Please help - CSAuth Fails to load after upgrading from V3.3 to V4.0.1

We have recently upgraded ACS V3.3 to V4.0.1 on Windows server 2003 SP1. However, now the windows service CSAuth fails to start. There's nothing in the CSAuth log file either.
If we do clean installs, installing V3.3 from new and then do a upgrade to V4.0.1 on a clean system it works fine.
The problem seems to be when we install fresh 3.3, then replicate our existing dbase to it, then upgrade to 4.0.
Does anyone have any ideas - any thoughts would be most welcomed,
Thanks, in advance,
Malcolm

Hi
When you say nothing in the csauth log... do you mean nothing at all... or nothing that looks like an error?
Try setting logging to max and seeing where it gets to.
I suspect there is something in your 3.3 config that doesnt get upgraded corectly. Its impossible for every scenario to be tested - Im not sure how much upgrade testing actually gets done. Probably left until the end of the test cycle.
Darran

Similar Messages

Please help. my ical wont load after upgrading to ios 10.7.5

yesterday I upgraded to ios 10.7.5 and now my ical won't load. i press the ical button, it appears in the dock, the white dot next to it flashes for about 3 seconds and then the ical icon disappears without ever loading. Please help.

yesterday I upgraded to ios 10.7.5 and now my ical won't load. i press the ical button, it appears in the dock, the white dot next to it flashes for about 3 seconds and then the ical icon disappears without ever loading. Please help.

Please help: Application doesn't work after upgrade to Workshop 8 sp2 from sp1

Hi,
Our application worked on workshop 8 sp1. After we upgrade system from sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list box in
forms, although user has chosen something from the drop down list box, the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files. After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet Explore
can not open this Internet site. The request site is either unavailable or can
not be found. Please try again later", although the server and the files are all
in local host server.
Please help. Thanks

Did you update your workshop application files and recompile your application?
A few things changed between GA and sp2, some annotations were renamed, and some
were added.
If you open up your application in Workshop sp2, it should given you the option
to upgrade your application.
Failing that, you may need to go through the code that is not performing as it
was before and check whether it was not utilising a bug that was fixed in sp2
and thus causes it to not function correctly now.
"Cynthia" <[email protected]> wrote:
>
Hi,
Our application worked on workshop 8 sp1. After we upgrade system from
sp1 to
sp2, some of the part doesn't work propertly any more.
1. netui:select seems not bind form data propertly. For drop down list
box in
forms, although user has chosen something from the drop down list box,
the returned
value in the form is always null.
2. we use Java script window.open(url,...) to download and view files.
After upgrade
from sp1 to sp2, clients keep getting IE error complaining that "Internet
Explore
can not open this Internet site. The request site is either unavailable
or can
not be found. Please try again later", although the server and the files
are all
in local host server.
Please help. Thanks

Windows Fails to Load After Upgrade to Mavericks

Related topic:
https://discussions.apple.com/activity?streamSource=connections
I'm a little late to this party, but hoping to find some help. I can see my WindowsXP Pro partition on the desktop, but after upgrading to Mavericks it won't fully start up. I'll get the usual screens, then the XP loading screen with the blue loading animation. After about 5 passes of the blue thing, it will hesitate and flash a blue screen so fast, that it took me several attempts to snap a photo so I could read it. "Unmountable_Boot_Volume" is the error. It then says to follow these steps... but cuts off and reboots.
One thing of note is that Parallels 10 uses the same XP virtual machine and boots just fine, so I figure XP can't be all that messed up. Maybe a driver issue, not sure. Does Mavericks not support XP? I'm open to Windows 7, but I'd like to backup some stuff first if possible. Maybe I can do that through Parallels?
Below are some details about my setup:
Als-Home-Mac:~ user$ diskutil list
THIS IS AN EXTRA FAT32 DRIVE
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *82.0 GB    disk0
   1:                 DOS_FAT_32 NEWMAN                  82.0 GB    disk0s1
THIS IS THE MAVERICKS DRIVE WITH XP PRO PARTITION
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Big Al Pro              833.6 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
   4:       Microsoft Basic Data                         165.7 GB   disk1s4
Als-Home-Mac:~ user$ diskutil cs list
No CoreStorage logical volume groups found
Als-Home-Mac:~ user$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=81964302336; sectorsize=512; blocks=160086528
gpt show: /dev/disk0: MBR at sector 0
      start       size index contents
          0          1         MBR
          1         62
         63 160086465      1 MBR part 11
Als-Home-Mac:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0    geometry: 9964/255/63 [160086528 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: 0B    0   1   1 - 1023 254 63 [        63 - 160086465] Win95 FAT-32
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

Mac Pro 3,1
Quad-Core Intel Xeon
2.8 GHz
Upgraded from 10.6.8, but I tried unsuccessfully to upgrade to Lion first. That went all screwy but was able to go all the way to Mavericks instead. Proobably where things got messed up. I don't remember exactly how I fixed it. I didn't think I could go that current with this hardware.
Als-Home-Mac:~ user$ sudo dd if=/dev/rdisk1s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS    .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 26 61 |........?....H&a|
00000020 00 00 00 00 80 00 80 00 ff 1f 4a 13 00 00 00 00 |..........J.....|
00000030 00 00 0c 00 00 00 00 00 ff a1 34 01 00 00 00 00 |..........4.....|
00000040 f6 00 00 00 01 00 00 00 cf 33 84 9c 53 84 9c d2 |.........3..S...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200

Help and Exit button appears after upgradation from External ITS to Integra

Hi All,
Though there some threads with similar problem but still I am not able to fix the problem.
After we upgraded from external ITS to Intergrated ITS some of the application started displaying "Exit" and "Help" buttons. Please note that most of the application are working fine though.
Kindly suggest.

Hi Edgar,
Thanks for the reply. Do I need to maintain this parameter from SE80 or from SICF? I had read in SE80 but it not help. I do not have authorization in SICF.
If it is to be done from SICF , please let me know.
Warm regards,
Aditya

Please HELP very important video lost after restoring from backup

I used my iphone 4 to record me preposing to my fiance and then today I stupidly sync to computer and restore from my 3GS backup before backing up the video files. Is there anyway to get the video back? Please help this is the most important thing in our life. Anything, Anyone please help. I am very devastated right now!

Too be honest. If you recorded the video on the iPhone 4, and then synced the iPhone 4 to iTunes to the computer it is usually connected to, then the video should be backed up.
I'm not sure though, how you managed to have your iPhone 4 up and running, but then restore from a backup from your 3GS?? If you have synced your iPhone 4 to iTunes before, then the backup will have been from the iPhone 4. You get the option the first time you connect the iPhone 4 to iTunes, to either setup as a new device or restore from a backup (that's if you have had a iPhone previously). You can restore the iPhone (which would set it up has a new device, which would remove everything off of it). If you have done this, has far as I know the old information off of the iPhone, would be still there until you synced the iPhone to iTunes again.
In Windows, the library file for iTunes is in username (whatever you are called) music/iTunes, the library file is called iTunes Library.itl, also in this location is the iTunes/iTunes Media folder, in there should be any video/s that have been synced from your iPhone.
Other information off of the iPhone are in the following location:
(You will need to first make sure you have Windows set to show hidden files & folders), Username/AppData/Roaming/Apple Computer
I hope you manage to find your video.

Ldmd fails to start after upgrading from RC3 to RR.

I followed instructions to a T, still have issues with ldmd starting. I made sure that old configs were removed and that /var/opt/SUNWldm was removed as instructions specifiy. I read on a previous post that resetting ALOM configs to default worked, any more information on what others have done to work around this would be appreciated.
Thanks.

Hi,
after upgrade did you rebooted your pc? try to reboot and double confirm below steps,
1) Once complete obiee11gv6 product installer
2) you need to run psa.cmd run as administrator (the two schema need to be upgraded :MDS & BIPLATFORM)
3) upgradenonj2eeapp.bat need complete for more refer my blog
http://obieeelegant.blogspot.com/2012/07/in-place-upgrading-of-obiee-111150-to.html
Thanks
Deva

Please help! Text format disappear after upgrade to vs2005

Post Author: oim
CA Forum: General
So I upgraded my VS2003 crystal version 10 C# code to VS2005 but the compiler gave me this error: 'CrystalDecisions.Shared.ExportFormatType' does not contain a definition for 'Text' the ExportFormatType enum now only has NoFormat = 0, CrystalReport = 1, RichText = 2, WordForWindows = 3, Excel = 4, PortableDocFormat = 5, HTML32 = 6, HTML40 = 7, ExcelRecord = 8, How do I get the Text format back? Thanks a lot!

Try deleting the .plists for Adobe Acobat.
Quit the application.
You need to look in your user Library/Preferences for the .plist. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Preferences. Move the .plist(s) to your desktop.
Open the application and test. If it works okay, delete the plist(s) from the desktop.
If the application is the same, return the .plist(s) to where you got them from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

Apple Please Help! Fail to burn after drive replacement & OS update

I am hoping that by now, you would find a solution for this. Many of us have been complaining of a similar issue...
I bought my MacBook Pro in March 2009 from Apple, Egypt. Just afterwards there was the OS update to 10.5.6. A bit later, I started having problems with burning DVDs/CDs under Toast. I thought it was a software glitch but it kept on freezing or displaying a hardware error message. I updated to 10.5.7 and the problem still persisted. I repaired disk permissions. Nothing still worked. A bit later, it stopped burning under Finder and iTunes as it froze during burning process. Then, burning with disk utility and finder started working again. I un-installed and re-installed Toast over ten times. I even downgraded to Toast 9. Same problem persisted.
Eventually, I asked Apple to replace my Super-Drive under the warranty when it stopped burning under finder and any other burning softwares (Toast, Burn, etc).
I just got it yesterday, and the same problem with Toast persists. This means that I have No Way to burn Video DVDs or MP3 Discs with folders or Video TS DVDs.
This has been a very inconvenient problem going on since April 2009. I am pretty upset because I'm a very biased user of Apple products and always trust that Apple offers us the top shelf products and the best service. I even worked for Apple Best-Buy (Egypt) as Business Development Manager for a while so I know how the system works. But I am truly disappointed in the lack of attention given to this repeated issue.
Please! At least give us a hint of what this problem is about. Clearly, it's not a hardware issue because the newly-replaced drive is still not working with Burning softwares. Only finder, disk utility & sometimes iTunes.
I will be waiting, patiently, again... in hope to get some productive feedback and finally find a solution for this extremely inconvenient issue.

Ok guys, I've finally found a solution from Roxio. They hadn't answered back for a long time. I found this in their support forums:
"Roxio finally suggested trashing preferences which, so far, has cured the problem. Here's the crux of their instructions. Thanks for the help.
roxio said:
Please follow the Folder Paths below. Once in the Specified folder, please move the following files to the Trash Can. Once all files are move to the Trash, please follow the instrcutions below.
Folder Paths:
Macintosh HD/Library/Prefrences/
Macintosh HD/Users/(your user name)/Library/Prefrences/
Trash these below files from both folders above(if found in both):
com.BelightSoft.DiscCover2.plist
com.BelightSoft.GetBackup2.plist
com.boinx.fotomagico.plist
com.elgato.VideoPlayer.plist
com.lightcrafts.app
com.lightcrafts.jai.plist
com.lightcrafts.metadata2.plist
com.lightcrafts.templates.plist
com.lightcrafts.ui.plist
com.lightcrafts.utils.plist
com.lqgraphics.motionpictures.plist
com.CDSpinDoctor6.plist
com.roxio.Deepseasoftware.CDSpindoctor.plist
com.roxio.Popcorn.plist
com.roxio.Streamer.plist
com.roxio.Toast.plist
com.tivo.desktop.plist
Popcorn Preferences
Roxio Toast Prefs
And any other com.Roxio.* files found. If you do not see the files in one folder, please check the other.
Now you will need to Secure Empty your Trash. Close all windows and return to your desktop, click Finder(menubar)> Secure Empty Trash and restart the computer."
I'll try this and see if it helps...

Please HELP- iMovie06 fails to load

Hi everyone!
I keep getting the 'app quit unexpectedly message' everytime I try to use iMovie06
Tried moving the imovie.plist to the trash, reinstalled imovie and it still wont open.
I did some researching online and came across this from the apple site:
2) Disable non-essential QuickTime components
1. Navigate to /Library/QuickTime/ for a list of components currently installed.
2. Temporarily disable any components that are not in the list below. You can disable the components by moving them to the Desktop or another folder outside of the /Library/QuickTime/ folder.
3. Open iMovie and see if the issue is resolved. If iMovie no longer unexpectedly quits, check to see if an updated component is available, or contact the developer of the component for further recommendations.
* iMovie: How to troubleshoot "Application Unexpectedly Quit" messages *
**In my folder, along with the AppleIntermediateCodec.component , I have Flip4Mac WMV advanced, import, export components.
I removed them to another folder and tried opening imovie which once again quit unexpectedly.
* I am far from being a tech with macs, so its most likely im overlooking something...
Also, I did purchase MPEG STreamclip from apple for the vids from my camcorder to work.( although it wasnt in the quicktime folder with the components mentioned above)
Apple - Downloads - Video - MPEG Streamclip
But it had been working fine and nothing was changed ..
I can provide the problem report if needed..
Any help or input is GREATLY appreciated. THANK YOU

Cleaning out the system caches may help against problems like your.
I use "Cache Out X", but there are other tools. Be sure to get one for your version of Mac OS X.
http://www.trilateralsystems.com/cacheoutx/
Or more specifically version 4.7.2 for Tiger:
http://www.trilateralsystems.com/downloads/CacheOutX_472.dmg.gz

Data mining is Loading after upgrade from 10.1.0.4 to 10.2.0.4

SQL> select comp_name, version, status from dba_registry;
COMP_NAME
VERSION STATUS
Oracle Ultra Search
10.1.0.4.0 NO SCRIPT
Oracle XML Database
10.2.0.4.0 VALID
Oracle Enterprise Manager
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Oracle Text
10.2.0.4.0 VALID
Oracle interMedia
10.2.0.4.0 VALID
Oracle Expression Filter
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Oracle Workspace Manager
10.2.0.4.3 VALID
Oracle Data Mining
LOADING
Oracle Database Catalog Views
10.2.0.4.0 VALID
COMP_NAME
VERSION STATUS
Oracle Database Packages and Types
10.2.0.4.0 VALID
JServer JAVA Virtual Machine
10.2.0.4.0 VALID
Oracle XDK
10.2.0.4.0 VALID
** How to fix ti..
*** I can find below error in dbua log
===
dbua
Oracle_Server.log 470085 select dbms_java.full_ncomp_enabled from dual;
470086 select dbms_java.full_ncomp_enabled from dual
470087 *
470088 ERROR at line 1:
470089 ORA-29558: JAccelerator (NCOMP) not installed. Refer to Install Guide for
470090 instructions.
470091 ORA-06512: at "SYS.DBMS_JAVA", line 236
470092
470093
470094 Rem If Intermedia, Ultrasearch, Spatial, Data Mining upgrade,
470095 Rem first install JAVAVM if it is not loaded
470096
470097 BEGIN
470098 2 IF dbms_registry.is_loaded('JAVAVM') IS NULL AND
470099 3 (dbms_registry.is_loaded('ORDIM') IS NOT NULL OR
470100 4 dbms_registry.is_loaded('WK') IS NOT NULL OR
470101 5 dbms_registry.is_loaded('SDO') IS NOT NULL OR
470102 6 dbms_registry.is_loaded('EXF') IS NOT NULL OR
470103 7 dbms_registry.is_loaded('ODM') IS NOT NULL) THEN
470104 8 :dbinst_name := dbms_registry_server.JAVAVM_path || 'initjvm.sql';
470105 9 ELSE
470106 10 :dbinst_name := dbms_registry.nothing_script;
470107 11 END IF;
470108 12 END;
470109 13 /
470110
470111 PL/SQL procedure successfully completed.
470112
470113 SELECT :dbinst_name FROM DUAL;
470114
*** Then I can apply 10.2.0.5 PSR ( in data mining is loading)?

You can try de-install and install this component using the following note
Master Note for Oracle Data Mining (Doc ID 1087643.1)

Help! Presentation scaling differently after upgrading from Director 8 to MX 2004

I recently upgraded to Director MX 2004 from Director 8.
Since the year 2000, I've been using Director basically to give
souped up Powerpoint presentations to large groups and it's worked
wonderfully. I haven't even been creating projectors, just opening
the Director document, and releasing on "play" and "full screen" in
the appropriate menus.
When presenting, I'm always hooked up to an LCD projector and
just set the LCD projector as the primary monitor on my Powerbook.
Since Director 8 runs in Classic mode and it's a memory hog and
being phased out, so I sprung for MX 2004. My problem is, when I
follow the same steps outlined above with my old document in MX
2004, the image does not scale the same way. The director document
is sized to 1024x768 and has always fit the LCD projectors screen
perfectly when I set the LCD projector's resolution to match that.
Now, with MX 2004, the dimensions are off. I believe the width
extends off the sides now, as if it's stretched.
Does anyone know what might be accounting for a difference in
how my presentation is being displayed with the only variable being
the newer version of Director? I can still use Director 8 to make
my presentation just fine, but I'd really like to get out of my
Mac's Classic mode (i'm on a PowerBook G4) and make the switch to
MX 2004 for OS X.
Thanks.

Thanks for the reply. No, everything looks fine with all
other applications. I took another look at it and here's the
problem. When I release on Full Screen in Director 8, my 1024x768
document fills the 1024x768 screen perfectly. However, when I
launch it in Director MX 2004 and do the same thing, the screen is
shifted about an inch down. The top band is light blue, which I
believe is a color I chose as a background at one point. It almost
looks as if the Director MX 2004's application menus and toolbars
along the top are being accomodated for, even though they're not
showing in the Full Screen mode. Somehow, everything's being
shifted down. Help!

"Database logon failed" error received after upgrading from CR XI to CR 200

We have a bunch of reports that use ttx files and datasets. The code to support this was written and compiled originally using .NET 2.0 and CR XI. After recompiling using .NET 3.5 and CR 2008 (not the version that came with VS2008), when I run the reports, I now receive an error "Database logon failed". after clicking throught he error, I am prompted to enter a username and password. Just for the heck of it, I entered my database userame and password with no luck. I cancelled out of the login dialog and the frae of the report appeared but no report. No code was changed. How do I fix this?
I know that I should convert the reprots to use xml schema files but I have over 300 reports and this will take time. I need to get this fixed ASAP. After I get this running, I can then [leisurely] fix the reports and use xsd files.

Since the reports were create off of ttx files, they would be expecting a recordset at that time. How are you passing the data to the reports with CR 2008 and VS 2008?
Also, see the following:
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
[1468232 - How to use reports based on multiple TTX files in Visual Studio .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433363338333233333332%7D.do]
And don't forget to search these forums - a fair amount of info in this topic here. The search box in the top right corner of this web page will also give you a number of blogs, KBases, wikis articles and more. E.g.; the search term "ttx net crystal", brought up the above two KBases (along with a number of other content).
Oh. If this is critical, remember you always have the option of creating a phone case;
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Oct 7, 2011 7:04 AM

Crypt acquire context failed with 0x8009000f after upgrade from sms 2003 to SCCM 2007 SP1

I've upgraded clients from SMS 2003 SP3 to SCCM 2007 SP1.
In the SCCM console some ressources are showing as not being client.
If I look on the machine, I can see that client is installed but the client cannot communicate with the management point.
CCMEXEC.log shows the following error message :
Crypt acquire context failed with 0x8009000f.
Failed to create certificate 8009000f CcmExec 21/04/2009 9:49:10 1948 (0x079C)
CCMDoCertificateMaintenance() failed (0x8009000f).
So, the issue is related to certificate
If I go to C:\documents and settings\all users\Application Data\Microsoft\Crypto\RSA\MachineKeys and delete the file begining by 19c5cf... and then restart the client the problem is solved.
Can someone explain what is happening ?
What can I do to prevent this problem
Kind regards

In Server 2008 R2 SP1 (when Pushing Out SCCM 2012 clients)
I just added another account to the security (local Administrators) for the key which starts with 19c5cf...
and restarted the SMS AGENT HOST SERVICE.
Thats also resolved the problem. (NETWORK was the only security account on the key file).

Updating Adobe Community Help files fails every time after starting

Hello,
I e.g. go to «Support Center for Photoshop» from the menu within the app. Adobe Community Help starts up and tells me theres new content, do I want to download that. It seems to start the dl just fine, then reports an error «16882» (if I'm remembering it right).
Why? We have very fast very broadband internet connection and I use a 2011 27" iMac with max Gig RAM installed.
Any hints there would be appreciated.
Thanks!

Thanks, Mister Kapoor,
that solved my problem!
All the best to you, sincerely,
Olaf Mueller
Mit freundlichen Grüssen,
Olaf Müller
COMPLOT AG Multimedia Project, Gerberngasse 44, Postfach, 3000 Bern 13
Tel. ++41 31.313 30 33
Fax ++41 31.313 30 39
[email protected]
http://www.complot.ch
THE ULTIMATE PARTNERS
- RITTER KREATIV
Unternehmensberatung+Kommunikation,
integrales Marketing, Werbung, Promotion, PR
- Complot AG Multimedia Project
Interactive Solutions, Internet, Intranet, E-Business, CD-ROM, DVD, Hosting
- FOTarena
Studio-Pool für Foto, Video, Bildbearbeitung
Am 24.04.2012 um 12:30 schrieb Arpit Kapoor:
Re: Updating Adobe Community Help files fails every time after starting
created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
Seems Adobe Air or Cummunity help has gone cprrupt. Lets follow the below suggestions:
Step 1: Uninstall adobe air from Utilities and re-install the latest adobe AIR from "http://get.adobe.com/air/otherversions/"
Step 2: Follow "http://kb2.adobe.com/cps/842/cpsid_84215.html" and re-install the Community Help Air application.
Step 3: Restart the machine and launch adobe Community Help and try to install all the updates and check if it works fine.
Hope that Helps!.
Arpit
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4356729#4356729
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4356729#4356729. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Please help - CSAuth Fails to load after upgrading from V3.3 to V4.0.1

Similar Messages

Maybe you are looking for