PLEASE HELP!!! Error - 36 when copying from powerbook to iMac/Lacie HDs

I'm working on a film and have captured to my powerbook G4 in FCP. I am now trying to transfer my scratch disk to either my iMac (intel 2.4GHz) or my Lacie HD extreme 500 GB / Lacie 250 GB.
When I drag the folder over, it starts copying and then at some point (normally about half way through) it says:
"The Finder cannot complete the operation because some data in shot 9 could not be read or written (error cose -36)"
It does this for a number of different files in the folder. I have tried copying them one by one, and a few will copy then I'll get to a file and the same error will occur. The files on the powerbook are intact and open and play as expected. I have tried using my powerbook in TD mode with iMac and linking to both Lacie drives with FW400, FW800 and USB.
I haven't tried copying over my network yet but am reluctant to do this as firstly there is over 30GB of material and secondly I worry about the accuracy of a copy over wifi.
I recently had my logic board replaced on powerbook and have done an erase and install of OSX Leopard and am running 10.5.6 on both machines.
I found very little on these boards about error 36 and so would massively appreciate any help on this - this is my first really important scary project and I have a looming deadline!!!
Cheers

You should use Disk Utility to verify both the source and destination disks. Post the error messages here if you see any.
How is the LaCie formatted? It really should be Mac OS Extended. FAT formatted disks have file size limitations which can cause all kind of problems.

Similar Messages

PLEASE HELP!!! Error -36 when copying from powerbook to iMac/Lacie HD

I'm working on a film and have captured to my powerbook G4 in FCP. I am now trying to transfer my scratch disk to either my iMac (intel 2.4GHz) or my Lacie HD extreme 500 GB / Lacie 250 GB.
When I drag the folder over, it starts copying and then at some point (normally about half way through) it says:
"The Finder cannot complete the operation because some data in shot 9 could not be read or written (error cose -36)"
It does this for a number of different files in the folder. I have tried copying them one by one, and a few will copy then I'll get to a file and the same error will occur. The files on the powerbook are intact and open and play as expected. I have tried using my powerbook in TD mode with iMac and linking to both Lacie drives with FW400, FW800 and USB.
I haven't tried copying over my network yet but am reluctant to do this as firstly there is over 30GB of material and secondly I worry about the accuracy of a copy over wifi.
I recently had my logic board replaced on powerbook and have done an erase and install of OSX Leopard and am running 10.5.6 on both machines.
I found very little on these boards about error 36 and so would massively appreciate any help on this - this is my first really important scary project and I have a looming deadline!!!
Cheers

Joey,
A -36 error is an I/O error. My first though would be a bad cable, but you have apparently tried several of these, over several different busses (the buss could also be a culprit). That leaves a potential disk error.
OK, so you captured this footage on the Powerbook. You did this post-format/reinstall, right? You captured this to the Powerbook's internal drive, right? DV footage (or worse, HD footage) uses huge amounts of disk space. How much? How close to completely full is this internal hard drive? If you allowed the available space to approach zero, especially when running something like FCP, this may have caused the disk error.
Assuming you still have some space left on the Powerbook's internal drive, are you able to make an internal copy of one of these "troublesome" files using just the Powerbook in isolation? If not, and where you cannot, you have a corrupted file. Corrupted by a disk error. Yes, you may be able to access them just fine, and they may actually play within FCP, but they are incomplete in some way; they are missing some bytes, Kbytes, or Mbytes. If you find this to be the case, you might consider that you need to re-capture.
If they can be copied internally, there is probably something else going on here. If they can be copied internally, you should be able to copy them to some external media.
Scott

Error message when copying from Acrobat Reader

Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent).
Copy works, but causes a needless and useless error message that has to be clicked away every time.
This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
When can I expect a solution?

"101 Views 0 Replies
Was this helpful?"
Of course not.
But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
It can be that easy.

Please help error -9808 when downloading apps in itunes store anyone can help me out

please help error -9808 when downloading apps in itunes store anyone can help me out

Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808

HP OfficeJet J4680 All-in-One getting Copy error message when copying from front panel.

I get this message when I try to copy from the front panel: Incorrect paper size. Load different media or change copy paper size settings. It does not matter what I am trying to copy. I have checked the paper size and media and they are set on what I want -- Letter size and plain paper. It started after I cleared a paper jam from the back of the copier. Hope someone can help me. Thanks Klb

I am also having the exact same problem. I tried resetting it back to default settings (power on, unplug power cord, hold the # and 3 buttons while plugging back up). However, this has not helped. So far the only solution I saw is to upgrade to another printer, but copying seems to be such a simple function for this problem to be so hard so solve. Unfortunately, I've seen no other answers, so upgrading may be my only option even though I have no other problems :-(

Please Help - Error message when trying to open itunes

Hi
Can someone help pls? I was in the middle of upgrading my version of itunes and my computer crashed. Now when I try to open itunes I get an error message as follows: 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience'.
I don't know what to do! I am worried I have lost all of my music!?

hiya!
'Quick time failed to initialize. Error # - 2095. Please make sure QuickTime is properly installed on this computer'.
okay, let's try a careful standalone QT reinstall:
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Copy error -36 when copying from Time Machine disk to Mac

Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?

Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue?

Error message when copying from Itunes to 3rd gen. Ipod

The message says "Attempting to copy to the disk My Ipod failed. An unknown error occurred. (-69) What does this mean and what do I do about it? Ive restored my Ipod several times, am running the appropriate updated copy of everything. Help!!!

This is the main iTunes support page
http://www.apple.com/support/itunes/index.html
And this is the main iPod support page
http://www.apple.com/support/ipod/
There is a search box over on the right to use.

Please help. black screen when copying back to tape

I would be very grateful of any help. I am trying to copy a movie back to tape however when i do so it results in the recording on the tape being completly black. it has gone through the process but just left a black screen.
very desperate.
Thanks

... and it did work before...? not all European camcorders allow a DV-IN...
cable checked?
finally: iM handle both video standards, even allows to import PAL footage into a NTSC project.. but cameras are 'hardwired' to one standard.. make sure, your project has same standard as camera.. (besides: Apple lingo is a little 'cryptical': '25 frames per second' = PAL, '30fps' = NTSC)
it could have happen, that you incidently created a NTSC project with your PAL footage. and now, it is impossible to playout THAT into/onto (english??) tape ...

PLEASE HELP---Music and Photos copied from PC are LOCKED

I copied all my photos and music from PC to USB drive then to MAC and they work fine, however, when i try to delete the desktop.ini files since mac doesnt need those and other songs or whatever I want to get rid of it wont delete because several of the folders or subfolders are locked.
To delete it I can select get info on each folder then UNCHECK Locked and it will let me delete, but how can I copy all this over or turn off the locked feature on everything at once since going through hundreds and hundreds of music folders and subfolders to click get info then uncheck locked is nearly impossible.
Thanks in advance.........
Patrick

Hi,
Open Terminal (Applications/Utilities), type this command and leave a space afterwards then having selected all the files you want to unlock, drag and drop them into the Terminal window and press return:
chflags nouchg

Please help - error message when installing iTunes 10

I have tried several times to install iTunes to my laptop. Every time, I get an error message that reads: "The installer encountered errors before iTunes could be configured. Your system has not been modified. To retry these operations at a later time, please run the installer again."
I tried deleting the temp file and uninstalled all Apple components and still get the same error message.

Perhaps let's check to see if at least some of the iTunes components install.
Try installing QuickTime "on it's own". (Actually, this'll install a fair few of the other related itunes programs too, but not all of them.) Get the installer that doesn't mention itunes:
http://www.apple.com/quicktime/download/
Does that install for you? If not, what error message do you get on the QuickTime install?

Error message when copying a music file from PC to BB

I get the following error message when copying a music file. Also I cannot delete any files.
"Cannot copy. The request could not be performed because of an I/O device error."

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error message when changing from portrait to landscape when printing

I receive an error message when changing from portrait to landscape when trying to print. How do I resolve this issue?

Hi hillclimbing,
Can you please let me know the exact error message you see as that would be helpful.
Does this occur with all the pdf files.
What OS and Acrobat version are you using?
Regards,
Rave

LTR - Error occurred when selecting from database

Hi,
We created couple of configurations using LTRC in our SLT systems. When i try to check these in transaction LTR, they are not displayed, just getting the error - Error occurred when selecting from database (Attached screenshot). All the required SICF for SLT has already been activated. Any suggestions how to fix this issue?
Thanks,
Saravanan

Hi Experts,
Did anybody get the solution of this error ,if yes please reply?
I am getting below error when I am refreshing the current config or creating a new one in LTR
" Error occurred when selecting from database"
Thanks for your help,
Balwant

Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

Everytime i eject my ipod and reconnect it all my music is gone. and sometimes while i try adding music to it. itunes completely freezes. please help. and sometimes when i plug it back into my PC i have to rename my ipod and such

Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your Ipod to the PC
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well, since you got such a huge library.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
If this doesn't resolve your problem, then let me know.
Good Luck!

PLEASE HELP!!! Error - 36 when copying from powerbook to iMac/Lacie HDs

Similar Messages

Maybe you are looking for