Please Help! Comment List Won't go away...

I have Adobe Acrobat 8.0 PRO and I added a comment to a certain part of the forms I made because when a client goes to a certain part of the document I want them to see I comment I made about a certain part of our document. The problem is every time the program starts the "Comments list" pops up. I can close it manually each time but I don't know why it remains open every time I open the file. I don't know what to do anymore. I have spent too much time trying to figure it out...if anyone can help I would appreciate it! Thanks again in advance :)

Do a save as after hiding the comment list. Please continue this thread
if needed in the Acrobat forum, not the Reader forum. The Reader app
cannot re-save changes in pdfs.
Mike

Similar Messages

*** PLEASE HELP *** My IPHONE won't sync with Itunes *** PLEASE HELP ***

My husband & I both have Iphones & we went to sync & his goes fine, but everytime I plug mine in, the rainbow beachball comes up & just turns & turns & won't go away, and never connects to itunes & when I unplug my phone it goes away... We have 2 separate accounts setup to do our syncing...
Also my phone does not let me dial out or people dial in... They go right to voice mail. I have tried rebooting & even the "hard reboot"
And one more thing... Is there any other way for me to save my contacts & calender??
If I have to restore, how do I do that??
Please help me.... Thank you!!

You are a LIFESAVER!!!!! It worked & my phone is syncing.... No one at the "apple" help desk has been able to help me all week. THANK YOU so much...
Can the phone not handle that many podcasts at once? I have a 16GB phone...

Please help- Audio Cd won't mount after Update to 10.3.9

My CD/DVD drive is MATSHITA CD-RW CW-8122. Data CDs and DVDs are mounting fine. However when I put in an audio cd it clicks a few times and soonafter ejects. Everything was fine as far as I can remember before my update to 10.3.9 (from 10.3.5, I think). I've done the list of suggestions in some of the posts (deleting preferences and cache files, permissions, pram zap) but there's no change. Please help!

broom-z...
"And here's what's REALLY wacky- audio CDs created on a computer (non-store bought) mount fine AND launch itunes just like normal. And the CD track names are retrieved and all that. It's only with the manufactured Audio CDs that I get this click-click - small purr- click- eject. This is any manufactured Audio CD, old or brand new."
Hummmm--- I wonder if you are purchasing any of those copy protected audio CDs? It is the only thing I can think of that can cause that.
...Ron
PS... On the other hand all this happened after an update??? Puzzling!
Message was edited by: Ron JACKLE 2x

Please help iPhone 4S won't turn on!

Okay so this all happened months ago when ios7 came out. I tried to update my iPhone 4S software straight off of my phone in the settings to ios7 and it wouldn't work. So than I hooked my iphone up to my computer and went on iTunes and tried to update from there manually. Everything was working it said like 95% done updating but than it said this operation can't be done. Now, my iphone won't turn on, it goes to the connect to iTunes screen, but i don't know what to do I tried to connect it to iTunes and it didn't turn on. Please help I need this iphone to turn on!

Assuming your phone was never jailbroken, try the following:
Install the latest version of iTunes on your computer if it isn't there already from apple.com/itunes
Reboot your computer
Connect the phone to a USB 2 port directly on your computer, not to a USB hub. If it is a desktop or tower computer use a port on the back, not on the front
Disable your antivirus and firewall
Launch iTunes
Connect the USB cable to the computer, but not to the phone
On the phone hold the HOME and SLEEP buttons for EXACTLY 10 seconds, then release the SLEEP button but continue holding the HOME button - if an Apple logo appeared you held too long; the screen should be black when you release the SLEEP button.
While still holding the HOME button connect the end of the USB cable to the phone
Wait until iTunes acknowledges the phone, then release the HOME button.
The phone should now restore. If it doesn't note the error number and post back.

PLEASE HELP! LIVE won't work in LOGIC anymore

Hi,
This is my problem:
I happily worked on my MacBook Pro (2.33 GHz Tiger 10.4.11) for a long time, using Ableton LIVE as a ReWire slave to LOGIC and everything worked just fine.
I recently got myself a Mac Pro (2 x 3.2 GHz Quad-core 4 GB RAM) and on which Logic seems to be running fine by itself (as does LIVE), but as soon as I open any of my documents created on my laptop (files that were created in ReWire mode) there seems to be a latency issue, as in some of the tracks don't quite play on time and then when I quit LIVE it crashes and LOGIC crashes a couple of seconds after that too.
This happens also when I open an empty LOGIC file and start LIVE - again empty. A weird thing I noticed is that LIVE doesn't seem to crash when I quit, if I haven't pressed play. Only after playing something either in LOGIC or in LIVE do I get the crashes.
If anyone has got any suggestions for this I'd be SOO grateful - I've been searching the internet and forums all day and can't seem to find any answers for this weird problem ... Could it be something to do with Leopard?
PLEASE HELP!

Also, Connection Doctor says I'm connected to the
internet just fine.
The Connection Doctor in Mail should list your email accounts and whether it can access them.
Sounds like Mail has gotten confused about your .mac password. In Mail, go up to the menu bar Mail, go down to Preferences, select your .mac account and re-enter your password under "Incoming Mail Server".
You may also have to re-enter your password under "Outgoing Mail Server" also.

Please help, my "Numbers" won't open and when I looked up in my console, I see this message :13-03-04 1:18:19 PM Numbers[601] Incompatible applications: app=com.apple.iWork.Numbers, targetApp=com.apple.Safari

I tried to open my "Numbers" application today and it won't open saying it has "closed unexpectedly". When I looked up the messages in the console, this was there. Please help!

If you purchsed from the App store then delete the application and reinstall

Please Help, Several Applications Won't Open!

I'm not sure if this is the right thread for this. Please point me in the right direction if it isn't. I just did a software update. The current "internet security update" was, I believe, one of installs (I wish I paid more attention). Now, I have several internet related applications that won't work. Safari, my browser of choice, won't open (I'm doing this on Firefox). My email app, Eudora, won't open. Quicktime won't open. I just tried reinstalling both Safari and Eudora. Both still won't open. I haven't done anything with Quicktime yet. Just checked other applications (RealPlayer, Windows Media Player). Neither will open. Is there a conflict somewhere? How can I resolve this? Please help!
Thank you.
FYI: I have a Titanium G4 550MHz PowerBook running OS 10.4.10.

As others have noted, get a bootable, external HD, and make a bootable backup/clone before updating. That allows you to revert to the previous good state without having to reinstall everything.
These should get you pointed in the right direction:
http://docs.info.apple.com/article.html?artnum=106941
http://www.macmaps.com/upgradefaq.html
http://www.macmaps.com/backup.html
http://www.thexlab.com/faqs/installswupdates.html
http://www.thexlab.com/faqs/backuprecovery.html

Please help, LUMIA 920 won't update.

Hello
First let me say that I've had my NL0920 for six months and love it, but I am really frustrated that even 5 months after Amber came out my phone won't update and even fails updating when I try using other methods that have been discussed here. Please help, this is really frustrating because I don't have any of the Amber goodness and at this rate I know I will also miss the Black update. Even though I love my 920 I fully expected it would be updated fairly constantly as that was one of the main things that were easy to see from the press about Nokia.
I have a Nokia Lumia 920 type RM-821, white (RM-821_lta_lta1_546)
product code 059S1L6,
configuration ID 153556,
Label ID 1232.5957.9200.10211.142,
Application Version 3.3.32
Mobile Operator 000-PR
Accesories Agent 2.6.2.1
Feedback to Nokia 2.5.0.17
Firmware Update Notifier 1.0.1.7
Nokia Share 2.1.2.3
Silent Installer 1.4.1.2
SIM Unlock 1.0.0.5
Software Version 1232.5957.1308.0002
The phone is an unlocked Puerto Rican Country variant and is being used in Panama Central America with the Claro Operator. According to the Global Availability page (http://www.nokia.com/global/support/software-update/wp8-software-update/) the Country variant should already have the amber update available.
When I try checking for phone updates through the Settings menu, it tells me that my phone is up to date, which is obviously not true.
Please help. I love this phone but if it won't upgrade then I am going to have to start looking at something else, because I really hoped I would get the new camera improvements, and the same with the black update.
Moderator's note: We removed the attachment and the phone's IMEI in the message. We also removed some parts of the post that mentions the use of an unauthorized software. Posting this information on the forum is not allowed.

Have just got this convincing answer from Nokia supprt (Australia <3 )
Hi Ridha,
Thank you for contacting the Nokia Careline.
We understand that you would like to know information about the software update availability of your Nokia Lumia 920.
Rollout timings and feature availability vary by phone model. We expect the roll out of the update will be completed by the end of September 2014.
We ask you to be patient, as updates for Nokia Lumia range are always released gradually.
To check the availability of the software update for your Nokia Lumia 920, Please click use the link below:
http://www.nokia.com/global/support/software-update/wp8-software-update/availability-in-latin-americ...
Please feel free to write back to us if you need further assistance with this case. You may also contact one of our friendly Technical Support Executives at 1-300 366 733 from 9am to 5pm, AET, Monday to Friday, closed on national public holidays. For online assistance, please visit ‘Contact us’ at our website http://www.nokia.com/au-en/support/contact/contactus/
Regards,
Francis L.
Nokia Care Representative

Please help! Computer won't recognize ipod when plugged in!

Everytime I plug my ipod into my computer it won't show up under the devices section or the itunes and it also won't even say it's connected on the ipod itsself. PLEASE HELP!

even though no one replied, I figured it out myself.

Please HELP! Why won't Leopard install on my eMac?

When I put the Leopard DVD in my eMac it does not recognize it at all. I don't hear the drive running, and nothing pops up on the desktop. Altho it is an older machine, it meets all of the system requirements: 1GHz, 640MB, PowerPC G4, with plenty of hard drive space! I've tried to reboot and install, I've tried reboot and hold the C key to install... nothing works! I even put in another DVD just to make sure that the optical drive is still working properly... it played just fine.
I've read everything that I can about installing but haven't found anything that addresses this. I did see one article that said that Leopard cannot be installed on UFS(?)-formatted volumes. Can anyone tell me how I would find out whether I'm affected by that or not? Also, when I tried it in my iBook G4, it popped right up... what's the deal?!
PLEASE HELP! I'M SOOOO FRUSTRATED!! Thanx in advance!

debkndy wrote:
Hi There...
So, I currently have a CD read/write and DVD player combo drive... should that be able to read the Leopard Install DVD? I don't understand why my iBook G4, 1GHz with 256MB will read it, but my eMac G$, 1GHz, 640MB won't!
I would suspect that your optical drive is not functioning properly. While the drive is most likely capable of reading DL DVDs, it may not be working right. See if you can skip through a full DL DVD movie on the drive with zero errors. Be sure to include both layers meaning go past the 2-hour point.
The target mode is another solution, but even if you install it, you won't be able to fix it or do anything that requires the DVD unless you fix that first.
I will try to install it using the "target mode" with a firewire and see if it works, unless anyone has any other suggestions for me... thanx.

Please please help. Computer won't log in.

Guys, I really need help. I shut my computer down a few days ago, and when I turned it on, it won't accept my password in thee login window. I then tried resetting the password from the master Install CD, but it won't allow me. When it asks me which drive I would like to reset the password from, if I select the CD, then the password boxes will allow me to write in them. However, if I select the hard drive, the spinning cartwheel comes up, spins for 10 seconds then the screen dissappears and goes back to the main menu of the install CD. Please help, why can't I log in?

Do you get any sound or any video at all?

Please Help with Lists

I am having horrible difficulties trying to figure out how to work with 2 lists. I need to be able to select one, click a button, and it moves to the other. And vice versa. I can't figure out how to get the selected index, how to add, or how to remove. I also don't know if I need something like a listener, if I need any models... Could someone please please help. As I said, this action takes place within a btnActionPerformed method.
Thanks!

Vector data1 = new Vector();
data1 .add("one1");
data1 .add("two1");
data1 .add("three1");
data1 .add("four1");
Vector data2 = new Vector();
data2 .add("one2");
data2 .add("two2");
data2 .add("three2");
data2 .add("four2");
final JList list1 = new JList(data1);
final JList list2 = new JList(data2);
JButton from1To2Button = new JButton("1 -> 2");
JButton from2To1Button = new JButton("2 -> 1");
from1To2Button.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
        Object o = list1.getSelectedValue();
        if (o != null) {
             ((DefaultListModel)list1.getModel())removeElement(o);
             ((DefaultListModel)list2.getModel())addElement(o);
from2To1Button.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
        Object o = list2.getSelectedValue();
        if (o != null) {
             ((DefaultListModel)list2.getModel())removeElement(o);
             ((DefaultListModel)list1.getModel())addElement(o);
....Denis

OMG PLEASE HELP ME! WON'T START UP AND SCREEN LOOKS FUNNY O.O

Okies, my sister was on my macbook pro all night, and i just finished updating some program (the mac version of winzip?) and the comp froze and had little rectangles all over it, like tiny TVs with bad reception on it O.o
So i hold down the Power button to reset it, then turn it on, the little rectangles are there when the grey screen with the apple on it, then it goes to a blue screen and stops
I can't do anything! I even have my install disk in it cos i thought i might need to restart it that way and now it won't come out T_T
Please help! I don't know what ive done, i've only had it...less than a week!

Couple of things I'd do here:
1. Restart your computer.
2. While the computer restarts, press the trackpad button and hold it down through the boot process. During the normal bootup process, this should tell the computer to eject the CD.
After that, follow these steps:
1. Turn off your computer again.
2. Unplug all cables including the power cable
3. Take out the laptop's battery.
4. Press the power button and hold it down for 5 seconds.
5. Put back in the battery.
6. Plug in the power cord
7. Press the power button to start the computer
8. As soon as you here the "bong" noise (the startup noise) press and hold down the following keys: Command Option P R (that's four keys all together including the letters P and R)
9. In a few seconds, the computer will go "bong" again (i.e., present the startup sound). Once that happens, let go of the keys and let the computer finish booting.
Did this work to solve your screen problems?

Please Help! Windows won't install IPod Driver!

My brother got a 2GB IPod nano and itunes and everything installs but when i plug in the IPod i get the install driver window. I click to intsall driver but it keeps saying it couldnt find anything to install (even when i have the disc the ipod came with inside). Its a Toshiba labtop. If anyone knows why the driver won't install or had the same problem please help! Thanks

Hi brunos mum, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.

Please help on List Item... I'm stucked... :(

Hi,
I created my Data Block (my data block is called Supply inside
have DeptId, VendorId and Date_Last_Meet) and Layout
(Windows/Canvases) using the Wizard, than I chg one of the
control item frm Text Item to List Item (Property Palette ->
Item Type). And I added the following code (below) into the WHEN-
NEW-FORM-INSTANCE trigger to populate the list:
DECLARE
group_id RecordGroup;
list_id ITEM;
BEGIN
group_id := Create_Group_From_Query ('my_group',
'SELECT DeptName FROM Department');
list_id := Find_Item('DeptId');
IF (Populate_Group(group_id) = 0) THEN
Populate_List(list_id, group_id);
END IF;
END;
When I run my form it give me this error (a popup error):
FRM-30351: No list elements defined for list item.
List DEPTID
Created form file C:\MP3\75131\TEST_LIST_ITEM.fmx
and this error (displayed in form status bar):
FRM-41334: Invalid record group for list population.
What wrong with the code? I tried every single code in this
forum, but none of them work for me... could someone please help
me out, I'm stucked... :(
Note: I'm using Oracle8i and Form Builder [32 Bit] Version
6.0.8.11.3 (Production).
Thank You.
Regard,
Wai Chong

Hello,
For populating list from Query you need to return 2 columns
from query, one will be display column and Second will be it's
corresponding value. Problem is in your query.Look at following
procedure. Value column must be converted to Character,that's
why I am using To_char here.
PROCEDURE POPULATE_ZONE IS
     V_ZONEITEM               ITEM;
     V_ZONEGROUP               RECORDGROUP;
     N
     NUMBER;
BEGIN
          V_ZONEITEM     := FIND_ITEM('TSTATEM.ZONE');
          IF ID_NULL(V_ZONEITEM) THEN
                    MESSAGE('Item zone does not
exists.');
                    MESSAGE('.');
          ELSE
                    V_ZONEGROUP :=
CREATE_GROUP_FROM_QUERY('ZONEGRP','SELECT NAME,TO_CHAR(ZONE0)
ZONE
     FROM YOGI.TZONEM ORDER BY ZONE0');
               N := POPULATE_GROUP('ZONEGRP');
               IF N <> 0 THEN
                         MESSAGE('Group zone does
not contain entries.');
                         MESSAGE('.');
                         RAISE
FORM_TRIGGER_FAILURE;
               ELSE
                         POPULATE_LIST
('TSTATEM.ZONE','ZONEGRP');
               END IF;
     END IF;
END;
Adinath Kamode

*Please Help!* Comment List Won't go away...

Similar Messages

Maybe you are looking for

Please Help! Comment List Won't go away...