Please help find driver, at the end of my rope with this ca

I purchased a used soundcard from a computer repair shop near here a few months back. The sound card did not come with an installation CD. So i was pretty much left on my own to find drivers for it. Ive got a good many years experience building pcs so i figured this wouldnt be a problem. How WRONG i was lol. After being unable to find drivers for it originally I finally gave up and put the card in a static protection bag i had laying around and havent thought about it much since then just counted it as a loss. Now im back at it trying again to find drivers to get this card to work.
The following is every bit of information i feel applicable to this sittuation, however if anymore infos needed please let me know and ill try to provide it.
My operating system= windows XP with SP2
The following is off the card itself. (which says its a creative sound blaster Li've!)
Theres an inkstamp on the uppper left hand corner of the non chipset side that reads
32AMN08B 853
94v-0 k
(backwards RJ looking symbol)e9697 3999
Serial number= m48309402990
Model number= CT4830
Steps i've taken so far are i originally went to the creative search function and looked for the drivers on their site it gave me a link to two files which i downloaded.
This is the link where i downloaded the following files
http://us.creative.com/support/downloads/download.asp?MainCategory=&nRegionFK=&nCountryFK=& nLanguageFK=&sOSName=Windows+XP&region=&Product_Na me=Li've%2&Product_ID=4857&modelnumber=&driverlang =033&OS=0&drivertype=0&x=26&y=
And this of course is the two files i got.
. Li'veDrvPack_Patch.exe
2. Li'veDrvUni-Pack(ENG).exe
File number one has a warning as follows:
(This is an update patch, it is not a complete driver installation. You must have the previous Li'veDrvPack.exe (SBLW-XPWEB-W3-US), posted July 7,2002. in your system if you wish to use this patch.)
Ive searched the site i cant find this file (SBLW-XPWEB-W3-US) after searching through the forums a bit i found this thread http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677&vie w=by_date_ascending&page=
Which had lists of ISOs for all the different installation CDs. I downloaded everything i seen on filefront (http://hosted.filefront.com/BadBoyforum) badboy had posted that had LIVE in the name. These include the following ISOs.
. SB Audigy & Li've!.iso
2. SB Li've! 5. (SB0228).iso
3. SB Li've! 5. (SB0229).iso
4. SB Li've! 24bit.iso
I mounted each image in daemon tools and attempted to install and recieved the following error
ERROR= Setup could not detect any sound blaster audio card on your system. Please ensure that your sound blaster hardware is properly installed before running this setup program. Setup will now exit.
Im kindve at a loss as how to proceed. Ive tryed looking through driverguide.com and a few other generic driver sites without much luck. If anybody at all has any suggestions on this id be very appreciati've. Like i said its a used card so it could be an OEM but it appears to be an ODM but who knows im by no means an expert on all this. I may have missed one of the LIVE isos off that filefront site but i dont think so. The only one i see thats left is the external one and its an internal card so i dont see how that could be right.

shadowcage wrote:
okay well i tryed the patching method on all of the isos i had after extracting them.
I patched it and it said it was successful. when i ran each successi've setup it still didnt detect any soundblaster hardware.
I also went to compaq and tryed a driver i found there without any luck. Im thinking at this point it is an OEM
Although i still dont understand how you got compaq from the model number, im going to continue looking around their site.
Maybe ill luck out but so far im about to the point im ready to throw this @#$%@%#@$@##@$#@$% thing away lol.
Im looking on driver guide now again. :Sighs This is so aggrivating Normally i wouldnt have bought a card without the drivers but
my wifes the one that got it and she didnt know. Oh well......
You can get the model information from here.
You can also try by installing kX drivers -> if kX package don't get installed, your card may have some problems.
kX Home pages - http://kxproject.lugosoft.com/index.php?skip=
kX support forum - http://www.driverheaven.net/forumdisplay.php?f=74
jutapa

Similar Messages

Please help, I'm at the end of my rope...

I got my 30gb video iPod a couple of months ago. Well, today I was running iPod restore and it got unplugged. Since that happened, my iPod can't be recognized by any USB port on my computer or on my friends mac. We've tried using different cables in case they were damaged and that didnt' work. My iPod does make the sound like it's trying to load something but it just keeps repeating and doesn't stop unless i plug it in or unplug it. Also, nothing shows up on the screen even if I reset it or try to put it into Disk Mode. Is there anything I can do or will I have got get it serviced?
XPS M1710 Windows XP Pro

Now I've got another problem with it. After I posted my original question here, I didn't touch my iPod again. Well it just made a horrible noise that sounded like two pieces of steel grinding against one another. It hasn't made a single sound since then and now it's completely cold. I fear the worst for my shiny companion...It seems that my only option now is to get it serviced but feel free to post anything that you may think will help.
R.I.P, little buddy.

I'm at the end of my rope with this thing!!

Just a quick overview,
I've had my 30G iPod for about 2 weeks now. At first I couldn't get iTunes to read the iPod and had all these other problems. Eventually, after trying all sorts of things, I would have to pull the cord out of the USB port because iTunes said there was no iPod connected, but the iPod read 'do not disconnect'. Grr..I've only done this about three times and I know it can damage it whatever, but I had no choice! Now, after I turn it off I always put it on hold, and when I'd later turn it back on again, usually it would automatically turn back on again, now it doesn't, I press any button like the booklet says to do to turn it on, but the apple icon always appears indicating its reset, it happens quite a lot, and when I turn it off, put it on hold, then take it off hold after its been reset, it turns on automatically like it should! However, I haven't had problems with iTunes lately, its all going smoothly, and so had my iPod, but only lately its been doing this freaky stuff!
Hopefully you guys can help me! I'm thinking about taking it back to the store.
Laura
Dell Windows XP

Even though you eject the IPOD from ITUnes it is still connected to windows. You have your IPOD set to run in disk mode and it has to be dismounted from the Windows Operating System correctly or you will lock it up eventually. Read this first:
Do Not Disconnect - http://docs.info.apple.com/article.html?artnum=61135
It may be an option to restore your IPOD to factory settings and reload all your stuff on to a clean IPOD drive. Read this:
Restoring IPOD to factory Settings - http://docs.info.apple.com/article.html?artnum=60983

Please help urgent Calculation at the end of alv report

Hi ..
It is necessary to define clearly col1 first record is 10 col2 first record is 20 ..
col1 second record is 15 col2 second record is 25 .
COL3 first value is 10 / 20 .
col3 second value is 15 / 25 .
This datas come from internal table .
When I add at the end for all columns it get wrong calculation or lets say I want to do like total col1 10+ 15 total col2 is 20+ 25 . Total column3 is would like to be 25 / 45 .
How can I insert a line which is doing this operation in my alv .

try this
first
DATA : SAT_EVENTS     TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = SAT_EVENTS[].
READ TABLE SAT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
    APPEND LS_EVENT TO SAT_EVENTS.
ENDIF.
READ TABLE SAT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
                         INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE 'END_OF_LIST' TO LS_EVENT-FORM.
    APPEND LS_EVENT TO SAT_EVENTS.
ENDIF.
form for end of list
FORM END_OF_LIST.
DATA: P_HEADER TYPE SLIS_T_LISTHEADER,
        PA_HEADER TYPE SLIS_LISTHEADER.
DATA: INFO(100).
info = <your calculated value for col3>
PA_HEADER-TYP = 'S'.
PA_HEADER-INFO = INFO.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    IT_LIST_COMMENTARY       = P_HEADER
I_LOGO                   =
     I_END_OF_LIST_GRID       = 'X'
ENDFORM.                    "END-OF-LIST
in REUSE_ALV_GRID_DISPLAY pass
IT_EVENTS = SAT_EVENTS[]
hope this will work
regards
Shiba dutta
Message was edited by:
        SHIBA DUTTA

Please Help: I cannot get the Airport Extreme settings right with AT&T DSL

AT&T Motorola 2210 DSL Modem.
I have tried both bridged on/off and different configurations on the Airport Extreme, but I cannot get online. I am out of ideas. I called AT&T tech support and because it's not one of their wireless routers, they wanted to charge me to troubleshoot, ridiculous.
Please help

If you find that the Double NAT setting will not allow the PS3 to connect correctly, your only other option is to change the configuration of the modem to either +PPP on the computer+ or +Bridge Mode+ and then configure the PPPoe service on the AirPort Extreme.
I assume that you have already set the modem up using the default IP address of 192.1681.254 (I think this is it). You'll need to locate the page to change the settings and it will probably have a red warning sign on it. Either PPP on the computer or Bridge Mode will work. Update to save settings.
Then under the Internet icon in AirPort Utility:
Connect Using = PPPoE
enter your user name (probably your email address with the service provider)
enter your password
Leave the Service Name area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings.
That will eliminate the Double NAT issue and the PS3 should get a clear indication. As I said, when you have the PPP connection on a device other than the modem, you may see an occasional drop and restart of your connection. That seems to be a fact of life with this type of setup.

At the end of my rope with recent upgrade

I just bought the recent upgrade it's 2.0.1. Anyways before I bought it and updated my ipod everything worked perfect. My favorite thing to do was sit outside on the ipod surfing the net. Well now that I updated it I can not get online. I can connect to my wifi which works no problem as I am on a computer right now using wifi but I can not access the net, youtube, itunes anything at all. If I am lucky I can load apple.com or gmail.com but that is it. If I click on a link it will not load another page. I have googled like no tomorrow to fix this and nothing has worked. Here is what I have tried.
- Reset by holding down home and power
- Taking off all applications I had downloaded and doing a complete restore putting the ipod back to factory settings and then syncing minus the apps as the apps and the 2.0.1 is the only things new on my ipod.
- I have tried messing with the settings under the connection on the ipod as suggested in some sites I found.
- I have tried changing my secruity settings on the modem, unplugged modem and reset modem even though modem has nothing to do with it since I still get online on my computer.
- I have tried forgetting network and refinding it, I have also tried renewing it.
I am so fed up. I want whatever was on it before 2.0.1 back since I could get on the internet then. I bought the ipod back in december so support will do nothing for me if I called them.
Please Help!! I am ready to throw the thing out the window.

I understand that you are trying to help. I came to realize that it must be a sig or something that automatically attaches at the end as it is no longer in more of the thread it is always at the bottom of the thread. I am so fed up with this stupid thing. I have tried everything it seems and everything mentioned in this thread. I got the IPod beside me to try each new suggestion. I can't go to an apple store as we do not have one here. I am ready to call apple and force them to deal with this in the morning. I got enough on plate I don't need this added stress even as minor as it is in the big picture.

At the end of my rope with phone support.

I'm not sure what anyone here can do, but I need somplace to share this with. Its extremely frusturating.
Less than a month ago, I purchased my first iMac. It was a slightly older model- a 20" Aluminum 2.0ghz machine. It was purchased from a re-seller and had obviously been sitting on the shelf for a while. I know that the warranty date starts from the purchase date of the re-seller; there is a form to fill out if it needs to be changed to your actual purchase date. In a situation like mine, where the computer had been in the store for around a year, this was essential if I wanted any kind of phone support.
I filled out these forms, faxed a copy of the receipt to the number I was supposed to, and assumed everything would be fine. Within 24 hours, Boot Camp managed to screw up the OS X partition of my hard drive. I needed to make several calls to customer support, where I had to argue with all of them due to the purchase date update taking up to 72 hours to go through. After several phone calls, where I had to explain my situation 15 times and wait on hold for 45 minutes while they found out that it takes 72 hours for the change to go through, and after literally 5 hours of driving to my nearest Apple stores until someone was willing to help me with the problem even though I was "out of warranty" (Reminder- I had purchased this computer 2 days prior. New, off the shelf in the store. It absolutely should've been under warranty.) I was finally able to get the computer fixed.
Today, I figured I'd check on the status of my purchase date switch, so the next time something goes wrong with my computer I don't have to battle with tech support to get them to listen to my problem. I entered the serial number in the warranty info page, and it tells me:
*Our records indicate that your product is covered under a custom contract. For more information about your coverage, please contact us.*
*Your product is not eligible for complimentary phone support.*
When I click "contact us," the only thing that would be able to potentially help me out is the Apple Customer Service phone number. I don't feel like calling and having someone with a medium-thick accent repeat back to me what they understood my issue to be 5 times until they finally get it right. I would love to write it out so someone can just re-read it if they don't wrap their mind around it the first time.
I don't see why I should have to argue my case. I went to an Apple Authorized Reseller, swiped my credit card, and walked out with a new iMac. No, it's not the newest model, but its still new. That's money that just went in Apple's pocket, because of my purchase. There is absolutely no reason why it should be this big of a struggle just to get the warranty that I deserve. I don't feel like I'm being unreasonable or out of line in any way.
Does anyone know who I can EMAIL about this, or am I going to have to put up with the non-help I get on the phone? They're going to tell me that they can't help me out, because I'm supposedly not covered for phone support anymore. Ugh. Please help.

I'm not sure what anyone here can do
Nothing. These are user to user forums, of which Apple employees do not take part in.
Does anyone know who I can EMAIL about this,
Nobody...Apple does not offer email support/correspondence. Call support and ask immediately to speak to customer relations.

Can anyone help, i am at the end of my rope.=(

I recently purchased the Linksys EA3500 and cannot get my port to open. I set up "single port forwarding" correctly i hope but when i ask my "check port tool" to check the port, it always shows a ip that i dont even know. I run on lan (home) and my wife runs hers on Wifi thro the same router. I did the cmd...ipconfig /all thing, entered the IPv4 ip, the subnet and the DNS but no matter what i do, the site keeps telling me when they go to check my router for open port, they were "Refused" So any help with this

Hey, I hope I am not too late.
In order for your port forwarding to work, you have to point it to the IP address of your router. On the setup page, about the middle of the page, there is a 192.168.1. then a box; place a value in the box, which will complete the ip for your router's port forwarding.
save it then, try again. Just did that on mine, I found alot of information on the www.portforward.com web site.

6.0.5.20, at the end of my rope

I installed 6.0.5.20 and it has not allowed my 5G or Nano to connect to iTunes. All I get is the message: "The software required for communicating with the iPod is not istalled correctly. Please reistall iTunes to install the iPod's software."
I've tried reinstalling it. I've tried removing and reinstalling it, I've tried the McAfee firewall (it has full access to iTunes), I've tried the Quicktime standalone install, I've tried the MSCONFIG setting, I've tried removing iPod updater 2006-28-06, I've tried sending an e-mail to Apple. I can't restore my iPod, because now I get an "iPod service error" when I try to run any updater, new or old. Absolutely nothing has worked.
Does anyone have any ideas? I'm at the end of my rope with this.
Windows XP
5G and 4GB Nano Windows XP

Ok, I solved my problem. Here's what I did: I went through all the steps in the article linked above and nothing seemed to work. Part of those steps has you remove iPod stuff from your computer. I would follow the steps for "Removing iTunes." From what I could figure out, it was the iPodService.exe that was causing my problem because it would never show up under the "Processes" menu in the Task Manager. I downloaded version 6.0.4 from oldapps.com. Then I reloaded my iPod software from the CD that came in the box, my Nano had iPod update 3-26-06 on it. When I opened iTunes, everything worked fine. My God it took forever to get that done. I've been working on this for a week.
5G and 4GB Nano Windows XP

Can anybody help me to build an interface that can work with this code

please help me to build an interface that can work with this code
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
public class Translate
public static void main(String [] args) throws IOException
if (args.length != 2)
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
HashMap map = null;
try
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null)
String[] fields = line.split("
t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
finally
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
StringBuffer out = null;
try
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null )
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
finally
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text)
Iterator it = words.keySet().iterator();
while( it.hasNext() )
String key = (String)it.next();
text = text.replaceAll("\\b"key"
b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello               ahoy
hi                    yo-ho-ho
pardon me       avast
excuse me       arrr
yes                 aye
my                 me
friend             me bucko
sir                  matey
madam           proud beauty
miss comely    wench
where             whar
is                    be
are                  be
am                  be
the                  th'
you                 ye
your                yer
tell                be tellin'

please help me i don t know how to go about this.my teacher ask me to build an interface that work with the code .
Here is the interface i just build
import java.util.Map;
import java.util.HashMap;
import java.util.Iterator;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.BufferedReader;
import java.io.FileReader;
import java.awt.*;
import javax.swing.*;
public class boy extends JFrame
JTextArea englishtxt;
JLabel head,privatetxtwords;
JButton translateengtoprivatewords;
Container c1;
public boy()
        super("HAKIMADE");
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setBackground(Color.white);
        setLocationRelativeTo(null);
        c1 = getContentPane();
         head = new JLabel(" English to private talk Translator");
         englishtxt = new JTextArea("Type your text here", 10,50);
         translateengtoprivatewords = new JButton("Translate");
         privatetxtwords = new JLabel();
        JPanel headlabel = new JPanel();
        headlabel.setLayout(new FlowLayout(FlowLayout.CENTER));
        headlabel.add(head);
        JPanel englishtxtpanel = new JPanel();
        englishtxtpanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,40));
        englishtxtpanel.add(englishtxt);
         JPanel panel1 = new JPanel();
         panel1.setLayout(new BorderLayout());
         panel1.add(headlabel,BorderLayout.NORTH);
         panel1.add(englishtxtpanel,BorderLayout.CENTER);
        JPanel translateengtoprivatewordspanel = new JPanel();
        translateengtoprivatewordspanel.setLayout(new FlowLayout(FlowLayout.CENTER,10,40));
        translateengtoprivatewordspanel.add(translateengtoprivatewords);
         JPanel panel2 = new JPanel();
         panel2.setLayout(new BorderLayout());
         panel2.add(translateengtoprivatewordspanel,BorderLayout.NORTH);
         panel2.add(privatetxtwords,BorderLayout.CENTER);
         JPanel mainpanel = new JPanel();
         mainpanel.setLayout(new BorderLayout());
         mainpanel.add(panel1,BorderLayout.NORTH);
         mainpanel.add(panel2,BorderLayout.CENTER);
         c1.add(panel1, BorderLayout.NORTH);
         c1.add(panel2);
public static void main(final String args[])
        boy mp = new boy();
         mp.setVisible(true);
}..............here is the code,please make this interface work with the code
public class Translate
public static void main(String [] args) throws IOException
if (args.length != 2)
System.err.println("usage: Translate wordmapfile textfile");
System.exit(1);
try
HashMap words = ReadHashMapFromFile(args[0]);
System.out.println(ProcessFile(words, args[1]));
catch (Exception e)
e.printStackTrace();
// static helper methods
* Reads a file into a HashMap. The file should contain lines of the format
* "key\tvalue\n"
* @returns a hashmap of the given file
@SuppressWarnings("unchecked")
private static HashMap ReadHashMapFromFile(String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
HashMap map = null;
try
in = new BufferedReader(new FileReader(filename));
String line;
map = new HashMap();
while ((line = in.readLine()) != null)
String[] fields = line.split("
t", 2);
if (fields.length != 2) continue; //just ignore "invalid" lines
map.put(fields[0], fields[1]);
finally
if(in!=null) in.close(); //may throw IOException
return(map); //returning a reference to local variable is safe in java (unlike C/C++)
* Process the given file
* @returns String contains the whole file.
private static String ProcessFile(Map words, String filename) throws FileNotFoundException, IOException
BufferedReader in = null;
StringBuffer out = null;
try
in = new BufferedReader(new FileReader(filename));
out = new StringBuffer();
String line = null;
while( (line=in.readLine()) != null )
out.append(SearchAndReplaceWordsInText(words, line)+"\n");
finally
if(in!=null) in.close(); //may throw IOException
return out.toString();
* Replaces all occurrences in text of each key in words with it's value.
* @returns String
private static String SearchAndReplaceWordsInText(Map words, String text)
Iterator it = words.keySet().iterator();
while( it.hasNext() )
String key = (String)it.next();
text = text.replaceAll("\\b"key"
b", (String)words.get(key));
return text;
* @returns: s with the first letter capitalized
String capitalize(String s)
return s.substring(0,0).toUpperCase() + s.substring(1);
}... here's the head of my pirate_words_map.txt
hello               ahoy
hi                    yo-ho-ho
pardon me       avast
excuse me       arrr
yes                 aye
my                 me
friend             me bucko
sir                  matey
madam           proud beauty
miss comely    wench
where             whar
is                    be
are                  be
am                  be
the                  th'
you                 ye
your                yer
tell                be tellin'

HT203167 I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't rep

I bought the app peru tv in march. Sometimes it stays idle when downloading a tv channel so I ended up deleting the app and reinstalling it. Today I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't replied regarding problems with channels and lost app

In order to properly upgrade the OS of your Mac. 10.1 Puma is really old. Your Mac has to meet the tech specs for Lion: And it would probably need to be a clean install. If you recently purchased Lion. Call Apple Care CPU and ask them to be sure. You get 90 days Free of phone support. 1-800-275-2273
Apple - OS X Lion - Technical specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

Please help find the program

Please help find the program to block unwanted number, call and SMS, that not all block number ,but the number on which you want to.

Which part of "The 5310 is just a java phone that cannot support applications like this." did you not understand?
If you want to achieve any form of blocking at all, it won't be with that phone. Your operator may be able to help by putting a block in place on their end, though, but I doubt it.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

HT201272 Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

Is the app still in your country's store (if it isn't then you won't be able to redownload it), you haven't changed countries since buying it (content is tied to the country as well as the account), and it isn't hidden : http://support.apple.com/kb/HT4919 ?
If the app is no longer in your country's store then do you have a copy of it on your computer's iTunes library and/or on your backup of your downloads/library ?

TS1424 Hy. Please help me. what's the problem? when i accessing icloud or find my friend app: The maximum number of free accounts have been activated on this iPhone.

Hy. please help me. what's the problem? when i accessing icloud or find my friend:The maximum number of free accounts have been activated on this iPhone.

Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

HT5624 Please help find the IMEI number Please? My Iphone was stolen AIS network (Thailand)

Please help find the IMEI number
By email:
Please?
My Iphone was stolen
Call
AIS network
(Thailand)
thank you very much
<Personal Information Edited by Host>

http://support.apple.com/kb/HT1267
Regards.

Please help find driver, at the end of my rope with this ca

Similar Messages

Maybe you are looking for