Please help ... config doubt
I am using PA 30 to enter additional data of the employee.
While entering his salary data, I am unable to save it and am getting the following error ...
No entry in table T510 for the key 400101 M4 on 01.06.2006
Message no. RP100
Diagnosis
The system has attempted to read a value from table T510 on 01.06.2006 for the key 400101 M4, but could not find it.
Procedure
This may be due to an error in the system settings. Please check your entries, and call your system administrator if necessary.
where M4 is the pay group.
What is the config change that needs to be dome to solve this problem ?
Please advise.
Regards,
Schneider
Hi Schneider,
1. Check the dates in table T510 (use TCode sm30) make sure the "From" date lies within the T510 date range.
2. "No entry in Table T510 for the key..... "' check the specified key actually exists in tableT510.
3. Check if you have assigned EG and Employee Subgroup and your payscale are in correct country grouping.
Regards
Ghouse
Similar Messages
-
What happened to security.warn settings in about:config. They are missing in FF25. Please help!!
Hi,
I'm upgrading from Firefox 15 to Firefox 25.
I used to be able to set the following security warnings in about:config.
security.warn_entering_secure
security.warn_entering_weak
security.warn_leaving_secure
security.warn_submit_insecure
security.warn_viewing_mixed
Not anymore. Looks like these are missing from Firefox 25.
Please help!! Urgent.
Thank you.
Sr.the warnings about entering/leaving a secure site are totally gone, you'd have to look out for the security indicator at the start of the address bar to get that information about a site: https://blog.mozilla.org/ux/2012/06/site-identity-ui-updates/
<br>or use an extension like this one for better visibility: https://addons.mozilla.org/firefox/addon/safe/
the warning dialog about submitting data over an insecure channel at a secure site should still be in place... -
Need to update my IPhone 4 and connected to the itunes on windows XP. I clicked on update and waited. A message appears that says," Cannot update etc. Please check your network settings/config., etc... or try again later" and it's been happening for a while. Please help.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Hi All, doubts in XI..please help
HI Gurus,
I have some small doubts here...iam a beginner...please help me....
1)
What 2 Data Types are automatically created when the Namespace is saved in the Integration Repository?
2) purpose of the setting to "Permit Importing of SAP IDOCs or BAPI/ RFCs". Where is this configured?
3) wat is end-to-end monitoring? How is it configured? What are the different views
4) What happens after an exception is raised in BPM?
5) What are the different monitoring statuses? Where do you find them?
Thank you very much in advance....
Best Regards,
AbhinavHi!
>>1) What 2 Data Types are automatically created when the Namespace is saved in the Integration Repository?
create a new namespace and you'll see
-hint: they are used for error processing
>>2) purpose of the setting to "Permit Importing of SAP IDOCs or BAPI/ RFCs". Where is this configured?
It's configured for each sw component version (IR, dbl click SWCV)- if you have non-sap system, u usually do not permit it (what for to import idocs and relate them to non-SAP component?) and vice-versa
>>3) wat is end-to-end monitoring? How is it configured? What are the different views
you can see report of message processing status from one source to target
>>4) What happens after an exception is raised in BPM?
depends, if you handle it with BLOCK exception branch the BPM continues processing.. otherwise error is reported and processing is stopped
>>5) What are the different monitoring statuses? Where do you find them?
??? There are several monitoring screens on XI.. Which one do you mean?
for example for sxmb moni - IE monitor, click the Legend button - on the right. you'll see all the statuses possible
then you have AE monitoring.. there are several statuses - delivered, not delivered, to be delivered, failed, .... I think it's clear what they mean..
Peter -
PLEASE HELP!!! I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone. For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS. WHY? I have spent almost 2 full days simply trying to get the cellular data network settings to appear and I am now at the point of pulling hair and/or smashing things. Why is it so difficult to simply update the cellular data network APN settings on a standard Iphone 3 ATT with a unlimited Straight Talk plan? Everyone knows that Straight Talk's $45 a month unlimited data/calling plan is supposed to be 100% compatible with AT&T carried Iphones. Will someone please tell me HOW TO UPDATE THE APN SETTINGS ON THIS IPHONE 3. Thanks and God bless
<Personal Information Edited by Host>StraightTalk is not a supported carrier.
Contact them for support.
FYI, unless the device is officially unlocked from AT&T, you will not be able to use it on another carrier. -
I accidently changed something in about:config. Please Help
I was trying to change what website opens in a new tab and I must have change the wrong thing. I now cant access my URL bar. When I type something in the search bar all it does nothing. Cant access any of the buttons either at the bottom.
Please help...You're welcome.
You should always be cautious if you change a pref and make sure that you understand what you are doing.
If you want to change the page that opens in as new tab to the home page about:home then you would have to set the browser.newtab.url pref to about:home.
*<b>about:config</b>: browser.newtab.url = about:home
I don't know what went wrong that you ended up with a window that only has the title bar.
See this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites -
System config problems please help!!!!
I bought a windowns recovery disk for my toshiba satellite L450D and everything was okay until I reached theconfiguring system partI left it go for about 2 hours but nothing happened so I restarted and I still have the same problem can someone please help me with this because I don't wanna buy a new computer
If the recovery disks are not working then it is either an issue with the disks or a hardware issue with the computer. I would start with the disks. Contact Toshiba (where you bought the disks) and tell them the disks are not working. If possible, try and see if they will issue you the recovery media on flash drive as that seems to work better than the cds. Another thing you can try is (if possible) swapping parts of your computer into a know working computer to ensure they are all in working order (hdd, ram). It is also not a bad idea to wipe a hdd before attempting to do an install. this can be accomplished using third party software which can usually be accessed via bootable cd.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit -
Doubt in f:facet tag.. Please help me ..
Hi Friends,
I couldnt resolve the following problem..
In my screen I have 8 columns.. I have to provide sorting facility for some of the column, which is going to be set dynamically..
I have written my code like this:
<h:column rendered="#{RecordListController.recordListBean.flag1}"> <f:facet name="header"> <h:commandLink rendered="#{RecordListController.recordListBean.sortFlag1}" actionListener="#{RecordListController.processAction}" id="cmdSort1">
<h:outputText value="#{RecordListController.recordListBean.headerDesc1}"/> </h:commandLink> <h:outputText rendered="#{!RecordListController.recordListBean.sortFlag1}" value="#{RecordListController.recordListBean.headerDesc1}"/>/f:facet> <h:commandLink action="viewRecordDetail" actionListener="#{RecordDetailController.processAction}" styleClass="selectlink" id="cmdSelectRecord"> <h:outputText value="#{recordListBean.recordValue1}" /> <f:param name="recordKeyValue" value="#{recordListBean.keyFieldValue}" /> <f:param name="currentRecord" value="#{recordListBean.currentRecordNo}" /> </h:commandLink> </h:column> No value is getting displayed as a column header..
Please help me..
Message was edited by:
w4cHi all
i tried to use a selectBooleanCheckBox within f:facet tag with a valueChangeListener. The call to valueChangeListner is not getting fired when clicking the checkBox.
when i put the same code outside the f:facet tag it works well.
code snippet:
<f:facet name="header">
<h:selectBooleanCheckbox id="checkAll1" value="#{listBean.allSelected}"
binding="#{listBean.selectAll}" immediate="true" onklick="submit();"
valueChangeListener="#{listBean.checkBoxClicked}"/>
</f:facet>Have anyone encountered the same problem.
Thanks for your valuable suggestions.
Regards
Balaji N
SCJP -
Please help to understand the Service parts planning doubts/clarifications
Please help to understand the Service parts planning,we r tring to do poc for project
1)How the sales history flow from cube to Interactive forecasting screen(in spp,like dp in apo there is no Planning area to store data and no load planning area from cube,so please let me know how it will sales history load data?)
2)Does Sales History of the child location will agregated to entry level ? if so like that we need to run statistical forecats at entry location?
3)where we will create the from and To Product(eg:Maping Product A to Product B ) to do the Relignment /Phase in profile/Interchangebility
4)What is the leading indicator forecasting and the purpose?
5)Where data will store in SPP (forecasting and other data like liveache in dp)? Mpos and Planning area is not there in SPP?
6)Can you please forward the process document to understand the flow as i am not able understand completely by the help document
Thanks for advance help
Regards
KKKHi,
Please check Service Parts Planning - Enterprise Services in SAP Advanced Planning and Optimization - SAP Library
BR -
Cisco SIP Phone 9971 won't register on CME 8.6 or 8.5 Please HELP
Please help me , I have problem with registering Cisco SIP phone 9971 with CME 8.6 on ISR 2901.
I configured CME for SIP clients, then I add configuration for 9971 phone and create profiles. Phone downloaded SEP...xml file from CME,after that phone look for g4-tones.xml and gd-sip.jar files, I added them to CME after that phone downloaded them and reboot. Now phone is stuck in some kind of loop and does not register on CME.
On phone log I can see repeting next few messeges.
12:01:58a No DNS Server IP
12:01:59a Updating Trust list
12:01:59a No Trust List instaled
12:01:59a SEP04C5AB03B0D.cnf.xml (TFTP) // at this time phone download SEP...xml file from CME
12:02:00a VPN Error: VPN is not Configured
on CME if issue DEBUG TFTP EVENTS i receive next few lines
*Aug 18 18:20:19.891: TFTP: Looking for CTLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:19.987: TFTP: Looking for ITLSEP04C5A4B03B0D.tlv
*Aug 18 18:20:20.083: TFTP: Looking for ITLFile.tlv
*Aug 18 18:20:20.347: TFTP: Looking for SEP04C5A4B03B0D.cnf.xml
*Aug 18 18:20:20.351: TFTP: Opened flash:/SEP04C5A4B03B0D.cnf.xml, fd 14, size 4585 for process 141
*Aug 18 18:20:20.363: TFTP: Finished flash:/SEP04C5A4B03B0D.cnf.xml, time 00:00:00 for process 141
here you can see verison info of CME
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 24-Mar-11 15:31 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
ELTOSAN_ROUTER uptime is 1 hour, 50 minutes
System returned to ROM by reload at 16:29:20 UTC Thu Aug 18 2011
System image file is "flash:/c2900-universalk9-mz.SPA.151-4.M.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO2901/K9 (revision 1.0) with 471040K/53248K bytes of memory.
Processor board ID FGL1508252Y
3 Gigabit Ethernet interfaces
2 terminal lines
1 Virtual Private Network (VPN) Module
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Internal Services Module (ISM) with Services Ready Engine (SRE)
Survivable Remote Site Voicemail (SRSV) on Cisco Unity Express (CUE) 8.5.1 in slot/sub-slot 0/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO2901/K9 xxxxxxxxxxxxx
Technology Package License Information for Module:'c2900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
this is RUNNING CONFIGURATION
! Last configuration change at 16:10:12 UTC Thu Aug 18 2011
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ELTOSAN_ROUTER
boot-start-marker
boot system flash:/c2900-universalk9-mz.SPA.151-4.M.bin
boot-end-marker
no aaa new-model
no ipv6 cef
ip source-route
no ip routing
no ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.5.1 192.168.5.10
ip dhcp excluded-address 192.168.5.200 192.168.5.255
ip dhcp pool phone
network 192.168.5.0 255.255.255.0
default-router 192.168.5.251
option 150 ip 192.168.5.251
ip dhcp pool data
relay source 192.168.2.0 255.255.255.0
relay destination 192.168.2.201
multilink bundle-name authenticated
crypto pki token default removal timeout 0
voice-card 0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711alaw
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 192.168.5.251 port 5060
max-dn 6
max-pool 6
load 9971 sip9971.9-1-1SR1.loads
authenticate register
tftp-path flash:
create profile sync 0005135312289902
voice register dn 1
number 207
allow watch
name GossaVM
label 207
voice register dn 3
number 101
name Dejan
label 101
mwi
voice register pool 1
id mac 000C.29C5.0011
number 1 dn 1
dtmf-relay sip-notify
username testvm password testera
codec g711alaw
voice register pool 3
id mac 04C5.A4B0.3B0D
type 9971
number 3 dn 3
presence call-list
dtmf-relay rtp-nte
username dejan password 1234
codec g711alaw
no vad
license udi pid CISCO2901/K9 sn xxxxxxxxxxxx
hw-module ism 0
hw-module pvdm 0/0
redundancy
interface GigabitEthernet0/0
description INTERFACE INTERNAL
no ip address
no ip route-cache
duplex auto
speed auto
no mop enabled
interface GigabitEthernet0/0.2
description LAN DATA
encapsulation dot1Q 2
ip address 192.168.2.251 255.255.255.0
no ip route-cache
interface GigabitEthernet0/0.5
description LAN VOICE
encapsulation dot1Q 5
ip address 192.168.5.251 255.255.255.0
no ip route-cache
interface ISM0/0
no ip address
no ip route-cache
shutdown
!Application: SRSV-CUE Running on ISM
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
interface ISM0/1
description Internal switch interface connected to Internal Service Module
shutdown
interface Vlan1
no ip address
no ip route-cache
shutdown
ip forward-protocol nd
no ip http server
no ip http secure-server
snmp-server community public RO
tftp-server flash:dkern9971.100609R2-9-1-1SR1.sebn alias dkern9971.100609R2-9-1-1SR1.sebn
tftp-server flash:kern9971.9-1-1SR1.sebn alias kern9971.9-1-1SR1.sebn
tftp-server flash:rootfs9971.9-1-1SR1.sebn alias rootfs9971.9-1-1SR1.sebn
tftp-server flash:sboot9971.031610R1-9-1-1SR1.sebn alias sboot9971.031610R1-9-1-1SR1.sebn
tftp-server flash:skern9971.022809R2-9-1-1SR1.sebn alias skern9971.022809R2-9-1-1SR1.sebn
tftp-server flash:sip9971.9-1-1SR1.loads alias sip9971.9-1-1SR1.loads
tftp-server flash:United_States/g4-tones.xml
tftp-server flash:English_United_States/gd-sip.jar
control-plane
voice-port 0/0/0
voice-port 0/0/1
voice-port 0/0/2
voice-port 0/0/3
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
mgcp profile default
gatekeeper
shutdown
line con 0
line aux 0
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password jebiga
login
transport input all
end
I did not have any kind of problem with X-LITE to register to CME. also try with few SCCP phones 7940 and I did not any kind of problem .
this is content of SEP....xml file for 9971
<device>
<deviceProtocol>SIP</deviceProtocol>
<devicePool>
<dateTimeSetting>
<dateTemplate>M/D/YA</dateTemplate>
<timeZone>Pacific Standard/Daylight Time</timeZone>
<ntps>
<ntp priority="0">
<name>0.0.0.0</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
<callManagerGroup>
<members>
<member priority="0">
<callManager>
<ports>
<sipPort>5060</sipPort>
</ports>
<processNodeName>192.168.5.251</processNodeName>
</callManager>
</member>
</members>
</callManagerGroup>
</devicePool>
<sipProfile>
<sipProxies>
<registerWithProxy>true</registerWithProxy>
</sipProxies>
<sipCallFeatures>
<cnfJoinEnabled>true</cnfJoinEnabled>
<localCfwdEnable>true</localCfwdEnable>
<callForwardURI>service-uri-cfwdall</callForwardURI>
<callPickupURI>service-uri-pickup</callPickupURI>
<callPickupGroupURI>service-uri-gpickup</callPickupGroupURI>
<callHoldRingback>2</callHoldRingback>
<semiAttendedTransfer>true</semiAttendedTransfer>
<anonymousCallBlock>2</anonymousCallBlock>
<callerIdBlocking>2</callerIdBlocking>
<dndControl>2</dndControl>
<remoteCcEnable>true</remoteCcEnable>
</sipCallFeatures>
<sipStack>
<remotePartyID>true</remotePartyID>
</sipStack>
<sipLines>
<line button="1" lineIndex="1">
<featureID>9</featureID>
<featureLabel></featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name></name>
<displayName></displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
<line button="2" lineIndex="2">
<featureID>9</featureID>
<featureLabel>101</featureLabel>
<proxy>USECALLMANAGER</proxy>
<port>5060</port>
<name>101</name>
<displayName>Dejan Rakic</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>1</callWaiting>
<authName>dejan</authName>
<authPassword>1234</authPassword>
<sharedLine>false</sharedLine>
<messagesNumber></messagesNumber>
<ringSettingActive>5</ringSettingActive>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>true</callerNumber>
<redirectedNumber>true</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
</sipLines>
<enableVad>true</enableVad>
<preferredCodec>g711alaw</preferredCodec>
<dialTemplate></dialTemplate>
<kpml>1</kpml>
<phoneLabel></phoneLabel>
<stutterMsgWaiting>2</stutterMsgWaiting>
<disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
<dscpForAudio>184</dscpForAudio>
<dscpVideo>136</dscpVideo>
</sipProfile>
<commonProfile>
<phonePassword>1234</phonePassword>
<callLogBlfEnabled>2</callLogBlfEnabled>
</commonProfile>
<featurePolicyFile>featurePolicyDefault.xml</featurePolicyFile>
<loadInformation>sip9971.9-1-1SR1.loads</loadInformation>
<vendorConfig>
</vendorConfig>
<commonConfig>
<videoCapability>0</videoCapability>
<ciscoCamera>0</ciscoCamera>
</commonConfig>
<sshUserId>dejan</sshUserId>
<sshPassword>1234</sshPassword>
<userId></userId>
<phoneServices>
<provisioning>2</provisioning>
<phoneService type="1" category="0">
<name>Missed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/MissedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Received Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/ReceivedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="1" category="0">
<name>Placed Calls</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/PlacedCalls</url>
<vendor></vendor>
<version></version>
</phoneService>
<phoneService type="2" category="0">
<name>Voicemail</name>
<phoneLabel></phoneLabel>
<url>Application:Cisco/Voicemail</url>
<vendor></vendor>
<version></version>
</phoneService>
</phoneServices>
<versionStamp>0131511014412102</versionStamp>
<userLocale>
<name>English_United_States</name>
<langCode>en</langCode>
</userLocale>
<networkLocale>United_States</networkLocale>
<networkLocaleInfo>
<name>United_States</name>
</networkLocaleInfo>
<authenticationURL></authenticationURL>
<directoryURL></directoryURL>
<servicesURL>http://192.168.5.251:80/CMEserverForPhone/serviceurl</servicesURL>
<dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
<dscpForCm2Dvce>96</dscpForCm2Dvce>
<transportLayerProtocol>2</transportLayerProtocol>
</device>Hello,
I'm facing exactly the same problem, that is:
a Cisco SIP Phone 9971 won't register on CME 8.6 running on a 2811
I have read all the postings to this Forum, but I have not been able to solve it.
In my case the commands voice register dn and voice register pool are OK.
So frankly, I have no idea what I could be missing.
I'm pasting the Router's config.
I hope somebody is able to point me in the right direction.
Here is the config. Thank you!
C2811#sh run
Building configuration...
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname C2811
no aaa new-model
dot11 syslog
ip source-route
ip cef
ip dhcp excluded-address 172.25.140.1 172.25.140.10
ip dhcp excluded-address 172.35.140.1 172.35.140.10
ip dhcp pool Data
network 172.25.140.0 255.255.255.0
default-router 172.25.140.1
option 150 ip 172.25.140.1
dns-server 172.25.140.1
ip dhcp pool Voice
network 172.35.140.0 255.255.255.0
default-router 172.35.140.1
option 150 ip 172.35.140.1
dns-server 172.35.140.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
voice service voip
allow-connections sip to sip
sip
registrar server expires max 3600 min 120
voice register global
mode cme
source-address 172.25.140.1 port 5060
max-dn 40
max-pool 42
load 9971 sip9971.9-4-1-9.loads
authenticate register
authenticate realm cisco
tftp-path flash:
create profile sync 0004820400584603
voice register dn 1
number 1010
allow watch
name Phone10
label Phone10
mwi
voice register pool 1
id mac 189C.5DB6.BD09
type 9971
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username adm password adm
call-forward b2bua busy 68600
codec g711ulaw
no vad
camera
video
voice-card 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879153754
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879153754
revocation-check none
rsakeypair TP-self-signed-1879153754
crypto pki certificate chain TP-self-signed-1879153754
certificate self-signed 01
(details ommited)
license udi pid CISCO2811 sn FTX1146A44H
username admin privilege 15 password 0 admin
redundancy
interface FastEthernet0/0
no ip address
duplex auto
speed auto
interface FastEthernet0/0.25
description Data VLAN
encapsulation dot1Q 25
ip address 172.25.140.1 255.255.255.0
interface FastEthernet0/0.35
description Voice VLAN
encapsulation dot1Q 35
ip address 172.35.140.1 255.255.255.0
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
tftp-server flash:P00308010200.bin
tftp-server flash:P00308010200.sbn
tftp-server flash:P00308010200.sb2
tftp-server flash:P00308010200.loads
tftp-server flash:SCCP42.9-3-1SR3-1S.loads
tftp-server flash:apps42.9-3-1ES19.sbn
tftp-server flash:cnu42.9-3-1ES19.sbn
tftp-server flash:cvm42sccp.9-3-1ES19.sbn
tftp-server flash:dsp42.9-3-1ES19.sbn
tftp-server flash:jar42sccp.9-3-1ES19.sbn
tftp-server flash:term42.default.loads
tftp-server flash:term62.default.loads
tftp-server flash:SCCP45.9-3-1SR3-1S.loads
tftp-server flash:apps45.9-3-1ES19.sbn
tftp-server flash:cnu45.9-3-1ES19.sbn
tftp-server flash:cvm45sccp.9-3-1ES19.sbn
tftp-server flash:dsp45.9-3-1ES19.sbn
tftp-server flash:jar45sccp.9-3-1ES19.sbn
tftp-server flash:term45.default.loads
tftp-server flash:term65.default.loads
tftp-server flash:/Ringtones/Ringlist.xml alias Ringlist.xml
tftp-server flash:/Ringtones/DistinctiveRingList.xml alias DistinctiveRingList.x
ml
tftp-server flash:sip9971.9-4-1-9.loads
tftp-server flash:kern9971.9-4-1-9.sebn
tftp-server flash:rootfs9971.9-4-1-9.sebn
tftp-server flash:dkern9971.100609R2-9-4-1-9.sebn
tftp-server flash:sboot9971.031610R1-9-4-1-9.sebn
tftp-server flash:skern9971.022809R2-9-4-1-9.sebn
tftp-server flash:/g4-tones.xml alias United_States/g4-tones.xml
tftp-server flash:/gd-sip.jar alias English_United_States/gd-sip.jar
control-plane
mgcp profile default
telephony-service
max-ephones 24
max-dn 48
ip source-address 172.25.140.1 port 2000
cnf-file location flash:
load 7960-7940 P00308010200
load 7942 SCCP42.9-3-1SR3-1S.loads
load 7945 SCCP45.9-3-1SR3-1S.loads
load 7962 SCCP42.9-3-1SR3-1S.loads
load 7965 SCCP45.9-3-1SR3-1S.loads
max-conferences 8 gain -6
dn-webedit
transfer-system full-consult
create cnf-files version-stamp 7960 Feb 11 2014 07:18:32
ephone-dn 1
number 1001
description Phone 1
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 1002
description Phone 2
name Phone 2
hold-alert 30 originator
ephone-dn 3
number 1003
description Phone 3
name Phone 3
hold-alert 30 originator
ephone 1
device-security-mode none
mac-address 001C.58FB.6E0F
button 1:1
ephone 2
device-security-mode none
mac-address 0014.A981.7F8A
button 1:2
ephone 3
device-security-mode none
mac-address 0006.5356.A4B8
button 1:3
alias exec con conf t
alias exec sib show ip int brief
alias exec srb show run | b
alias exec sri show run int
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
line vty 5 15
privilege level 15
login local
transport input telnet ssh
transport output telnet ssh
scheduler allocate 20000 1000
ntp master 1
end
C2811# -
Cannot install windows, starting to get really pissed off with this PLEASE HELP
ok, i'm starting to get agitated with this.
i cannot install windows XP, 2003, OR Longhorn on my machine.
right now, i have the following setup:
msi 865pe neo2 motherboard
intel p4 3.2ghz w/HT (factory HS/Fan currently)
1 dimm of PC3200 crucial DDR400
30GB maxtor HD plugged into primary IDE
pioneer dvd/cd drive as sencondary IDE
alps 3.5" floppy drive
antec true blue 480wt PSU
i do the following:
format with maxtor cd
boot from OS cd
start setup, reboot, continue
the farthest i can get is 'registering components/completing installation' i either get a blue screen stop error which isnt the same everytime, or it just locks up and doesnt do anything.
ran the memtest checker and get errors on test #4
i had a DIMM of kingston that gave the same errors, so i RMA'd it and got another. same errors, so i RMA'd again and got a Crucial stick. same errors.
so i RMA'd the motherboard since i figured it had to be that. and it improved from the problems i had earlier. (the problems i had before were worse before.)
below are my BIOS settings. SOMEONE WHO KNOWS PLEASE HELP ME!
advanced bios features:
quick boot - enabled
boot order - floppy, cd, HDD
full logo - disabled
s.m.a.r.t - enabled
num-lock on boot - enabled
floppy swap - disabled
floppy seek - enabled
save rom to HD - no
boot to os/2 - no
hyper threading - disabled
mps revision - 1.4
apic acpi sci irq - disabled
cpu l1 & l2 cache - enabled
bios cacheable - disabled
c000, 32k shadow - disabled
advanced chipset:
dram timing...
configure by spd - enabled
(i dont know what to set timing to, nothing anyone has since said helps)
integrated perfs:
usb controller - enabled (same errors if its disabled too so its not USB)
usb device legacy support - disabled
on chip IDE:
operate mode - legacy mode
ata config - pata only
sata keep enabled - yes (for sata drive i have, error either way)
pata channel selection - both
onboard ethernet, 1394, prmoise ide and audio all DISABLED
pc healt status:
cpu - 49°C/120°F (idle sitting in bios)
system temp - 28°C/82ºF
cpu fan - 2678rpm
nb fan speed - 6490rpm
vcore - 1.456 up to 1.502
3.3v - 3.232v
+5.0v - 5.003v
+12v - 11.680v
-12v - -11.743v
-5.0v - -4.826v
battery - 2.896v
+5V SB - 4.945
freq/voltage control
Dynamic OC - disabled
cpu ratio locked
dram freq - auto
spread spectrum - enabled
cpu bus clock - 200
ddr clock (grayed out) - 400
adjust agp/pci - 66.66/33.33
cpu vcore adjust - no
cpu vcore (grayed out) - 1.5500v
ddr power voltage - 2.65v
agp power voltage - 1.50v
SOMEONE PLEASE HELP ME!!!!!
i'm running out of time, money, patience.
if it cant be solved i'm going to set myself on fire!Quote
Originally posted by REILLY875
Do NOT try the 250 Watt PSU!!, As "Wonk" said if you happen to Blow it, the PSU will most likely Take out the Mo-Bo with it! And maybe the CPU to, due to the Voltage Spike you would get ...I would not put to much Credence into the fact that as of now the +12V and the +3.3V Rails are reading a little low,(I say this because it is indeed a ANTEC), as this could be the Monitoring Hardware, or the Software that might be reading wrong....If I where you I would First set the Memory Timings Manually to 3-4-4-7-8, And up the DRAM (VDIMM) Voltage to 2.7 Volts, and if it still wont Load, I would Definitly try a different DIMM Slot, and Rince and Repeat .....If you dont mind me asking , Why are you running with just 1 Module?....Is it on purpose or are you saving up for More?................Sean REILLY875
yea, i dont plan to run the 250. im gonna wait for the new 480.
thanks for the info about ram timings as well. i havnt gotten any solid answers about what to set it to.
even with new mobo and ram, i'm getting errors in memtest86 #4 test as i always have. i've tried different slots with same problems.
i only have one module because i dont want to waste anymore money on a non-working system. once i get it up and running i'll add another 512. -
Cannot log into AD on Mountain Lion. Please help! I got the logs
My company has been experiencing this problem ever since Mountain Lion released.
The problem is, we cannot log into AD on all of our MAC who currently runs Mountain Lion. We, however, can log into AD fine with Lion and Snow Leopard just fine. We only use AD, we don't use Open Directory or have any Apple server.
I have gather some logs using the SSH. Please help me view the logs and let me know what's going on if possible.
Here are the steps that I performed before capture these logs.
I format the hard drive and installed a new OS X 10.8.2 on the hard drive using the Recovery Mode (Hold down option Key while boot).
I created a new computer name call ittest-mac3 in AD and assigned to proper OU. I changed the computer name under System Preferences ==> Sharing to "ittest-mac3".
3. I bind this Macbook Pro to our Active Directory via xyz.com. The bind was successful. I enabled "Create mobile account at login", "Required confirmation before creating a mobile account", " Force local home directory on start up disk", " Use UNC path from active directory to derive network home location", "Default user shell: /bin/bash/. Network protocol to be used: smb:
After I reboot the Mac client, I was unable to log into it using our regular AD user account (consider all of our employees has regular account).
I created 2 test accounts for Mac on Active Directory, they are "mac test" and "mac test 2".
With "mac test" account, I configured everything the same as our regular account in AD. Which I was not able to log into the Mac client using this account.
With “mac test 2” account, I configured everything the same as our regular account in AD EXCEPT for UNIX Attributes. I was successfully logged into the Mac client using this user account.
So the problem is ... set the Unix Attributes for NIS domain on the AD account prevent everyone of us in our company to log into AD on any client that have Mountain Lion OSX installed.
Here are the logs:
Log1. This logs showed successful when log into AD on a Mountain Lion OSX using an AD account that don't have UNIX attributes setting configure.
login as: administrator
Using keyboard-interactive authentication.
Password:
Last login: Mon Dec 17 08:43:38 2012
ittest-mac3:~ administrator$ sudo su -
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
ittest-mac3:~ root# cd /var/log
ittest-mac3:log root# tail -f system.log
Dec 17 09:02:19 ittest-mac3.local SecurityAgent[650]: *** WARNING: -[NSImage com
positeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Pleas
e use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:02:50 ittest-mac3.local sshd[659]: Accepted keyboard-interactive/pam f
or administrator from 10.10.202.63 port 50738 ssh2
Dec 17 09:02:50 ittest-mac3.local sshd[659]: USER_PROCESS: 665 ttys000
Dec 17 09:04:59 ittest-mac3.local sudo[673]: administrator : TTY=ttys000 ; PWD=/
Users/administrator ; USER=root ; COMMAND=/usr/bin/su -
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_authenticate(): authenticat
ion succeeded
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): The group chec
k succeeded.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_acct_mgmt(): OpenDirectory
- Membership cache TTL set to 1800.
Dec 17 09:04:59 ittest-mac3.local su[674]: in od_record_check_pwpolicy(): retval
: 0
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): No session
type specified.
Dec 17 09:04:59 ittest-mac3.local su[674]: in pam_sm_open_session(): Going to sw
itch to (root) 0's Background session
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.override' by client
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'config.modify.com.apple.familycontrols.loginwindow.override' by
client '/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resource s/parentalcontrolsd' [679] for authorization created by
'/System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/Resources /parentalcontrolsd' [679] (3,0)
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: User info context values set for mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got user: mtest2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Context initialised
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Got cache_name: API:164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Environment done: KRB5CCNAME=164370296:1
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Cache closed
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in ac_complete(): ac_complete returned: 0 for 164370296
Dec 17 09:07:19 ittest-mac3.local authorizationhost[680]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:07:19 ittest-mac3.local SecurityAgent[650]: Login Window login proceeding
Dec 17 09:07:19 ittest-mac3.local ManagedClient[644]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest2", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:07:20 ittest-mac3 kernel[0]: Sandbox: kcm(681) deny mach-lookup com.apple.networkd
Dec 17 09:07:20 ittest-mac3.local MCXCompositor[690]: CFPreferences: user home directory for user kCFPreferencesCurrentUser at is unavailable. User domains
will be volatile.
Dec 17 09:07:20 ittest-mac3.local UserNotificationCenter[696]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It
should not be used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/CoreServices/ManagedClient.app' [644] for authorization created by '/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record from kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/mtest2</url><path>/</path></home_dir>
Dec 17 09:07:24 ittest-mac3.local ManagedClient[644]: ODUMakeMobileMCXRecord: updating record to kDSNAttrOriginalHomeDirectory =
<home_dir><url>smb://pros-fsvr2/home/</url><path>mtest2/</path></home_dir>
Dec 17 09:07:25 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:26 --- last message repeated 1 time ---
Dec 17 09:07:26 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.164370296): Throttling respawn: Will start in 4 seconds
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: Unable to talk to lsboxd
Dec 17 09:07:26 ittest-mac3.local writeconfig[697]: SFL(697): AddNewItemWithProperties_rpc returned 5
Dec 17 09:07:26 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.preferences' by client
'/System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig' [697] for authorization created by
'/System/Library/CoreServices/ManagedClient.app' [644] (100002,0)
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: # distnote server agent absolute time: 3817.482079135 civil time: Mon Dec 17 09:07:30 2012 pid: 721
uid: 164370296 root: no
Dec 17 09:07:30 ittest-mac3.local distnoted[721]: Bug: 12C60: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
Dec 17 09:07:30 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.console' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100003,0)
Dec 17 09:07:30 ittest-mac3.local loginwindow[641]: Login Window - Returned from Security Agent
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort,
err: 1102
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: USER_PROCESS: 641 console
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: UserName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.gamed): Ignored this key: GroupName
Dec 17 09:07:31 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find:
com.apple.ReportCrash.Self
Dec 17 09:07:31 ittest-mac3.local loginwindow[641]: Connection with distnoted server was invalidated
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/System/Library/CoreServices/UserAccountUpdater' [727] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/System/Library/CoreServices/UserAccountUpdater' [727] (100002,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Session 100015 created
Dec 17 09:07:31 ittest-mac3.local MRT[731]: MRT finished scan. Malware files were not found.
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/MRT' [731] for authorization created by '/usr/libexec/MRT' [731] (2,0)
Dec 17 09:07:31 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client
'/usr/libexec/launchdadd' [730] for authorization created by '/usr/libexec/MRT' [731] (100002,0)
Dec 17 09:07:31 --- last message repeated 1 time ---
Dec 17 09:07:31 ittest-mac3.local blued[68]: kBTXPCUpdateUserPreferences gConsoleUserUID = 164370296
Dec 17 09:07:31 ittest-mac3.local locationd[738]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this
compatiblity mapping behavior in the near future.
Dec 17 09:07:31 ittest-mac3.local locationd[738]: NOTICE,Location icon should now be in state 0
Dec 17 09:07:31 ittest-mac3.local UserEventAgent[725]: cannot find fw daemon port 1102
Dec 17 09:07:34 ittest-mac3.local com.apple.SecurityServer[15]: Succeeded authorizing right 'system.login.done' by client
'/System/Library/CoreServices/loginwindow.app' [641] for authorization created by '/System/Library/CoreServices/loginwindow.app' [641] (100002,0)
Dec 17 09:07:36 ittest-mac3.local CalendarAgent[753]: Could not find Meta Data for persistent Store
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:07:37 ittest-mac3.local WindowServer[76]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:07:37 ittest-mac3.local genatsdb[764]: ########## genatsdb Sandboxed. ##########
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSCopyWindowShape: pid (763) passed NULL window
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: could not update menu bar region, 1000
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectToBase: in class NSView is deprecated on 10.7 and later. It should not
be used in new applications.
Dec 17 09:07:37 ittest-mac3.local SystemUIServer[763]: *** WARNING: Method convertRectFromBase: in class NSView is deprecated on 10.7 and later. It should
not be used in new applications.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:38 ittest-mac3.local SystemUIServer[763]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:07:39 ittest-mac3.local genatsdb[764]: *GENATSDB* FontObjects generated = 392
Dec 17 09:07:53 ittest-mac3 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Dec 17 09:07:53 ittest-mac3 kernel[0]: macx_swapoff SUCCESS
Dec 17 09:07:59 ittest-mac3.local Setup Assistant[751]: INFO: MMAccountMgr_Private: finishedSetup called.
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3). Setting up event to tell us when to
try again: 2: No such file or directory
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.afpstat-qfa[793]): Job failed to exec(3) for weird reason: 2
Dec 17 09:07:59 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 39931
Dec 17 09:07:59 --- last message repeated 4 times ---
Dec 17 09:07:59 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mrt.uiagent[783]): Exited with code: 255
Dec 17 09:07:59 ittest-mac3.local NetworkBrowserAgent[796]: Starting NetworkBrowserAgent
Dec 17 09:07:59 ittest-mac3.local imagent[786]: [Warning] Setting up a new messages database.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:07:59 ittest-mac3.local Finder[775]: *** WARNING: Method userSpaceScaleFactor in class NSView is deprecated on 10.7 and later. It should not be
used in new applications. Use convertRectToBacking: instead.
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: dict count after removing entry for window 0xfe is 0
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=243
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Could not terminate job: 3: No
such process
Dec 17 09:09:09 ittest-mac3 com.apple.launchd[1] (com.apple.quicklook.satellite.D6822423-2893-4C1C-B282-5022A61D589C[806]): Using fallback option to
terminate job...
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] ([0x0-0x44044].com.apple.AppleSpell[767]): Exited: Terminated: 15
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.quicklook[803]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification
kLSNotifyApplicationDeath to notificationID=272
Dec 17 09:09:09 ittest-mac3 com.apple.launchd.peruser.164370296[712] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[813]): Exited: Killed: 9
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: DEAD_PROCESS: 641 console
Dec 17 09:09:09 ittest-mac3.local migCacheCleanup[736]: Cache cleanup: cleanup for user 164370296 took 0.07 seconds
Dec 17 09:09:09 ittest-mac3.local coreservicesd[73]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending
notification kLSNotifyApplicationDeath to notificationID=260
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXGetConnectionProperty: Invalid connection 8727
Dec 17 09:09:09 --- last message repeated 4 times ---
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: CGXRestartSessionWorkspace: session workspace exited for session 257 (on console)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: Session 257 released (0 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[76]: loginwindow connection closed; closing server.
Dec 17 09:09:09 ittest-mac3.local loginwindow[641]: CGSFlushWindowContentRegion: Invalid connection
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSGetNextEventRecord (Inline) connection 0x201b, 16384 bytes
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[725]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:09 ittest-mac3.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=15883 Died
Dec 17 09:09:09 ittest-mac3.local loginwindow[826]: Login Window Application Started
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Server is starting up
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 released (1 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Session 256 retained (2 references)
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: init_page_flip: page flip mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: mux_initialize: Mode is dynamic
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor enabled for tile size [256 x 256]
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXGLInitMipMap: mip map mode is on
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: WSMachineUsesNewStyleMirroring: true
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x4 for display 0x042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x5 for display 0x003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x6 for display 0x003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Created shield window 0x7 for display 0x003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: GL mask 0x11; bounds (0, 0)[1440 x 900], 27 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a00f, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00f00000000042803c0
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: GL mask 0x8; bounds (2464, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXPerformInitialDisplayConfiguration
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; Alias(4, 0x11); Vendor 0x610 Model 0xa00f S/N 0 Dimensions
13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x
0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: CGXMuxBoot: Boot normal
Dec 17 09:09:09 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, accelerator 0x0000494b, unit 0, caps QEX|
QGL|MIPMAP, vram 1024 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01022647, GL mask 0x0000000f, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, accelerator 0x00004833, unit 4, caps QEX|
QGL|MIPMAP, vram 580 MB
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000010, texture units 8, texture max 16384,
viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Created shield window 0x8 for display 0x042803c0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:10 ittest-mac3.local launchctl[829]: com.apple.findmymacmessenger: Already loaded
Dec 17 09:09:10 ittest-mac3.local com.apple.SecurityServer[15]: Session 100018 created
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSShutdownServerConnections: Detaching application from window server
Dec 17 09:09:10 ittest-mac3.local hidd[59]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Log2: This log showed was captured when we logged into a test account that have Unix Attributes configure just like our regular user's account.
^C
ittest-mac3:log root# tail -f system.log
Dec 17 09:09:10 ittest-mac3.local loginwindow[826]: Login Window Started Security Agent
Dec 17 09:09:10 ittest-mac3.local UserEventAgent[831]: cannot find useragent 1102
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: MacBuddy was run = 0
Dec 17 09:09:10 ittest-mac3.local WindowServer[827]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042803c0 device: 0x1072ab320
isBackBuffered: 1 numComp: 3 numDisp: 3
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and
later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use
-[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:10 ittest-mac3.local SecurityAgent[836]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later.
Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Dec 17 09:09:11 ittest-mac3.local WindowServer[827]: Display 0x042803c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferFormula (1.000000,
1.000000, 1.000000)
Dec 17 09:09:41 --- last message repeated 1 time ---
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: User info context values set for tle
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got ruser: (null)
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Got service: authorization
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): Stashing kcm credentials in enviroment for kcminit: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800.
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_check_pwpolicy(): retval: 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in od_record_attribute_create_cfstring(): returned 2 attributes for
dsAttrTypeStandard:AuthenticationAuthority
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Establishing credentials
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got user: mtest
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Context initialised
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got euid, egid: 0 0
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done getpwnam()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done setegid() & seteuid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: init credential cache
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: storing credential for: [email protected]
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Got cache_name: API:2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Environment done: KRB5CCNAME=2137600189:2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Cache closed
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup2
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup3
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done seteuid() & setegid()
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): Done cleanup4
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in ac_complete(): ac_complete returned: 0 for 2137600189
Dec 17 09:10:13 ittest-mac3.local authorizationhost[844]: in pam_sm_setcred(): pam_sm_setcred: ntlm done, used domain: PROS1
Dec 17 09:10:13 ittest-mac3.local SecurityAgent[836]: Login Window login proceeding
Dec 17 09:10:13 ittest-mac3.local ManagedClient[830]: ODUGetMCXRecordWithCache(): [ODRecord setNodeCredentialsWithRecordType:"dsRecTypeStandard:Users"
authenticationType:kDSStdAuthNodeNativeRetainCredential authenticationItems:["mtest", password]]) == 2100 (Connection failed to the directory server.) [This
error is ignored and is only being flagged for notification]
Dec 17 09:10:13 ittest-mac3 com.apple.launchd[1] (com.apple.launchd.peruser.4294967295[846]): getpwuid("4294967295") failed
Dec 17 09:10:13 ittest-mac3 com.apple.launch-Reece,
We only have 1 single domain, 1 domain forest, no subdomains, only alias. I had replied to the other post as well. But I am happy to paste it here in case anyone want to read it.
So, after a few months of testing, capture and sending logs back and forth to Apple Engineers, we found out there is a setting in AD, under User Account that prevent us to log into AD from Mountain Lion. If you would go to your AD server, open up a user account properties, then go to Account tab, the "Do not require Kerberos preauthentication" option is checked. As soon as I uncheck that option, immediately I was able to log into AD on the Mac client. Apple engineers copied all my AD settings and setup a test environment on their end and match exact mine AD environment. They was able to reproduce this issue.
The bad part about this is... our environment required the "Do not require Kerberos preauthentication" is checked in AD, in order for our users to login into some of our Unix and Linux services. Which mean that it is impossible for us to remove that check mark because most, if not all of them some way or another require to login into applications that run on Unix and Linux. Apple is working to see if they can come up with a fix. Apparently, no one has report this issue except us. I believe most of you out there don't have that check mark checked in your environment... Anyone out there have any suggestion to by pass or have a work around for this? -
No Audio output please help!!!
I have a Toshiba Satellite A205S4617 Vista and audio wont come out of the speakers. I have tried:
1. Reinstalling audio driver from the Toshiba website
2. Updating all drivers from Control Panel - Sound - Device Menus (said everything was up to date but when I went to sound to do a test it said it failed)
3. System Restore (but it didn't give me an option to go back to yesterday when the audio was working, any idea how to get it to do that? )
4. Reboot F2,F9,F10 config restore
Any more ideas please help!!! thanks.Satellite A205-S4617
Time to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If the sound doesn't work then, you have a hardware malfunction.
-Jerry -
Please help with SIP configuration on 2801 router
Hi All.
Please help me to setup a SIP account. I’m already struggling to do that for a few days, and can’t find out how to finish that. We have 2xISDN lines running, so I need to add a SIP trunk to existing config.
The information from our SIP provider:
We have issued the following DDI range: 018877000 – 99
There is no need to register the DDI’s as these will be offered to your PABX IP address provided to in the completed SIP trunking form.
Configuration details are as follows:
Our Primary Proxy:- 99.234.56.78
Codec supported:- G711Alaw, G729 (G711Alaw is the preferred codec)
Fax Support:- T38 and G711Alaw
DTMF:- RFC2833 and INFO
CLI Method:- Remote-Party-ID
Trunk doesn’t require registration; you just need to send Invite. In cisco this is done through Dial-peer session-target command. We are authenticating your IP address for outgoing calls and incoming calls we then forward to the IP mentioned in the sip form.
This is a SIP configuration on Cisco2801 router (I used outgoing calls only):
translation-rule 10
Rule 0 ^90 0
Rule 1 ^91 1
Rule 2 ^92 2
Rule 3 ^93 3
Rule 4 ^94 4
Rule 5 ^95 5
Rule 6 ^96 6
Rule 7 ^97 7
Rule 8 ^98 8
Rule 9 ^99 9
interface FastEthernet0/0.1
description ***DATA VLAN***
encapsulation dot1Q 1 native
ip address 10.1.1.101 255.255.255.0
interface FastEthernet0/0.2
description ***VOICE VLAN***
encapsulation dot1Q 2
ip address 192.168.22.1 255.255.255.0
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
call start slow
sip
bind control source-interface FastEthernet0/0.2
bind media source-interface FastEthernet0/0.2
registrar server expires max 36000 min 600
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 1 pots
description ### External Dialling via BRI ###
preference 7
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/0
forward-digits all
dial-peer voice 2 pots
description ### External Dialling via BRI ###
preference 2
destination-pattern 9T
translate-outgoing called 10
direct-inward-dial
port 0/0/1
forward-digits all
dial-peer voice 9000 voip
description ** Outgoing calls to SIP **
preference 1
destination-pattern 9T
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target ipv4:99.234.56.78:5060
dtmf-relay rtp-nte
codec g711alaw
no vad
sip-ua
timers connect 100
sip-server ipv4:99.234.56.78
I used debugging commands to troubleshoot the calls.
2801(config-dial-peer)#
094509: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=211, Called Number=, Voice-Interface=0x65FA35B4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094510: Jan 24 09:27:06.204: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=20018
094511: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9, Peer Info Type=DIALPEER_INFO_SPEECH
094512: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9
094513: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094514: Jan 24 09:27:06.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094515: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90, Peer Info Type=DIALPEER_INFO_SPEECH
094516: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90
094517: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094518: Jan 24 09:27:06.816: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094519: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908, Peer Info Type=DIALPEER_INFO_SPEECH
094520: Jan 24 09:27:06.912: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908
094521: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094522: Jan 24 09:27:06.916: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094523: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086, Peer Info Type=DIALPEER_INFO_SPEECH
094524: Jan 24 09:27:07.012: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086
094525: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094526: Jan 24 09:27:07.016: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094527: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862, Peer Info Type=DIALPEER_INFO_SPEECH
094528: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862
094529: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094530: Jan 24 09:27:07.116: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094531: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621, Peer Info Type=DIALPEER_INFO_SPEECH
094532: Jan 24 09:27:07.212: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621
094533: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094534: Jan 24 09:27:07.216: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094535: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215, Peer Info Type=DIALPEER_INFO_SPEECH
094536: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215
094537: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094538: Jan 24 09:27:07.316: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094539: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157, Peer Info Type=DIALPEER_INFO_SPEECH
094540: Jan 24 09:27:07.412: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157
094541: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094542: Jan 24 09:27:07.416: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094543: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=908621577, Peer Info Type=DIALPEER_INFO_SPEECH
094544: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=908621577
094545: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094546: Jan 24 09:27:07.516: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094547: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=9086215777, Peer Info Type=DIALPEER_INFO_SPEECH
094548: Jan 24 09:27:07.612: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=9086215777
094549: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094550: Jan 24 09:27:07.616: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094551: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094552: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094553: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Partial Matches(1) after DP_MATCH_DEST
094554: Jan 24 09:27:07.716: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=MORE_DIGITS_NEEDED(1)
094555: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
094556: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
094557: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094558: Jan 24 09:27:10.711: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094559: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094560: Jan 24 09:27:10.711: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094561: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094562: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094563: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
094564: Jan 24 09:27:10.715: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
094565: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
094566: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
094567: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
094568: Jan 24 09:27:10.715: //-1/6A877F6F9054/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
094569: Jan 24 09:27:10.719: fb_get_reject_cause_code: ERROR cause_code NULL
094570: Jan 24 09:27:10.727: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397230
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094571: Jan 24 09:27:11.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:11 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397231
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094572: Jan 24 09:27:12.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam " <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam " <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:12 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397232
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
094573: Jan 24 09:27:14.227: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.22.1:5060;branch=z9hG4bK47D116D3
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Sam" <sip:[email protected]>;tag=CDCFB8AC-F98
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 09:27:14 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 1787264879-1168380385-2421457215-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327397234
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 244
v=0
o=CiscoSystemsSIP-GW-UserAgent 3237 2021 IN IP4 192.168.22.1
s=SIP Call
c=IN IP4 192.168.22.1
t=0 0
m=audio 18258 RTP/AVP 8 101
c=IN IP4 192.168.22.1
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I made some changes in the router configuration.
I removed FA0/0.2 Voice interface from Voice service voip configuration (bind control source-interface FastEthernet0/0.2 and bind media source-interface FastEthernet0/0.2). And now it’s using ip address 10.1.1.101 (data ip).
The debugging is changed now. I can send and receive a respond from SIP server. But It shows an error: SIP/2.0 404 Not Found
Then it moves to ISDN line, and use this line to make a call.
102988: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774T, Peer Info Type=DIALPEER_INFO_SPEECH
102989: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774T
102990: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102991: Jan 24 14:45:47.290: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102992: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=90862157774, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102993: Jan 24 14:45:47.290: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
102994: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
102995: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
102996: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
102997: Jan 24 14:45:47.294: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
102998: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
102999: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
103000: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103001: Jan 24 14:45:47.294: //-1/EDCA21089304/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
103002: Jan 24 14:45:47.298: fb_get_reject_cause_code: ERROR cause_code NULL
103003: Jan 24 14:45:47.310: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
Remote-Party-ID: "Sam" <sip:[email protected]>;party=calling;screen=no;privacy=off
From: "Seam" <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 3989446920-1171263969-2466545983-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327416347
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 2438 9821 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 19412 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
103004: Jan 24 14:45:47.354: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 404 Not Found
From: "Sam "<sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Call-ID: [email protected]
CSeq: 101 INVITE
Via: SIP/2.0/UDP 10.1.1.101:5060;received=88.99.77.44;branch=z9hG4bK4875CB9
Content-Length: 0
103005: Jan 24 14:45:47.362: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK4875CB9
From: "Sam " <sip:[email protected]>;tag=CEF37490-172C
To: <sip:[email protected]>;tag=7fad61f03708-100007f-13c4-55013-a0142-10fd12c8-a0142
Date: Tue, 24 Jan 2012 14:45:47 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
103006: Jan 24 14:45:47.374: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0/1, TEI 96 changed to up
103007: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=211, Peer Info Type=DIALPEER_INFO_SPEECH
103008: Jan 24 14:45:51.313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=211
103009: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
103010: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=20018
103011: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=0862157774, Peer Info Type=DIALPEER_INFO_SPEECH
103012: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=0862157774
103013: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)
103014: Jan 24 14:45:51.317: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=NO_MATCH(-1)
103015: Jan 24 14:46:08.815: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0/1, TEI 96 changed to down
2801(config-dial-peer)#
Then I removed SIP-UA as I was told there is no registration necessary, only Dial-peer configuration.
But it didn’t affect anything.
Then I add translate-outgoing called 10 command to dial-peer 9000, nothing happened.
Really stuck and don't know where to look at.
Any help will be highly appreciated.
Thanks.Hi Dan.
Yes, I saw that RTP debugging, but what can I change there? Maybe I need to open more ports on ASA for RTP like 19412?
I use Cisco ASDM for ASA to make changes.
There are static NAT rules for: Server source IPs(10.1.1.100) to Outside(translated IPs, 88.99.77.44) for a few ports.
Also I added Security policy access rules for LAN: Any to SIP, and Outside: SIP to any.
For NAT:
I can't add this: for LAN: STATIC ROUTER IP 10.1.1.101 (AS SOURCE) UDP 5060 TO OUTSIDE IP 88.99.77.44
(AS TRANSLATED) UDP 5060
Because there is already translation for the Server.
Debugging looks like that now. There is no Received: SIP/2.0, but I can make an outside call with no audio.
116013: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=90862157774, Called Number=, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
116014: Jan 25 15:28:25.584: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=9000
116015: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Calling Number=, Called Number=90862157774, Peer Info Type=DIALPEER_INFO_SPEECH
116016: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=90862157774
116017: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
116018: Jan 25 15:28:25.584: //-1/0D0EB9CE9708/DPM/dpMatchPeersMoreArg:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=9000
2: Dial-peer Tag=2
3: Dial-peer Tag=1
116019: Jan 25 15:28:25.588: fb_get_reject_cause_code: ERROR cause_code NULL
116020: Jan 25 15:28:25.600: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:25 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505305
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116021: Jan 25 15:28:26.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:26 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505306
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116022: Jan 25 15:28:27.096: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam " ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:27 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505307
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
116026: Jan 25 15:28:57.092: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.101:5060;branch=z9hG4bK491484D
Remote-Party-ID: "Sam" ;party=calling;screen=no;privacy=off
From: "Sam " ;tag=D4410748-1C9D
To:
Date: Wed, 25 Jan 2012 15:28:57 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces
Min-SE: 1800
Cisco-Guid: 219068878-1184895457-2533916991-1958389preference 1771
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1327505337
Contact:
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 247
v=0
o=CiscoSystemsSIP-GW-UserAgent 1984 5803 IN IP4 10.1.1.101
s=SIP Call
c=IN IP4 10.1.1.101
t=0 0
m=audio 18782 RTP/AVP 8 101
c=IN IP4 10.1.1.101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
I'll add Incoming dial-peer now.
Not sure what kind of NAT rule should I put into ASA to allow in and out sip traffic.
Appretiate your help.
Thanks a mill. -
I have tried to re-install iTunes 11.0.3 at least 6 times.
I have also downloaded iTunes 11.0.3 at least 5 times.
I have changed my Apple ID password.
I have downloaded (again, I've done that many times) iTunes 11.0.3, then I switched off the iMac, then restarted the wi-fi modem. Switched on the iMac, loaded iTunes, same problem.
I tried to just switch off the wi-fi, did the same as point above, same problem.
Even tried to change the system date to 2038, this only seemed (although I doubt it) to fix the "not responding" issue which I had this morning.
The Apple ID password issue, where it asks me for the password loads and loads of times (probably 50 times or more), one after the other has been happening for about 3 days now.
Here is a copy of my message problem:
iTunes Problem, can't seem to find a solution online.
I am running OS X 10.8.3 on an iMac, have just loaded iTunes 11.0.3 a few days ago.
Firstly, I'd open iTunes and it would immediately say it was not responding, I'd have to force quit, try again, re-boot, try again etc. I tried re-installing iTunes, changing password, everything to no avail, then changed my date to 2038, and voila it started responding (no, don't ask me, I just read in online and was desperate enough to try it). Of course, I don't believe that this actually helped, I would like to know what did help or if there is something specific one needs to do to fix this.
I have not been able to get rid of this problem: Whenever I try to make a purchase it asks for my Apple ID password, dozens of times until I give up and press cancel, cancel, cancel.
Why does it do this? I don't want to purchase anything because I can't keep typing in my password again and again. I'm not exaggerating.
As I mentioned, I have tried to re-install iTunes, about 6 times, and I changed my password. I still get the same problem.
Also, my iTunes still looks like the classical iTunes and doesn't have the new interface.
Has anyone experienced this and was able to fix it, or does anyone know what the problem is? Please help, I'm at my wits end.Because too much time has passed I can't edit this into the prior comment, but here is the info regarding reverting to iTunes 11.0.2 (assuming you do have a time machine backup) from https://discussions.apple.com/message/22057703#22057703
W. Raider wrote:
Repairing permissions doesn't fix it.
I reverted to the previous version, 11.0.2.
1. Quit the new crash-prone iTunes.
2. Delete the app.
3. Restore v. 11.0.2 with Time Machine.
4. In your iTunes folder look for a folder called "Previous iTunes Libraries", find the latest one.
5. In the iTunes folder itself you'll see "iTunes Library.itl", delete it (or compress it and save a copy for later just in case.
6. Copy the newest .itl file in Previous iTunes Libraries to the iTunes folder and rename it "iTunes Library.itl".
7. Launch the older version of iTunes.
My crashing has seemed to have ceased with a revert to an older version. I noticed today that the newer crashing iTunes had been launched for hours but not playing anything, when I played internet radio it crashed within 5mins, fed up I reverted to an older version.
Btw, a simpler way to do this is to revert to older iTunes app, then hold Option when it launches and choose an older library. -
Why the same name of process comes out in AIX , in java. please help me.
Hello.
I have two questions related to Jvm.
I've developed Job scheduler program which is doing somthing as the DB schedule is set in the way of Multi
thread. Currently , I'm in the process of testing this one. It is good , if in the normal case. However, When
doing Shell, if the application have so a lot to do the Shell, it has a little problem.
My developing environment is
OS : AIX 5.3
JRE : IBM J9 VM (build 2.4, JRE 1.6.0 IBM J9 2.4 AIX ppc-32 jvmap3260sr7-20091214_49398
(JIT enabled, AOT enabled)
nofiles(descriptors) 2000
maxuproc 4096 Maximum number of PROCESSES allowed
per user True
In order to execute Shell in My Scheduler program , I tested Runtimeexec() or ProcessBuilder.
The result of mine in the test , when the executed Shell got over 300 is
1. The jvm processes that I execute at the first time are shown up , after Shell go to the finish, the
processes are all in the disappearance again , and at last The processes that I executed at the first time are
remaining. It's like the process is duplicated process in the maximum of 70.
When I do shell about 200 to be executed simultaneously, Duplicated jvm about 3 appeared momentarily, then
disappeared, and also under 120, No duplicated case is found when under 120.
ps -ef result is below , when shell is excuted
UID PID PPID C STIME TTY TIME CMD
jslee 626906 1 0 11, May - 2:20 java -
DD2_JC_HOME=/source/jslee/JOB -Dfile.encoding=euc-kr jobserver.JobServerMain
jslee 1421522 626906 0
19:36:16 - 0:00 java -DD2_JC_HOME=/source/jslee/JOB -Dfile.encoding=euc-kr jobserver.JobServerMain
....Skip.....
jslee 4374620 626906 0 19:34:06 - 0:00 java -DD2_JC_HOME=/source/jslee/JOB -
Dfile.encoding=euc-kr jobserver.JobServerMain
(the process list about 60)
*the first question : Why a lot of duplicated jvm are shown up when in alot of shell to be executed ?
*the second question : As you can see above , How can I solve out the problem.
*Is there some option that I can set up when starting Jvm?
---Next question---
My developing environment is
OS : SunOS 5.8
JRE : Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server
VM (build 16.0-b13, mixed mode)
nofiles(descriptors) 256
As shown obove , the value of descriptors is 256 .
My scheduler program executed 300 shell at the same time, in result my program was abnormalily
terminated after doing shell about 180.
the Exception info is
java.io.IOException: Cannot run program "sh": error=24, exceeding the number of opened files
at
java.lang.ProcessBuilder.start(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
at
java.lang.Runtime.exec(Unknown Source)
at java.lang.Runtime.exec(Unknown Source)
or
java.net.SocketException: exceeding the number of opened files at java.net.PlainSocketImpl.socketAccept
(Native Method)
또는
java.io.IOException: exceeding the number of opened files at
java.io.UnixFileSystem.createFileExclusively(Native Method)
at java.io.File.checkAndCreate(Unknown
Source)
at java.io.File.createTempFile(Unknown Source)
*question : If I continuously request to open a file that go over system limit, is it possible for JVM to be
terminated?
*question : Is there a method that obtains state of System limit in the java library.
*question : what is the best solution to cope with ?
Please help me
=struts-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
<struts-config>
<form-beans>
<form-bean name="registrationForm" type="ndlinh.struts.lab.RegistrationForm" />
</form-beans>
<action-mappings>
<action path="/register"
type="ndlinh.struts.lab.RegistrationAction" // action class
name="registrationForm" // form bean name
validate="false"
scope="request"
input="registration.jsp" >
<forward name="success" path="/jsp/success.jsp" />
<forward name="failure" path="/jsp/failure.jsp" />
</action>
</action-mappings>
</struts-config>HTH
Maybe you are looking for
-
BOM in Scheduling agreement (Type LZ)
HI I am using scheduling agreement (Type LZ) for maintaining my sales plan for a period of 4 months. (1st one month - daily & subsequent months as weekly requirements). Ii would create delivery and invoices for each supply. Pricing previously was bas
-
How to parse UDP byte stream ?
Hello, I receive binary sensor data from different sensors via UDP (Header + Data (e.g. 4 byte uint) + End). I can read the data as a string (I used the UDP Receiver.vi example), but what is an efficient way to parse the data und to view the data on
-
Converting a standalone SOA/AIA instance to a cluster instance.
Hi Architects, We have a SOA/AIA11g instance running as a standalone instance with DR configured. Now team wants to convert this standalone instance to a 2 node clustered instance. Can someone let us know if it is possible to convert a standalone SOA
-
Mac pro 2014 restarting unexpedly
Well. I just posted about this and Apple removed my post. I guess I put too much emotion into my post. So this time i'll shorten it: My $10,000 mac pro keeps restarting with no warning. Apple refuses to replace it or give me a refund. I am hurt. Anyo
-
Hi my 4s is not working with reliance cdma (india-chennai) .
hi my new iphone 4s is not working in reliace cdma in india chennai so pls help me to sort it out thanks