Please help! Error -48 can't sync, tried everything!!
Hi
as above really, I have had my ipod 20gb clickwheel nearly 4 years and no problems, all of a sudden itunes has come up with this error message. I cannot take off or put songs onto the ipod, or move them around in playlists etc, but when not connected to my pc the ipod itself works fine.
Please help, I have tried most things such as unistalling itunes, error-checking the disk in my computer etc.
Has anyone got any other suggestions? I don't really want to restore the ipod as some of my music is not backed up, I manage it manually it that helps??
Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.
Similar Messages
-
When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
PLEASE PLEASE HELP ERROR 4261 CAN'T BRUN CD'S
SOMEONE PLEASE HELP ME I CAN 'T BURN ANY CD'S AFTER INSTALLINF 7.02 ITUNES. I WILL BEGIN TO BURN, IT PROCEEDS TO "CHECKING PLAYLIST" THEN "WRITING SONG" THE CANCELS BURN!!!! I HAVE GONE THRU A WHOLE PACK OF CD'S. oNE ERROR MESSAGE SAID THAT THE CD HAD TO BE CALIBRATED BUT I DON'T KNOW WHAT THAT MEANS?! PLEASE HELP!!!!!!
I have this problem as well. I can burn CDs at the highest speed using both media player and Sonic. I have:
1. repaired, uninstalled and reinstalled itunes
2. uninstalled and reinstalled my CD burner and IDE channels in device manager
3. disabled my anti-virus software
4. Updated my burner drivers and intel chipset drivers to the latest version
5. turned off the DLA on the burner properties
6. disconnected from the internet
7. selected the slowest burn speed in itunes
8. tried 2 different CD brands (memorex and maxell)
9. uninstalled some misc junk software that was on my pc, just in case it was causing the problem.
It will setup the cd by burning all the track labels, but stops usually partway through the first song, sometimes it does make it to the second song.
Any help would be appreciated quite a bit. Seems like a common error, but with few solutions.
Here is the diag data from itunes:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dell DE051
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: Intel(R) 82865G Graphics Controller\Intel(R) 82865G Graphics Controller
IDE\DiskWDCWD1600JB-75GVC0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVD+-RW_GWA4164B_______________E113___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST DVD+-RW GWA4164B, Rev E113
Audio CD in drive.
Found 7 songs on CD, playing time 19:00 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:55:61
Track 3, start time 06:46:15
Track 4, start time 09:39:39
Track 5, start time 12:20:45
Track 6, start time 14:40:72
Track 7, start time 16:45:18
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
Dell Windows XP -
PLEASE HELP!! CAN'T SYNC WITH OUTLOOK...AND ITS NOT THE 64 BIT VERSION
PLEASE HELP ME!!
I have a BB Storm2 9550. I had a laptop with Outlook 2007/Windows Vista/BB Desktop 5 and it synced fine.
I now have a new laptop with Outlook 2010/Windows 7/ BB Desktop 6 and each time I try to configure the Organizer Data to select 'Outlook' for Calendar, Memo, Tasks, and Contacts and select NEXT I receive an error in Intellisync that says 'The Operation Terminated Unexpectedly'.
I have tried completely uninstalling BB Desktop manager from the Application Data folders and registry, reinstalling 6.0, downgrading to 5.0 (which gives me a Microsoft Connector Error).
I have also tried reinstalling Outlook. I read all of the posts concerning Outlook 2010 64bit but I am running the 34bit version.
Please help me. Right now I don't have any contacts on my BlackBerry and I am so frustrated. I have tried to fix this for over a week now and all the posts I read don't seem to resolve my issue or I don't understand them.
I'll even take suggestions for other ways to sync my data besides outlook (although that is not my preference)
Thank you
Solved!
Go to Solution.Log in to an account that has administrator privileges.
Open a command prompt.
Type cd C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector.
Type regsvr32 MsOutlookConnector.fil and press Enter.
Note: For BlackBerry Desktop Manager 6.0, please use the following path:
C:\Program Files\Research In Motion\BlackBerry Desktop\IntelliSync\Connectors\MS Outlook Connector
Note: The following error message might be displayed when step 3 has been completed:
The module msoutlookconnector.fil was loaded, but the call to DLLRegisterServer failed with error code 0x80070005
If this happens, turn off the User Accounts Control (UAC) and register the MsOutlookConnector.fil file again.
To turn off the UAC in Windows Vista, complete the following steps:
Go to Start > Settings > Control Panel.
Under User Accounts and Family settings, click Add or remove user account.
Select one of the user accounts or the guest account.
Under the account, click Go to the main User Account.
Under Make changes to your user account, click the Change security settings link.
Under Turn on User Account Control (UAC) to make your computer more secure, clear Use User Account Control (UAC) to help protect your computer and turn off the UAC.
Click OK.
Restart the computer.
Give this a try it could be that the connector to ms outlook never registered properly. -
This started a few days ago, when I noticed skype would not open and keeps quitting unexpectingly. Now it's all of my microsoft office programs. I have read horrible things on the internet about creeps building some sort of 'backdoor' through Mircosoft Word and are now able to access my macbook. I want to feel safe again and I want to be able to use skype again. I think I will delete Microsoft office until I find/can afford a better version.
I have tried deleting and re-installing the programs, PRAM-ing my mac, doing the utilities organizing thing, and I downloaded 4 different scanners (Cleanmymac, VirusBarrier Express, Bitdefender Virus Scanner, and ClamXav) to help get rid of this and only one scanner found a small file that was harmful. I need some advice PLEASE!
Thank you for your time!Elliottarian wrote:
Thanks MadMac0 I followed the instructions in Terminal for the link you sent and all my programs open again!
Sorry I'm just getting to this now, but a lot going on today in this front. There is now a "K" version of Flashback and perhaps more going on.
A couple of considerations you need to be aware of.
It's clear from the results of your testing that the reason you were infected is because your Java is out of date, so it's important that you keep all your software up-to-date going forward.
But even that won't protect you from this new "K" version as Apple has not released the patch to it yet, so I encourage you to disable Java in all your browsers and consider doing so for everything by opening Java Preferences (located in /Applications/Utilities/) and unchecking the box next to "J2SE 6.0" and any other box that might be checked. If you find that some application(s) you need must use Java, then you should enable it only to run that application(s).
We cannot be certain that what you did totally killed the Trojan, so your best bet would be to restore your Mac back to where it was before you were infected using TimeMachine. If you don't have a TimeMachine backup or cannot determine the date of infection, then your safest solution is this one:
Courtesy of Linc Davis:
I suggest you take the following steps immediately:
1. Back up all data to at least two different devices, if you haven't already done so.
2. Boot from your recovery partition (if running Mac OS X 10.7 or later) or your installation disc (if running an earlier version of the Mac OS), launch Disk Utility, and erase the startup drive. This action will destroy all data on the drive, so you must be sure of your backups.
3. Install the Mac OS.
4. Reboot and go through the initial setup process to create an account. Don’t import anything from your backups at this stage.
5. If running Mac OS X 10.6.x or earlier, run Software Update.
6. Restore the contents of all the top-level subfolders of your home folder except “Library” from the most recent backup. You can also restore the files in the Library folder, but don’t restore any of its subfolders; only the files contained in those folders, and only if they’re visible in the Finder. Don’t restore any hidden files or folders, no matter where they are.
7. If you’re running Mac OS X 10.5.x or earlier, disable Java in Safari’s preferences, and leave it disabled until you upgrade to Mac OS X 10.6.8 or later, including all available updates. The Java web plugin is unsafe to use under older versions of the Mac OS. Note: I’m not referring to JavaScript, which is unrelated to Java, despite the similarity in the names.
8. Change every Internet password you have, starting with banking passwords. Check all financial accounts for unauthorized transactions. Take this step only after you’ve secured your system in the preceding steps, not before.
9. Reinstall your third-party software from fresh downloads or original media, not from backups which may be contaminated. If you use any third-party web browsers under Mac OS X 10.5.x or earlier, disable Java in their preferences, as you did with Safari in step 7.
Of course, as of this morning you should follow my instructions for disabling Java and ignore his, at least until Apple gets that Java patch out.
Pay particular attention to Step 8 no matter what you decide to do. -
Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen
Just restore your bootable backup/clone or Time Machine backup.
-
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
thank you!Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086
-
i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?
From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state. -
Help please:How do I solve "Unknown Error -53 Can't Sync (My) Ipod"
my Laptop was stolen.. it had my iTunes on it.. I have another computer so I down load iTunes but it does not seem to want to recognise my iPod saying "Unknown error -53 Can't Sync (My) iPod. Help appreciated. Friendly shake hands. R
Thank you, but I did that. I de-selected and then re-selected but because the 13019 still won't allow the sync, all it did was completely delete everything on my Ipod! I now have no songs on my Ipod when at least before, I had all my songs but the new 12 songs! I'm freaking!
-
Please Please help me. I have been trying to install Itunes 11 for 3 months. I deleted my old version and can not for the life of me get Itunes installed . I have Windows 7 Home. The message is " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BDOAF1
Try the following user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows -
Please help error -9808 when downloading apps in itunes store anyone can help me out
please help error -9808 when downloading apps in itunes store anyone can help me out
Click here > iTunes: Advanced iTunes Store troubleshooting
Then "expand" Specific Conditions and Alert Messages
Then click 9808 -
When attempting to convert pdf to word doc, I continually get "An error occurred while signing in" despite the fact that I'm already signed in. Please help if you can?
Hi lorrelaws,
Do you receive that error when you try to sign in via Reader? If so, try signing in via the web interface. Did that do the trick?
Let us know how it goes.
Best,
Sara -
HI THERE,
CAN SOMEONE PLEASE HELP ME? I HAVE BEEN TRYING TO RESTORE MY IPHONE4 FROM IOS 4.3.3 TO 5.1.1 FOR THE LAST 6 HOURS AND EVERYTHING GOES THROUGH OK UNTIL IT GETS TO THE RESTORING IPHONE SOFTWARE, IT LOADS 1/2 THEN FREEZES. IVE LEFT IT LIKE THAT FOR AT 30MINS AND NOTHING HAPPENS. IVE TAKEN THE CORD OUT AND HAD TO TURN PHONE OFF AND RESTART, THEN LOAD IT BACK UP TO ITUNES ALL OVER AGAIN. MANY TIMES!!!!! IVE CHANGED CORD AND USB STILL NOTHING? IVE GOTTEN TO THE POINT WHERE I MAY HAVE RUINED IT ALTOGETHER AND NEED TO BUY A NEW PHONE? PLEASE I HOPE SOMEONE OUT THERE CAN HELP?:
MANY THANKSYou may not get a response as you are shouting at everyone.
All caps indicates shouting, is considered rude, and is difficult to read.
Many will not read such posts.
Try turning off you caps lock and asking again. -
Hello. I have a problem. I live in Armenia, now I am in Guangzho (China) and i have lost my Iphone 4S. Tryed to find in icloud, no result. it seems the finder has switched off or deleted my apple ID. Please help me. Can I do anything with IMEI code?
IMEI number is no use.
If you can't track it using find my phone.
Then report the lost to the local authority and your phone carrier.
change your passwords.
Maybe you are looking for
-
Need help connecting safari, entourage, ichat etc to wireless internet
My macbook is my first apple, I've never used Mac OS X before, and I'm finding all the new terminology intimidating, so I would greatly appreciate any help you can give me, but please talk down to me like I'm 10 years old, or I won't understand. Here
-
Can I implement XI in a WAS 6.20 and R/3 Environment??
Can I implement XI in a WAS 6.20 and R/3 Environment?? R/3 being 4.60C OR R/3 Enterprise?? Thanks Sean
-
Dear All, I have gone through the note 981710 and understood that SAP supports fully IE 7 . We have Enterprise Portal with version EP 6.0 and we have updated the package level to stack 25. I would like to know will it now support IE7 and IE 8 as
-
Can anyone explain why music and books disappeared from my phone
My partner and I both have Iphone 4s. Recently I noticed a books collection app (I had purchased) was greying out on my phone. Didn't (stupidly) pay attention to it at the time. Next thing I realise this book collection and all my music has disappea
-
Sun Directory Server as Primary Domain Controller.
Hello, I've recently installed Sun Directory Server, Access Manager, and DSEE Identity Manager, on CentOS 5.2, with success, but my question is: Can I use this directory as a primary domain controller for my network, I want to know if it is possible