Please help, color printing problems.
I have snow leopard and just bought a new HP officejet 7500 wide format wireless all-in-one. The problem is when I Print from my boyfriend's PC, the pictures are fine but when I print from my imac, the image I see on the monitor isn't what is printed. The colors are off and the picture is way too dark. I've looked on the internet to try to find a solution but haven't really found one. Please help.
Hello
Driver from HP web site
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-86352-1 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
instruction for configurationn and use
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&tmp_task=setupCate gory&cc=us&dlc=en&lc=en&os=219&product=4083652&softwareitem=mp-86352-1&sw_lang=# N28
HP printer listing for os 10.6 support is not that clear but "HP Officejet Pro L7500 series" in on the list so you may not need to download driver from hp but only from apple
HTH
Pierre
Similar Messages
-
PLEASE HELP - COLOR SHIFTING PROBLEM on output NTSC monitors
http://www.smmlv.com/testproject/
Above is a link to a layered photoshop file that has a USA map and over a dozen network overlays used in a section of our video. I animate each layer on sepeartely in the video and have noticed a major problem recently, the color of the art does not hold true to placement. I created the art originally in Illustrator and then converted the file to Photoshop at 640x480, 72dpi. This has always worked perfectly in the past to display and animated artwork in FCP.
Right now, in FCP I am using the NTSC DV 3:2 frame size, and the compressor of DV/DVCPRO - NTSC. I have a JVC Profressional DV deck that hooks up through firewire and sends S-Video to my monitors. This setup has always given me a great picture even though it is not completely upcompressed. Using these settings and this art, the color lines on this map in red, light blue, yellow and purple all have a "color shift" to the left about 5 pixels. It makes it appear that the line is where it is in the file, but the color overlaying the line is offset to the left 5 pixels and transperant to about 50%. This occurs only when viewed on some TV's and NTSC monitors and projectors. The strange thing is, some monitors display the color aligned almost perfectly on these maps and other monitors and projectors show this "digital halo" of color shifting really bad. If I take the layered network overlays in these colors and color tint them to black or grey, white, light green, or even light orange, they no longer have the color shifting and the detail is perfect.
Is there any way to fix this problem? I have tried duplicating the sequence and setting the compressor to 8bit Uncompressed, and while my captured footage is not this compression, in theory the art should render at this higher resolution setting. This did nothing to solve the problem.
I also have tried using different Broadcast safe and Y/C corrector filters with different results. The Y/C filter allowed me to reposition the color problem and thus removing most of the problem, but also removing most of the color. Nothing else has allowed me to seemingly move the color into the proper possition.
What is causing this color shift on the displayed NTSC image?
In FCP 4.5 I can see my rendered video in the program viewer screen and besides the pixel compression appearing on the lines, overall the video looks great paused or even better when playing. Then you view it through my deck onto my Pro Sony NTSC 19" color monitor and it also appears great, with a slight color halo to the left of these colors, but the color in the lines are there. If you are a few feet from the screen and know what you are looking for you might see it, but doubtful. Then you view it using the same signal on a 17" Samsung TV and the color shifting makes the map and other art, like the clients blue logo, look horrible, with each color line appearing twice and offset left from each other as if you had double vision. Normally I would think it is the TV causing this, but then we tested this same movie on 2 differnt projectors. The $700 Epson projector displayed everything beautifully, again with only the slightest color halo to the left, but then the Panasonic $4000 projector made everthing in these colors look double vision again. What is going on???
One more thing to keep in mind, my color bars also show this problem with these colors as well as shot footage of these facilities. There are tall red poles in the shots and everything displays fine except for the red pole color looks like it's glowing off the pole to the left.
PLEASE tell me there is a solution to this.I have tried Degaussing, using filters, changing cables, and testing other monitors and systems on these monitors, everthing I can think of to solve the issue. Is it FCPo or is it the monitors?... or is it a signal strength thing. Can monitors and projectors shift color when the signal is read from a DVD or Mini DV Deck? Is there a fequency difference (Ie: 75mgz or 80 mgz) that might be causing the shift in some monitors and not so badly in others. But if this was true, how would some DVD's (like Baby Einstein DVDs that use really bright colors) display red and blue perfect using these same player and monitor, while my projects is shifting color? Doesn't that rule out the signal from the DVD player if other DVD's do not have this issue?
I have uploaded the original art used, an exported .jpg file from the FCP timeline and sample photos of 2 different monitors to show to show this problem as best I can. http://www.smmlv.com/testproject/
Someone out there must have had this problem before. There's no way a color shift problem like this with Mini DV has gone on this long without someone seeing it.
One last thing about what I have tried... I do understand that with editing in Mini DV instead of uncompressed or HD video I lose a bit of resolution (4:2:2) and I see this compression occuring in some of the areas in the video where these problems persist. But, I did remake the art and rerender this project in an 8bit uncompressed settings and then displayed that up on the screen and I get the same color shift. I keep going in circles trying to find the culprit that is causing the delema.
PLEASE HELP! There are large tours going through our facilities daily and the large screen projector is displaying this problem as well. Let's just hope they don't notice and that their TV's at home or office does not display it on our final DVD's made. -
Please help with Printer problem on MBP
I am running 10.5.1 and am trying to install the software to enable me to scan. I have tried from the original CD, but it doesn't work (i assume this is because it was meant for 10.4). I have also tried downloading from the website but the download always says something like "19mb out of ?" and then eventually the downloads errors out.
Is there any way i can get the scanner to work? can anyone upload this software to me? I know its a lot to ask but im not sure what to do.Don't know what to tell you, but I downloaded the file without any problem. Do you have enough space on your drive for the file? You may have a problem on your drive so you might consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Please help my printer talk to my computer. An error message pops up whenever I try to print. I have tried the firefox self-help on this topic and it doesn't work. I need direct help with this problem.
message is: "an unknown error occurred while printing" with the yellow icon and exclamation point. this is all it says every time.
-
Pavilion dv7-4060us Color Printing Problems...
I just bought a new Pavilion dv7-4060us Notebook and am having problems printing in color. I have a Xerox Phaser 8550DP PS Printer that I'm trying to connect to through a wireless network connection. I can find the printer on the network and install the "Xerox Phaser 8550DP PS" driver online just fine. But, after all that, when I try to print, it will only print in Black and White. For some reason it just will not print in color. I've looked through all my "printer properties" and it doesn't even show color options! It's like my computer just doesn't even recognize that the printer can print colors. Like maybe that printer's driver is for some reason not recognizing it as that actual printer?!
I tried deleting the printer and the driver off my computer and installing it using the printer's original CD, but it says it's not compatible with Windows 7 OS. But installing the driver via online and using the CD should basically be the same thing shouldn't it? So that can't be the problem. The "HP printer help website" doesn't really help at all because it's a Xerox printer and not an HP. After reading through some forum posts I figured maybe it was a firewall problem, but wouldn't the firewall stop me from printing all together...not just prevent me from printing color?
Has anyone seen this happen before or heard of anything like this happening? Right when I got the computer I kind of went through and deleted a few things I thought were Crapware, so the only thing I can think of right now is that maybe I accidentally deleted some kind of software program that lets me print color?! Which doesn't really make any sense, so I don't think that's it.
Also, I know it's not a Windows 7 OS problem or my wireless connection because my brother's computer uses Windows 7 and connects through wireless as well, but his can print color just fine. He set his computer up like a year ago so he can't remember how he set it all up or what he did, so he's kind of useless.
As of right now the only thing I can think of to do is try posting on this HP help forum and post on the Xerox Printer help forum and see if anyone has any advice for me. If you have any ideas I'm up for trying anything because I pretty much NEED to be able to print from this computer!! Any information can help out a lot so just let me know. Thanks!I have exactly the same problem with my dv7-4171us, my husband has the same printer and it print fine on my Xerox but mine only prints in black and white, its very frustrating. I called HP and after 2 hours on the phone they couldnt fix it either.
I'm thinking of doing a full "f11" factory restore. If anyone knows how to fix the color printing problem please let me know. -
My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M. -
[ETL]Could you please help with a problem accessing UML stereotype attributes ?
Hi all,
Could you please help with a problem accessing UML stereotype attributes and their values ?
Here is the description :
-I created a UML model with Papyrus tool and I applied MARTE profile to this UML model.
-Then, I applied <<PaStep>> stereotype to an AcceptEventAction ( which is one of the element that I created in this model ), and set the extOpDemand property of the stereotype to 2.7 with Papyrus.
-Now In the ETL file, I can find the stereotype property of extOpDemand as follows :
s.attribute.selectOne(a|a.name="extOpDemand") , where s is a variable of type Stereotype.
-However I can't access the value 2.7 of the extOpDemand attribute of the <<PaStep>> Stereotype. How do I do that ?
Please help
Thank youHi Dimitris,
Thank you , a minimal example is provided now.
Version of the Epsilon that I am using is : ( Epsilon Core 1.2.0.201408251031 org.eclipse.epsilon.core.feature.feature.group Eclipse.org)
Instructions for reproducing the problem :
1-Run the uml2etl.etl transformation with the supplied launch configuration.
2-Open lqn.model.
There are two folders inside MinimalExample folder, the one which is called MinimalExample has 4 files, model.uml , lqn.model, uml2lqn.etl and MinimalExampleTransformation.launch.
The other folder which is LQN has four files. (.project),LQN.emf,LQN.ecore and untitled.model which is an example model conforming to the LQN metamodel to see how the model looks like.
Thank you
Mana -
HT5312 i forgot my secret question, please help me this problem. Thanks
I forgot my secret question, please help me this problem. Thanks
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
And/or see the More Like This section on the right. -
Please help with slideshow problems!
Am using Photoshop Elements 8 and trying to make a slideshow. Have tried 4 times now and keep ending up with same problem, cannot reopen project to continue edititing. Won't show up in orginizer and when I find on harddrive and try to open get message " wmv file cannot be opened". How can I save a
slideshow inprogress and be able to reopen and continue to edit and make slideshow? I want to thank anyone who can help me with this in advance as I
have gotten so frustrated that I want to just scream.
ThanksThanks for the help, thought I had done so but maybe not. Anyway will have another go at it, now may I ask another
question? I am trying to add audio to slideshow. I have some music I purchased thru amazon as mp3 files but I get
message no codec and when I try to add wmv I get same message. What type of file do I need and how can I add
multiple songs to one slideshow. I have one little wmv file that will go in, but it just replicates itself multiple times until
it fills slide show.
Thanks again, sorry to be a bother, but this thing is driving this old man crazy.
Date: Sun, 26 Dec 2010 20:34:32 -0700
From: [email protected]
To: [email protected]
Subject: Please help with slideshow problems!
You need to save the slideshow project in order to be able to go back later and make changes or additions to an existing slideshow . The wmv file is a final output format.
Now you are most probably using only the Output command: that is what makes the wmv file.
You should also do the Save Project command. (and I make it a practice to do the Save Project command before I do the Output command).
If you look at the Elements Organizer 8 Help, there is a topic on "Create a slide show".
-- Very close to the beginning of that topic is a screen shot of the Sldie Show Editor screen,
-- The bar below the usual menu bar is labeled with a "B" and called the Shortcuts bar.
-- The 1st entry on that Shortcuts bar is "Save Project"
It is the Save Project command that saves the information about which photos, audio, etc you placed in that specific slide show so that you can come back again to do subsequent editing. Save each Project with a unique name.
After completing the Save Project command, you shoud see an "icon" in the Organizer for that slide show.
Note: you must also keep the photo files and audio files which you have used in this slide show: you can't delete them because the project file does NOT contain a copy of the photos, it only has the identification and folder location of the photo and audio files.
> -
PLEASE HELP! - Printing Yellow on Brown Kraft Paper
Please, please help!! I am sooooo frustrated right now! For starters, I'm a bit beyond intermediate Photoshop user (10yrs of habitual use). I NEED to print yellow on brown kraft paper. There's no alternative. I have to or I'm going to have one VERY upset client. Really hoping someone out there can help me very soon or it's going to cost me lots of $$$ when I have to fake it and print the entire brown kraft-pattern background on white paper just to get the yellow to show (picture one, small yellow key on a full sheet of brown kraft paper)
Here's the skinny..... I obviously have chosen to have photoshop control the color management. The closest I have come is to use the printing profile: Japan Color 2002 Newspaper without black point compensation (I think I used Relative Compensation). The only way I can get the yellow to show on the brown is to actually PRINT a brown paper background ON TOP of the brown colored paper. Obviously, this is causing the brown paper to look quite dark. The yellow is perfect and I've now lost every other color (Navy & 3 shades of Gray). They're all dull against the multi-layered brown. I have tried manipulating the yellow to be more green or more orange and sure enough, they turn out looking green or orange. Should I switch to CMYK instead of RGB? If orange is a variation of brown, why does orange show up on brown so much easier than yellow?
Is there a way to manipulate the newspaper profiles to adjust for browner paper rather than grayer paper?
I am sooo close but I literally cannot figure this out!! Please tell me there's a color profile combination I'm not aware of..... and please don't tell me that printing yellow on brown is impossible After all, we're photoshop users. It's possible; just have to figure out how.
Sincerely, One Desperate DesignerYou may ask your printer whether he can use opaque yellow ink:
https://www.google.de/search?hl=de&as_q=&as_epq=opaque+yellow+ink&as_oq=&as_eq=&as_nlo=&as _nhi=&lr=&cr=&as_qdr=all&as_sitesearch=&as_occt=any&safe=images&as_filetype=&as_rights=
Standard offset ink is transparent. The reflected light is always darker than the substrate.
Best regards --Gernot Hoffmann -
Please help! Printing in Lightroom 2.6...can't do it :(
I just bought an Epson Artison 810 and it worked great the first night. Now when I print anything in LR2.6 all I get is a solid gray. It will print my Identity plate and it shows the picture fine in the print window. I can print in PS 4 and all other programs without problems. I am sure I did something stupid in LR but, don't know what it is. Please help a frustrated old man if you can.
Thanks
Alan NorthThis is strange! Installed LR3 Beta and it works great. I hope I don't have to use the beta exclusivly just so I can print!
-
Could anyone please help about print check??
Dear expert,
We are testing the print process in OEM sample company but it did not print out and show that "The print document could not be started?" I have no clue how to solve this problem. The printer can print anything except this check, we are new to SAP and will go live very soon. Please help if you could. Thanks a lot.Mickey usually the standard for processing a check in not to use the check for payment area, thats more for manual checks or viewing a check already posted.
My suggestion is to go to the outgoing payments area and select what you are going to pay using this area, post this..
then go to the document printing under Banking, change the document type to checks for payment
select the checks you want to print and enter your starting ck number...
send this to the printer of choice, wait until all checks print and then confirm
Hope this helps
ps also make sure you have the default layout for the check listed in Admin, set up, banks, house banks...scroll to the right and see the defaults to set up.
Edited by: Joanne Pencola on Sep 28, 2011 1:53 PM -
Please help Verticle line problem
Please help I have worked on this for hours below is my code. I need to create a face and I have a problem getting my g.drawline in the right place. I need it in the middle between the two eyes and not matter what I do it won't work. Could you help, please.
import java.awt.*;
import javax.swing.*;
public class Face extends JFrame {
public Face(){
super( "Face" );
setSize( 300, 170 );
setVisible ( true );
public void paint ( Graphics g ){
super.paint( g );
g.setColor( Color.yellow );
g.drawArc( 100, 45, 80, 80, 0, 360);
g.setColor( Color.blue );
g.drawArc( 120, 70, 10, 10, 0, 360);
g.setColor( Color.blue );
g.drawArc( 150, 70, 10, 10, 0, 360);
g.setColor( Color.magenta );
(this is the nose) g.drawLine ( 90, 147, 90, 180 ); THIS IS THE LINE I HAVE A PROBLEM
g.setColor( Color.red );
g.drawArc ( 110, 55, 60, 60, 0, -180 );
public static void main(String args[])
SmileyFace application = new SmileyFace();
application.setDefaultCloseOperation(
JFrame.EXIT_ON_CLOSE );
I have changed the int to every possible number and it just won't work for me what am I doing wrongtry:
g.drawLine ( 140, 85, 140, 110 );
When you drew your head you specified g.drawArc( 100, 45, 80, 80, 0, 360);
What you are really saying is:
a) position the circle inside an imaginary rectangle with the top left corner at (100, 45) and make the width of the rectangle 80 and the height 80.
b) the center of this rectangle is
x = 100 + 80/2 = 140
y = 45 + 80/2 = 85
c) therefore draw a circle using (140, 85) as the center point (which is where I started your nose)
Add the following line to your program and you will see how the head fits into the rectangle:
g.drawRect(100, 45, 80, 80);
Hope my explanation helps. -
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/ -
PLEASE HELP.. PROBLEM WITH RESTORE
okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
PLEASE HELP ME!! I DONT know what to do.
ipod 5th gen 30gb Windows XP____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: ****.
The iPod Service Logging Information:
[SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
[SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
[SERVICE: 0xB54,22:06:22 INFO] Listener Window created
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device is an iPod
[SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
[SERVICE: 0xB44,22:07:34 INFO] [1] input #0
[SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
[SERVICE: 0xB48,22:07:38 INFO] [1] input #1
[SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
[SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
[SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
[SERVICE: 0xB44,22:07:51 INFO] [1] input #3
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
[SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
[SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
[SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
[SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
[SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
[SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
[SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xB44,22:08:01 INFO] [1] input #4
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
[SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
[SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
[SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
[SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
[SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
[SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
[SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
[SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD04,22:09:01 INFO] Mounted
[SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
[SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
[SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
[SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
[SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
[SERVICE: 0xB48,22:11:15 INFO] [1] input #5
[SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
[SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
[SERVICE: 0xB44,22:12:22 INFO] [1] input #7
[SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
[SERVICE: 0xB48,22:18:13 INFO] [1] input #8
[SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
[SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
[SERVICE: 0xB44,22:21:48 INFO] [1] input #10
[SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
[SERVICE: 0xB48,22:44:23 INFO] [1] input #11
[SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
[SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
[SERVICE: 0xB44,22:52:47 INFO] [1] input #13
[SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
Windows XP
well i clicked help.. and that didnt do anything either.. ;/
Maybe you are looking for
-
I have updated my iPad, my wife's iPad, but both our iPhones (5S) and (5C), give the following error every time we try. "Unable to verify update. iOs 8.0.1 failed verification because you are no longer connected to the internet." We are obviously con
-
I moved my ITunes to an external drive. Whe I was prompted to run the update for a new version of Itunes, It downloaded but would not install. now when opening Itunes I get an error message indicating the file msvcr80.dll is missing. How can I res
-
IMac and Mouse A1152 - rapid clicking noise? Grounding issue?
June 2008 After browsing though all the posts on this board I cannot find an answer to the following question: I have a new iMac and every day, after several hours of use the mouse makes a rapid clicking noise when I barely touch it. After trying it
-
Error return from xmlparserBuffer
Hi, I am in the process of converting the program from using IBM's XML C++ parser to Oracle's C++ parser. I am usnig the xmlparseBuffer to parse an in-memory message (with embedded DTD). The following error was returned: <1,1> LPX-00218: invalid char
-
Invoice date greyed out in FB60
Hello Experts, When we enter header data in FB60 & press enter both the invoice date & posting date are greyed out. Is there a possibility that the invoice date is not greayed out. Thanks & Regards, Shekhar