Please Help - Flash Image Viewer

I read other posts with the same problem but no solution was
offered, so I try to get some answers this way.
I have a slide show with 5 images (
http://www.interweb39.com) .
The size of the image area is defined as 400x300. The images are
400x300. The "place holder" shows that size. But when the slideshow
is played (tested in different browsers) or uploaded to the site,
the images are smaller. There is an area around the images that is
not visible in design mode. I set the IW background to be the same
as my page background, so it is not ugly, but the picture size is
reduced!
Thanks for your help
Marianne

Meanwhile I have used a different software that works.
Marianne

Similar Messages

Help with Dreamweaver flash image viewer

Hi all
Would like some help with Dreamweavers Flash image viewer.
Everything is working properly except when i try to link a picture, and have set the imagelinkTarget value to _blank the link always navigates away from my site and does not open in a new window.
I have tried all the values for the imageLinkTarget and nothing works..
Here is my code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0','width','190','height','190','src','images/ad1','quality','high','flashvar s','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',sh owCo ntrols:false,frameShow:false,slideDelay:5,captionSize:14,captionColor:#000000,ti tleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageU RLs:[\'images/image1.jpg\',\'images/image2.jpg\',\'images/image3.jpg\',\'images/ image4.jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'http://www.bowlsaustralia.com.au\',\'http://www.smh.com.au\'],frameColor:#333333,bgColor:# FF9966,imageCaptions:[\'Bowls Australia\',\'Sydney Morning Herald\']}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash','flash_component','ImageViewer.swc','movie','images/ad1' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0" width="190" height="190">
          <param name="flash_component" value="ImageViewer.swc" />
          <param name="movie" value="images/ad1.swf" />
          <param name="quality" value="high" />
          <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verd ana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionColor :#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tr ue,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','image s/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" />
          <embed src="images/ad1.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:' Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionC olor:#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPla y:true,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','i mages/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash" type="application/x-shockwave-flash" width="190" height="190"> </embed>
        </object>
</noscript>
any help would be greatly appericated
Ken

I just googled and found lots of folks with the same problem. One fellow wrote this as a soluton:
"All you have to do is
remove the values from the imageLinks in the flash element. That
should fix it."
Does it?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Flash image viewer, picture scale problem in CS3

Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
Thank you for your efforts,
Tibor

function(){return A.apply(null,[this].concat($A(arguments)))}
serestibi wrote:
Please someone help me. I have built a website 3 years ago, and I still have this problem. In CS3 I added a flash image viewer (slideshow.swf) as a slideshow to show gardens we have made. When you first visit the site and look at the pictures (wich are bigger than the viewer window because of picture quality issues) they don`t shrink to fit into the viewer window, you only end up seeing a fraction of them. But when they download and you go back to see them again a second later, they become the right size. It also swiches to the right size when the loop play gets back to the first pic again.
In the flash element properties I tried the different scale settings, and looked at other settings too but I couldn`t make it work.
I think making the viewer window as large as the pictures, would look odd. Maybe buying on other slideshow program to insert into dreamweaver would work.
If you would like to see the site its: tsugagardens.com , than look in the photo gallery and after the pics download go back with the back button and see the difference in the pics.
Thank you for your efforts,
Tibor
Here is the code for the image viewer

Why does my flash image viewer look different in firefox than in IE...

So I have created a horizontal spry bar that overlaps a flash image viewer slide show. When i load the page in IE everything works fine, but as soon as you open it in firefox it works improperly...you can hit refresh in firefox and sometimes it resizes the image I don't understand how that is possible....if you have any input it would be greatly appreciated! Thank you!

You need to be aware of the limitations of the various browsers and make sure you use web-safe fonts and colors.....
http://www.iwebformusicians.com/WebMusic/FontsandColors.html
Do a Command A on all your pages in iWeb to make sure that objects/text boxes are not touching or overlapping.
Firefox has problems with displaying drop shadows/frames etc.
To get help with specific issues you would need to tell us the URL of our site.

My Flash Image viewer won't flush left on Windows

I created a Flash image viewer file in Dreamwever and put it
into a table cell and it seems to go flush left on the Mac, but
flushes right on Windows browsers, I have the cell set to flush
left. Can anyone help me with this?

Okay what I do is this. I want to insert a Flash collection of images, one changing to the other. I go to insert, then Flash then image viewer and the Flash image appears where my cursor is, and then my FLash editor appears on the right hand side, and I drop images into it, using the + key, taking them from the images in the foler for the web site. File size of the images are fine I think, all less than a 100k in size. Whe I press play or preview in the web browser, it just flashes once and is displayed as white . No images appear or anything.. I cannot upload to a live site at the moment unfortunatley. I can make take a photo of the screen if you want so you can see it?? Let me know.

How to upload a HTML page with Flash image viewer?

I´ve got a html page with a flash image viewer file inn it. Preview in a browser is ok, but I don´t get it right on the server. Is it something spesial with the swf file?
This is what i have done: I just upload html -page, viewer swf file and the pictures to the same folder. Is this wrong?
Sorry, I really don´t have a clue... Thanks!

Sorry to say, but that is not a webpage -
There is no doctype, no head section, no body section .
etc. etc.
Nothing would work in that document.
Please generate a properly formed HTML page, and place the scripts and script calls in the proper section and the rest in the body, and let's see what you get

Flash Image Viewer

I am creating a page in DW8 and have inserted an instance of
the Flash Image Viewer though despite changing the parameters in
the Tag Inspector and the Flash Element pane to say that the
controls should not be visible - they are and the pictures do not
show when I preview the page in the browser (IE7). I have created
on another page previously in another site where this works
perfectly. Can anyone make any suggestions?
The other odd thing is that when I preview in Opera or
Mozilla Firefox, they work. The same when I publish.
Working site =
http://www.fontanadesign.co.uk/hotel/double.html
Non-working site =
http://www.fontanadesign.co.uk/harmony
Any suggestions gratefully received.
Stevie

Please, first make a difference:
Are you trying to display a JPG file or a Flash
Video/animation ?
When you are designing the web site, you choose which one you
are going to insert on the page: In this sense: is you need to put
a Flash File, go to: Insert / Media / Flash and then choose the
file you are going to insert in DW.
On the other hand, If it's a JPG file you insert in a
different manner: select: Insert / Image , and then choose the JPG
file.
Rememer that the same path you are giving to the files (JPG
or Flash) is going to be claimed by the server, so create the same
directories containing the same names, in your hard drive and on
the server.
To finish it, it doesn't matter if you have the Flash
program. You only need the Flash Reader, but it has to be the same
version as the file you are using (it is much better, not totally
necesary).
Well, hope it will be usefull, best regards

Please help (flash intro cs4)!!!

sorry if I posted in the wrong section but I need help.
I have a flash intro and when ever I preview it,the intro background turns to black instead of staying the way it should be.Can somebody please help me out here,I need this flash intro for a website.Please explain this to me in simple terms because im pretty NEW to adobe.
Thanks
Kevin
Note I've tried everything to make the flash background stay the way it was but nothing I do works.

the color is black
watch this intro
http://images.templatemonster.com/screenshots/21000/21016.html
i have this intro. I open it in flash and play it. As soon as the Offbeat idea text goes away the background fades to black instead of staying consistent.

PLEASE HELP flashing light and playbook doesn't switch on!!

Hello,
I have my tablet won't switch on and when I try to turn on, the red light and green light flashing 5 times. And then nothing. Unable to turn on.
I tried a reboot by pressing power + volume - and nothing!
I tried to update with BlackBerry Desktop Manager (latest version) and when the update reaches the end error message comes to me and it there was a problem: "A connection to the tablet Could not be ESTABLISHED. Please connect your tablet and try again. "
I also tried to charge it with a 2000mA charger for several hours and still nothing.
I no longer guarantee
Please help me, I do not know what to do.
thank you
sorry for my english

Same thing happened to me yesterday. After the error message, I plugged in the charger. It took quite a while but the tablet started charging. It reinstalled the update when it reached the 20% level. Another update error came up to change my setting. I checked my setting but didn't change anything and just reinstall update again which this time was a success. Hope this would help.

Flash image viewer works in preview but not online

Hi
I followed an online demo on how to get an image slideshow on my webpage using flash. It was using insert media image viewer. It all worked fine, looked great in the preview but when I put everything online I can't see it. Just an empty space were it should be. This is the site where it is
http://www.idoityourself.com.au/ if tried moving the image to different areas in case it didn't like being in a folder within a folder etc but still didnt work. Any ideas??
thanks

http://www.idoityourself.com.au/Scripts/AC_RunActiveContent.js File not found.
You have not uploaded the Scripts folder to your server which DW generated automatically for you when you inserted the Flash.

Please help about Custom View fo EditorKit

Thank You for reply
TextArea in Visual Studio .NET is somehow displayed like that.
- public class Test{
|
| + public Test(){
| | ....
| _ }
|
| + public int load(){
| | ......
| _ }
|
and if u press + symbol, method code is displayed.
thats why i want to customized EditorKit's Views
Please Help Me....
Thanks..

Thank You for reply
TextArea in Visual Studio .NET is somehow displayed like that.
- public class Test{
|
| + public Test(){
| | ....
| _ }
|
| + public int load(){
| | ......
| _ }
|
and if u press + symbol, method code is displayed.
thats why i want to customized EditorKit's Views
Please Help Me....
Thanks..

Flash Image Viewer captions won't appear entirely

I am trying to insert an image viewer on a page to display
some pictures with captions below each one. When I insert the
images and text with the image viewer's default settings (colors,
text size, etc.) all the text appears. If I change any of the
settings (such as background to black, font color to blue, font
size, etc.), only 10 characters of the text appears for the first
image and the second image's caption doesn't appear at all. I've
resized the image viewer to make it larger and allow for more room
for the caption at the bottom. I've also inserted a smaller image.
I've deleted and recreated the entire object. I've created the
viewer on a different page with and without CSS formatting.
The most bizarre thing to me is that on the exact same page
with the same formatting, I could get the captions to appear in
their entirety. This makes me know it will work. I just don't know
what could have inadvertently changed. Is there some text length
modifier that limits the amount of the caption which will appear? I
have tried to change almost everything that appears for the
viewer's properties and nothing will solve the problem.
Thanks for any help or advice!

I read a site about the image viewer (resources on the web
are limited on this subject). Should I disable the frame border?
Should I ensure the image size matches the image viewer's size?
Even if I make those changes, it doesn't make sense to me how the
captions appear when I leave the viewer's properties at their
default settings and if I change anything (even colors), the
captions disappear.
Any help is greatly appreciated!

PLEASE HELP, SOMEONE REMOTELY VIEWING/SCREEN SHARING MY MACBOOK?

Hi - I urgently need help from anyone who knows about this issue - I am a very basic macbook user, and don't really know about all the different programmes etc. I believe someone ( the guy who sold me the macbook, who told me he was a mac repair person and programmer) has been hacking into the computer, using the remote access - there is a programmed called SCREEN SHARING but I cannot access it - and a bunch of other files such as odsagent etc - not sure if these indicate he is using the screen sharing/ remote access to my mac.
The reason that I believe he is accessing the mac, is that he downloaded all the files, so would clearly have access to passwords etc, there were loads of his old files, that showed pictures of people saying " target", and old files showing he was studying comuter/ mac programming. The first time I went online all of a sudden the computer froze, and two green lights showed on the num lock key and the shift key I think, the two keys were frozen, and the keyboard basically wouldnt respond, but the activity continued on the screen. This has happened a number of times since then, usually just randomly the keyboard freezes, and if you wait a while it goes back to normal - the mouse works fine, then one day it keep sort of freezing/ getting stuck/ pausing for no reason - the next day its fine again. He put in a load of software, which he has obviously been able to get round the need of liscening numbers, as he did not provide me with them. one day I saw a name "macbook pro" suddenly appear, and that it was tryin to connect/ share or something - this has never happened to me before with my old mac- it was like another computer was connecting/ sharing with my computer without my permission - this was when I was online. This has not happened since.
I am scared he is accessing the computer, because these things that happened, and because there is loads and loads of files and programmes, which sound suspicious, i dont know what they do, and I just have this dogey feeling about this guy, and the fact that there is screen viewing/ remote management files etc which I cant access, but I am not sure if they are being accessed.
PLEASE HELP - I FEEL LIKE MY PRIVACY IS BEING INVADED - I was speaking to my family on Skype and the green lights came on/ it froze, I continued with the conversation, but later I felt like he might have been watching.
If anyone can recommend an expert in the London area, that can check the mac to see there is nothing on there that is being used to remotely control/ screen share my mac, I would be very grateful - its just horrible using your computer, and always being worried someone is invading your privacy, and and downloading your files etc.
Sorry if I sould paranoid, but I have a strong feeling something is not right here.
Many thanks for your help in advance.

Since you don't know much about computers, disconnect your internet (wireless or wired) to prevent future unwanted access. While it is smart to contact Apple Communities, this is a criminal matter and you should consider taking the matter to the police. People like this will not stop with you. You need to list the private data that may be stolen and take action (cancel credit cards, change passwords, bank accounts, phone numbers, whatever you have cause to be worried about). If you can afford it, buy a new hard drive, remove the old one, and install OS X from scratch. Give your old hard drive to the cops. Make sure you turn the Firewall on (click the Apple up on the toolbar top left > System Preferences > Security) and uncheck any "Sharing" options (System Prefernces > Sharing). This event you are experiencing is unfortunate, and rare, but with a pro-active attitude you will come through it fine - and wiser.
EDIT
dgambler is right in that by purchasing a Snow Leopard disk (presuming you don't already have one) and performing a fresh install (it is easy) is a sure way to "take back" the controls of your Mac. You will need to study online tutorials for "wiping the drive" rather than a simple install. But you should let the police look at the hard drive before you do that - they will be able to see exactly what this person did.
usefull information:
http://docs.info.apple.com/article.html?path=mac/10.4/en/mh294.html
http://lowendmac.com/ed/rosen/mac-remote-control.html

Please help - Dreamweaver Image Map Tool/Outlook for Mac

Hello:
I was wondering if you could help me navigate through an issue I am having with the image map tool. I have created a design file is PSD, saved it as a JPG, then transferred it into Dreamweaver to link the design to a web page. However, I would like to embed different links within one HTML file to e-mail out, so I used the image map tool to do so. However, when I copy/paste the completed HTML into an Outlook for Mac message (Command A; Command C; Command V), the image map/additional links do not transfer over once the file is pasted in an e-mail. I also tested this with G-mail and the Apple E-mail app, and was not successful. Please help.

You can't paste images into e-mails. Use absolute links to images hosted on your domain server like this:
<img src="http://yourdomain.com/images/your_map.jpg">
See HTML E-mails: what you need to know
http://alt-web.com/Articles/HTML-Emails.shtml
Nancy O.

Please Help, Flash Player for Mac

I am running Mac OS X 10.7.5. Last night Facebook told me I MUST update to the newest version of Flash Player in order to upload multiple pics. I kept getting plug-in failure messages and then the message saying I need to update my version of Flash.
Problem is I have updated my version of Flash and the plug in still doesn't work. Please help, my business relies on my being able to upload multiple photos daily to social media. What is going on? I have read the forums, the work arounds posted on 4/16. Uninstalled, re-installed, etc. I am still getting flash plug in failures even on Adobe's site. What do I do?

No.
I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine.

Please Help - Flash Image Viewer

Similar Messages

Maybe you are looking for