PLEASE HELP... Flash Audio Scratchy w/ latest player 9.0 r115
I'm using Firefox on XP. The red flash audio button on my web
page plays the audio, but it is very scratchy (see sample at:
www.BizSplash.com/sample).
This appears to have happened since I upgraded to the latest
flash player 9.0.115. The audio plays fine on my other computer
with an earlier release of the 9.0 flash player.
How can this be corrected please? The audio quality is
terrible all of a sudden. It has been working fine for years before
this new flash player came out.
Thanks for any help you can give,
DSP
I suspect this is a Yahoo problem. They'll need to update
their Flash Plaeyr detection. I wrote about it yesterday in several
threads on this forum, and in my blog at
http://bentimagemedia.com/.
You should contact them immediately and let them know.
I ran a quick test and I had no problem using chat in FireFox
with the FP10 plugin. It only failed when I tried it in IE6 with
the FP10 ActiveX control (see below). Make a note of this when you
contact yahoo.
In the meantime, I'll see if we have any connections at yahoo
that we can ping on our side..
<<PS: Please note that I also have 'Adobe Flash Player
9 ActiveX' installed as I use Firefox 3.0.3 on a Windows XP SP3
system and sometimes some website components don't function without
this ActiveX software.>>
This is incorrect. The Flash Player ActiveX control is only
used with IE Windows. All other browsers and platforms use the
Flash Player plugin.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe
Similar Messages
-
Please Help, Flash Player for Mac
I am running Mac OS X 10.7.5. Last night Facebook told me I MUST update to the newest version of Flash Player in order to upload multiple pics. I kept getting plug-in failure messages and then the message saying I need to update my version of Flash.
Problem is I have updated my version of Flash and the plug in still doesn't work. Please help, my business relies on my being able to upload multiple photos daily to social media. What is going on? I have read the forums, the work arounds posted on 4/16. Uninstalled, re-installed, etc. I am still getting flash plug in failures even on Adobe's site. What do I do?No.
I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine. -
PLEASE HELP flashing light and playbook doesn't switch on!!
Hello,
I have my tablet won't switch on and when I try to turn on, the red light and green light flashing 5 times. And then nothing. Unable to turn on.
I tried a reboot by pressing power + volume - and nothing!
I tried to update with BlackBerry Desktop Manager (latest version) and when the update reaches the end error message comes to me and it there was a problem: "A connection to the tablet Could not be ESTABLISHED. Please connect your tablet and try again. "
I also tried to charge it with a 2000mA charger for several hours and still nothing.
I no longer guarantee
Please help me, I do not know what to do.
thank you
sorry for my englishSame thing happened to me yesterday. After the error message, I plugged in the charger. It took quite a while but the tablet started charging. It reinstalled the update when it reached the 20% level. Another update error came up to change my setting. I checked my setting but didn't change anything and just reinstall update again which this time was a success. Hope this would help.
-
Please help--flash 9 wont download
I am slowly realizing that there are a lot of things that
require Flash Player 9. I have tried at least 15 times to install
this, but everytime it pops up the security box, i click install,
and the 'F' comes up with the spiral underneath. It goes away, the
security box reappears, i click install, and the little boz where
the 'F' was is empty, then it goes away, turning to quotation
marks. Why wont it work? i am on my acocunt with administrative
rights....please help! Thank youfirst, if your not using firefox, got to mozilla.com and get
firefox. it the best browser there is and the add-ons that you can
get to enhance it are the bomb. Next time you come across something
that requires flash it will automaticlly download it. -
PLEASE HELP-Flash Version 9.0
Everything was working fine this morning. I went to the
Playhouse disney.com website for my sons. It said I needed to
update my flash player. I downloaded 9.0 for MAC powerPC (I have
version 10.5). The download did not finish, stating I needed a
different plugin. It redirected me back to the same page for
downloading 9.0. I did the uninstall flash player. It said it
worked. I tried to install 9.0 again. Now, it said that I don't
have permission to access the installer. What do I do? If anyone
could please help me, I would really appreciate it!!!
This is the error message I get- 1008:5-5000 Denied Access
ErrorHi oneksrose,
Send me a Private message with your fullname, email and phone
number and I'll open a case for you and get this resolved.
"Send Private Message" is on the left panel under my user
name. I look forward to hearing from you.
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support. -
PLEASE HELP!! Cannot install latest version of iTunes!
I know there are loads of questions on a similar theme but I am completely NOT technical and I find them really hard to follow. I use Windows 7 and until now I have had no problems with iTunes. I was bought a new iPod Nano and I couldn't use it until I had updated to the latest version of iTunes. When I tried to do this it wouldn't let me, I just got an error message. I have subsequently backed up my iTunes library, uninstalled iTunes and tried to install the latest version, I get the same error message:
An error message occurred during the installation of assembly ‘Microsoft. VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b3b9a1e18e3b ”.processorArchitecture=”x86’”. Please refer to Help and Support for more information. HRESULT: 0x80070002
I'm completely stuck now, can't even use my old iPod as I have no iTunes. I'm sure you're going to tell me to look in Windows Update - I did this but didn't have a clue what to do with that I found there! This is SO frustrating, I wish I'd just stuck with my old iPod.
Please help!Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour and QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
Please help (flash intro cs4)!!!
sorry if I posted in the wrong section but I need help.
I have a flash intro and when ever I preview it,the intro background turns to black instead of staying the way it should be.Can somebody please help me out here,I need this flash intro for a website.Please explain this to me in simple terms because im pretty NEW to adobe.
Thanks
Kevin
Note I've tried everything to make the flash background stay the way it was but nothing I do works.the color is black
watch this intro
http://images.templatemonster.com/screenshots/21000/21016.html
i have this intro. I open it in flash and play it. As soon as the Offbeat idea text goes away the background fades to black instead of staying consistent. -
PLEASE HELP with Audio for YouTube!
Hi,
I KNOW YouTube is not the best for quality, but I absolutely HAVE TO post a couple of videos there!
So.... having used Standard footage & the regular preset for DV-shot footage, does anyone KNOW which Encoding conversion to use (and I assume bitrate selection as well) that will allow me to post them on YouTube and actually hear something which even resembles the professionally Mastered recordings I am using. So far I have tried WMV, h264 & a few others with various bitrates and most all of them sound horrible once YT converts them. I was fine with the WMV video but the audio is way to disgusting to even listen to (especially compared to what the audio actually really is). I have read some posts here suggesting FLV, WMV, etc, & I am truly at a loss and in major need of help here. I have read Eddie's article link, & still the audio once YT does "it's thing" is ridiculous!
The audio sounds great (good enough) on my computer after Encoder does its thing, but if anyone has encountered this and has the answer....PLEASE - what conversion & WHAT BITRATE should I use to make YT NOT ruin my recordings (and sound good on there)?!?!
I even considered importing an already converted AAC or mp3 audio file into Pro, & then exporting it via Media Encoder but don't even think that's possible (or necessary).
Please help as I HAVE to post it on YT yesterday already!
As always, thank you for you help!!I never really had problems with sound quality on youtube...but I just use stereo pcm/wav mostly in editor. I think you should post what your using in your project and what you are exporting it as...cause its too vague to really give much specific advice re: helping you. also, say whether you have any sound codec packs or anything loaded...anything other than the original program codecs...and say what version of the product you are using...premiere pro what ??
-
Please Help, Flash CS.6 Won't startup
I Downloaded and Installed Flash and i Tried to run it but it keeps giving me this message
" the procedure entry point ?_Xruntime_error@std@@YAXPBD@Z could not be located in the dynamic link linrary C;programFiles/Adobe/Adobe Flash CS6/boost_filesystem.dll"
I tried to fix it but i couldn't get anywhere. Please help me. I need it for work in 3 days. please helpPlease see the notice at http://forums.adobe.com/community/robohelp/robohelp_flash
Right question, wrong place.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Please Help - flash Intro how to link to nex page
HI there
The end of the flash intro, i have one link on the bottom (
skip intro)
I want th end of flash intro, it will automatic link to next
page ( mai.htm) without click any link or.....
Please help
Thank you
GraceHi
Add this code to the last frame of your intro:
getURL ("yourlink.html"); -
Please help with audio and video not syncing.
I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
MarkHi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help. -
Flip4mac problem maybe please help no audio
so i tried to veiw video on the internet "plugin not available" then i remembered that i had installed flip4mac on my powerpc mac to allow it to see those files,,, so i tried it on my mbp it's the version that says it works with mbp but now i can see the videos but no audio,,, i tried alot of different videos and i get no audio anywhere, just to check that it wasn't safari i played the apple commercial videos,, those get audio great,,, but no audio with mpg, or myspace music, or anything,, please please help
ps,, i tried to find an older version of it to see if that would work,, but i couldn't find the older download,,, can i drag and drop from my ppc?you don't want an older version of Flip4Mac - as the new 2.1 release is the only Universal Binary created to work correctly for you.
What you may want to first do, though annoying, is to reinstall Flip4Mac.
Before doing so, be sure to go to System Prefs --> Flip4Mac to make sure all of your settings are correct.
try playing with all of the features on the "plugin" menu and see what happens. -
Hello please help me! I updated the itunes on my desktop and once I plugged up my phone it automatically started restoring my phone now all my info, contact, pics, and videos are gone.
Restore your iTunes or iCloud backup to your device: iOS: Back up and restore your iOS device with iCloud or ...
If you do not have an available backup, then your data is lost permanently. Start over. The good news is that any iTunes or App Store purchases can be redownloaded by using your Apple ID that was used to purchase/download the content. -
Please help, flash and wix...
Hi all, I am having problems updating my wix websites and wix are telling me this is due to a recent upgrade of flash player.. they are telling me that I need to have flash player version 10.2.153 or 10.2.154 while my computer is running 10.2.159 and I cannot find the others versions for download anywhere. I am totally lost with all of this stuff so please excuse me if I have confused anyone!
I would really appreciate any help that anyone can give me with this.
Cheers
SueThank you for your help! It seems that I have the problem fixed now.. and I agree with what was said regarding WIX.. it's most frustrating bu I believe it has something to do with the latest upgrade to the flash player.
Cheers -
URGENT Please help flash 8 components
I have written a .exe application that has a email submission
form at the end, the form is built up of flash 8 components. The
component ids are as follows:
fname.text;
femail.text;
fmessage.text;
fcountry.text;
fsubject.text;
On my submit code i have passed the fields using this method
fname = fname.text;
femail = femail.text;
fmessage = fmessage.text;
fcountry = fcountry.text;
fsubject = fsubject.text;
This is perfect and works first time no problems. My problem
is becasue the flash .exe never closes the component id's are stuck
at the last setting which is i.e. fname = fname.text; when the form
comes round again it doesnt work becasue its stuck at fname =
fname.text;
I need to tell the flash program to forget this after i have
submitted it and return it to fname.text = fname.text;
Please can you help, i'm pulling hair now and ive got a
deadline to sort this out :/
If the swf was on a webpage this wouldnt be a problem becasue
the swf gets loaded each time the page is refershed, but becasue
it's a .exe and never gets closed its stuck this way after being
run first.Nope ive tried all sorts
fname.text = fname.text doesnt work, its becasue fname.text
no longer exists its now fname, i need to set it back after submit.
I really need to get this working or i'm dead meat!
This is my submit code:
butt_send.onRelease = function() {
fname = femail.text
femail = femail.text;
fmessage = fmessage.text;
fcountry = fcountry.text;
fsubject = fsubject.text;
loadVariablesNum(form1, 0, "POST");
gotoAndPlay("home");
Maybe you are looking for
-
Hi Friends, When we create an invoice with respect to delivery using standard copy control the partner function thats appear in the header is bill to party and payer. I want the ship to party also to appear in the partner function at header level. Th
-
Error while using select in decode
i am trying following which is giving me error , can anybody suggest. select 1 from emp e where e.qty > decode(e.code,'70',(select x.qty from QUANT q, EMP e where q.qty=e.qty) ,'40',(select 100 from dual)); error Encountered the symbol "x" when expec
-
what about if you have added a rescue email address and verifyed it and the i forgot my security questions still doesnt show up and i dont no the answers !?!?!?!?!?!?!?! what do i do then because i dont want to phone up !?!?!?! please help !!??!?!?!
-
Block the system for GR against po and inboiund delivery
Hi Gurus, can anybody please tell me is there a way in the system where we can block the GR against PO if there is an inbound delivery cretaed against that PO. so if the PO has an inbound delivery created in the confirmations tab, then during GR the
-
I ordered a photo book from iPhoto
I was charged shipping even thought the website says that everything ships free for Christmas. How can i fix this?