Please help: Flash problem in IE9 in Vista
I am hoping to get some help with Flash and IE9 on Vista. It had been working fine, but now I only get a grey screen where the video should play. Flash does, however, play in Safari and Chrome.
I have uninstalled flash (using Adode's uninstaller) and re-installed numerous times. It says it installed correctly, but no change.
I uninstalled Flash, uninstalled IE9, re-installed IE9, and re-installed flash without any change
I deleted registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatability\{D27CDB6E......
It looked OK, but I deleted it anyway - but it didn't help
Shockwave flash object shows as an add-on and is enabled. Version: 11.6.602.171
ActiveX filtering is not selected
Security is set to mediium
ActiveX controls and plug-ins is enabled
Software rendering instead of GPU rendering is selected
Any suggestions?
Why are you "printing to pdf"? Does "Save As" yield better results?
Similar Messages
-
.problem is that icon of iblacklist in i tune is "disc phone" like One, named iblacklist, but on screen appear as "secret contact" not as iblacklist icon wich is contact like icon .please help .
iblacklist problem still , I download it again ,this was not helpfullHave you read my reply to one of your duplicate threads : https://discussions.apple.com/message/22774845#22774845 ?
-
Please Help! Problems with Windows Vista 32-bit on Boot Camp (Wireless/Etc)
We recently purchased a new aluminum Mac Book (13 inch) with Leopard (10.5.4). I attempted to install Boot Camp and Windows Vista 32-bit. I can successfully alternate between both operating systems with no problems. However, I am having 2 problems:
1) I cannot connect to wireless internet. No connections will even show up when I attempt to connect, its almost as if an adapter hasn't been installed.
2) I cannot set up the trackpad to do right click.
I've read articles everywhere and nothing has helped. Can anybody please help me??? Any support/advice is greatly appreciated. Thanks in advance!
- PiercedpierceNKC:
Welcome to the Apple discussions.
It appears that you may not have installed the boot camp drivers. Boot into Windows and insert your Leopard installation disk in the CD/DVD drive. This should automatically begin installation of the necessary drivers. Reboot the computer when instructed and all the hardware should work as designed.
The right click is accomplished by placing two fingers on the trackpad and then depressing the trackpad button. This should also work after the drivers are installed as instructed above.
Axel F. -
PLEASE HELP flashing light and playbook doesn't switch on!!
Hello,
I have my tablet won't switch on and when I try to turn on, the red light and green light flashing 5 times. And then nothing. Unable to turn on.
I tried a reboot by pressing power + volume - and nothing!
I tried to update with BlackBerry Desktop Manager (latest version) and when the update reaches the end error message comes to me and it there was a problem: "A connection to the tablet Could not be ESTABLISHED. Please connect your tablet and try again. "
I also tried to charge it with a 2000mA charger for several hours and still nothing.
I no longer guarantee
Please help me, I do not know what to do.
thank you
sorry for my englishSame thing happened to me yesterday. After the error message, I plugged in the charger. It took quite a while but the tablet started charging. It reinstalled the update when it reached the 20% level. Another update error came up to change my setting. I checked my setting but didn't change anything and just reinstall update again which this time was a success. Hope this would help.
-
Please Help, Flash Player for Mac
I am running Mac OS X 10.7.5. Last night Facebook told me I MUST update to the newest version of Flash Player in order to upload multiple pics. I kept getting plug-in failure messages and then the message saying I need to update my version of Flash.
Problem is I have updated my version of Flash and the plug in still doesn't work. Please help, my business relies on my being able to upload multiple photos daily to social media. What is going on? I have read the forums, the work arounds posted on 4/16. Uninstalled, re-installed, etc. I am still getting flash plug in failures even on Adobe's site. What do I do?No.
I am in the same boat. I cannot watch flash videos on the BBC website or on BBC iPlayer, although all other flash videos (YouTube for example) are fine.
For reasons that passeth all understanding, they work with the PPC version of Firefox, called TenFourFoxG5.app, once you have anabled plug-ins, as it does not natively support Flash.
You can download TenFourFoxG5 from here:
http://www.floodgap.com/software/tenfourfox/
Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
But there is a workaround!
Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
Look/search (scroll down) for: tenfourfox.plugins.enabled
Set it to true. (Double click it to toggle it)
Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
I am using Flash 10.1.102.64 in TenFourFox and it works just fine. -
Boot Camp Issue (Please Help, Massive Problem)
Okay here's the deal...
Installed Boot Camp fine
I'm trying to install online updates and mcafee for msn
after like 2 min a blue screen flashes and mac restarts
when windows comes back it say check hard disk
and say this is a fat 32.
then it runs through some files and says there not valid
and windows then corrects them...it puts me back to the welcome screen and i try again and the same thing happens.
Ps. dos my display have anything to do with it cuz everytime it starts up it says it detects a tv display i just close it and move on but i did make sure it wasn't on tv first
please help i need windows for a program for school thats it a working boot camp would make it a whole lot easierDid you make sure to declare you C: drive during the BootCamp setup process?
I had no problems with my BootCamp, XP, and Virus Protection installation. -
Please help (flash intro cs4)!!!
sorry if I posted in the wrong section but I need help.
I have a flash intro and when ever I preview it,the intro background turns to black instead of staying the way it should be.Can somebody please help me out here,I need this flash intro for a website.Please explain this to me in simple terms because im pretty NEW to adobe.
Thanks
Kevin
Note I've tried everything to make the flash background stay the way it was but nothing I do works.the color is black
watch this intro
http://images.templatemonster.com/screenshots/21000/21016.html
i have this intro. I open it in flash and play it. As soon as the Offbeat idea text goes away the background fades to black instead of staying consistent. -
Please help-image problem (display)
Can someone please help with this?
I keep receiving an error (below) while trying to execute the code...
2001-07-19 11:55:02 - Ctx( /dev ): IOException in: R( /dev + /servlet/getImage + null) Connection reset by peer: socket write error
My setup is Tomcat 3.2
JDBC: Oracle's classes12.zip
JDK: Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C)
Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
I have copied my simple code below for review:
package lmmfcd.images;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import javax.servlet.jsp.*;
import javax.servlet.jsp.tagext.*;
import org.apache.jasper.runtime.*;
import java.beans.*;
import org.apache.jasper.JasperException;
public class getImages extends HttpServlet
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
//Grabs and assigns the PageContext
JspFactory _jspxFactory = null;
PageContext pageContext = null;
Object page = this;
_jspxFactory = JspFactory.getDefaultFactory();
pageContext = _jspxFactory.getPageContext(this, request, response,
"", true, 8192, true);
//End of the PageContext Stuff
Connection conn = (Connection)pageContext.findAttribute("conn");
try
ResultSet rset = null;
String queryCmd =
"SELECT image "+
"FROM sgps.images "+
"WHERE pn = '13507028' "+
" AND pic_num = '1' ";
Statement stmt = conn.createStatement();
rset = stmt.executeQuery(queryCmd);
rset.next();
Blob blob = null;
blob = rset.getBlob("image");
response.setContentType("image/jpeg");
byte[] ba = blob.getBytes(1, (int)blob.length());
System.out.println("just above OutputStream");
response.getOutputStream().write(ba, 0, ba.length);
response.getOutputStream().flush();
response.getOutputStream().close();
catch(SQLException e)
throw new ServletException("Problem");
}It compiled okay, but still displayed the broken image as the result....
if (rset != null)
try
BLOB blob = null;
blob = (BLOB)rset.getObject("image");
response.setContentType("image/jpeg");
InputStream in = rset.getBinaryStream("image");
//Have also used:
//InputStream in = blob.getBinaryStream();
OutputStream out = response.getOutputStream();
byte b;
while ((b = (byte)in.read()) != 1)
out.write(b);
in.close();
out.flush();
out.close();
catch(SQLException e)
throw new ServletException("Problem");
} -
Please help--flash 9 wont download
I am slowly realizing that there are a lot of things that
require Flash Player 9. I have tried at least 15 times to install
this, but everytime it pops up the security box, i click install,
and the 'F' comes up with the spiral underneath. It goes away, the
security box reappears, i click install, and the little boz where
the 'F' was is empty, then it goes away, turning to quotation
marks. Why wont it work? i am on my acocunt with administrative
rights....please help! Thank youfirst, if your not using firefox, got to mozilla.com and get
firefox. it the best browser there is and the add-ons that you can
get to enhance it are the bomb. Next time you come across something
that requires flash it will automaticlly download it. -
PLEASE HELP-Flash Version 9.0
Everything was working fine this morning. I went to the
Playhouse disney.com website for my sons. It said I needed to
update my flash player. I downloaded 9.0 for MAC powerPC (I have
version 10.5). The download did not finish, stating I needed a
different plugin. It redirected me back to the same page for
downloading 9.0. I did the uninstall flash player. It said it
worked. I tried to install 9.0 again. Now, it said that I don't
have permission to access the installer. What do I do? If anyone
could please help me, I would really appreciate it!!!
This is the error message I get- 1008:5-5000 Denied Access
ErrorHi oneksrose,
Send me a Private message with your fullname, email and phone
number and I'll open a case for you and get this resolved.
"Send Private Message" is on the left panel under my user
name. I look forward to hearing from you.
Important Note: These online forums are for user-to-user
discussions of Adobe products, and are not an official customer
support channel for Adobe. If you require direct assistance, or
prefer to contact Adobe support staff directly, please contact
Adobe support. -
Please Help, Flash CS.6 Won't startup
I Downloaded and Installed Flash and i Tried to run it but it keeps giving me this message
" the procedure entry point ?_Xruntime_error@std@@YAXPBD@Z could not be located in the dynamic link linrary C;programFiles/Adobe/Adobe Flash CS6/boost_filesystem.dll"
I tried to fix it but i couldn't get anywhere. Please help me. I need it for work in 3 days. please helpPlease see the notice at http://forums.adobe.com/community/robohelp/robohelp_flash
Right question, wrong place.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Please Help - flash Intro how to link to nex page
HI there
The end of the flash intro, i have one link on the bottom (
skip intro)
I want th end of flash intro, it will automatic link to next
page ( mai.htm) without click any link or.....
Please help
Thank you
GraceHi
Add this code to the last frame of your intro:
getURL ("yourlink.html"); -
I have just bought an Airport Extreme Base Station. I have a Mac Book, iBook G3 and a Win XP Laptop that I have so far connected to the network.
On the base station itself I have a Western Digital My Book External Hard Drive and an HP Photosmart C4180 all in one printer connected via a USB hub.
All the computers can see the external hard drive but I can only get the Win XP Laptop to print. The two Apple laptops will not print.
One last thing all my computers connected to the internet wirelessly via my BT Fusion Home Hub before buying the base station. When I first installed the base station I connected the WAN port to the BT hub. As far as the base station is telling me everything must be setup right as I have the solid green light.
What am I doing wrong. Please help I love Apple products and really do not want to send this back.I'd like to suggest you go to www.tune-up.com and download and install this program.
You get a 30 day free trial to start. If you sign up as a reseller you can get the program for $29 after that.
I'm not an employee of the company but I just recommend the program as it has fixed many a friends
problems and has kept my computers and my familys computers running straight and clean with no problems.
Even if you don't buy the program after using it and it fixes your problems you can uninstall it and consider it a blessing.
I'm sure once you see what it can do you will think twice to buy it.
Other than that, I don't know much about your system to even begin to try to tell you what to do as a troubleshooter.
It could be any number of things that are wrong with it. Number one, the registry might be really messed up.
Tune-up will fix that fix off for you. A computer is like a car, it has to be kept in tune in order to keep running right.
Another problem area is malware and viruses. We all know about them but do we ever really know if we might have been bit
by any of them. Most times not until something serious causes us problems. Can I suggest another program you might try?
AVG Internet Security 2011 at www.avg.com. It's another 30 day free trial program. I am also a reseller and have all my computers
and family members registered and using it.
I can tell you that with only these two programs installed on your computer you can rest easy and use your computer without any fears or problems. Let me know how it goes for you. Good luck.
Paul Streicher
Tampa, FL -
Please help. proxy problem
Hi there,
I am facing a problem in accessing net content. I am using proxy to get net access.
here is my code:
Properties props=System.getProperties();
props.put("proxySet", "true");
props.setProperty( "proxyHost", "192.168.6.22" );
props.setProperty( "proxyPort", "80" );
props.setProperty( "proxyUser", "mv5217" );
props.setProperty( "proxyPassword", "surya" );
System.setProperties(props);
String content="";
URL url = new URL("http://www.rediff.com");//ew URL("http://www.yahoo.com");
BufferedReader in = new BufferedReader(new InputStreamReader(url.openStream()));
String inputLine;
while ((inputLine = in.readLine()) != null)
content+=inputLine;
in.close();
System.out.println("Content "+content);
}catch(Exception e){
e.printStackTrace();
the above code some time returns me blank string and some times below exception
java.io.IOException: Server returned HTTP response code: 407 for URL: http://www.rediff.com
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:558)
at java.net.URL.openStream(URL.java:851)
at TestingClass.<init>(TestingClass.java:26)
at TestingClass.main(TestingClass.java:40)
I am getting the exception even sending a mail to yahoo pop server. below is the my java mail code.
public static String MAIL_HOST = "smtp.mail.yahoo.com";
public static String MAIL_HOST2 = "pop.mail.yahoo.com";
* Constructor
public JavaMailToYahooServer() {
String from = "[email protected]";
String subject = "Testing of sending mail";
String body = "this is the mail content";
String to = "[email protected]";
MAIL_FROM = from;
MAIL_SUBJECT=subject;
MAIL_BODY=body;
MAIL_TO=to;
Properties props = System.getProperties();
props.put("proxySet", "true");
props.put("proxyHost", "192.168.6.22");
props.put("proxyPort", "80");
props.put("proxyUser", "proxy user id");
props.put("proxyPassword", "proxy password");
//Properties props = new Properties();
props.put("mail.smtp.host", MAIL_HOST);
System.setProperties(props);
Session sess = Session.getDefaultInstance(props, null);
try {
// Connect to host
//Store store = sess.getStore("pop3");
//store.connect(MAIL_HOST2, -1, "vmeghraj", "surya");
// Create a message
Message msg = new MimeMessage(sess);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address = {new InternetAddress(to)};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subject);
msg.setSentDate(new Date());
msg.setContent(body, "text/html; charset=ISO-8859-1");//HTML type
//msg.setContent(body); //Text type
// Send the message
Transport trans = sess.getTransport("smtp");
trans.connect(MAIL_HOST,"my yahoo id","my yahoo password");
trans.send(msg);
// Let the user know that the mail was sent
trans.close();
}catch (Exception ex) {
System.out.println("Errorr : "+ex);
for this I am gettin below shown Exception
Errorr : javax.mail.MessagingException: Unknown SMTP host: smtp.mail.yahoo.com;
nested exception is:
java.net.UnknownHostException: smtp.mail.yahoo.com
What wrong I am doing in the above coding..
Please help me .... it is an urgent requirement
thanks in advance,
Veerendarrefresh
-
Please Help, Mobo problems
Hello all, i have the new K8N neo platinum nforce3 motherboard and it has been working fine up until today when i attempted to install a stick of 256mb of PC2700 memory. After i installed the memory properly, i attempted to boot up my computer and i got the Diagnostic Sound of RAM problem. Nothing is showing up on my screen so i cant enter BIOS or CMOS. Please help i need my computer back asap
I cannot even get into BIOS. I boot up and get a blank screen and the diagnostic sound So tried to reset the jumper and that didnt work...my only other solution is that i get a few sticks of PC3200 memory. Another suggestion i hvae recieved was that i fractured my motherboard. Possibly a little hairline fracture in my motherboard that would render it useless. But why would my motherboard turn on if it was fractured? doesnt make sense. Computer powers on, but no visual on the screen and Diagnostic sound indicating a RAM problem.
Maybe you are looking for
-
Lately my usually reliable Firefox has been taking longer and longer to boot up, how can it be made to boot up faster? == This happened == Every time Firefox opened == A few months ago
-
Running into strange errors when creating a new instance
Hello: I am running 9.2.0.8 on a Windows 2003 Server. When I try to create a new instance, I chose a New Database/UTF-8/16KB Block Size. Everything else was default value. However, I get a "ORA-29807: specified operator does not exist" error. When I
-
My wokflow stuck at step level
Dear experts, My workflow having couple of steps(standard tasks fore ground and background). After completion of one back ground step workflow got stuck(that step is complted successfully,) but not moved to next step that is another back ground step.
-
How to Join data's of two tables
hi (SELECT ((T1.LineTotal (.6/100)) - ((T0.DocTotal-T0.PaidToDate)0.1)) FROM [dbo].[OINV] T0 INNER JOIN [dbo].[INV1] T1 ON T0.DocEntry = T1.DocEntry WHERE T2.[SlpName] ='1- Pradeep N' ) as '1- Pradeep N IP' there is some problem in this query in Jo
-
Hi! I have following situation: I should check our source code for all places where exists INSERTs, UPDATEs,... etc. on one view and implement certain modifications. View name is AG. So to do that my query is: SELECT owner "Owner", NAME "PL/SQL Obj