Please Help! Extremely annoying!
Can anyone tell me how to get rid of this extremely annoying problem?
In facebook chat the scroll bar of Safari covers up what you are writing!
Thanks!
iPaulMorrison wrote:
Ah yes that solves it! Well it solves it being in the way when maximised! I guess thats my price to pay for liking my windows snapped to the sides
As I posted... you'll get the same result by stretching the browser window horizontally until the scrollbar disappears (roll the cursor over the left or right edge of the window until it changes to an arrow pointing left and right). That way you can still have the space above/below your browser window for other things.
Similar Messages
-
HT4972 the apps weve downloaded are not working. please help, extremely frustrated with our ipod 4
the apps we have downloaded are not working, please help, extremely frustrated with our ipod 4
See my previous reply for for the apps closing.
For the wifi problem:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect OK before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I don't understand why it does this it turns off when it has above 20% of battery, I need to find out what's wrong because it's becoming really frustrating, please help. Does anyone else's do this?
ThanksHello Calduffy,
Thank you for the details of the issue you are experiencing with your iPhone4. I would be concerned too if my iPhone was unexpectedly powering off. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Please help; Getting annoying message
Hello,
I bought my first Mac about 2 months ago. It is a PowerBook G4 with a 1.67 GHz PowerPC G4 processor and 2 GB DDR2 SDRAW Memory. The hard drive is 111GB with 68 GB free. The operating system is Mac OS X Version 10.5.6.
The reason I am writing is I caused myself an annoying problem. Every time I startup the computer or wake it from sleeping I get a message 4 or 5 times then it stops until the next time I wake the computer or reboot it. This is the message I am getting;
"Internet Connect"
"Could not open the communication device".
It came about after I turned the Bluetooth on and configured my A707 Sync phone to connect to my Mac via Bluetooth. I needed to get some pictures off the phone. Ever since I did that I keep getting that annoying message and I have to hit okay on the message to get rid of it each time. Sometimes it comes up and I do not notice it because I am looking at the key board typing. Of course everything I just typed was not added because I needed to okay the message first. It is very annoying.
I have since deleted my phone and turned off the Bluetooth, but I still keep getting the message. If anyone has an ideas how I can get rid of this message I sure would appreciate the help. Please keep in mind I do not have any of the restore disks. I bought my Mac used. I did order a Firewire External hard drive to back it up. I hope to have this problem solved first.
Any help and suggestions are welcome!
Thanks,
Jamesyou could try moving either file one at a time, don't delete them though
if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
possibly you'd need to setup your network prefernces again
also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
maybe check Network preference pane, see what shows up in Bluetooth -
Hi i bought the WRT54G version 8 at xmas time. And ever since ive been struggleing with this DANM router. I have two home PC's both of which are hardwired (landlined) into the back of the router. I also play PS3 and Xbox 360 wirelessly. Now my problem here is that ive called for help like 3x now and they have given me advice and it seemed to have worked... but then it doesnt. My ps3 wireless connection is running terrible... im in the 1red(LAGGING) when im usually at full green. My internet connection is Aliant / DSL and i know it is the routers problem because my internet provider has already clarified to me that everything is running fine and i should not be having problems. I have upgraded the firmware version to the latest one... I have changed the MTU setting to manual at size 1429. I have gone into wireless / advanced setting and changed my beacon interval from 100 to 50. All of these changes were recommended by the Technician at Linksys.
Now the internet seems to be working better / a little faster but my PS3 wireless did not change one bit. Also i play a game on my PC called Starcraft. Ive never ever had problems with my connectivity to this game and ive played this game on and off for 10 years. These problems are really really annoying me and i dont know what to do. Im really frustrated and wish someone could help me because the technicians at linksys havent done **bleep** for me (excuse my language im just frustrated).
PLEASE SOMEONE HELP ME!!!!!the rtr have a NAT..it protects everything in the network but unfortunately sometimes it blocks some packets to make the ps3 work freely...i haven't read that you have done any port opening...pls verify!
now another problem is that a DSL connection uses NAT capable modem...its multiple NAT on your network...Its a big problem..
suggestion..
open the ports for the rtr...the port numbers you may ask from microsoft..click the link for the steps
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5402&p_created=11714...
do step 3 and 4 to open the ports that you will get from ps3...
CamZ -
Video does not Work in iTunes Store please help! annoying problem!
The video does not work in the itunes store. I get no picture, only sound when i want to preview a music video or a movie trailer. No video at all. However, i can watch my movies and music videos that i already own. Please, is there any smart guy who knows a solution?
I'm having this same issue. I tried some things but still couldn't get it to work the way it used too.
It will not play the video portion in iTunes only the audio if I click on the song. If I switch the settings from Music Video to TV show in the info tab, the file plays fine. If I open it in Quicktime, the file plays fine.
I've tried changing the preferences so that the video will play in the iTunes window, in a separate window, etc. and all it plays is the audio and will show the artwork instead of playing the video. -
I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
Please help - extremely slow broadband/ technical ...
Hi there,
for approx 2 weeks now there has been a change in our broadband connection. We have always experienced an acceptable broadband speed, but something suddenly changed recently and has left our broadband incredibly slow.
I noticed there was a BT openworld van in our street approx two weeks ago who seemed to be there for the whole day working on the telephone pole. Since he left that afternoon we have had terrible problems with our connection.
We are no longer able to do simple things such as stream videos, download anything or even open multiple tabs when browsing - its just too slow!
I did try a speed test linked from these forums which showed that the IP profile for my line is 135kbps, download speed achieved was 116kbps and "an upstream test was not conducted on this line due to a technical issue"
I'll be totally honest and say this all means nothing to me - I just want my broadband restored to its former self and actually be able to use it properly!
HELP!I run the initial speedtest using my ethernet cable - those hub readings were wifi connection.
Here are the speedtest results run a second time (ethernet)
download speed 0.13mbps upload speed 0.36mbps http://www.speedtest.net/result/1466971666.png
Here are the hub readings also whilst still connected via ethernet
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 00:23:36
Downstream:
2.188 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.6 dB / 18.0 dB
Line attenuation (Down/Up):
56.4 dB / 31.5 dB
Output power (Down/Up):
17.6 dBm / 12.3 dBm
FEC Events (Down/Up):
4639 / 0
CRC Events (Down/Up):
2 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
10 / 0
Error Seconds (Local/Remote):
2 / 0 -
I need some help!
See:
iOS: Troubleshooting applications purchased from the App Store
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
Windows Vista. FF 10.0.2 (2 days ago).
Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down. -
Please help - extremely urgent.
My apologies for the simple question, but I can't for the life of me remember how I once got this to work.
I have an third party app that passes a double value to my program, then later retrieves this value from the program.
<snip>
tranTotal=0.0
void setTranTotal(double t)
{ tranTotal = t; }
double getTranTotal()
{ return tranTotal; }
</snip>
In the even that a double with the last number of 0 is passed, when the app retrieves tranTotal from my program, the 0 at the end is truncated. I have tried changing tranTotal to String, then using DecimalFormat, but because I cannot change how the third party app sends this data to me, I keep getting exception errors stating that a double value is expected. It is important that I point out, that this app and my program can sometimes pass this number back and forth multiple times.
I hope that is clear. Can anyone suggest a workaround? Or possibly a way to keep tranTotal as a double and always display two fraction digits?Its actually 21.50 being truncated to 21.5 - the
issue is that by using DecimalFormat, I have to return
a String. I get passed this value as a double, my JSP
displays this double, then passes it to java program.
This JSP later retrieves the value from the java
program (still a double), and the 0 is being dropped
from the end. Whats driving me nuts is I did this once
before, then dumb me uploaded what I thought was the
latest version of my Java program to the server, and
overwrote the part that had this taken care of. It sounds like the issue is in the JSP page. As I said before, to your program 21.50 is the same as 21.5. They are both stored as the same sequence of ones and zeros. The issue is how you display that value to the user and whether it will display trailing zeros on such numbers. When you change it to a String it is no longer a number. As far as the computer is concerned it is now a group of character values.
Unfortunately, I haven't yet had a chance to use JSP, so I'm not going to be great resource. We use a terrible web developement product. The company responsible for this atrocity has, in their infite wisdom, decided to completely remove all traces of documentation, including APIs from the web for their Servlet classes. Thanks SilverStream or eXtend or whatever you call yourself now, you've really screwed us. We'll be contacting your competition very shortly. Anyway, this is why I am procrastinating here all day.
My best guess (I do have a JSP book, I'll look in a second) is that there is some sort of formatting syntax that you can use to make display as desired. I would think it would be consistent with NumberFormat. -
After resetting my Airport Extreme, I can't get it to work! Please help!
Hey everyone!
I have an airport extreme base station (wireless n-gigabit ethernet) and awhile ago it stopped working on me. I simply reset my aebs and whenever I open airport utility and try and configure my aebs, it tells me I have an error and can't connect to the aebs. I have comcast internet service and my aebs is connected to my router. It's been working successfully for about a couple months and now it's stopped working. : (
I've tried this both in manual setup and the regular setup. I've gone through the trouble of doing a hard reset (pressing the reset button until it flashes amber), I've unplugged the power while holding the reset button, connecting my laptop with the aebs via ethernet, making sure everything is updated (and it is), resetting the router, and even reinstalled my airport utility disk.
Please help! Any suggestions would be greatly appreciated!I also tried setting up my aebs on my neighbor's internet and it worked like a charm! Setting up aebs was as easy as when it first worked. Now if only I can get it to work on my internet...
-
My iPhone 5s (16GB) is stuck with 3948 photos (shown on the iTunes storage bar) on and I can not find a way to delete them all! It's very annoying as it takes up 6.54 GB of space and leaves me no room to add films, music...etc on to it. Please help me!!! I have already tried the numerous articles Apple have sent my way and I am still having no luck.I'd be eternally grateful if anyone could find a solution for me as this has been a problem for almost a year. Thank you.
If they were put there via iTunes sync process, then simply untick the Music box before syncing again.
-
"Connect to iTunes to Use Push Notifications" comes almost in every app that I open and it does not notify me when I got message in Whatsapp and Viber. Please help me to overcome it, it is becoming quite annoying!
Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.
-
I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!
Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem
Maybe you are looking for
-
Brand new MacMini keeps dropping wifi signal please help
Hi i have a brand new macmini which has been working perfectly fine untill today where safari seemed to be really slow sometimes not even loading searches, i checked if my wifi was connected but it changes from connected to searching for network.. My
-
I've been building a site in Muse successfully until today when I get this error message in the browser, publishing to business catalyst as a test bed: Some files on the server may be missing or incorrect. Clear browser cache and try again. If the pr
-
OIF 11g How do I pass a static value in an attribute inside a SAML response
This is what Oracle documentation says you should do: http://docs.oracle.com/cd/E21764_01/oim.1111/e13400/configoif.htm#SFSAG1696 For testing purposes I implemented the example given in the documentation. It doesn't seem to work. Using WLST I queried
-
so the 3g has been out a while now and i still cant find an adapter so my CD player in my car will charge my iphone 3g. i see cablejive has made one that will be on sale soon, does anybody know if there is any other adapters already fro sale? http://
-
after selection and entering , refine-edges, it just wont add or remove anything, brush or eraser, plus or minus dont seem to matter, nothing happens. I am a mac user btw. and using CS6. can anybody help with this?