PLEASE HELP! Flashing desktop/finder - can't do anything!
Hi,
My mac just went crazy and I have no idea what to do, Please help me!
I've just installed a program called Slideshow Magic (shareware downloaded from download.com) and after making 2 slideshows the finder just started flashing. Basically all the desktop icons and the top bar appear then dissapear about every 2 seconds, the little black arrow next to the Finder icon in the dock appears and dissapears at the same intervals, so I assume the Finder is opening then quiting, opening and quitting over and over.
All other programs can be opened from the dock.
I've tried restarting and shutting down but the same problem occurs everytime I start up.
Can anyone suggest what has gone wrong or more importantly how to fix it, it has all my art college work on and I've got a deadline next monday so I really need to get back on my feet. Any help will be MOST appreciated!
Thanks for your time
George
Power Mac G4 Desktop
Hello,
Thank you both for your suggestions, however neither have worked.
Dale, I went through Dr Smokes guide and all was fine apart from the Cache Cleaning software. I couldn't install the software as the finder isn't open long enough to allow me to do so.
Niel, I tried booting with Command and S held down and ran the commands you suggested but to no avail.
A couple of things I tried doing myself...
I ran the Hardware Test by booting from the cd and holding the option key. I ran the extended test and everything passed, so I know its not a hardware issue.
I then booted from the cd again and updated the system software, upon restarting the desktop appeared fine, but after about a minute it reverted to it's flashing state. The two files that I created from the slideshow program (that originally caused this problem) are still on the desktop and I assume that they have caused it to go again.
Can you suggest a way that I can delete these files and consequently stop the machine crashing every time I update the software?
Cheers
George
Similar Messages
-
Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason -
need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?
Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing. -
Can anybody please help me to find out the link where small co.
can anybody please help me to find out the link where small companies implementing saps.
Hi,
SAP is providing a solution to Small Scale Industries with SMB (Small and Midsize Business) Product for various industries. It's a Pre configured SAP Solution pertaining to a specific industry(like Pharma, Oil..etc) with which the implementation as well as the cost will also decreases.
Regards,
Jayaram... -
I am not sure that I deleted Iphoto, but Iphoto desapeared. I don't have original disc. Can you, please help me , to find it somewhere on my mac?
The iPhoto application should be in your applications folder
If you have removed it and your computer came with restore disks then you will need them to reinstall. Or you can purchase a version on DVD or from the App Store. Apple my be able to reace missing restore disks for a nominal charge
LN -
Can anyone tell me how to get rid of tlb search? It unfortunately entered into my mac. Whenever I use safari, a pop-up window opens with some ads. Please help me to find a way to remove this malware.
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Please help me in finding link to downlaod oracle BI discover
Please help me in finding link to downlaod oracle BI discover
i didnot find discover in obiee so where can find
Thanks in AdvanceHi,
Discoverer is part of BI Standard Edition. You can down load BI from here. You need the 2 CDs for Discoverer Plus and Viewer and the Tools CD for Discoverer Admin and Desktop.
You should also apply the patches to go to the latest version. The LearnDiscoverer blog has details of the latest patches.
Rod West -
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"
HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradharHi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420 -
I would like to help me. My iPhone was lost and stolen and I didn't have configured Find My iPhone. So I could n't find it. Please help me to find it or delete my information and photos. This is my serial No: DN*****TWD.
<Personal Information Edited by Host>If you didn't set up Find My iPhone, there's nothing we can do to help you. Sorry.
-
why is my ipad doesnt have a software update?please help,i cannot find it..
The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.
-
Please help me to find out windows 7 home premium product key
Please help me to find out windows 7 home premium product key .My windows product ID is 00359-OEM-XXXXXX-XXXX
my pc have sticker but is damage ...only can see last is -RXWJ8-XXXXXHi,
Please don't disclose any product key information in here. This is public and open place to discuss Windows 7 problem. It's dangerous for any personal information.
Also, since the Windows is brought with OEM computer, maybe you could try to contact the manufacturer for help.
Karen Hu
TechNet Community Support -
Please help me to find the table for fields where the descriptions are give
please help me to find the table for fields where the descriptions are given below
Customer Support Administrator
first line Support indicatorYou could also try table DD01T. In se 16,put in the description thats needed,you will get to know the respective data elements.
Then you can use DD03L to find the respective table. This would work if the data element is not generic.
Regards,
Anubhav. -
please help me to find.. compaq presario f762au sound driver for window 7 32 bit..
This question was solved.
View Solution.Hi,
It does not make any sense. Based on its support page, it uses "Conexant HD-Audio SmartAudio 221 Driver" for Vista
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3689...
and now it can't see for Windows 7:
https://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-75899-1
Please try the following methods:
http://windows.microsoft.com/en-US/windows/help/no-sound-in-Windows
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Please help me to find simple mathod to get working hours
Please help me to find simple mathod to get working hours .The following is my script
ardate is date argument in afunction
id would be integer argument
Choose case dayname(ardate)
case 'monday'
select mon_hrs
into:l_db_hrs from workhrs
where empid= :id;
case 'tuesday'
select tue_hrs
into:l_db_hrs from workhrs
where empid= = :id;
case 'wednesday'
select wed_hrs
into:l_db_hrs from workhrs
where empid= = :id;
End Choose
With Many Thanks
polachanHi polachan,
Since this is SQL Server forum, as other post, you need to describe your table structure, the data and expected results. Then it is appropriate and more experts will assist you in there.
According to your code message, it does not regards SQL Server T-SQL statement. We need to verify if there are two tables (workhrs and I_db_hrs), after checking the values of “ Monday”,”Tuesday”,”Wednesday” from the workhrs table, then copy the related working
hours into the new table (I_db_hrs), right?
If yes, you can refer to the following T-SQL statement.
create table workhrs
(id int, workname varchar(20), ardate varchar(10), hrs int)
insert into workhrs
values
(1, 'A','monday',1),
(1, 'A','tuesday',3),
(1, 'A','wednesday',5),
(2, 'B','monday',1),
(2, 'B','tuesday',1),
(3, 'C','monday',1),
(3, 'C','wednesday',2)
select * from workhrs
select id, ardate, hrs into I_db_hrs from workhrs
select * from I_db_hrs order by ardate
---the result:
id ardate hrs
1 monday 1
2 monday 1
3 monday 1
2 tuesday 1
1 tuesday 3
1 wednesday 5
3 wednesday 2
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
HT1937 please help me to find my lost iphone 5 .its switched off
please help me to find my lost iphone 5 .its switched off
i can provide you by serial numberif find my iphone was enabled on the device then you should be ok, log into icloud and select the find my iphone, on the devices tab click the device in question, if a location comes on the phone is swiched on, if not and the phone is turned off select the email whan found option and also i would send a request to wipe the phone and send a alert to the device so if any one turnes it on they will see the message that it is stolen
Maybe you are looking for
-
2 days ago I downloaded ios7 onto my iphone 4. Every time I update an app, that app stays in the window that is supposed to say "all apps are up to date." I've tried all the fixes, including turning the phone off and on; signing in and out of the app
-
Word docs opening only in AppleWorks
Tiger came with Microsoft Test Drive software installed. So, when I went to open an old Word doc, instead of launching my version of Word 2000, it launched Word 2005 (the test drive). I went to the Get Info panel and toggled it to select my version W
-
Send button not working in imessages
I'm trying to send a test message to myself in imessages. I type the message but the 'send' button never gets enabled
-
HDV Channel 3 mic...?
I am editing using FCP Studio 2. Recently a bunch of footage has been recorded for me as the editor on the Cannon XLH1 Camera. The footage is HDV and recorded on mini dv tapes. A mic was used that was connected to the 3rd channel for audio. I have be
-
If I bought ipad air wifi with cellular version, can I insert my sim card of iphone5?