Please help! Disk errors cant be repaired. OSX WONT START!
Hi.
I put in the tiger osx install disc so that i could open disk utiliy and repair my macintosh HD which had errors. It now wont let me repair it and wont start up from macintosh HD. I can only start from disk. I have restored from the install disc to the macintosh HD and had no luck. I have files such as documents and applications on the HD.
What i see when i verify disk is:
error - the underlying task reported failure on exit
Invalid catalog record type
Volume checked fail
HFS Volume Checked
Volume needs repair
When i verify it says that volume cant be repaired.
If anyone has any help please let me know and i will reward points.
Thanks, Ben
disc warrior has been great. I have had to use the computer in firewire disk mode and use my laptop to do all the maintenance on for my desktop. It has rebuilt everything and it all seems fine. The desktop still doesnt start up and i think its because its looking for a disc in the drive which i took out when i thought i didnt need it any more. I need to somehow tell it that i want the startup disc to be macintosh HD not the cd. is there any way of doing this.
Thanks again and i will mark as solved.
Thanks, Ben
Similar Messages
-
I get en error message 42408. I have tried several times to activate my account but the same message keeps reappearing. Please help. I cant even sink my iPad or iPhone. Thanks
After searching, found a few answers and tried one last thing-- allowing Safari to accept Cookies. I never use Safari so never changed any settings in it ever. However, I guess an update along the way turned off cookies in it and that was the blockage. Once I allowed Safari to use cookies I was able to redeem the gift card. SO, glad this board is here for these types of questions!!!!
-
HT3606 please help me to upgrade my mac osx 10.5.8 to mountain lion
please help me to upgrade my mac osx 10.5.8 to mountain lion. i am not able to do it.becoz i am not having app store.
Before you buy anything, first make sure your Mac is compatible.
Minimum specs for Snow Leopard. Mac OS X v10.6 Snow Leopard - Read the Technical Specifications
Note. You can no longer buy Snow Leopard from an Apple retail store, only as follows.
If you are in North America ... Last I read, you must call them (1-800-MY-APPLE). It is $29 plus tax for family pack and $19 plus tax for the individual use version.
In Europe or otherwise … call your National Apple Helpline … http://support.apple.com/kb/HE57
Once you have bought and upgraded you will need to apply the Combo updater for Snow Leopard. Mac OS X 10.6.8 Update Combo v1.1
For Mountain Lion the minimum specs are … technical specifications.
But if your computer meets those specs you can upgrade to Mountain Lion without any intermediate steps. -
Please Help - "page error" / a system error occurred
I am very basic with Coldfusion Developed websites and pretty awesome on HTML and PHP. While working on a website I made an HTML change and added a line to a page. All works well on the test website/server but after uploading the changed page the page went offline/errored a day later.
I have an error receipt and am hoping to resolve this issue with some insight from a good Coldfusion Developer or Programmer.
PLEASE HELP, see error below.
A system error occurred: http://www.mix.co.zm/mix_schools.cfm?
Error - struct
Detail Note: If you wish to use an absolute template path (for example, template="/mypath/index.cfm") with CFINCLUDE, you must create a mapping for the path using the ColdFusion Administrator. Or, you can use per-application settings to specify mappings specific to this application by specifying a mappings struct to THIS.mappings in Application.cfc. <br> Using relative paths (for example, template="index.cfm" or template="../index.cfm") does not require the creation of any special mappings. It is therefore recommended that you use relative paths with CFINCLUDE whenever possible.
Message Could not find the included template components/mix_documents2.cfm.
MissingFileName components/mix_documents2.cfm
StackTrace coldfusion.tagext.lang.IncludeTag$NoSuchIncludeTemplateException: Could not find the included template components/mix_documents2.cfm. at coldfusion.tagext.lang.IncludeTag.setTemplate(IncludeTag.java:349) at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416) at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:360) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48) at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40) at coldfusion.filter.PathFilter.invoke(PathFilter.java:94) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62) at coldfusion.CfmServlet.service(CfmServlet.java:200) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at com.intergral.fusionreactor.filter.FusionReactorFilter.i(FusionReactorFilter.java:566) at com.intergral.fusionreactor.filter.FusionReactorFilter.c(FusionReactorFilter.java:258) at com.intergral.fusionreactor.filter.FusionReactorFilter.doFilter(FusionReactorFilter.java: 164) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 ) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
TagContext Error - array
1 Error - struct
COLUMN 0
ID CFINCLUDE
LINE 15
RAW_TRACE at cfmix_schools2ecfm527774291.runPage(D:\hshome\mixnet\mix.co.zm\mix_schools.cfm:15)
TEMPLATE D:\hshome\mixnet\mix.co.zm\mix_schools.cfm
TYPE CFML
TagName CFINCLUDE
Type MissingIncludeWith LR closed move the preferences file to the Trash as described at the below link. You will lose your Preferences settings, so you may want to record them if unsure what you have changed from the default settings.
http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom
DO NOT RESTART LR!
Next uninstall LR and then completely shutdown your system and turn the power OFF. Your catlog(s) will not be removed, so no worries.
Restart your system and reinstall LR using the latest version download available (LR5.4, LR4.4).
What version of LR and OS X are you using? -
hi guys urgent please help me ASAP my ipod touch 4g reboots/restarts over and over again and i cant enter DFU mode cause my home button is stuck/broken please help guys i cant enter itunes too cause it said it needs my passcode the problem is i cant even enter my passcode in my ipod touch cause its rebooting over and over again help please guys
- See if this program will place it in recovery mode since that erases the iPod and bypasses the passocode.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- Next try letting the battery fully drain. The try again. -
HT201363 please help me i cant rembar my security question
please help me i cant rembar my security question
send me on email:
[email protected]Kappy's Some Solutions for Resetting Forgotten Security Questions
(only solutions) -
hello apple.help me network iphone 4 use ios7.12 error network.acoount icloud.apple please help support errors no service network.thank you
<Personal Information Edited by Host>tran ngoc nhan,
Viết bằng tiếng mẹ đẻ của bạn?
Tôi đoán Việt Nam?
Chúng tôi có thể dịch!
Nói cho tất cả vấn đề của bạn!
Cung cấp cho nhiều chi tiết!
Nếu không Việt Nam, dịch này ở đây!
https://translate.google.com/
Write in your native language?
I guess Vietnamese?
We can translate!
Tell all your problem!
Give much detail!
If not Vietnamese, translate this here!
https://translate.google.com/
CCC -
Hi can someone please help, my imac crashed, when i try to start it up, it just beeps loudly 3 times, then there is a pause before it beeps 3 more times, this just continues to happen, any sugestions? please help
allanpar wrote:
i am having to use my laptop to post this question, missing my imac so much, its just not the same using this slow windows laptop.
Then maybe it's time to buy a new Windows notebook.
The RAM has either gone bad or somehow become unseated. Also there is the chance that the RAM slots have failed. -
HELP!!! My powerbook g4 wont start up.
HELP!!! My powerbook g4 wont start up. when i press the start button, i hear the start up chime, the screen turn grey with the apple log on it, then the wheel rotates like 3 times and stops but the main screen doesnt come up. sometimes the wheel just rotates continously and nothing happens@
Boot your computer using the install disk (hold the C button while turning on the computer, with the install disk inside). Open Disk Utility and repair the disk and disk permissions.
-
My start up disk is full and my mac wont start
Hi My start up disk is full and my computer wont start how do I get the system to reboot again?
Ensure that the external is correctly formatted
Drag and dropped the files
Test to be sure that the moved files work
Once the moved files work delete the originals
Allan -
please help me i can open itunes because i get the error message above!!
hold down ALT + H click on check for updates, then update itunes, after that it will work.
-
Please help! Error -48 can't sync, tried everything!!
Hi
as above really, I have had my ipod 20gb clickwheel nearly 4 years and no problems, all of a sudden itunes has come up with this error message. I cannot take off or put songs onto the ipod, or move them around in playlists etc, but when not connected to my pc the ipod itself works fine.
Please help, I have tried most things such as unistalling itunes, error-checking the disk in my computer etc.
Has anyone got any other suggestions? I don't really want to restore the ipod as some of my music is not backed up, I manage it manually it that helps??Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install. -
ive got a bb pearl 9105 and everytime i turn it on its come up with error messages then comes up with a white screen that says error 523. i cant plug it into my comp as the charge port is broken and cant get rid of the error messages to activate the bluetooth.
anyone could any ideas?? ive tried reseting it, taking battery, sim,memory card out and nothings doing the trick...please help...Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB24395 "Error 523", "App Error 523", or "JVM 523" appears on the BlackBerry smartphone
Unfortunately, the actual remedy may well require connection to your computer...but with the port broken, that won't be possible. So you won't be able to fix this without seeking formal hardware-level support.
If you remain in warranty, you should seek out support via that channel. If you have no warranty, then you would seek out a local (to you) shop with qualified BB hardware technicians who can give you a proper diagnosis and estimate.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I have tried EVERYTHING!
"media browser"
"export movie"
"export using QuickTime"
"share to iDVD"
"share to media browser"
But always:
The project could not be prepared for publishing because an error occured. (-50)
My film:
lasts for 06:51 mins
music is mp3
I have deleted many videos to get space for my film, so that doesn't seem to be the problem. PLEASE HELP ME, I'm dying here!
BTW: I have a Mac OS X version 10.06.08 and imovie´ 11 9.0.4Hi
Error -50
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
I convert all audio to .aiff 48kHz or from Audio-CD 44.1kHz (still .aiff)
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W -
Please Help! ERROR: Application Server failed. when Refreshing
Please help on this below issue. Thanks.
We have a requirement that using ASP.NET (C#), we need to open saved .rpt file (saved with data and the rpt file is assigned to the web page as query string) and let the users refresh themselves with latest data by clicking at refresh icon of the CrystalReportViewer. But it throws 'The Report Application Server failed' error message. What could cause this message. below is the piece of code we are using to configure the report.
private void ConfigureCrystalReports()
string reportPath = Server.MapPath("Reports
SEMS0001_UBS.rpt");
this.CrystalReportSource2.ReportDocument.Load(reportPath);
CrystalReportViewer1.Visible = false;
SetDBLogonForReport(this.CrystalReportSource2.ReportDocument);
int i = 0;
foreach (ParameterField field in this.CrystalReportSource2.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
//this.CrystalReportSource2.ReportDocument.Refresh();
CrystalReportViewer1.ParameterFieldInfo = this.CrystalReportSource2.ReportDocument.ParameterFields;
CrystalReportViewer1.Visible = true;
public void SetDBLogonForReport(ReportDocument reportDocument)
Tables tables = reportDocument.Database.Tables;
connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
//foreach (CrystalDecisions.Shared.IConnectionInfo connection in reportDocument.DataSourceConnections)
// connection.SetConnection(ConfigurationManager.AppSettings["DBServer"], "", ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
// connection.SetLogon(ConfigurationManager.AppSettings["DBUser"], ConfigurationManager.AppSettings["DBPassword"]);
foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogonInfo);
//reportDocument.Database.Tables[0].ApplyLogOnInfo(tableLogonInfo);Attaching full code ... Our case is the RPT files are stored wih default parameters and saved data. We need to let users just refresh the rpt files with latest db data and overwrite with the same rpt files. But this code keep showing The application server failed mesg. when the refresh icon of viewer is clicked.
Attaching the code as it is not properly attached in my previous reply ...
=======================
Begin - aspx.cs code
=======================
using System;
using System.Data;
using System.Data.OleDb;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.CrystalReports;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
public partial class _Default : System.Web.UI.Page
private ConnectionInfo connectionInfo = new ConnectionInfo();
protected void Page_Load(object sender, EventArgs e)
if (!IsPostBack)
//ConfigureCrystalReports();
protected void CrystalReportViewer1_Init(object sender, EventArgs e)
ConfigureCrystalReports();
private void ConfigureCrystalReports()
string reportPath = Server.MapPath(@"Reports\Report1.rpt");
this.CrystalReportSource1.ReportDocument.Load(reportPath);
CrystalReportViewer1.Visible = false;
SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
//this.CrystalReportSource1.ReportDocument.Refresh();
CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
CrystalReportViewer1.Visible = true;
public void ReportDocument_RefreshReport(object sender, EventArgs e)
try
SetDBLogonForReport(this.CrystalReportSource1.ReportDocument);
CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
this.CrystalReportSource1.ReportDocument.SetDatabaseLogon("user", "passwd", "server", "");
foreach (ParameterField field in this.CrystalReportSource1.ReportDocument.ParameterFields)
field.HasCurrentValue = true;
field.AllowCustomValues = true;
//field.EnableNullValue = true;
this.CrystalReportSource1.ReportDocument.Refresh();
this.CrystalReportSource1.ReportDocument.SaveAs(@"C:\Inetpub\wwwroot\XsiteRpt\Reports\Report1.RPT", true);
catch (Exception ex)
Msg.Text = ex.Message;
public void SetDBLogonForReport(ReportDocument reportDocument)
Tables tables = reportDocument.Database.Tables;
connectionInfo.ServerName = "server"; //ConfigurationManager.AppSettings["DBServer"];
connectionInfo.UserID = "user"; //ConfigurationManager.AppSettings["DBUser"];
connectionInfo.Password = "passwd"; //XsiteWinRpt.ConnUtil.GetOnlyPasswordOfConnString(); //ConfigurationManager.AppSettings["DBPassword"];
foreach (CrystalDecisions.CrystalReports.Engine.Table table in reportDocument tables)
TableLogOnInfo tableLogonInfo = table.LogOnInfo;
tableLogonInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogonInfo);
=======================
End - aspx.cs.code
=======================
=======================
Begin - Assemblies
=======================
<assemblies>
<add assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Framework, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/><add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
</assemblies>
=======================
End - Assemblies
=======================
=======================
Begin - aspx
=======================
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Xsite.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=10.2.3600.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Refresh Report</title>
<link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
rel="stylesheet" type="text/css" />
<link href="/aspnet_client/System_Web/2_0_50727/CrystalReportWebFormViewer3/css/default.css"
rel="stylesheet" type="text/css" />
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:Panel ID="PanelMsg" runat="server">
<br />
<asp:Label ID="Msg" runat="server" Font-Bold="False" Font-Names="Verdana" ForeColor="Navy"></asp:Label>
<br />
</asp:Panel>
<asp:Panel ID="PanelViewer" runat="server">
<CR:CrystalReportViewer ID="CrystalReportViewer1" OnReportRefresh="ReportDocument_RefreshReport" runat="server" AutoDataBind="True"
EnableDatabaseLogonPrompt="False" EnableParameterPrompt="False" ReuseParameterValuesOnRefresh="True" HasRefreshButton="True" Height="820px" OnInit="CrystalReportViewer1_Init" ReportSourceID="CrystalReportSource1" ShowAllPageIds="True" Width="1215px" />
<CR:CrystalReportSource ID="CrystalReportSource1" runat="server">
</CR:CrystalReportSource>
</asp:Panel>
</div>
</form>
</body>
</html>
=======================
End - aspx
=======================
Maybe you are looking for
-
My computer crashed and i lost all my music in my library
hello, can someone, anyone help me? my computer crashed and i have lost all my data. i have spent the past 48 hours putting my life back together on the computer. i have windows xp. one of the programs i lost was all my songs on my itunes. can i impo
-
I moved during the summer. I changed to highspeedand & when I set my computer up it told me that my email address was already in use so I had to change it(????) I changed from jkady to [email protected] I tried to change it on firefox but it would no
-
I am trying to complete an interactive PDF for an insurance company. The form has several dates that need to be completed, like my DOB, date of training and date of current medical certificate. If I enter data in one of the date fields, it automati
-
Photoshop 5.5 crashes every time I attempt to save.
Photoshop 5.5 crashes everytime I attempt to save.
-
Network Prefs not appearing...
3 Year old Macbook Pro Core 2 Duo. When I open my system preferences I can click on every preference pane and have it open except the Network Pane. When I click on it, it stays on the main panel and shows at the top that it goes to network prefs but