Please help external IP address and CCTV
Hi all,
I am really struggling to set up my router etc to try and get my Cctv camera to be able to be viewed over a 3G iphone app or another network. I can view the camera over my iphone, iPad etc as long as I am connected to my home network as soon as I lose that I can view the camera, have googled etc and it is saying need to port forward and set up external IP address, in all honesty I have a clue what this is, how to do and getting a little frustrated blindly typing things in, I have a home hub 5 please help some one.
Thanks
Si
There is an additional help page on this link.
CCTV and IP cameras - port forwarding
Which IP camera do you have?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
i forgot my icloud account and my email how can i recover it please help me icloud maker and icloud password and username holder
If you don't know your ID, you can try to find it as explained here: http://support.apple.com/kb/HT5625. Then you can reset the password as explained here: http://support.apple.com/kb/PH2617. Of course, you can only do this if it's your ID.
-
Hi there, can anyone please help? Download itunes and it says The Itunes library .itl file is locked, or on a locked disk or you do not have write permission for this file.
Holding down the shift key while iTunes is opening. That will bring up the 'choose iTunes library' dialog. Select 'Choose LIbrary' from the choices and navigate to your music folder and iTunes music folder.
Or refer to this article:
iTunes for Windows XP: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
http://support.apple.com/kb/HT1866 -
Please Help me in Labview and MS Access Database Connective
Please Help me in LabVIEW and MS Access Database Connective through an example . I am new to LabVIEW .I need simple example that take a data from a table and display it on front panel .
thanks in advance .duplicate post
-
can someone please help? my address bar is missing. All i have in its place is a grayed out tab that will not allow me enter a URL.
What browser?
Is this a Mac Pro? -
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
Can someone advise me why I am having this problem
Always in the past .I have my Word Document on screen and then I go to
Publish and it atomatically PDF the doc.
The same if I have a PDF to convert to word. I have the PDF on screen and
to the right of my screen it will say Convert .I press on convert it
converts to word
In a message dated 12/17/2014 10:01:32 A.M. Eastern Standard Time,
[email protected] writes:
I am having a problem converting word onto PDF . PDF into word.Please help
.I am signed and paid to Feb 2015
created by florencejohn (https://forums.adobe.com/people/florencejohn)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/7023171#7023171) -
Dear Apple,please help me.the glitch and lags on games made me sad beause i am too love with my 4s. Why iOS 7 really made me sad...please help me.im beg for you.
www.apple.com/feedback/iphone.html
No one from Apple is listening on these forums. -
While trying to import pictures from iPhone to iTunes, iTunes request to make software update and then to restore iPhone. I have cancelled the restore to rpotect pictures. The pictures have not been imported yet, but the iPhone display freezed at ITune connection page. Please help me save pictures and use the iPhone as usual. Restarting of the phone did not work so far.
RingomonIf the device is in recovery mode there is no date on the device to salvage.
Restore the device. -
Please help with A record and MX record!
Guys please help - our IT guy disappeared and we changed the hosting over the weekend. He did setup exchange server for all the emails so now i am trying to recreate all the settings in bluehost for email and the bluehost is asking whats A record for our
Exchange server. Forgive me but i am not an IT guy... where do i find the A record for our exchange server? I would greatly appreciate it if somebody could point me into that direction.If the DNS A record for mail.mydomainname.com is currently pointing to your Exchange server's external IP address then I would imagine that's setup correctly.
Name servers are those used to find out where to get the DNS records for a domain, eg it tells people doing a DNS lookup the address of your DNS server(s) so they can query them to find the required records. As such I'm unsure whether you actually mean name
servers or not.
Anything that ends in a .local address is definitely a local record, eg it is only used internally on your local network. On the internet there's no such thing as .local, so server1.mywebsite.local definitely wouldn't be the address you'd put into your public
DNS records. Do you mean that in Outlook when you look at the server address that you connect to collect email that it is displaying server1.mywebsite.local? If so then that's completely separate to where mail is delivered.
With the CNAME and MX records I'd suspect that they'd remain the same if they currently point to the mail.mydomain.com address, if they point elsewhere then you might well need to update them.
What confuses me is what is it that's been changed with your hosting? You say you've changed, and presumably bluehost are the new hosting company, but not what has changed to them. Do you mean the domain has transferred to them, or just the website, or your
internet access or something else?. You say that via the bluehost dns editor mail already points to mail.mydomainname.com, so it sounds to me as if the relevant records have already been setup and are working. Is email failing to be sent / received currently? -
Please help new to macs and my recently purchased power mac keeps freezing :-(
Hi apple community!
I recently purchased a power mac g5
Specs;
G5 power mac dual core (2.0)
Power pc 970 mp
Late 2005
I don't have an apple mouse/keyboard
I just use $40 wireless mouse keyboard.
Upon purchase everything seemed to work as it should....booted up, open and closing apps without freezing.
However I never had it connected to the Internet when I navigated through system.
I got it home and installed a 1 tb harddrive (WD mainstream desktop) from future shop. When I installed it in tower I had to buy a sata 2.0 cable as there was not one available for use. Booted up fine and installation went as my research said it should. Turned it on next day....
Tried to update iTunes and this is where it started actin up. First just froze had to turn off, second time wouldn't even boot up plus fans went into overdrive. Third forth fifth sixth boots fans sometimes kick in, now whenever I try to do any kind of action it freezes. (Only when I click something)
I read about possible power suppy issue, so I plugged tower and monitor into seperAte plugs,
They may however be in same circuit because they at in the same wall...would a power conditioner fix this?
Anyway still froze on any action tried...just opened disk drive...opened then frooze...?
Anybody have any ideas??
Please help
Not sure if this is correct OS ( looked up using serial #)
Max operating system OSX 10.5.8 leaporad
Earliest supported OSX version ; 10.4.2 tiger.Sorry for the late reply. I want to thank you for taking the time to help me.
Not sure exactally where I could get something like this your speaking of.
Update; I have removed the harddrive and will most
Likely just use an external one, if the computer will even work.
I ended up taking it in to geeksquad at best buy, they had it for 3 days and also told me after the fact that neither of the techs working on it knew much about macs :-( needless to say I requested my
Money back due to the fact that the service I paid for could not be completed and literally couldn't tell me anything more than what's below.
They told me that they could not dock it with thier diagnostic machine, kept restarting on them and the one fella said it was overheating but had no idea why. When I brought it home again I tried it once more computer boots up to desktop as usual, this time had a asterisk window saying " the computer was restarted after mac OSX quit unexpectedly" however my cursor was again locked in the top left of the screen. Would not move, so I could not view the report, shortly after fans kicked into overdrive. I'm losing hope for this machine rapidly. I'm all ears when it comes to anything I may be able to do.
Should I try an actual apple keyboard/mouse just to eliminate that possible?
If you have ideas AWSOME, If not, no worries, ill take it into the mac store and see what they say
P.s the machine is clean inside little to no dust and the tech said he was going to clean it out, hard to tell if he did because it was clean clean before I brought it to him.
Thanks again for the help you have given me so far and in the future
I look forward to hearing back
Sincerally
Al -
Please help. 3 beeps and gray file on startup
2012 Macbook Pro 13 inch. A friend brought it to me because of a white screen and gray flashing folder on startup. I booted to disk uility and saw that it did not see a hard drive. Pulled hard drive attached it with a external reader to my macbook. was able to browse all the files, and back them up. Formated hard drive with disk uility and put back in the computer. Disk uility did not see it after format. Put a different hard drive in computer, disk uility still doesnt see. it. Hardware test came back with no problems. I put a snow leopard cd in and booted, and i get a apple logo with 3 beeps. I have checked all connections adn removed battery. Please help i am out of ideas.
There a some fasteners that hold them in, if adjusted may restore functionality.
motownmedic wrote:
also would that cause the white screen with a gray file?
The HDD or the connection to the HDD is faulty.
Ciao. -
Please help - external hard drive security / privileges issue.
Yesterday while messing around with my mac I stupidly changed a setting I can't seem to remedy.
I may have somehow selected an obscure security / privileges option, most likely within the 'get info' option and now my external hard drive icon is not visible on my desktop so I can reselect it to unselect the setting. I know its ok because 'disk first aid' can verify its presence but I can't see it.
Urgently need access as I have data i need to retrieve.
Please help.
G4 OS 10.4I`m a little confused. Disk First Aid is a utility from MacOS 9.
Do you mean disk utility ?
If yes, in the upper line is a button for unmounting a disk. I don`t want to try it, but is it possible that a unmounted disk can be mounted again ?
I just found out, that when you move the cursor over the button, it says: unmount or mount a disk. Maybe that`s it.
Message was edited by: Helmut Kaleth
Message was edited by: Helmut Kaleth -
Please Help, Missing Project File and Discussion Advice Isn't Working.
Here's the rundown:
I was working in iMovie HD 5 when the power got cut out on my external hard drive. When I try to reload my project I got the 'Missing Project File' error that has been discussed by many on this board.
There are two known fixes.
1) Open the package and go back to the '~' version of the project.
2) Use the MovieTimeline.mov in the Cache to import it back into a new project.
Solution #1 simply didn't work.
Solution #2 imports the full video as a single long clip but is significantly lower in quality than the original version.
In addition, the movie was shot in true widescreen and plays in quicktime in 16:9 mode, but when I import that .mov file into iMovie HD for some reason bars are added on the sides and top and bottom of the frame, and the bars are thicker on the sides so it stretches the picture and makes everything look taller.
Although I'd certainly much rather have my original project timeline back, I could still continue my work if I could figure out how to import the .mov so that it retains the quality and size that it had to begin with.
Does anyone have any idea how to import it without losing the quality and size or how to gain back an earlier project save?
Please help if you can, my grandfather's 83rd birthday gala celebration (2 days away!) depends on it!I know you're in a rush, so I'll mention a couple other possibilities.
Solution #2 imports the full video as a single long
clip but is significantly lower in quality than the
original version.
• You shouldn't see any difference. The video imported from the Timeline Movie.mov is exactly the same as the original video. My guess is you're seeing some side effect of the widescreen issue. That, or your iMovie playback settings have changed.
In addition, the movie was shot in true widescreen
and plays in quicktime in 16:9 mode, but when I
import that .mov file into iMovie HD for some reason
bars are added on the sides and top and bottom of the
frame, and the bars are thicker on the sides so it
stretches the picture and makes everything look
taller.
• Make sure you're importing to a DV Widescreen project.
• It might work to open the Timeline Movie.mov in QT Player Pro and export to a DV stream set to 16:9, then import that to the new project.
• It's curious solution #1 didn't work. What happened when you tried that?
Karl -
Please help, school starts tommorow and this teacher can't connect Network
Hi, just returned to my work at school and I am having a problem connecting to the network at school as I'm a teacher. I just bought a MacBook Pro after 'donating' my ibook G4 to my wife . However, I cannot seem to access the schools network which I use to before on my ibook G4. I did, on the G4, use DAVE to connect and that worked fine. However, I have read and heard that in Leopard and with the MacBook Pro you don't need anything to connect to a PC network. So, after reading this I looked in the finder and, sure enough, I see the "shared" tab with "all". So when I click on "all" I SEE the network I can connect to. HOWEVER, when I double click on the file server I want it says "connection failed". I've even tried to use the DAVE 7.0 to connect (trial version) but that seems to have same issues as well. It mounts the file server but when I click on it it says "connection failed" as well. I tried to go into finder and to "Go" and then "connect to server" but what do I put in this field? whatever I type in this field, it adds an "afp:
" in front of it and says "connection failed". I even went into Terminal and pinged the network and it does that fine..so I'm perplexed..is there something I am not doing? Please help as it's first day of classes tomorrow and I really need to marry up with the network here! Thanks for any help ahead of time!Hey..thanks for advice..I just got this email from DAVE who mentioned something interesting about Leopard..not sure if anyone else is experiencing this. Anyway, I found I don't even need DAVE if I use their advice (and yours) and do it within Leopard. check it out:
There are a couple of issues with using the side bar and DAVE. Mac OS X 10.5 defaults to not displaying mounted volumes on the desktop. In order for mounted volumes to display on the desktop, you have to change a Finder preference, here is how,
- Click on Finder and select Preferences
- Click on the General icon and check the box labeled, Connected servers
- This will allow mounted volumes to display on the desktop
"There is an also issue with Mac OS X 10.5, that will not allow a user to connect to a network server from the side bar, or be able to access the contents of mounted volumes from the side bar (when you select the volume it shows Connection failed). Basically, you will not be able to use the side bar, until the problem is resolved.
The best way to access the contents of a mounted volume is to double click on the desktop icon. There are a couple of other workarounds for the issue, You can change Finder Preferences so that the user's computer is listed in the side bar. Selecting the computer will show a volume list which includes mounted volumes.
You can save an alias of the remote volume in the dock instead of the sidebar. Dock items function properly."
The funny thing is it works when I mount the volume to desktop but the sidebar doesn't work! Is this a Leopard thing? Weird...anyway, adding it using the Go and Connect to server with IP address works now...too bad the sidebar doesn't work though...thoughts?
Maybe you are looking for
-
How do I delete photos in the icloud and have them stay gone?
How do I delete photos in the icloud and have them stay gone!
-
Problems in creating new portlets with WLCS3.1
Hello, I've the following problem with Weblogic Commerce Server 3.1: I have added a new portal and it worked great. I put severals predefined portlets and it worked too. But when I tried to add a new portlet (the simple welcome.html doc sample), I ju
-
Adding a plug-in to just one audio file?
Hello, I'm really new to Logic Pro and I was curious if there is a way to add a plug-in to just one audio file in a track and not the whole track? Thanks!
-
Has anyone got ad hoc wi fi to work?
-
Website holds bandwidth and doesn't release it
Using DW3, on Apache 2.0 running on Fedora Linux 9. We have a multipage website developed in DW3. On the site we access numerous SWF pieces and several external sites (Feedzilla, a chat page, an IM extension to name some) and within 4 -5 hours our in