Please help for ios6 maps, india
It is nt working properly, as it not showing navigation between two places. Only shows current location. Please need ur immediate help.
I should have never done the Grave mistake of downloading Disastrous iOS6. The maps are not working at all. Also, they have moved YouTube Icon from new version.I am using Iphone 4S.
If this was not enough, take a look at below link:-
http://www.apple.com/ios/feature-availability/#maps-directions
Do anyone of you know replacement for Apple Maps?
Thanks
Ankit
Similar Messages
-
Please help for my iphone 4 unlock
please help for my iphone 4 unlock
Apple store said my iPhone 4 had an LCD issue and that is why slide to unlock is frozen. My warranty ran out so it would cost approx. $150 to repair it he said. Time for a new phone but not sure I want another iPhone now.
-
Please Help for the Query
Hi frds please help me for the below query.What I want to do is to pull out the data from below table :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/18/2008 3IINFOTECH -4
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
as such :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
Here I want to find the Trend i.e either asc or desc order from the lowest indicator.
In the above sample data -8, -4, -5, -3 out of which I want the asc order data -8, -5, -3 and exclude -4 data.Because the asc order -8, -5, -3 will not follow.
So I want the data
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3SQL> CREATE TABLE BORRAME(FECHA DATE, INDICA VARCHAR2(100));
Tabla creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/13/2008','MM/DD/YYYY'), '3IINFOTECH -8');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/18/2008','MM/DD/YYYY'), '3IINFOTECH -4');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/25/2008','MM/DD/YYYY'), '3IINFOTECH -5');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/27/2008','MM/DD/YYYY'), '3IINFOTECH -3');
1 fila creada.
SQL> COMMIT;
Validación terminada.
SQL>
SQL> SELECT FECHA, INDICA
2 FROM BORRAME
3 WHERE SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) <> '4'
4 ORDER BY SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) DESC;
FECHA
INDICA
13/03/08
3IINFOTECH -8
25/03/08
3IINFOTECH -5
27/03/08
3IINFOTECH -3
-
Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online>???
any one else having troble??
please help
I need my mailHello, DragonStudios.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Jason H. -
Please help - Dreamweaver Image Map Tool/Outlook for Mac
Hello:
I was wondering if you could help me navigate through an issue I am having with the image map tool. I have created a design file is PSD, saved it as a JPG, then transferred it into Dreamweaver to link the design to a web page. However, I would like to embed different links within one HTML file to e-mail out, so I used the image map tool to do so. However, when I copy/paste the completed HTML into an Outlook for Mac message (Command A; Command C; Command V), the image map/additional links do not transfer over once the file is pasted in an e-mail. I also tested this with G-mail and the Apple E-mail app, and was not successful. Please help.You can't paste images into e-mails. Use absolute links to images hosted on your domain server like this:
<img src="http://yourdomain.com/images/your_map.jpg">
See HTML E-mails: what you need to know
http://alt-web.com/Articles/HTML-Emails.shtml
Nancy O. -
Please help for User defined extension functions
the tutorial given for extension functions doesn't work as well as our new functions
even though i follow all the given steps and see the functions in my user defined extension functions tab in xslt map.
all the target nodes that use the extension function disappear in the resulted target xml.
please help.have you compiled your java file and uploaded the jar file(containg the .class file and the Manifest.MF file) in the <OC4J_HOME>\j2ee\home\applib directory and then restarted the server??
-
Hello,
Suppose i have a input xml:
<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>
Now I want output as:
<Header>XYZ</Header>
<Body><![CDATA[<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>]]>
</Body>
Please help how will I do that......whole payload is going in Body also some value in above payload is mapping.
Can anyone give me UDF to send whole payload in one node
Thanks and Regards
Hemantthis can be achieved easily by aXSLT mapping....also can be achieved by using grahical mapping
For XSLT coding:
creation of CDATA with message mapping
For graphical + XSLT: /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Abhishek. -
Please help for using perform in SAP script
As subject.
My sap script code as below:
/: PERFORM GET_CHAMT_DATE IN PROGRAM ZRAP004
/:USING &SPELL-WORD&
/:CHANGING &SPELL-WORD&
/:ENDPERFORM
My program ZRAP004 code as below:
FORM get_chamt_date USING u_iword TYPE spell-word
CHANGING u_oword TYPE spell-word.
CONCATENATE u_iword '元整'(t01) INTO u_oword.
endform.
This form is for check printing.
It's by standard function 'F110' to excute check printing.
But when i finished this transaction. System return error message as below:
<b>This routine contains 2 formal parameters, but the current call
contains 4 actual parameters.</b>
Please help. Thanks a lot!!Hiii
PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM. -
Kind Attn:OTN Customer Team PLEASE HELP FOR LOGIN
I have seen lot of members are facing login problem with old username/password.
I am facing the same.I am unable to login with old username/password "dmewani/*******" .Please reset my account.
even after coping "username/password" from email received from "orcle", problem is same.
Please Help.Hello,
Thanks for your help. Yes this could help but as I already has the licencees, I just need someone at Adobe's who could generate the keys ,... but after hours between Adobe and my reseller ; each one says to contact the other I'm getting crazy ...
Aynwas, thanks very much for your help -
Please help for my unexpected shutdown W510!!!
Since I used my W510 ( 43192NU with Windows 7 32bit ) from April 2010, I did experienced with unexpected shutdown. First, I thought it was my improperly use. But now, it shutdown unexpectedly even 3 times a week. Did anyone got the same experienced? Please help me...
I have the same exact problem!!!
And it drives me crazy.
It happens only when my battery is charging (that is, it's not at 100%).
If the battery is fully charged, and I'm on AC power as well, all works o.k., but as soon as the battery is low (say 50%) and I plug it in, and put some load on the system (using VMware a lot) it runs for a while then dies instantaneously. No gradual shut-down - just shuts off.
It just happened again a few minutes ago, and I lost an important VMware file.
I called Lenovo support a few months ago, and they wanted me to send the laptop in for a week to make sure there is really a problem.
Any other input/comments would be appreciated.
BTW, I purchased the W510 in February 2010. -
Please help for ORA-02049 - Timeout error
Hi All,
we have got a reporting DB and 14+ Application DBs, the data is extracted from all the application databases (DBs) and dumped into the common tables of reporting database. While inserting and updating the common reporting tables the other jobs gets timeout error and fails. We daily face this failure problem (error: ORA-02049 - Timeout error distributed transaction waiting for lock) for almost 10-15 times.
Can you please help me out in resolving and getting the permanent solution for this problem.
Thanks in advance.Thanks Kamal,
as mentioned above, I have got Oracle,Java,Unix environment. Autosys jobs are scheduled through out the day.
Mechanism : Autosys job triggers the action at specified time, Unix code calls oracle packaged procedure, extracts data and puts into the common reporting table from this data java code formats the report output.
There are separate reporting jobs for all instances though the report is same but for different locations(14 DB instances).
and all these reporting jobs dump data into common reporting table, data can be differentiated on the hub or location.
But if one job is running for first instance then second job waits for the lock and fails after 2 mins.
I have to avoid this situation, I hold I am able to explain the situation. -
Please help for Registration point to a movieclip/sprite
I am new to AS3 and have a doubt on Registration point for
Movie clip / Sprite. Please help me the sample code for this
I simply draw a line using AS3 in flash environment. but i
used graphics.moveTo for center. but if i run this it is simply
taking x,y axis 0,0 and move around the stage. I want to move this
from center of the stage. please help.
below is my code
var line:Sprite = new Sprite()
addChild(line);
var cx:Number = stage.stageWidth/2;
var cy:Number = stage.stageHeight/2;
var radius:Number = 1;
var increase:Number = 0;
line.graphics.lineStyle(1, 0xff00ff);
line.addEventListener(Event.ENTER_FRAME, onEnter);
function onEnter(event:Event):void
increase += radius;
//trace(increase);
//line.graphics.moveTo(cx, cy);
line.graphics.lineTo(cx + increase, cy + increase);
line.rotation += 0.1;to appear to control the registration point of line, make it
a child or an empty display object and offset it by -x,-y where x,y
is your choice for the apparent registration point. you can then
control the parent object and it will behave like your line with
changed registration point. -
Please Help for RME fireface400 with Logic Studio 8
Please I do ask help for configuration of audio interface RME fireface400 with iMac OS 15.5.5, I have problem in output 7/8 monitor phones(no sound or crack sound) and look Fireface Mixer in to the desktop monitor. Where is the problem? I have drive 2.62a.
Thanks for answer, also in Italiano
GrazHave you tried the RME userforum?
http://rme-audio.de/forum/index.php
Maybe you problem is running OS 15.5.5 - must be a beta version -
Please help for some reason i cannot slide to unlock my ipod
please help i cannot get my ipos to slide to unlock
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Please Help; MAPVIEWER-05501 Map tile layer not found error
Hi, I am just a newbie to oracle mapviewer; I installed mv 11.x. on Xe 11g with mvdemo dataset as mentioned in demo setup instructions.
It seems everything went fine including mvdemo data import and oc4j instance.
Only thing if i am missing is when I goto create "Create a map tile layer" in "Manage MapViewer" of "Admin" page; I can find datasource but do not find anything in "base map" combo. Thus i can't create Any Map tile.
Now, when I click on a demo example I get following error:
*[MVglobalvariables.getmap.cacheconfig]mapviewer-05501:maptile layer not found.check map tile layer name and/or data source name(mvdemo.demo_map)*
When i check the user_sdo_cached_maps view return "no rows selected ".
I have tried many restarts, re-import of mvdemo data but nothing worked.
please help me.
RegardsThanks Anyway I have found the solution, indeed I was missing the metadata script using @mvdemo.SQL.
I Followed the instructions on the sites given below:
http://gerardnico.com/wiki/spatial/mapviewer/mapviewer_demo_installation
http://www.dbuggr.com/smallwei/step-step-instruction-install-oracle-mapviewer-10g-10-1-3-1/
Maybe you are looking for
-
how do i delete muliple emails as i cant seem to delete more than one at a time cant seem to highlight them anymore
-
After Effect / Premiere Pro CC 2014 Video Importing Conflicts
Why are my Adobe software packages not cooperating? PRes imported out of AE and into PPRO, but no die? Why? Today I have a brand new MacBook Pro, I also have Adobe CC installed, predominantly for PremierePro and After Effects. First issue - With ProR
-
User query - Average payment days
Hi, I made a query to calculate the average number of days of payment for a customer using the journal transactions: +SELECT AVG((DateDiff(DD, JDT1.DueDate, JDT1.MthDate))) FROM OJDT INNER JOIN JDT1 ON OJDT.TransId = JDT1.TransId LEFT JOIN ORCT ON OJ
-
[EJB:010142] error for cascade-delete
Hi, I'm getting [EJB:010142] error (Instance of EJB <relatedEJB> with primary key <pk> does not exist) while trying to implement a straight-forward cascade-delete option in ejb-jar.xml for a one-to-many relationship using EJB 2.1. While the cascade-d
-
Is anyone there or is this just a way to make us think you are there?