PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

I recently purchased a time capsule to use in conjunction with my mac. When I am prompted to connect the ethernet cable from the lan port on my fios router to the wan port on the tc, the cable will not connect properly to the lan port on the tc. If I connect it from the lan on the fios router to the lan on the tc the green indicator lights up to indicate a connection but this does not help the wan port situation. I am able to locate the network I created from my mac but this tc network is not connected to the internet as indicated by the amber blinking light on the front of the tc. Also since creating this non working tc network, my fios signal is almost non existant! I am new to all of this so any help at all would be greatly appreciated!!!

Don't worry about the cable. For now.
Set the TC to bridge mode.. In bridge there is no wan port.. so you can use any port on the TC.
Test with the TC plugged in FIOS.. use in turn all the ports to see if it will work.
Do not change any setting but bridge the TC from default.. ie do not set extend wireless.. that will totally foul it up. Do not use join wireless, that will triple foul it up. Absolute default.. set TC to bridge... plug into the FIOS.. ethernet to any port that the light goes on.
Do a snapshot of the TC setup from airport utility and post.

Similar Messages

PS3 error: "An Ethernet cable is not connected" with E2000

Problem: My PS3 displays An Ethernet cable is not connected almost immediately after logging in. I am connected through a Linksys E2000 router. If I reset the cable modem, it will work for 10-15 minutes until it errors out again. If I plug the PS3 directly into the cable modem, it works fine. I'm really confused.
1. I do not believe it is the router, as my computer is also connected to the router, and works fine. My Touchpad is connected wirelessly and also works fine.
2. I do not believe it is the PS3, because it works fine if I plug it directly into the cable modem. I tried switching to wireless and it finds a lot of other signals (including mine), but I have the same problem if I choose wireless.
I first had this problem with a launch PS3 and a Netgear router after almost three years of no problems. This was back in November 2010. I replaced it with a Linksys E2000 router in January 2011, and a slim PS3 in late September 2011.
I had no problems from January until last weekend. I have tried to do the DMZ trick, but no luck. I have also tried to set the primary and secondary DNS to 4.2.2.1.
Does anyone have any insight? If I need to buy a new router, I will, but I don't understand because it works for my computer and Touchpad. Is it something crazy like when November comes, my internet settings get corrupted?

Try using the DHCP reservation feature to give your PS3 a "static " ip outside of the DHCP server range. So something above the range called "IP Address Range". 192.168.1.150 should be good, but you can check to confirm that this address isn't in that range.
Make sure your PS3 is set to obtain the network information automatically, NOT through a custom setting. Also, make sure your PS3 is turned off completely before doing this.
Could you also give us a screenshot of the "signals" tab when you go to 192.168.100.1?
I don't work for Cisco. I'm just here to help.

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Please help: Workflow service is not connected

This questions is in continuation to my query posted ...see below link
https://social.technet.microsoft.com/Forums/office/en-US/e6a880d4-e252-49bc-8866-f3f959abf23f/do-i-need-to-have-sharepoint-designer-2013-installed-on-sharepoint-2013-production-server-to-create?forum=sharepointgeneral
I noticed that the web application is associated with "Workflow Service Application Proxy" from Central Administration site. However
I do not see Workflow Service application listed in the Manage service applications, but only Workflow service application proxy is listed and when I clicked on this, I see that the workflow is not connected though it shows started.
Also Ran ‘Get-WFFarmStatus’ command to check if the Workflow service is running, and to my surprise it is running.
Snapshot below:
If I re-register the workflow (used below command), I am getting Register-SPWorkflowService : Failed to register because the farm or partition
is already registered with a workflow service
Register-SPWorkflowService -SPSite "http://abc" -WorkflowHostUri "http://localhost:12291" -AllowOAuthHttp
I am unaware of this… but now I am doubting if this is creating the problem. I have registered the workflow withhttp://localhost:12291
on my SharePoint server. Should the workflow have DNS entry to register?
Also, we do not have user profile service, so the user profile service & user profile synchronization service are not started. Do I need to start ‘user profile
synchronization service’ as Nikhil suggested.
Please help me to resolve this issue please.
Regards,
DJ

Hi Rookio,
Based on your description, your workflow service is not connected.
For troubleshooting this issue, I recommend to verify the things below:
1. Check the workflow management site is starting. If yes, restart the workflow management site.
2. Check the ULS log to see some information about your problem.
3. Re-register workflow service with force: Register-SPWorkflowService -SPSite "http://myserver/mysitecollection" -WorkflowHostUri "http://workflow.example.com:12291"
-AllowOAuthHttp -force.
4. Run the PowerShell command to see if the issue still occurs: Enable-SPFeature -Identity WorkflowServiceStore –Url $yourUrl.
Per my knowledge, you do not need to start user profile synchronization service when configuring the workflow manager.
However, the user who deploys and runs a workflow must be added to the User Profile service, so it is recommended to start the user profile service application.
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
More reference:
http://www.datazx.cn/Forums/en-US/7675ea81-457d-4491-a224-e34471beec63/action?threadDisplayName=sharepoint-2013-workflow-manager-not-connected&forum=sharepointcustomization
http://sharepoint.stackexchange.com/questions/79275/sharepoint-2013-workflow-manager-missing-service
http://anujabhojani.blogspot.be/2013/06/the-option-for-sharepoint-2013-workflow.html
Best regards,
Victoria
Victoria Xia
TechNet Community Support

WRT54G not connecting properly with Netgear switch

I have a WRT54Gv4 which I've been using as both a WAP and a wired switch. I now have too many wired devices to plug into the built-in switch, so I tried to expand the WRT54G using a Netgear FS108 8-port switch. The WRT54G and the FS108 both work perfectly well when not connected to each other, but all hell breaks loose as soon as I plug them together. If I plug the cable into a regular port on the FS108, then the "network activity" light on the corresponding WRT54G port blinks rapidly and continuously. If I plug the cable into the uplink port on the FS108, then the "network activity" light on the FS108 port blinks rapidly and continuously. I get around 50% packet loss trying to communicate between a computer plugged into the WRT54G and another computer plugged into the FS108. I've already tried 3 different cables between the WRT54G and the FS108, and all have exhibited the same problem. I have also tried all kinds of power cycling of the different devices, and nothing I have done has worked.
So I have two questions:
1) Has anyone successfully connected a Netgear FS108 to a WRT54G? If so, how did you do it?
2) Has anyone successfully used a Linksys SD208 or EZXS88W switch with a WRT54G? I'm going to buy one of these to replace the FS108 if nobody can answer the first question.
Thanks.
Message Edited by stharward on 06-09-2008 07:48 AM

If you have McAfee anti-virus, then I guarantee IT IS a McAfee + Vista issue. In the Firewall settings for Vista, enable Peer-to-Peer and add and enable ports TCP 5357, TCP 5358, UDP 3702, TCP 2869, UDP 1900, UDP 137, UDP 138, TCP 139, TCP 445. THEN, disable Vista Firewall and enable McAfee Firewall. Click on Internet & Network Protection and then Configure. This is where the McAfee Firewall protection is enabled. Click on the Advanced tab. Click on Grant Full Access and apply. Click OK, close out and reboot. Your system will utilize the McAfee Firewall and not the Microsoft one, and as long as you have WAP encryption and a private network, your Linksys router will allow printer and file sharing and be protected.

Please help: my website does not display properly in firefox

(note) everything works fine clientside
I'm totally new here but I really really need help debugging
my website. The problem is I have a flash file the loads an xml
file to display pictures. Basicallly a gallery. It works in IE but
not Firefox and I can't understand why.
here is the offending pages
3dart Page |
Print Page
as you can see they display fine in IE. try in mozilla
firefox and the server just hangs. here is the actionscript from
the .fla:
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
description = [];
total = xmlNode.childNodes.length;
for (i=0; i<total; i++) {
image
= xmlNode.childNodes.childNodes[0].firstChild.nodeValue;
description
= xmlNode.childNodes.childNodes[1].firstChild.nodeValue;
firstImage();
} else {
content = "file not loaded!";
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("freelance.xml");
listen = new Object();
listen.onKeyDown = function() {
if (Key.getCode() == Key.LEFT) {
prevImage();
} else if (Key.getCode() == Key.RIGHT) {
nextImage();
Key.addListener(listen);
previous_btn.onRelease = function() {
prevImage();
next_btn.onRelease = function() {
nextImage();
p = 0;
this.onEnterFrame = function() {
filesize = picture.getBytesTotal();
loaded = picture.getBytesLoaded();
preloader._visible = true;
if (loaded != filesize) {
preloader.preload_bar._xscale = 100*loaded/filesize;
} else {
preloader._visible = false;
if (picture._alpha<100) {
picture._alpha += 10;
function nextImage() {
if (p<(total-1)) {
p++;
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function prevImage() {
if (p>0) {
p--;
picture._alpha = 0;
picture.loadMovie(image[p], 1);
desc_txt.text = description[p];
picture_num();
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0;
picture.loadMovie(image[0], 1);
desc_txt.text = description[0];
picture_num();
function picture_num() {
current_pos = p+1;
pos_txt.text = current_pos+" / "+total;
stop();
if anyone would help me debug this I would really appreciate
this, I'm not good with code. I'll give you the source files to
look at if need be, i'm desperate! thanks

Can you attach some [http://en.wikipedia.org/wiki/Screenshot screenshots] for comparison to show what you mean?
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

Please Help my iPhone is not charging properly

lastnight i put my iphone4 on charge at 11% when i plugged it into the wall and swithed on the power it had no reaction at all it didnt light up make a noise at all so i plugged it into a different outlet it still done the same thing so i left it over night and woke up this morning only to find it had charged but very slowly it took all night to get from 11% to 44%???? is it the phone or the charger??? normally my phone will charge to 100% in 2-3hrs?? any advice would be much appreciated.

Reset, hold both home and power buttons until the iPhone restarts itself, ignore the "slide to power off" let it restart itself. If still problem, the plug symbol usually means battery issue. Make Genius appointment, Apple Store can perform quick battery diagnostic testing.

Help! iMac would not Connect/Find with Airport Extreme

Strange issue. I used to connect my Airport extreme with iMac, until recently iMac could not join with aiport. Instead my iMac connected to my neighbor's network. I'm using Time Warner cable.
However, my MBP and my Dell laptop could connect to my airport. Any ideas what could interfere with my iMac? I already called the Tech support and even went to the Apple store, they all said is the iMac since the iMac was able to connect with all the airports at the store. The tech support suggested me to move my airport to a room with less interference. Is that right? the iMac or the airport should I move?
We spent 2 hours, resetting back to factory setting and still iMac could not join Airport Extreme.
Any suggestions or advices are appreciated.
Tom
iMac Mac OS X (10.4.10)
Mac OS X (10.4.10)

Thank you for your e-mail, Duane. Yes, the airport express (hooked up to my stereo in the dining room) does receive iTunes from my G5 in the office. The light is a blinking yellow, but it still receives the signal.
Last night, I was able to get an internet signal on my eMac (with airport extreme card installed) from the VersaLink router that my G5 uses in the office!
I figured out that the eMac and G5 were obviously not communicating with each other, and went to the Airport icon on the top of both screens to make sure that the Location Names were correct. I discovered that I needed to change the G5 from the Airport Express Location (stereo)to the name of the eMac location (Master Bedroom). Then I got the network connection. I suppose to play iTunes to my stereo, I will have to change the location, again, right?
Another comment: I was rather amazed that, after at least an hour and a half phone conversation with three different technicians, no one came close to this solution. And I'm paying for technical help (two years left on a three year contract)! Evidently, it is not common knowledge that a wireless router and an airport extreme card with mini-antenna can communicate? I came close to buying an Airport Extreme Base Station because I thought that I might need it!!!
So, I'm thinking I'm in the right ballpark but would welcome any more comments.
Thanks for listening.
Dave

Adobe FLME Error Message "Please check if video devices are connected properly and are not used by any other application."

Hello, I'm trying to use my MAC Book Pro with Adobe FMLE. Once I select either my internal or external camera and microphone, in the live encoder I get this error message. "Please check if video devices are connected properly and are not used by any other application." The Facetime HD camera works in Photo Booth. Can someone assist me in what to do please, Thanks in advance!

Hi all ,
We found the solution for this issue .
We have installed the crypto library in global executable directory and any way it will replicate those binaries to individual application servers.
But the parameters are still looking for global executable directory for loading crypto library during time.
So all application servers are trying to load crypto library files from global "exe" instead of local directory, which was clustered .Sometimes during heavy network load it may cause some delays to load the libraries to individual application servers and in turn is causing the license key issues.
Note 982056 - The license key library has not been initialized yet..
SAP Recommend option for all SSF parameters should be instance profile parameters not in default parameters..This was mentioned in below note:
Note 662340 - SSF Encryption Using the SAPCryptolib --- .
But in our Environment SSF and SEC parameter were set in DEFAULT profile instead Instance profile.
Recommendations:
o ssf/ssfapi_lib = <Path and file name of SAPCRYPTOLIB>
o sec/libsapsecu = <Path and file name of SAPCRYPTOLIB>
This was mentioned in the below SAP HELP.
http://help.sap.com/saphelp_nw04/helpdata/en/3d/bf463c6796e61ce10000000a114084/frameset.htm.

TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Please help! I do not see the songs on my iphone when it's connected to my computer . I want to transfer the songs back / forth. thanks in advance.

Please help! I do not see the songs on my iphone when it's connected to my computer in Itunes. I want to transfer the songs back / forth. thanks in advance.

iOS 7.1 update requires approximately 350MB's of storage space.
Tap Settings > General > About > Available to see free storage space.
Very important to never allow the free storage space to fall below at the very least 500MB's or your iPhone may not boot.
You need to free up storage space on your iPhone for future updates as well.
Help here > 6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch

Step "Start" is not connected properly in Visio

Hi All,
I have designed a workflow with 4 steps like start. process, approve, stop via DM. I am getting the following error while saving the workflow design
: Step start is not connected properly. I could not save the wrkflow design.
Here am giving the start step properties :
Name : Start
Check Out records : No
Duration Timeout : 1 wk
Cc: Notification : [owner]
Send Next step : [Anyone]
Split Job : [Anyone].
I have checked in the DM by selecting the record in the main table and righ clicking on that workflows->Add to job is also disabled.
I have checked the same by closing visio but still "Add to job" is grayed out.
Can anybody guide in the visio why am unable to save the
workflow design and Add to job is disabled?
Please help me out...
Thanks & Regards
Sireesha.

Hi,
Problem 1
Please check if the start step of the workflow is properly connected to the next step.Connect it properly and save.
Problem 2
Add to job is disabled
to resolve this problem go to workflow table in data manager select your workflow name in Records pane then go to Record Detail and check if the Active ="Yes" if not then assign Active="Yes".This will surely solve your problem.
Reward if helpful.
Regards,
Vinay Yadav
Edited by: Vinay Yadav on May 28, 2008 7:42 AM
Edited by: Vinay Yadav on May 28, 2008 7:48 AM

Please help! I try to connect to the Internet but appears inscription There is no expansion of kernel PPP. Yesterday I used internet through the same connection- Dsl pppoe

Please help! I try to connect to the Internet but appears inscription There is no expansion of kernel PPP. Yesterday I used internet through the same connection- Dsl pppoe. Wi fi cannot connect too. On ipad and iphone it is work.

That's odd.
Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.

HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

You need to update to 10.6.8 using Software Update.

Please help me in my note

Please help me
I have a problem occurred with My iClaude Notes The refugee disappeared without warning
Please help me in any way where I Feedback is very important
Please
I recovered form an important and why this problem occurred with me I will lose my credibility in my icloude
Please help me
Please help me
Please help me
Please help me

They are on your iCloud mail, if you had that option activated on iCloud.

PLEASE HELP! ETHERNET CABLE IS NOT CONNECTING PROPERLY WITH FIOS ROUTER

Similar Messages

Maybe you are looking for