Please help! DVD works, except the slides are smaller.

Hi-
I've been working on a project for quite some time and am in the final stages. I went to do a proof of the DVD and have found that the slides I have inserted are not the full screen size. How do I make adjustments? I've been working with Photoshop, Final Cut Express and iDVD. The videos and menus look good but the slides aren't right.
Please help! I'd be forever greatful.
-Joshi
Ibook G4 Mac OS X (10.4.8) 512 MB + 400GB External Hard Drive

A few Helpful links:
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html
http://homepage.mac.com/profpixel/iDVD_6size.html
http://www.apple.com/ilife/tutorials/idvd/id2-3.html
http://www.kenstone.net/fcphomepage/idvd_6stone.html

Similar Messages

During presentations, Keynote slides are small. If exported to ppt, some photos are missing.

During slideshow presentations, if I use Keynote the slides are small. If Keynote is exported to ppt, numerous photos, slides are missing. Can i embed photos in Keynote - would that resolve when exporting?

I haven't seen this, but I don't do a lot of video exporting. My first guess would be that the files may be larger than the prior files... attempting to play at a higher bitrate and the PC is choking on them. Can you compare against a prior exported .mp4 file to determine if the bit rate is any different? Also, make sure that VLC hasn't been updated either.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

HT4972 I am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

am using iphone 3g and it is having currently IOS 4.1 version,till what IOS version can i upgrade ? please help me many of my apps are not working esp whatsapp.

iOS 4.2.1 is the latest version of iOS for the 3G.
Facebook and Whatsapp both require 4.3 or higher.
If you want to use those apps, either use the old version that should be in your iTunes library or upgrade the hardware to a 3GS or newer device.

Just got a used iPhone 4, loaded SIM card for straight talk. Everything works except the iTunes and apps. Can anyone help me?

Just got a used iPhone 4, loaded SIM card for straight talk. Everything works except the iTunes and apps. Can anyone help me?

Very vague.
In what way do itunes and apps not work?
Please explain

HT1338 evr since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this can someone please help me work this out

ever since i put a child lock on my Mac its never been the same .. now i cant even open my yahoo mail without it wanting me to reinstall this, can someone please help me work this out

What "child lock" are you talking about?
Do you mean you set up a Managed account (Parental Controls), or some other software?
For Parental Controls, select the account in Users & Groups and uncheck the "Enable parental controls" checkbox.

Please help me to find the table for fields where the descriptions are give

please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicator

You could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav.

Good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

I just completed a keynote presentation, but it will not "play"...I just get a blank slide (probably the final slide) when I hit the play button, even though I can see all the slides are in the list and will open as I click on them. HELP!

I just completed a keynote presentation but it will not "Play". I can see the slides are in place, but all that comes to the screen when I hit the play arrow is the last, blank, slide. HELP!

At the risk of stating the obvious, is your first slide highlighted before you hit play? You mentioned the last blank slide shows up which could mean you have that last slide highlighted. If the last slide is highlighted and you hit play then that is the slide that will show up and if it's your last slide that is all you will see.
Make sense?

Suddenly on sunday while i was working, my macbook Air stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center could you please help me in rectifying the problem. Would th

Suddenly on Sunday while i was working, my macbook Air which i bought last year in Spetember from Arkansas, Little Rock stopped working, right after that i tried getting it on but nothing came other than a grey screen with a question mark right in the center. Could someone please help me in rectifying the problem. Would thi issue also affect saved data. However, I have handed the notebook to Apple for reapirs and they will revert by Thursday 12/04/2012.

I just received some horrifying news from Adobe about my production suite. I just FINALLY learned today that what I've been trying to do for over a week now - CAN'T be done because of compatability issues involving updates of both Adobe & Microsucks Winders!!! I sincerely hope this is not your problem. Mine is ALMOST HOPELESS!! Being in this HOPELESS Obamma economy,,,, leaves NO STIMULUS in which to currently upgrade everything that needs upgraded for me to fully use my INVESTMENT in Adobe Suite - sad, horrible and SICKENING!!!
I just wanted to post this. And again, I truly hope you find a solution. Good Luck!

When I go to get add-ons (7.0.1), nothing shows up, except the "what are add-ons" info bubble. How do I make this work?.

When I go to get add-ons (7.0.1), nothing shows up, except the "what are add-ons" info bubble. How do I make this work?. The rest of the functions in that section seem to work. And I can search MY add-ons, but not Available Add-ons.

Click on Extensions on the left-side.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Please help me in resolving the URL with parameters.

Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted��.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
Usha

We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim

Please help me to correct the script

I try to write a script by my slef, but not work
app.findGrepPreferencest = firstLineIndent:8, leftIndent:8;
app.changeGrepPreferences = firstLineIndent:8, leftIndent:16;
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
Can someone please help me to correct the script, please.

both two script are working
but waht if I change the script into this format?
function(){
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.selection[0].changeGrep();
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.selection[0].changeGrep();
and then so on,
Can it works?

Please help! DVD works, except the slides are smaller.

Similar Messages

Maybe you are looking for