Please help explain SAP Benchmark Terminology

Hello,
I am looking for help in understanding the terminology of some benchmarks for SAP applications. I have read and re-read several pages on their website, including http://www.sap.com/solutions/benchmark/index.epx but still are not 100% clear. I would greatly appreciate if someone familiar with SAP would answer the following questions:
Q1. SD Standard Benchmark - is it correct that this is not a single benchmark, but actually a generic term referring to all the SAP benchmarks including benchmarks for: Power, ERP, Supply Chain, Banking, Utilities, NetWeaver, Enterprise Portal, Customer Relationship Management, Product Lifecycle Management, and Retail? If not, what is it?
Q2. SAPS - is it correct that this is a unit of measurement and not a benchmark? It looks like the results of the Sales and Distribution (SD) Benchmark are reported in SAPS.
Q2b. I have seen cases where people refer to the "SAPS" benchmark. If SAPS is a unit of measurement, is it safe to say that SAPS is another way of referring to the Sales and Distribution (SD) benchmark? If yes, is it the 2-tier or 3-tier version?
Q3. I have also seen cases where people refer to the "SAP" benchmark. What are they most likely referring to?
Q4. Please confirm that the following all refer to the same benchmark: SAP-SD Two-Tier, SAP SD 2-tier, SD2 SAPS, and SAP SD2
Q5. Similarly, please confirm that the following all refer to the same benchmark: SAP-SD Three-Tier, SAP SD 3-tier, SD3 SAPS, and SAP SD3
Q6. Finally, out of all of the SAP benchmarks, which one benchmark, if any, is most widely used?
Thanks so much for your help!!!!

apparently, I have to repackage ALL my classes via the "export to JAR" link in NWDS. Using winzip is somehow screwing up the JAR.

Similar Messages

Please help in SAP Career

Hi all,
I am a B.Tech (IT) 2010 passed out candidate from Delhi.
Based on my interest, I have done course in SAP ABAP module from following institutes
1. Webcom Technologies (2011)
2. CDAC Noida (2012)
Things were not clicking as I was still unable to find a job.
Since May'13, I am working in a PSU as a Stipendiary Trainee with SAP MM end user profile.
Its almost a year now and need to get a job in SAP ABAP, kindly advice me how to approach ?
-> Should I go for certfication in SAP ABAP, will it be helpful ?
-> Or another advice.
Please help, all my batch mates are now 3-4 years experienced professional & I dont know where I am heading to?
Regards,
Nayan

As you have done course for ABAP module. Then what is the problem to get jobs.
Are you not getting any calls from any company ?
Have you upload your CV in various consultancy ?
Upload your updated CV to various consultancy like as Naukri, Monster etc. and search job for ABAP module and apply in various job.
If you want to go for certification, then you can. It will be extra knowledge for your career.
Regards
Dev

Please help regarding SAP course

Hi everyone!
I am an MBA( HR) and a fresher. I would like to be SAP techno functional professional. For that with which course i should begin with ABAP HR or SAP HR functional modules.
I am confused. Please help me to know the answers to the following queries-:
 1.What are the future prospects of SAP HR? 
 2.Are any other sap courses with a better demand than SAP hr modules
(like netweaver , knowledge management or business intelligence warehousing)?

 3.Can i go for training with local institutes as seimens does not fits in my budget? what difference will it make?
Waiting for ur response.

Hi Karan,
Techno Functional means it includes both Technical and Functional Knowledge.
For knowing Technical things, you need to go for ABAP HR training and for knowing Functional areas you need to go for SAP HR. I think for your profile SAP HR which means Functional side would be good. But for Technical, one need to have the basic programming knowledge of any tool/technology.Then only it will be easy, otherwise it will be difficult. But nothing is impossible.
Answers to your questions;
1.SAP HR is good in the market now and it will be good in future too.Also, competition is less when comapared with other modules.Very less people are taking this module.
2.Apart from SAP HR, the very hot hot module I can say is SAP FI/CO.It is king in SAP. Next comes Netweaver and SRM.
3.You cannot compare Siemens and local institutes. If you go for Siemens you will write the exam, pass and get the certification. Using this certification you can find a job easily.Normally, companies recognize only if you have some good years of experience or as a certified fresher.Because you do not have exp, this ceritfication helps you finding a job.But whereas if you go to local institutes you cannot get the certification and it makes very difficult for you to get a job.You have to put some fake experience and try. But this is not easy and not recommended.That too there is no gap as you are a fresher, so you cannot claim any exp. Without exp and without certification, no body will recognize you.
Think in all terms and then make a good decision. Good Luck for your future efforts.
Hope this is helpful.
Please reward if this info is useful to you.
Thanks,
Srinivasa

I forgot my passcode. Please help explain the steps to restore

Forgot the password after changing it :/ So what should i do? It locked me out for a good 5 days. now i can stop it getting locked by attempting to sync into itunes and that way i tried 40 different combinations with similar patterns to what i THOUGHT i'd set it to. i don't want to loose my contacts or texts. most of my music is in my library so thats not an issue. i've seen a few videos on youtube where you hold down the power button and the home button. would this work? i backed it up last week (before i set the new password). when i just went to restore it, it offered me a choice to back it up again as well. if i were to back it up now would that make it imposible for me to restore since the new back up has the lost password on it? or should i just restore it to the one from last week??? Please help?? Phoning doesnt seem to work. i want to restore it to the backup i made last week but the way its asking me if i want to back up before i restore is what's confusing me.... if i click "dont back up" it says it will restore to factory defaults and everything will be lost but if i back up does'nt that mean it'll just restore to the way it is now...as in it'll restore itself to the part where i dont know the password... if any of that made any sense :S

If you are unable to restore your iPhone with iTunes without having to enter the passcode, you will not be able to update your iPhone's backup. You will need to place the iPhone into recovery mode in order to restore the iPhone with iTunes and you can restore from the most recent backup available.
http://support.apple.com/kb/ht1808

Dv7t-3000 - Sata or Sata 2 - Please help explain what this has!

I assumed that Sata 2 being mainstream for so long, this new laptop of mine would have it.
I want to buy one of the nicer SSD for this unit, but I can NOT confirm anywhere that it will run up to 300 megs.
If it's Sata 1 then I wouldn't be getting much performance gain from a SSD as this 7200RPM HDD rates up to 100 megs.
I contacted HP Support and got told that my laptop only has Sata 1.
I find this impossible to believe. Why in the world would HP do that? I read in a post on the forums that this laptop
falls into the top 5% for overall performance for laptops. How is that so unless it has sata 2? Why would they
have old Sata 1 in such new technology?
Can anyone confirm if HP Support is correct? I have the guy second guessing himself right now and he asked for serial number to try and find documentation to support his claim. I may have to RMA this beast and start searching for a laptop that has SATA II because that is the main reason I wanted a laptop! For the SSD to WOW me!
Thanks in advance for your thoughts, input, and effort you may put into this!
WWW2000
UPDATE:
Otay. Now I understand why all the reviews out there say what they say about HP support. Makes you feel like you carried your new puppy into an auto garage to learn about it. WRONG people, wrong place!
Can anyone who knows english and knows about computers please tell me why the ... why HP would be retarded and put Sata 1 in this killer laptop? Do they really enjoy upsetting their customers? All I kept getting for that supervisior was "you computer customized and you hard drive you choose sata 1"
I bought it directly from HP.com so I could have everything in it that you may not get from a retail store. She couldn't seem to grasp that nowhere on hp.com does it let you know if you get sata 1 or sata 2. Option not offered and it SHOULDN'T be. It should automatically be sata 2! Sata one was like so 1998!
Sorry for being so upset. I just want a killer SSD to make this beast all it should be and HP is telling me it's not going to happen. Do I need to start an RMA? Or can someone confirm that I can get read speeds of 230 from that SSD I want?
Message Edited by www2000 on 12-01-2009 11:07 AM
This question was solved.
View Solution.

Hi,
Many owners(those who can afford it) of the dv7t series are putting OCZ agility and vertex drives in to replace their SATA hard disk.
I have no doubt that the speed of the SSD disk will wow you even if it isn't SATA2. Think about restart times of 58 seconds!
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Please help explain these bitwise operations!

I am working with a file that has a header with the size of the file encoded into 4 bytes like:
>
The ID3v2 tag size is encoded with four bytes where the most significant bit (bit 7) is set to zero in every byte, making a total of 28 bits. The zeroed bits are ignored, so a 257 bytes long tag is represented as $00 00 02 01.
I have found someone's code that puts this together into the integer value, but i don't understand why they do each step. Is there anyone here who can explain this code to me?
//Read in the bytes (why do they read char[] instead of byte[]?)
char[] tagSize = br.ReadChars(4); // I use this to read the bytes in from the file
//Store the shifted bytes (why is it int[], not byte[]?)
int[] bytes = new int[4]; // for bit shifting
int size = 0; // for the final number
* Why are they combining these bytes in this way if they're
* going to again combine them below (in the line setting "size")?
//how do they know they only care about the rightmost bit on the 3rd byte?
//how do they know to shift it 7 to the left?
bytes[3] = tagSize[3] | ((tagSize[2] & 1) << 7) ;
//Why do they use 63 here (I know it's 111111)?
//how do they know they only want the 3 rightmost of byte 2nd byte?
//And how know to shift it 6 to the left?
bytes[2] = ((tagSize[2] >> 1) & 63) | ((tagSize[1] & 3) << 6) ;
bytes[1] = ((tagSize[1] >> 2) & 31) | ((tagSize[0] & 7) << 5) ;
bytes[0] = ((tagSize[0] >> 3) & 15) ;
//how do they know to shift these bytes the amount that they do to the left?
size = ((UInt64)bytes[3] | ((UInt64)bytes[2] << 8) | ((UInt64)bytes[1] << 16) | ((UInt64)bytes[0] << 24)) ;

6tr6tr wrote:
You've GOT to be kidding! I posted only ONCE on THIS forum. Javaranch is owned by a different company and does NOT have all the same members that this web forum has. Posting the same question on completely different websites' forums is NOT cross-posting. Cross-posting is posting the same thing in different boards of ONE website's forums.Absolute rubbish. Here a couple of links for you:
Wikipedia:
[Crossposting is the act of posting the same message to multiple forums, mailing lists, or newsgroups.|http://en.wikipedia.org/wiki/Crossposting]
JavaRanch's FAQ:
[There might be times when you are inclined to post a question not only at JavaRanch, but also at some other site. When you do so, keep in mind that this is not generally in the interests of the posters who might be responding to your posts - those folks may find they've wasted their time. You certainly don't want to annoy those you want to help you, so you might want to make the experience as painless as possible.|http://faq.javaranch.com/java/BeForthrightWhenCrossPostingToOtherSites]
Sun's FAQ, section C2:
[Post once and in the right area: Multiple postings are discouraged, because they make the category lists longer and create more email traffic for developers who have placed watches on multiple categories. Because of this, duplicate posts are considered a waste of time and an annoyance to many community members, that is, the people who might help you.|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ]

Please help explain strange behaviour of progressive relaxation..

Hello
I am building theo Oracle text querry and I stumbled on a behaviour which I cannot explain...
here is the topo:
I have created a synonym thusly:
ctx_thes.create_relation('GR_THESAURUS','LEBOURGNEUF','SYN','BOURGNEUF');
when I issue this select:
SELECT SCORE(1) NIVEAU_RECHERCHE, NOM,NO_MATRC,NO_NOM_REGST
FROM DUMMY
WHERE CONTAINS(nom, 'SYN(LEBOURGNEUF, GR_THESAURUS)', 1) > 0 ;
I get the expected result set which containsentries with either 'LEBOURGNEUF' or 'BOURGNEUF'. So far so good.
Now, when I combine search criterias using progressive relaxation, thus:
SELECT SCORE(1) NIVEAU_RECHERCHE, DUMMY.NO_MATRC,DUMMY.NO_NOM_REGST,DUMMY.NOM
FROM DUMMY
WHERE CONTAINS(nom, '<query>
<textquery lang="FRENCH" grammar="CONTEXT">LEBOURGNEUF golf
<progression>
<seq><rewrite>transform((TOKENS, "{", "}", "AND"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "{", "}", "OR"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "OR"))</rewrite></seq>
</progression>
</textquery>
<score datatype="INTEGER" algorithm="DEFAULT"/>
</query>', 1) > 0;
I do NOT get any results matching synonym 'BOURGNEUF'.. only those with 'LEBOURGNEUF' are returned...
further, if I intentionaly make a syntax error in the line
<seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "OR"))</rewrite></seq>
say like this:
<seq><rewrite>transform((TOKENS, "xSYN(", ",GR_THESAURUS)", "OR"))</rewrite></seq>
no error is returned and I get the same result set...
so this leads me to conclude that only the first two lines of the query are parsed/executed...
does anyone here have any ideas what is going one here?
in the preceding quire I neeed to add
 <seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "AND"))</rewrite></seq>
<seq><rewrite>transform((TOKENS, "SYN(", ",GR_THESAURUS)", "OR"))</rewrite></seq>
and possibly
<seq><rewrite>transform((TOKENS, "NT(", ",2,GR_THESAURUS)", "OR"))</rewrite></seq>
can this be done???
why is there no errors when I execute the query (in sqldeveloper) ???
any hints will be greatly appreciated!
Cheers
Edited by: user8848610 on 2009-10-29 07:46

now it works... although the simpler and cleaner solution of using transform would have been perfect, this function does a somewhat adequate job... I put it here so maybe it will help others ;)
 FUNCTION BuildSearchPredicate (texte IN NOM_ASSJT.NOM%TYPE) RETURN VARCHAR2 IS
 sSQL VARCHAR2(5000);
 sSeq1 VARCHAR2(1000);
 sSeq2 VARCHAR2(1000);
 sSeq3 VARCHAR2(1000);
 iFirst NUMBER(1);
 iPosition NUMBER;
 iToken NUMBER;
 CURSOR curWords(line_text IN VARCHAR2) IS
 select regexp_substr(line_text, '[^ ]+', 1, level) word
 from dual
 connect by regexp_substr(line_text, '[^ ]+', 1, level) is not null;
 BEGIN
 sSQL := sSQL || '<query><textquery lang="FRENCH" grammar="CONTEXT"><progression> ';
 sSeq1 := '';
 iFirst := 1;
 iToken := 0;
 FOR r_curWord IN curWords(texte)
 LOOP
 iToken := iToken + 1;
 IF iFirst = 0 THEN
 sSeq1 := sSeq1 || ' AND {' || trim(r_curWord.word) || '}';
 sSeq2 := sSeq2 || ' OR {' || trim(r_curWord.word) || '}';
 sSeq3 := sSeq3 || ' OR SYN(' || trim(r_curWord.word) || ',GR_THESAURUS)';
 ELSE
 sSeq1 := '{' || trim(r_curWord.word) || '}';
 sSeq2 := '{' || trim(r_curWord.word) || '}';
 sSeq3 := 'SYN(' || trim(r_curWord.word) || ',GR_THESAURUS)';
 iFirst := 0;
 END IF;
 END LOOP;
 sSQL := sSQL || '<seq>' || sSeq1 || '</seq>';
 iPosition := instr(sSeq1, ' AND ');
 IF instr(sSeq1, ' AND ',iPosition + 1) > 0 THEN -- we must have at least 2 AND operator for this to make sense
 WHILE iPosition > 0
 LOOP
IF instr(substr(sSeq1, iPosition + 5), ' AND ') > 0 THEN
sSQL := sSQL || '<seq>' || substr(sSeq1, iPosition + 5) || '</seq>';
END IF;
 iPosition := instr(sSeq1, ' AND ', iPosition + 1);
 END LOOP;
 END IF;
 IF iToken > 1 THEN -- no use in having OR if there is only one word
 sSQL := sSQL || '<seq>' || sSeq2 || '</seq>';
 END IF;
 sSQL := sSQL || '<seq>' || sSeq3 || '</seq>';
 RETURN sSql;
 END BuildSearchPredicate;
END GR_RECH;
this will combine search words using AND and OR and SYN like so:
SELECT GR_RECH.BuildSearchPredicate('LEBOURGNEUF GOLF') FROM DUAL;
will result in :
<query><textquery lang="FRENCH" grammar="CONTEXT"><progression> <seq>{LEBOURGNEUF} AND {GOLF}</seq><seq>{LEBOURGNEUF} OR {GOLF}</seq><seq>SYN(LEBOURGNEUF,GR_THESAURUS) OR SYN(GOLF,GR_THESAURUS)</seq>
thanks for you help!
cheers
gth

Please help explain: Difference btw Seekbar in a skin and Seekbar standalone component

Hi,
I am confused about the follwing, can someobe please
enlighten me.
I noticed that the "Seekbar" component inside any of the
default skins (e.g StellOverAll.fla) is just a place holder, it has
2 layers with one layer having just an outline of a rectangle. And
the SeebarProgress and the SeekbarHandle are place somewhere else
inside the Skin component. However, if I select the "Seekbar"
component from the component window and place it on the stage and
double click to look inside, I can see 4 layers, with the
SeekbarProgress component in one layer and the SeebarHandle on
another layer.
So my question is the following:
1. Is the "Seekbar" component in the skin DIFFERENT than the
"Seebar" component from the Component Window?
2. How does the "Seekbar" component in the skin interact with
the "SeekbarProgress" and "SeekbarHandle" components in the skin,
when they are OUTSIDE the "Seekbar" component?
Any answer will be greatly appreciated.

20. How Throttling is implemented in OSB?
SOA Work and Guide: OSB 11g - Throttling
21. How Transactions are configured in OSB? How you would set the transaction time-outs?
http://atheek.wordpress.com/2011/04/21/transaction-handling-within-osb/
Regards
Nasir

Please help explain

Hi,
I do not understand why my customized logon.par is not loading. I have modified my SAPMLogonLogic.java file so that my reset password functionality is customized. I have managed to load the classes and resolved build errors. I have removed the com folder from the umelogonbase.jar file. Prior to all these modifications, my logon.par was working without any complications. With all these modifications, my logon.par is not loading with a class not found exception (IAccessToLogic). I can understand that the logon.par fails because the portal is attempting to find this class in the umelogonbase.jar, which no longer has the class. However, I do not understand why it should still refer to umelogonbase.jar for the class since the class has already been built and output to the classes.api folder.
If I put a privatesharingrefernce or add com.sap.runtime.logon to the sharingreference, the logon.par loads, but without my customizations.
Questions:
1. why does my logon.par refer to the umelogonbase.jar for a class that is no longer there, but defined within classes.api (or src.core)?
2. wat should I do with the rest of the properties file in umelogonbase.jar?
Thank You.

apparently, I have to repackage ALL my classes via the "export to JAR" link in NWDS. Using winzip is somehow screwing up the JAR.

Please help explain this formulae

if {SOP10100.SOPTYPE} in [3, 4] then
{SOP10200.QUANTITY}
else
0
Does "in(3,4) mean that if the value of SOP10100.SOPTYPE is 3 or 4 ?

Yes the IN function means if the tested value is one of the possible values
for example
if 1 in [1,2] then
"in"
else
"not in"
will result in the word in being displayed because the tested value 1 is one of the possible values 1 OR 2
The square brackets [ ] surround the list of possible values
You can also do this
if "abc" in "abcdefgh" then
"in string"
else
"not in string"
Look in the help index for IN
Best regards
Patrick

Please help explain the error "Can't make «script» into type Unicode text"

i am writing an applescript for my eyetv installation that handles recorded shows. i have posted in their forums, without reply, so thought maybe i could get some understanding of the technicalities of the fault to try to fix myself!!
i have a sub-routine:
to deleteeyetvrecording(theRecordingID)
set theScriptLibrary to load script file "Macintosh HD:Library:Scripts:ScriptLibraryv1.scpt"
tell application "EyeTV"
theScriptLibrary's log_event("RecordingDone", "Deleting EyeTV recording: " & (get title of theRecordingID), 2)
try
delete theRecordingID
on error theErrorMessage number theErrorNumber from theErrorObject
theScriptLibrary's log_event("RecordingDone", "deleteeyetvrecording: " & theErrorNumber & ": " & theErrorMessage & ". Object: " & theErrorObject, 2)
end try
end tell
end deleteeyetvrecording
even though the line above the error works fine and retrieves the Title property of the eyetv recording, the delete command on the next line outputs to the log file:
Sunday, October 26, 2008 09:50:51 [ 1 ] Error deleting file (4/4): -1700: Can’t make «script» into type Unicode text.
what does this error mean? what syntax changes are needed?
note this sub-routine worked in v1 of my script - i only copy and pasted it to the v2 script! go figure!
regards
jingo_man

Hello
Without knowing what theRecordingID is, how deleteeyetvrecording() is called and what the actual code of log_event() is, I can only guess.
The said error log is most likely not written by the code in the try block you provided, which should throw error by itself when theErrorObject cannot be coerced to string. I'd guess you have an enclosing try block where you call deleteeyetvrecording() and the said error log comes from there.
As far as I can tell, you should not assume that you can always coerce theErroObject (that is obtained from 'from' parameter of 'on error' statement) to text.
Too little information to go any further.
H

Please help explain float floatValue()

float floatValue()
Returns the float value of this Float object.
int a = 10;
double C= 3.3445678;
float EE = a.floatValue();
I try that, but it is wrong. I don't understand what does the mean of Float object. By the way, could any one tell me whether any "Star system" (give stars to those who reply me in java forum) is here?
Thanks

It's wrong in that int is a primitive type, so it doesn't have any methods.
What are you actually trying to accomplish? If all you want is a float with the value 10, you can do:
float ee = 10;

Disk utility errors? please help explain

Repairing permissions for “Macintosh HD”
Reading permissions database.
Reading the permissions database can take several minutes.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Applications/iTunes.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents/ CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/CodeResou rces", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "sbin/umount" has been modified and will not be repaired.
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Warning: SUID file "usr/bin/quota" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
Permissions repair complete
what does this mean?

Your profile shows your at 10.5.3, what version of the OS X are you running?
Leopard is up to 10.5.8
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1058comboupdate .html
Snow Leopard is at 10.6.2
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosxv1062updatecomb o.html
If you are behind on the updates, reinstalled the OS X from your Install Disk or are having an issue with OS X, Download and Install the appropriate Combo Update above.
Then when you run Disk Utility > Repair Permissions again, most if not all of those should go away.

Help Please!! SAP Best Practices on creating Projects in NDS...

We are doing a Proof of Concept on using NDS to develop non-SAP Java applications. We are attempting to determine if we can replace our current Java development tools with NDS/WAS.
We are struggling with SAP's terminology and "plumbing" for setting up/defining Java projects. For example, what is and when do you define Tracks, Software Components, Development Components, etc. All of these terms are totally foreign to us and do not relate to our current Java environment (at least not that we can see). We are also struggling with how the DTR and activities tie in to those components.
If any one has defined best practices for setting up Java projects or has struggled with and overcome these same issues, please provide us with some guidance. This is a very frustrating and time-consuming issue for us.
Thank you!!

Hi,
Following URls gives you info about how to install JDI, what are DC's,SC's,how to define Track,how to manage versioning etc..
You need to install the JDI separately. Go to http://service.sap.com/patches -> Entry by Application Group -> SAP Net Weaver -> SAP NETWEAVER -> SAP NETWEAVER 04 -> NWDI -> JDI 6.40 -> #OS independent
https://www.sdn.sap.com/sdn/downloaditem.sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/sap enterprise portal 6.0 sp4 netweaver stack 4 developer sneak preview download.abst
https://media.sdn.sap.com/public/eclasses/nwbcil/Java_Development_Infrastructures_files/Default.htm#nopreload=1
http://help.sap.com/saphelp_nw04/helpdata/en/01/9c4940d1ba6913e10000000a1550b0/content.htm.
http://127.0.0.1:4180/help/index.jsp?topic=/com.sap.devmanual.doc.user/16/6c40450311774a8bb16f73e450f634/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/38/33eb9c3e1fe2409a9eba8246b933ca/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/78/52f0d3b3c8d1409d99a2148b2be596/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/78/52f0d3b3c8d1409d99a2148b2be596/frameset.htm (deleting workspace folders)
http://help.sap.com/saphelp_erp2004/helpdata/en/26/4b0d0930034b73aa3332ddc8c75e9d/content.htm
http://www.sap-press.de/download/dateien/817/sappress_java_programming.pdf (Chapter on JDI)
Hope this info helped you!
Regards,
RK

Excel Download of a Web SAP BW Report asks userid and password.please help

Dear BW folks,
Issue: When I run a specific SAP BW Report from Web and download the same into excel & csv.
When I open the excel file downloaded, it asks me user name and password to enter. csv file downloaded doesn't ask.
The report has 0cust_sales hierarchy and SBU hierarchy.
Is there any thing to do with these hierarchies that the excel download is asking user name and password?
Please help me out!!!!! This report needs to be downloaded into excel sent to my manager.....
Regards
Pavan

Hi Pavan
It is possible,please refer the below link
Report execution without prompting user id
Providing un-secured access to a web report.
Also, for the time being, you can run the query and save a workbook and sent across
These will resolve the issue
Thanks
Pavan Agarwal

Please help explain SAP Benchmark Terminology

Similar Messages

Maybe you are looking for