Please help - Can I start my use of Adobe Muse when I choose? I have purchased a month by month

Hi, I have purchased a month by month subscription to creative cloud to use Adobe Muse.  I only want to use it for a month though.  I have not used it yet but I need to know when my 'month' actually starts - I assumed it would start when I initiated the program and was ready to use it!?
I have downloaded the program (Adobe Muse) and left it - assuming it would only begin my 'month use' when I started up the program (as in a 30day trial)
My account is due to automatically renew my subscription soon (which I didn't realise either - I figured I paid once for a month use!) and I will be charged for another months use now - however, as you can understand by now, I want it to start when I want to use it! - not as soon as I have purchased a month by month subscription (hope that makes sense)
What are peoples thoughts on this and is there anything I can do allowing me to activate 1 months use for one months paid for subscription?
My fear is that I will have paid for one month that is neraly over and I havn't even used the program yet!?
Please advise!

Hi munzafeedback,
I have checked your order registered under your email ID posted here, it has a muse single App CC purchased on September 23rd 2013,
You have not yet activated it, the billing date is 23rd of each month(you will be charged on this date irrespective of the fcat that you are using it or not).
Incase you do not want to use it now, please get it cancelled as it is within 30 days of purchase.
If you plan to cancel it after 3o days of purchase, the subscription will attract cancellation fee .
Please go through the cancelation detail at :
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
Regards
Rajshree

Similar Messages

  • Can Wowslider effects be use in Adobe Muse?

    Can Wowslider effects be use in Adobe Muse?

    Hi Stewart,
    Please refer to the following link http://forums.adobe.com/message/5250998#5250998
    Regards,
    Aish

  • Please Help! Received an error message in Adobe Muse stating file cannot be opened.

    I am worried my Adobe Muse file is long gone. Adobe Muse crashed on me in the middle of designing a website. I tried to re-open the file and it states This Adobe Muse site file cannot be opened. no records in main.active table. I am not sure what to do. Pleae help!!

    Next to the file you were attempting to Save As to when the crash occurred, you should find a file with the same name but ending in "renamed" plus some numbers. Delete the unopenable flie and change the name of the "renamed" file to be the original file name with a .muse file extension. You should find it's the original file you had opened.
    Are you working with the .muse file stored on a file server? Or is it on a local drive?

  • Can anyone please please help - Can't start up at all!

    Hi,
    I've only had my ibook for a few weeks and came back to it after 24 hours to find it frozen. I turned it off, managed to get a grey screen with apple symbol, tried single-user restart with fsck which told me I had an HD volume error which it couldn't repair. I then tried the install disk OS9 but it wouldn't start in safe mode. Then I pressed C and restarted and now I have Mac OS X log in screen up but it won't accept my password. I am DESPERATE - with a dissertation to finish. Can anyone help please?

    Agreed,
    Failing is not a good sign at all.
    <hr></hr>
    Helenah-
    I suggest bring it to your local Apple Store/Reseller and have it checked out by an Apple Certified Technician. To be honest, I am surprised your S.M.A.R.T. status is failing after a couple of weeks. Your iBook should be covered by Apple's One (1) Year Limited Warranty, but it really depends on the circumstances. The warranty doesn't cover damage inflicted by the consumer*. Do you have an external hard drive? You may want to invest in an external hard drive for backing up your computer. There a many reasons for getting one; let us know if you would like suggestions or reasons why to invest in one. You should probably backup your computers hard drive before bringing it to the Apple Store. You may want to look at Knowledge Base Document #106941 which has examples on How to back up and restore your files. Do you have access to another Mac? You can transfer files from your iBook via Target Disk Mode (the other Mac needs FireWire). You may want to look at Knowledge Base Document #58583 on How to use FireWire target disk mode for more information.
    Jon
    * I am not an Apple Certified Technician nor have I seen the iBook in person, so I can't promise you that the warranty covers it.
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Please Help - Can't load latest version of Adobe Flash Player

    I just purchased an iMac OS X version 10.7.3. 
    My kids keep trying to play games but are prompted that they need to download Adobe Flash player.  I follow the prompts for the latest version, but no luck.  It says it's successfully installed.  When I go to system preferences and click on the flash player, it says "plug in version 11.2.202.228 is installed" but when I click the "check now" box and it tales me to the Adobe websitem, under version information it says I have 9.0.124.0 installed?  I have uninstalled and reinstalled countless times to no avail. 
    Any ideas?

    Hi ...
    Quit your browser.
    Open System Preferences > Flash Player then select the Storage tab. Click: Delete All
    Select:  Delete All Site Data and Settings
    Then click:  Delete Data
    Relaunch your browser.
    If that didn't help, uninstall the Flash plugin then reinstall new >  Troubleshoot Flash Player | Mac OS
    Then launch your browser and empty the cache. If you are using Safari, from the Safari menu bar click Safari > Empty Cache.
    Then try a video.

  • Please help, can't get lastest version of Adobe Flash to work.

    It is installed on my computer as it shows in my programs folder and it is enabled  but it is not being recognized as installed.  Is there a problem with your installation program?
    Please tell me how to fix.
    Thank you.

    Enabling Flash Player in Internet Explorer
    ActiveX Filtering in Internet Explorer

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • When I try to open my applications, they won't open. I can only open them by right click open. Please help. I need to use this for school.

    I can open files on my desktop and I can only open them by right click then open. Please help ASAP. I am using this MacBook for school. Pls help asap

    Macbook Pro
    System Preference > Trackpad > Point and Click
    At the bottom adjust the Tracking Speed slider.
    Best.

  • PLEASE HELP making a program that uses sudo commands

    hey
    is there anyway to make a program run sudo commands
    i have a problem because in a terminal it would ask you to input a password.
    is there a way to use a fake keyboard program to input the password in the back ground
    of my java application or some how run sudo commands? my application relies on some outputs of these commands.
    please help thanks.

    ill tell you a bit about my program im making.
    i have a wireless usb that i have to switch back and forth to get my paticullar drivers to
    do certain things e.g. one is for web browsing and the other one has packet injection.
    by typing sudo modprobe ect.. i can switch through a terminal. which requires me to type in a password.
    iv made a application which uses the
    Runtime.getRuntime().exec("sudo ...."); it has 2 buttons to switch from diffrent drivers and always runs at start up.
    just a big problem i cant use sudo it just freezes when i start and click on the buttons. and doesnt ask me for a password.
    can anyone help thanks

  • Can not start HTTP_server using "opmnctl startall" after applying p4505133

    After I apply patch 4505133 on win32
    10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
    I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
    [Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
    [Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
    Any idea what is going on?
    thanks,

    Thanks for u r reply.
    resolved this issue
    oracle/middleware/oracle_idm1/bin
    oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
    it worked.
    Thanks and Regards,
    sri485.

  • How can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong :(

    how can i start to use i chat if it said my password is incorrect and i change it, but still appears that the password is wrong

    Hi,
    AIM
    If this is a Name valid with the AIM servers the password has to be 16 characters or Less.
    The Apple IDs from MobileMe and @Mac.com allow you to create (And prompt your for ) Longer passwords.
    These Names are Valid with the AIM servers but they cannot process the password.
    Use iforgot to Change the password to something shorter.
    Googletalk
    If you are using a Google ID then you have to enter your Google ID as it appears when you log in to the Google Web Mail Page.
    The Mail App seems to allow the Endings (@gmail.com and @googlemail.com) to be used almost interchangeably where as the Jabber Server Google run for Google Talk is stricter (so iChat needs to be precise).
    Also the chat option needs to appear in the Web Mail page.
    If it does not it needs Enabling on you Google Account settings page.
    8:10 PM      Tuesday; July 5, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    Hi hayscart,
    This article contains steps to try when you are having trouble with the iPhone's speaker:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Ari

  • HT4623 hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

    hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

    Connect it to iTunes on a computer and update it from there.
    (73609)

  • Please help: Can't download itunes with windows 7 (64 bit).  Keeps freezing at 99%

    I have tried deleting and re-installing itunes and quicktime but it still won't work.  Please help.

    Can someone please respond to my request for support?  I tried the provided correct answer at https://discussions.apple.com/message/11561783#11561783  but it did not work. 
    I also got a MSFT tech support person to remotely look at my machine, for what its worth, he said the registry file is fine and to contact Apple support.
    Any help would be very much appreciated.

Maybe you are looking for