Please Help. CD Burner problems internal and external

I woke up this morning and my mac doesn't recognize my Yamaha CD burner (been working fine for 6 years) and anything I try to burn on the inernal Pioneer drive sometimes works and sometimes gives me strange messages like:
Sense Key = HARDWARE ERROR (the E on hardware is not a mistake)
Sense Code = 0x44, OxA1
INTERNAL TARGET FAILURE (the capital letters is how it reads)
It's all so sudden I find it hard to believe that both burners would act up on the same day.
Thanks for looking
Gerry

I just had this exact same problem. Apparently, iTunes cant burn certain songs. I don't know why yet, it just can't. I went through the play list and deleted one song, then tried to burn the disk. If I still got the error message, I put the deleted song back on the play list, deleted the next song, and tried to burn it again. I just went through and did this to every song until it worked. So far its only been one song that couldn't be burned.

Similar Messages

Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Subject:
Please help , I have iPhone 4S and have updated to iso6, don't know if that has anything to do with the problem but I can't set the year on date and time to the correct year, it automatically goes to 2578 ? Plz help

Settings>General>International.
Set the calendar to "Gregorian". You have it set to Buddhist.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

Internal and external DVD burner ?

Hi all, have a general question, currently have a HP ProBook 6455b, obviously has an internal DVD burner.. I am looking to add an external DVD burner...is this possible to run an internal and external at the same time? would I need additional burning software? Burning is quite slow takes over an hr to burn one DVD, currently using Windows DVD burner because it is simple and effective.. or should I just use another program that is quicker? any ideas or suggestions on fast burning programs? thanks you guys are the best!

You're very welcome.
I have never burned a movie with mine but I have burned large 3+ GB ISO images using CD Burner XP, and it takes just a few minutes.
Now, if you mean can you insert a disk in one drive, and copy that disk via the other drive using the same program set to copy or grab disk, that should be possible.
It should show one drive as the one to copy from and one to copy to, just like if you had two DVD drives in a desktop PC.
If you are asking can you simultaneously burn two different files on two different burners using the same program at the same time, that I have no clue. I guess you would have to try it and find out. You would open the program and burn one file to a disk and open the program again and burn another file to the other DVD burner. If the program won't let you open two instances of it at the same time, then you probably could open a different DVD burning program such as the one I posted above and use that to burn the other files with.
Paul

Specification documents o internal and external programs documentation

I have to make some changes in the specification documents o internal and external programs documentation. I want to know i there are defined some standard conventions about the technica objects name and the requirements documentation.
We have made some formats, but we have seen change resistance=2 The problem is the amount of information required in these ne formats that we think is important and will help to reduc ambiguity and to avoid backworks but it's going to ad activities to the developers.

. Ours is bit different to what she sampled but the standardization differ from the team implementing it. You must also come out with the pattern for program "pre" and "post" documentation.
1. Before the actual coding of the program, you have to specify the estimated number of mandays needed for the analysis, coding and documentation. Don't forget to add n% for the buffer. (In our case, we use 30% buffer). Then update the form by putting on the other column the actual mandays consumed. There should not be cases that estimated < actual mandays. If problem is encountered that may cause delay, inform team lead to adjust the estimated mandays.
2. Create a form that will specifically states the unit testing made (eg. Test case, test data, how the test is perform, outcome of testing, rating: pass or fail, etc.)
3. After coding, specific program specification (eg. logic of the program, tables created, function module used, authorization checking, etc). Please be reminded to put result of "program extended syntax check" (tcode: slin) and "run time analysis" (tcode: se30) if applicable.
4. And initial code review must made also. If proper ABAP coding is incorporated and obliged by the program. If the proper naming convention that you implemented is followed by the program...so on and so forth.
hope you'll get some ideas out of it.
cheers,

Add account fails both internally and externally, but autodisover is working

Recently our internal DNS zone was deleted on remote DC and the change propagated to all of our DNS server. I was able to make a copy of zone and restore it. The Exchange server is back online and working for existing machines, but when we attempt to add
a users profile to a new machine or a remote machine the auto setup fails. I am not sure if it is DNS related, because our external DNS was not affected, but I wanted to mention it because I think it has something to do with problem. The following happens
now:
It finds the user.
Fails to logon:
Tells me I must provide the mail serve name
When I click on check name it tells me the name cannot be resolved.
I have been banging my head against the wall here, because both internal and external exchange connectivity test pass. Also,
I cannot find anything in the event logs that looks related. Any ideas?

Hi,
Please refer to the following article to troubleshoot the issue:
Outlook: Unable to perform a Check Name or connect to an Exchange mailbox
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

Exchange 2010 and 2013 coexistence Internal and external URL

Hi all,
been reading alot of threads about Outlook anywhere and virtual directories in co-existence exchange 2010 and 2013.
Still i dont get any smarter.
Here is scenario:
Exchange 2010
Cas1
Cas2
Mailbox1
Mailbox2
Casarray is Exchange.casarray,com ( internal dns pointed to CAS1 in exchange 2010).Seems like by default both exchange 2013 cas servers are added to the casarray.
Exchange 2013
CAS+Mailbox
Cas+Mailbox
DNS
mail.exchange.com pointing to VIP (kemp loadbalancer)
Autodiscover ( pointed to same vip ,kemp load balancer)
Outlook anywhere on all servers (2010 and 2013)
Internal ( pointing to VIP on Kemp)
External ( pointing to external IP,then it passes firewall that again passes to kemp)
Problem we are having is when migrating users from Exchange 2010 - 2013.
Users using Outlook 2010
restart of outlook and mail works fine.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Users using Outlook 2013
Outlook in disconnected status,only fix is to create new profile.
OWA works fine
Active sync fails ( need to inherit permission of users AD object),wait couple of hours then mobile can sync again.)
Question is,what should be set for internal and external url (active sync,owa,ews)on 2010 and 2013 servers?
Where is the config wrong?
Thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Martina,
did the test as mentioned,even tried both CAS 2013 servers.Flush and registerdns didnt help.
Still Outlook is Connected to the cas.exchange.as (which again Points to 1 of Exchange 2010 servers),
Tried repair Outlook profile,no og.Only fix is to setup New account.
Any more tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Reverse proxy for internal and external

Hello,
BM1 is our main BM3.9 Box. I have reverse proxy configured for webaccess and to release emails from our spam filter externally (this works). This BM server also is our external DNS, and our default route for Internet traffic.
Another BM box is our internal DNS.
I need to modify BM1 config to enable client internally to release emails from our spam filtering software. The error issued is 504 Gateway timeout.
Do I just add the internal ip address to the BM1 accelerator entry meaning that the same accel will listen for both internal and external addresses ?
Any help is appreciated
Regards
Brian

bdavis97,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

SharePoint 2013 - Office Web Apps - Internal and External Use

I have successfully installed SharePoint 2013 and Office Web Apps on Azure VMs inside an Azure Virtual Network (IaaS model). Everyting is working well. However, my testing has shown that external users and internal users can't use Office Web Apps at the
same time.
Office Web Apps, installed on its own vm, accomodates an external and internal URL quite well. However, SharePoint 2013 appears to only allow one setting for WOPI Zone, either internal or external but not both. I've set the WOPI zone to Internal-HTTPS (Set-SPWOPIZone
–Zone “internal-https”). OWA works just fine if accessed from inside the Azure Virtual Network. However, if I try to access from outside the Virtual Network, from the Internet, Office Web Apps fails. The exact oppisite is also true. I can set WOPI Zone to
External-HTTPS and accessing from the Internet works fine, but accessing inside the Virtual Network fails.
Am I missing something? I, obviously, want Office Webs Apps to function properly for both internal and external users simultaneously.
I appreciate any help anyone can provide here.
Glenn

Hi Glenn,
To have both the use of Internet and Internal available to your end-users, you first need to configure AAM setting. Open Central Administration > Application Management > Configure alternate access mappings. Let's say there is an existing web application
named http://sharepoint and my end-users from local network are able to access it using the URL http://sharepoint (root site collection). Here you need to add the Internet URL by select the web application and click Edit Public URLs. Add the Internet domain
to the web application, e.g http://sharepoint.abc.com. You don't necessarily have to edit binding setting in IIS. Before continuing next steps, make sure you are able to access http://sharepoint.abc.com from the Internet while being able to access http://sharepoint
from local network (aka Internal).
On the machine where Office Web App (OWA) Server 2013 is installed, open PowerShell to add OWA module and use the following command to re-create a new OWA server farm if you've completed configuring it previously.
New-OfficeWebAppsFarm -InternalUrl "http://owa" -ExternalUrl "http://owa.abc.com" -EditingEnabled.
In this case, I'm not using SSL certificate to encrypt data over the Internet. You can use Internet-public IP of the OWA server like -ExternalUrl "http://198.xxx.xxx.xx". Add CertifcateName parameter if you want to use whether CA-issued certificate
or self-signed certificate.
On your SharePoint machine, you need to re-bind all WFE machines to WAC farm using the cmdlet New-SPWOPIBinding. Next, you need to set the WOPI zone for both internal and external.
Set-SPWOPIZone -zone "external-http"
Note: I'm not all using certificate in my guidance. But the steps to have it configured is just to add more parameter.
I've recently successfully deployed OWA multi-server farm for both internal and internet uses for two big clients. In real-world scenario, ideally OWA should be published through firewall (Forefront UAG, TMG, F5...etc). Please let me know if you still have
issues after following my steps. My email: [email protected]
Regards,
-T.s
Thuan Soldier
A 23-year-old man loving Microsoft technologies and making crazy ideas on business journey.
SharePoint Vietnam |
Blog | Twitter

Front End internal and external web services

Hi all,
Can someone explain the purpose of internal and external web services URL in front end server. what does it do and what is it used for? and why the external traffic goes directly to it and not through reverse proxy?
Thanks,

They're for multiple purposes. Address books, autodiscovery, meeting urls, mobile clients, etc. There are two because they respond slightly differently based on whether the client is internal or external. External traffic should always reach
it through a reverse proxy, that reverse proxy should proxy traffic received on port 443 to port 4443 on your front end pool.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Internal and External application tier File move

Hi all,
I am new oracle apps R12 with 3 tier instance.
We are created the oracle apps R12 instance with 3 tier. Two tier is Application tier and one tier is Database tier.
The data base tier is common for both application tier. The issue is, we are moved the all customized Development works into only one application tier (i.e. Internal tier). So we are not moved the all customized Development work into second application tier (i.e. External tier).
My question is, we are not moving all customized work into both application tier means , is there any issue will occur ?
How can we handle my customized works both application tiers( i.e. Internal and external tiers) ?
Please help,
Thanks,
Prab.

Hi;
They are questioning me why we have to do that.Answer is easy, You can mention for ebs stability all nodes should be on same level :) If they push you more please show metalink notes which is already sharing by Hussein Sawwan. If they still persist say them you will go wiht SR and confirm wiht support ;)
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Internal and external switches on server 2012 r2

this is driving me nuts.
I have a vm with an internal and external switch.
I am trying to get backups to route to the host machine using the internal switch only.
I've gone all over priorities and the routes are all fine but the data will constantly go over the external switch.
If i disable external switch traffic goes over internal switch just fine.
I've read about the automatic detection of least cost routing on the internal switch but just can not get it to run correctly.
please help
Doug

All settings below.
backup traffic should run from 192.168.200.4 > 192.168.200.2 over internal NIC
VM Settings
Ethernet adapter Ethernet 3:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter #3
Physical Address. . . . . . . . . : 00-15-5D-37-0E-04
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.200.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
Physical Address. . . . . . . . . : 00-15-5D-37-0E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.100.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DNS Servers . . . . . . . . . . . : 192.168.100.3
NetBIOS over Tcpip. . . . . . . . : Enabled
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.1 192.168.100.4 261
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.100.0 255.255.255.0 On-link 192.168.100.4 261
192.168.100.4 255.255.255.255 On-link 192.168.100.4 261
192.168.100.255 255.255.255.255 On-link 192.168.100.4 261
192.168.200.0 255.255.255.240 On-link 192.168.200.4 276
192.168.200.4 255.255.255.255 On-link 192.168.200.4 276
192.168.200.15 255.255.255.255 On-link 192.168.200.4 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.100.4 261
224.0.0.0 240.0.0.0 On-link 192.168.200.4 276
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.100.4 261
255.255.255.255 255.255.255.255 On-link 192.168.200.4 276
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.100.1 Default
===========================================================================
HOST Settings
Ethernet adapter vEthernet (Internal-NIC):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 00-15-5D-37-0E-02
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::744b:bbc1:e067:5592%48(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.200.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.240
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 805311837
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet Host:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331FLR Adapter #4
Physical Address. . . . . . . . . : A0-D3-C1-05-24-BF
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::3412:1255:61dc:3e3c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DHCPv6 IAID . . . . . . . . . . . : 211866561
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : 8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet Host:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : HP Ethernet 1Gb 4-port 331FLR Adapter #4
Physical Address. . . . . . . . . : A0-D3-C1-05-24-BF
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::3412:1255:61dc:3e3c%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.100.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.100.1
DHCPv6 IAID . . . . . . . . . . . : 211866561
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1B-15-79-97-A0-D3-C1-05-24-BF
DNS Servers . . . . . . . . . . . : 8.8.8.8
NetBIOS over Tcpip. . . . . . . . : Enabled
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.1 192.168.100.2 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.45.46 276
169.254.45.46 255.255.255.255 On-link 169.254.45.46 276
169.254.255.255 255.255.255.255 On-link 169.254.45.46 276
192.168.100.0 255.255.255.0 On-link 192.168.100.2 276
192.168.100.2 255.255.255.255 On-link 192.168.100.2 276
192.168.100.255 255.255.255.255 On-link 192.168.100.2 276
192.168.200.0 255.255.255.240 On-link 192.168.200.2 261
192.168.200.2 255.255.255.255 On-link 192.168.200.2 261
192.168.200.15 255.255.255.255 On-link 192.168.200.2 261
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 169.254.45.46 276
224.0.0.0 240.0.0.0 On-link 192.168.100.2 276
224.0.0.0 240.0.0.0 On-link 192.168.200.2 261
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 169.254.45.46 276
255.255.255.255 255.255.255.255 On-link 192.168.100.2 276
255.255.255.255 255.255.255.255 On-link 192.168.200.2 261
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
0.0.0.0 0.0.0.0 192.168.100.1 Default
Doug Hardy

WLC Internal and External DHCP

I am currently using the Internal DHCP component within my 5508 Controller with software version 7.0.166.0. This seems to be working fine as the Vlan Routed interface connected to it via the Dynamic Trunk Port is functioning as l have the ip-helper command setup on this specific vlan interface..
My issue now is that we have a isolated ADSL Network which is configured off our Core 6513 but just as a Layer 2 Vlan so no traffic can be routed to other vlans.
With our new WIFI environment which consists of the 5508 Controller and numerous 3502 AP's we wont to utilize this ADSL vlan with our new WIFI environment.. This ADSL Vlan has a dedicated Linksys Router which is currently running DHCP and assigning addresses to clients at the moment..
What l want to do is configure the 5508 controller to use this ADSL vlan aswell but to also keep using the Linksys Router aswell for DHCP..
I have setup a new dynamic interface and added the ADSL Vlan ID to the Trunk port of the 5508 and also setup its own SSID. But for some reason l cannot get both the internal and External DHCP servers to work at the same time ? If l enable DHCP Proxy option on the 5508 the internal DHCP server works and when l disable DHCP Proxy the ADSL Vlan DHCP works through the 5508 but not the internal DHCP Server ??
Can l get both the internal and external DHCP servers to work in harmony or should l be focusing on using one method over the other ?

Hey Scott l have just tried configuring another scope for the L2 Vlan but it doesn't seem to be working when l add the ip address of the management interface which is the internal DHCP Server to the dynamic interface of this adsl network l have setup l dont seem to get a ip address within this scope ?
I am just wandering seeing it is just a L2 vlan without a routed interface would this be the problem and would need to set this up with the "ip helper-address" of the management interface ?
Cheers SG

Backup internal and external hard drives-TC and offsite

I now have Mavericks 10.9.3 on my iMac with a 2TB (1.25 TB used) internal hard drive.
I also have some external drives attached to my iMac with older iPhoto libraries and other files (total file sizes 940 GB and 505 GB). I primarily use Aperture now on my internal hard drive, but still access those iPhoto libraries on my external drives on occasion. I have Time Machine backup my iMac internal hard drive on my 2TB Time Capsule regularly.
My primary question is in regards to getting another copy onto a larger external drive that covers my internal and external drives so I can have a backup off-site. Online backup services seem to always exclude external drives. So a physical drive I can have offsite seems to be the best option.
A year ago I changed the destination of my Time Machine backup to be on a 3TB external drive (backed up iMac internal hard drive and the two externals). However, when I changed the destination of the backup back to the Time Capsule, the TM initiated a brand new backup (it did not recall that I had backed up prior to that on my Time Capsule).
I want to backup monthly, if not quarterly for my off-site storage. But, if every time I change the destination drive for TM, a new backup profile is created, it will overwork my drives unnecessarily.
Is there a backup program or a process on "disk utility" I could run parallel to TM that I just use quarterly capturing only the changes/additions in those few months for both the internal and external hard drives? Also, is there a way to add an external drive to my Time Capsule that is solely used to wirelessly backup the two externals on a regular basis (i.e. keep the internal 2TB drive backing up to the Time Capsule; and the external hard drive attached to Time Capsule via USB used as the backup drive for the external hard drives)?
Summary: I need to backup regularly to the local Time Capsule/additional external hard drive. The data will come from my internal hard drive and my two external hard drives. I also want to do quarterly backups of the additions/changes to all three drives to have on an offsite external drive that I manually backup to quarterly. Any help is greatly appreciated.

Carbon Copy Cloner is not on the App store.
Correct.. it is not approved because Apple do not like the fact that CCC (and most likely superduper) which are the most popular backup software for Mac because it makes a bootable clone. Apple will never approve of that. But let me assure you that is the genius of it. If the internal disk fails, you simply boot from the external. It is $40 but you can use on all the computers in your home.
CCC is a clone.. ie when it does the backup, any changes on the drive are changed on the clone. It does not work like Time Machine which simply piles up incrementals until the drive fills up. The idea of CCC is a backup of the drive as it exists at any point in time. TM btw is also not a reliable archive, ie it thins backups constantly.. so you should never rely on it to archive old versions.. but in the middle of a project it does a good job to keep various versions of your files. That is why I specifically said in my last post do not stop using it.
and you can keep using the TC just for the internal drive.
Keep TM running to the TC.. that will then keep a current hourly incremental of your drive. You can set CCC in a way which is a lot more flexible. ie backup just at the end of the day. There is no need for constant hourly backups. So to answer the second question.. you are still using your TC and TM.. but I suggest you only backup the internal drive.
Please read a bit from forum expert Pondini on the value of clones and TM.
http://pondini.org/TM/Clones.html
That's why many folks use both Time Machine and a bootable clone, to have two separate, independent backups, with the advantages of both. If one fails, the other remains.
Now the ports issue.
You can of course continue to use USB2. Just that moving large volumes around will be slow.. as doubtless you already know.
On your particular Mac since you missed out on USB3 which is a pain.. you can buy a Thunderbolt to USB3 adapter like the belkin.
http://www.belkin.com/au/p/P-F4U055/
I suggested the Thunderbolt to Esata (it is an older interface and the adapter is rather cheaper but I hear more reliable.. check reviews for both).
http://store.apple.com/au/product/H8875ZM/A/lacie-esata-hub-thunderbolt-series
Sata is the interface of the hard disk.. Esata just means external sata.. so it is native and without conversion.
I was merely suggesting ways to speed things up. But as long as you don't run CCC on more than daily basis then I think you will be fine just with USB 2. It will take a while on the day you do the swap over for the archive volume, but if you turn off the power saving in the Mac and leave it run overnight it should be able to do most of it.. you need to realise it will have to deep scan both the disks.. to compare files.. but CCC is based on Rsync and it is extremely fast and efficient. I am just not sure I know how long it will take to do. Anyway.. there is a plan.. tweak and adapt as you see fits your needs.

Please Help. CD Burner problems internal and external

Similar Messages

Maybe you are looking for