00100000 0x00000000, BAR0 0xd2000000 0xffffff812d4ac000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff810a413140 : 0xffffff8019422f69
0xffffff810a4131c0 : 0xffffff7f9b77cfac
0xffffff810a413290 : 0xffffff7f99ef853d
0xffffff810a413350 : 0xffffff7f99fc4d9e
0xffffff810a413390 : 0xffffff7f99fc4dfc
0xffffff810a413400 : 0xffffff7f9a2495be
0xffffff810a413530 : 0xffffff7f99fe8d41
0xffffff810a413550 : 0xffffff7f99eff08d
0xffffff810a413600 : 0xffffff7f99efcbae
0xffffff810a413800 : 0xffffff7f99efdaf6
0xffffff810a4138e0 : 0xffffff7f9adfaba2
0xffffff810a413920 : 0xffffff7f9ae0a55f
0xffffff810a413940 : 0xffffff7f9ae3851b
0xffffff810a413980 : 0xffffff7f9ae3857b
0xffffff810a4139c0 : 0xffffff7f9ae0fff5
0xffffff810a413a10 : 0xffffff7f9addbd3e
0xffffff810a413aa0 : 0xffffff7f9add7cc7
0xffffff810a413ad0 : 0xffffff7f9add5816
0xffffff810a413b00 : 0xffffff80198cb873
0xffffff810a413b90 : 0xffffff80198cd76f
0xffffff810a413bf0 : 0xffffff80198cb28f
0xffffff810a413d40 : 0xffffff80194b6008
0xffffff810a413e50 : 0xffffff8019426bb1
0xffffff810a413e80 : 0xffffff80194139b5
0xffffff810a413ef0 : 0xffffff801941e003
0xffffff810a413f70 : 0xffffff80194c921d
0xffffff810a413fb0 : 0xffffff80194f3e26
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7f9b76f000->0xffffff7f9b781fff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7f9b767000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f99d24000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f9b76a000
         com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000->0xffffff7f9a116fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f99e97000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
         com.apple.nvidia.classic.NVDANV50HalTesla(8.1.8)[3666E0FC-87C7-3329-BD8C-2F1ADE D100A4]@0xffffff7f9a121000->0xffffff7f9a3cdfff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
         com.apple.GeForceTesla(8.1.8)[7DAF283F-6FD3-3783-B3CC-D23964F1B9B8]@0xffffff7f9 adba000->0xffffff7f9ae84fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f99aba000
            dependency: com.apple.iokit.IONDRVSupport(2.3.6)[86BA68C6-18DD-30A1-ABF6-54597AD6C277]@0xff ffff7f99e97000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7f99e54000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.1.8)[0A1B6F41-168D-307A-BABD-162F3B3 C2786]@0xffffff7f99ea7000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000019200000
Kernel text base: 0xffffff8019400000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 1827669571313
last loaded kext at 253114324646: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9b87f000, size 65536)
last unloaded kext at 313525964965: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9b87f000, size 57344)
loaded kexts:
com.serato.usb.kext          2.3.0
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AGPM          100.14.11
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleHDA          2.5.3fc1
com.apple.GeForceTesla          8.1.8
com.apple.driver.AppleMikeyDriver          2.5.3fc1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelHDGraphics          8.1.8
com.apple.driver.AppleIntelHDGraphicsFB          8.1.8
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.AppleUSBCardReader          3.3.5
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.kext.triggers          1.0
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.driver.DspFuncLib          2.5.3fc1
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.nvidia.classic.NVDANV50HalTesla          8.1.8
com.apple.nvidia.classic.NVDAResmanTesla          8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleHDAController          2.5.3fc1
com.apple.iokit.IOHDAFamily          2.5.3fc1
com.apple.iokit.IOSurface          91
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
com.apple.iokit.IOUSBMassStorageClass          3.6.0
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x857F, 0x483634353155363446373036364700000000
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x857F, 0x483634353155363446373036364700000000
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST750LX003-1AC154, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:

Quadi_414,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Your GPU panic suggests that yours could be one of them. Apple had a gratis servicing program for this defect for three years from the date of purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis.

Export Layers as Files - Please Help on Error Message

Hi, Not sure if I'm doing the right thing anyway, but I'm trying to export all the layers in one file as separate JPGs. Each layer has its own name and ideally, i would like to save each layer as its layer name.
When I choose the script 'export layers to files' it flashes on each layer and then eventually comes back with the error 'Specified value greater than maximum allowed value'.
Does anyone have any idea of what this means? I have no real knowledge of scripting, it was just that this option sounded like it would do exactly what I needed!
Thanks in advance,
Gill

Hi and Welcome to the Community!
With only that limited information (e.g., no organizer app nor version, no version of the Desktop Software, etc.), all I can think to do is provide this:
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help app error 523

ive got a bb pearl 9105 and everytime i turn it on its come up with error messages then comes up with a white screen that says error 523. i cant plug it into my comp as the charge port is broken and cant get rid of the error messages to activate the bluetooth.
anyone could any ideas?? ive tried reseting it, taking battery, sim,memory card out and nothings doing the trick...please help...

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Unfortunately, the actual remedy may well require connection to your computer...but with the port broken, that won't be possible. So you won't be able to fix this without seeking formal hardware-level support.
If you remain in warranty, you should seek out support via that channel. If you have no warranty, then you would seek out a local (to you) shop with qualified BB hardware technicians who can give you a proper diagnosis and estimate.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help! error -61399, how to create custom vi for every input in project explorer

Please help! I have been trying whole night but couldn't get through it.
I am creating custom vi to simulate cRIO inputs on development computer. ( FPGA target>>execute vi on>> development computer>>custom vi) I then follow tutorial creating test benches:
Tutorial: Creating Test Benches (FPGA Module)
but when I run fpga vi I get error -61399, input item/node is not supported (input item/node is my input which I've added from project explorer).
The closest I got in my research on why this error is occuring- I have not connected all inputs/outputs in project explorer to custom vi. I followed tutorial exactly step by step but still I couldn't get through it.
Please help! Please help!
In order to do further investigation, I converted custom vi to a state machine , please find attachment. Having highlight execution on, it clearly demonstrates that input in cRIO are not being selected as a result default cases execute.
Please find attached modified custom vi with state machine, fpga vi, and original custom vi.
Best regards
Ta
Attachments:
custom vi.vi ‏32 KB
inverter.vi ‏16 KB
original custom vi.vi ‏22 KB

Solution:
You will see this error if no Custom VI has been selected or the Custom VI has not been configured for every I/O item that you are using in your FPGA code???
I think that's exactly where I'm stuck!
How do I configure it for inputs??? My attachement show that I have done everything being asked in tutorial!
Thanks!

PLEASE HELP ME, ERROR!!!

Hello,
A few weeks ago, I bought a new game for my Ipod Video 30 GB, Texas Hold'em, but, since then, i've been getting an error if I want to synchronise songs or games to my iPod (-50)
http://img441.imageshack.us/img441/1001/errorad5.jpg
Look at that image, the errors translation; "The iPod from Stephen cannot be updated, there is an unknown error (-50)"
Can someone help me please with this problem? :'(
Greets Xios (Belgium)

PLEASE HELP ME!!!!

Please help, urgently Error 1 occurred at Scan From String (arg 1).

I am communicating with the AT Trainer 5000 via serial port to USB converter.
I installed all drivers of converter successfully and it is shown in MAX as com port. I also installed VISA software.
I am using labview 2013 version.
When I connect the hardware to PC via usb to serial converter, try to run the program for seeing of real time graphs, I am receiving this error Error 1 occurred at Scan From String (arg 1) whereas there is no waveform shown in waveform chart.
Also read buffer didn't show an incoming data at read buffer.
Other details for this error is
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
Also pics of error is:
Program is also attached. Please checked the also.
Expert please help me how to get rid of this error.
Attachments:
Project.vi ‏23 KB

duplicate post http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Error-1-occurred-at-Scan-From-String-arg-1/td...

Please help me Error on install ePrint process on window8.1

I attemp to install ePrint on my Surface3 OS window8.1 but finally ERROR I dont know what going on and how solve the problem. Please help me.

Hey , Welcome to the HP Support Forum. I understand that you're unable to install the HP ePrint app on your Windows 8.1 Surface. I would like to help. Which HP printer model are you working with? If your printer is web-connected and ePrint compatible you might find this approach to printing from the Surface works. The ePrint app is not compatible with the Surface, yet, if you click here you can access the steps to need to enable ePrint and learn how to use the ePrint via email method. Please let me know which printer you have, and if you have any additional questions I can provide a more detailed accounting of all the ways you can print with your device combination. Lastly, click here to learn how to scan using the HP AIO Remote. If I have helped you resolve the issue, feel free to give me a virtual high-five by clicking the 'Thumbs Up' icon below and clicking to accept this solution. Have a great day!

Please Help! Bizarre error... read on!

Similar Messages

Maybe you are looking for