PLEASE HELP! Error Message When Trying to Publish Site

No matter how many of these errors I fix (edit the file and re-upload it onto the site), Muse comes up with a new error every time I try and publish. How can I resolve this issue, so I can publish my updated site. It should not be a problem with the files considering I have been able to publish the same files in the past...something is wrong with Muse itself.
PLEASE HELP!!@

Business Catalyst does not support special characters in file names (i.e. "&"). Through normal paths of placing or importing files, Muse will automatically alter the file names during publish to remove the special characters. The one exception path I'm aware of is an .oam file from Edge, where Muse doesn't have enough knowledge of what all is within the .oam package to safely alter the file names.
When the error occurs, is it always for a file that contains a special character in the file name?
How many files are being uploaded?
If you click "Resume" does the Publish process:
A) Proceeds and completes
B) Puts up the same dialog for the same file
C) Puts up a similar dialog, but for a different file
D) Other?
Thanks.

Similar Messages

I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

I receive the following error message when trying to publish site changes to iweb:
"Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
Can anyone assist?

Try the troubleshooting steps under "Fix iWeb" here...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
... and then republish.

Please Help - Error message when trying to open itunes

Hi
Can someone help pls? I was in the middle of upgrading my version of itunes and my computer crashed. Now when I try to open itunes I get an error message as follows: 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience'.
I don't know what to do! I am worried I have lost all of my music!?

hiya!
'Quick time failed to initialize. Error # - 2095. Please make sure QuickTime is properly installed on this computer'.
okay, let's try a careful standalone QT reinstall:
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

IWeb Error message when trying to publish site changes?

The 'publish error' says, "Can’t create the file “mwmac.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
No idea what this means or why I got it. I've published successyfully before. I did add a new jpeg to my file since last file but I can't imagine why that would be causing proglems. Any ideas?
I have the most up to date version of iWeb.

I have the same issue with the same error message, and this does not only happen when I am trying to publish to the internet, but also if I am trying to "publish" the changes to a folder on my mac book first. I don't have Mobile Me, and even if I did that would be defunct now anyway. This is my business & I really need to resolve this! Help!!!

Constant error message when trying to publish sites in iWeb 2.0.1

Dear All,
I have a few sites in iWeb (mostly from iWeb 1) and after upgrading to iWeb 2, finding my old sites again and installing the update I decided to build a new site. On completion and trying to publish I get:
Publish Error: An unknown error occurred.
I've tried "publishing all" instead but no change. No problems with iDisk, Firewalls, .Mac etc, however it won't publish to a folder either so it must be the program. Any ideas? Apparently the 2.0.1 update was supposed to fix this, but obviously not.
Alex

Alex,
If it won't publish to a folder then there is an element/file in the site that iWeb 2.0.1 is choking on. Normally, even when iWeb produces a publish error during upload to .Mac, it will still write the html locally, to a folder.
Check to see if you have some unusual file extensions on pics or movies.
You can test the worthiness of your iWeb app by making a simple page with a blank Domain.sites file and seeing if you can publish it to a folder.
-Mark

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Error message when trying to publish to iWeb

Got following message when trying to publish:
Publish Error: Asn error occurred while publihing file "/Web/Site/
iWeb/Dryton/Welcome_files/
navbar1rollover.png".
What does this mean? How can i fix.

If you're publishing to .Mac, try File > Publish All to .Mac

Keep getting error message when trying to publish imovie '08

I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
thanks,

That error usually means "Disk Full". Could that be the issue?

Error message when trying to publish iWeb

I am getting the following error message when I try to update my Blog:
An error occurred while publishing file “/Web/Sites/iWeb/The Drytown Project/Blog/Blogfiles/navbar_separator0.png”.
What do I do to fix?

I have gotten these messages, too, and never at the same time or with the same file. Fortunately, I am able to work around them by logging in while holding Shift (to prevent other apps from loading), then publishing all to .Mac. Seems to work reliably, but takes a long time and is a pain in the rear workaround that Mac users shouldn't have to put up with.

Help - error message when trying to run a program....

Getting this error message - been trying to load and get jforge going, but I'm sure this is a standard problem.
I'm trying to run this on WindowsXP Pro. Could this be an issue? Do I need any sort of plud-in for XP?
D:\software\jforge\jforge3j2>set CLASSPATH=D:\software\jforge\jforge3j2\jforge.jar;D:\software\jforge\jforge3j\public.jar;D:\software\jforge\jforge3j2\calpahtml.jar;;.
D:\software\jforge\jforge3j2>java com.tektools.jforge.JForgeMain
Exception in thread "main" java.lang.NoClassDefFoundError: javax/swing/JFrameBea
nInfo
at com.tektools.beaninfo.proxies.JDialogProxyBeanInfo.getIcon(JDialogPro
xyBeanInfo.java)
at com.tektools.jforge.loadedbeans.DefaultLoadedBean.<init>(DefaultLoade
dBean.java)
at com.tektools.jforge.loadedbeans.DefaultLoadedBeansManager.a(DefaultLo
adedBeansManager.java)
at com.tektools.jforge.loadedbeans.DefaultLoadedBeansManager.readBeansFi
le(DefaultLoadedBeansManager.java)
at com.tektools.jforge.JForgeMain.g(JForgeMain.java)
at com.tektools.jforge.JForgeMain.a(JForgeMain.java)
at com.tektools.jforge.JForgeMain.main(JForgeMain.java)

Those slashes in the first line of the error message suggest to me that maybe you referred to a class incorrectly in your source code.

Error Message when trying to "publish" webhelp file.

I need help please! After generating the webhelp file, when I click on the publish button, it starts to do what it is supposed to do then stops...giving me an error message that "file is already in use." Any ideas on how to fix this? Tnx!

Forget trying to "publish"....I really just want to send out the htm file out through email for review....Is that possible? When I tried it before, it looked like it was trying to open the file from my temp directory instead of where it is actually located.....

Error message when trying to publish an existing site to my FTP

My iweb crashed about two weeks ago. I lost it and finally got help from someone at Best Buy. iweb recovered! problem solved! So I thought! Most of my images were gone and I had to update most of my pages. Now when I go to publish, it says page already exist with the same file name and do I want to replace? I say yes and then I get an error message saying "Disk may be damaged or full, or I may not have sufficient access privileges. Can anyone Help??? I tried a few things, with no success.

First, try publishing to a local folder and, if successful, launch this version in the browser by double clicking the index.html file.
If this is OK your problem is with FTP or your server.
If you can't publish to a local folder or there are problems with the site, try the troubleshooting steps under "Fix iWeb" here....
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Please help - error message when installing iTunes 10

I have tried several times to install iTunes to my laptop. Every time, I get an error message that reads: "The installer encountered errors before iTunes could be configured. Your system has not been modified. To retry these operations at a later time, please run the installer again."
I tried deleting the temp file and uninstalled all Apple components and still get the same error message.

Perhaps let's check to see if at least some of the iTunes components install.
Try installing QuickTime "on it's own". (Actually, this'll install a fair few of the other related itunes programs too, but not all of them.) Get the installer that doesn't mention itunes:
http://www.apple.com/quicktime/download/
Does that install for you? If not, what error message do you get on the QuickTime install?

Why do I get an error message when trying to publish animate deployment package?

I continually get the following error message every time I try to publish an animate deployment package. I have no idea what Poster3.png is. There is no image in my file with that name. I have tried saving my composition under a new name and it doesn't resolve the issue. I have no idea how to fix this.

You may get this error if you had done the following:
- create a comp and save it
- publish to OEM
- delete the poster in file system
- publish again
Workaround:
Go to the composition click on stage and generate a poster image from the properties panel.
Now publish again.
Let me know if this works.
-Sujai

PLEASE HELP! Error Message When Trying to Publish Site

Similar Messages

Maybe you are looking for