Please help for MSI GX660 bad flash

Hello everyone!
I've writed to Online Custumer support on MSI Company, asking for new BIOS version fo my laptop. They send it to me, and i flashed BIOS successsfuly to new version, but i didn't like it becouse a lot of config menus were removed. I asked Tech Support for the original one, i've flashed it the same way, but laptop wont boot on now. Everything start exept of display.
I'm waiting them for answer from 1 week- nothing !! There is not MSI representive company in Bulgaria and i'm stuck :(
Also i want to say a lot things to MSI Customer support !!! For me - THEY bricked my laptop. And i can't understand how htey just stop write to me and leave me with this brick :(
Can anyone help with something ? Blind flash, recovery, other ?? Thanks a lot !

Quote
I didn't asket exactly for 1.0F but in 1st question i told that is my original version.
you should told them which bios version you are looking for,
as stock bios versions varry per models.
Quote
So, you reccomend to swap CPU, Ram , Video card with others to try if it could works?
Yes eventually
Quote
Can anyone give me 1.0F Bios for my GX660 and what is hiw auto recovery name so i can try blind flash/recovery ?
attached it below
but for recovery name is unknown.
you can try names: AMIBOOT.ROM , E16F1IMS.ROM
placed over FAT/FAT32 USB key, and use this procudure: https://forum-en.msi.com/index.php?topic=134435.msg1009999#msg1009999
just use your bios file names.
other option is to desoldier to bios chip, then to repprogram it and resoldier back
[assume your NB has no warranty]

Similar Messages

Please help -- How can I install flash player plugin (version 8) in browser without downloading setup or redirecting to macromedia site if flash plugin is not available in browser

Hi,
Please help
How can I install flash player plugin (version 8) in browser
without
downloading setup or redirecting to macromedia site if flash
plugin is not
available in browser
Thanks

Via Javascripting. Look for Flash detection kits at the
Adobe/Maromedia web
site and also at Internet search engines.
As well this forum focuses on database access issues and you
might find more
takers for this type of question in the Flash General forum.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"jiby" <[email protected]> wrote in message
news:e3odp2$pdc$[email protected]..
Hi,
Please help
How can I install flash player plugin (version 8) in browser
without
downloading setup or redirecting to macromedia site if flash
plugin is not
available in browser
Thanks

F4 Help for Territory Attribute - BAdi CRM_TERRMAN_ATTRIB (CRM 7.0)

Hi,
I have a Z field in my Territory. I am trying to implement F4 help for that using BadI CRM_TERRMAN_ATTRIB. Method : GET_F4_HELP_CUSATTR .
But, I am not able to understand how can I impement this method to get F4 help. as It is returning One Interface which has no attributes , no methods.
Please help me to implement this method such that I can get F4 help for my Custom attribute.
Thanks,
Sandeep

Hi,
I hope this might help you start with.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/840ad679-0601-0010-cd8e-9989fd650822#q-5
Follow this link, and search for "Using a variable from a calling program without passing it in parameter ".
Regards,
Susanta

Please help for my iphone 4 unlock

please help for my iphone 4 unlock

Apple store said my iPhone 4 had an LCD issue and that is why slide to unlock is frozen. My warranty ran out so it would cost approx. $150 to repair it he said. Time for a new phone but not sure I want another iPhone now.

Please Help for the Query

Please Help for the Query
Hi frds please help me for the below query.What I want to do is to pull out the data from below table :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/18/2008 3IINFOTECH -4
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
as such :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
Here I want to find the Trend i.e either asc or desc order from the lowest indicator.
In the above sample data -8, -4, -5, -3 out of which I want the asc order data -8, -5, -3 and exclude -4 data.Because the asc order -8, -5, -3 will not follow.
So I want the data
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3

SQL> CREATE TABLE BORRAME(FECHA DATE, INDICA VARCHAR2(100));
Tabla creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/13/2008','MM/DD/YYYY'), '3IINFOTECH -8');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/18/2008','MM/DD/YYYY'), '3IINFOTECH -4');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/25/2008','MM/DD/YYYY'), '3IINFOTECH -5');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/27/2008','MM/DD/YYYY'), '3IINFOTECH -3');
1 fila creada.
SQL> COMMIT;
Validación terminada.
SQL>
SQL> SELECT FECHA, INDICA
2 FROM BORRAME
3 WHERE SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) <> '4'
4 ORDER BY SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) DESC;
FECHA
INDICA
13/03/08
3IINFOTECH -8
25/03/08
3IINFOTECH -5
27/03/08
3IINFOTECH -3

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online ??? any one else having troble?? please help I need my mail

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online>???
any one else having troble??
please help
I need my mail

Hello, DragonStudios.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Jason H.

Please Help Bios MSI RX9550 TD128

I need the original bios of MSI RX9550 TD128. I found in one page a vga bios for video cards with chipset Ati, but with that bios (RX9550 TD128) windows detect now like a MSI RX9550SE and works like a SE, very very slow =(
Anybody can help me? PLEASEEEEE!!!!!

Bad flash with out backup

Please help me download and install Flash Player!

One day, I had no problems viewing Flash on my computer. Then
one day last week, it told me I needed to download Flash Player 8
to view The Vine on E!Online. I haven't been able to download Flash
Player 8 or 9. Or anything from this site, for that matter.
I went here (
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash&promoi d=BIOW),
clicked download. Clicked the yellow strip that appeared to install
the Active X control or whatever it's called. A pop-up asked if I
wanted to install or do not install. I clicked install, then
nothing happens. No download box shows up or anything.
I've un-installed my flash player (if i even had one) and
have tried so many times to download a new flash player.
PLEASE HELP!

ive uploaded the exe file to my server, so
go
here and save it to your comp, unzip the file, and run the
program.

Please help for Registration point to a movieclip/sprite

I am new to AS3 and have a doubt on Registration point for
Movie clip / Sprite. Please help me the sample code for this
I simply draw a line using AS3 in flash environment. but i
used graphics.moveTo for center. but if i run this it is simply
taking x,y axis 0,0 and move around the stage. I want to move this
from center of the stage. please help.
below is my code
var line:Sprite = new Sprite()
addChild(line);
var cx:Number = stage.stageWidth/2;
var cy:Number = stage.stageHeight/2;
var radius:Number = 1;
var increase:Number = 0;
line.graphics.lineStyle(1, 0xff00ff);
line.addEventListener(Event.ENTER_FRAME, onEnter);
function onEnter(event:Event):void
increase += radius;
//trace(increase);
//line.graphics.moveTo(cx, cy);
line.graphics.lineTo(cx + increase, cy + increase);
line.rotation += 0.1;

to appear to control the registration point of line, make it
a child or an empty display object and offset it by -x,-y where x,y
is your choice for the apparent registration point. you can then
control the parent object and it will behave like your line with
changed registration point.

Please help me Remove this bad file program DefaultTab

please help me to delete this bad file/program DefaultTab.
i tried to delete it on program files but it keep saying i dont have permision,
I try to search it on regedit but i can find it there,
im using HP Pavilion p6140d Desktop PC, windos vista 32bit,
please help me to fix this problem

Hi,
As this is a permissions issue, try the following.
This is a useful utility that will add 'Take Ownership' to the right click context menu. The download is on the following link.
Take Ownership
This is a zipped file. If you don't have an extraction utility installed, download and install 7-Zip which can be used to open this so that you can run the installer.
Once you've installed 7-Zip, just right click the zipped 'Take Ownership' folder, select 7-Zip and select Extract Files and click Ok. When done, open the newly extracted folder and you will find the utility to add 'Take Ownership' to the right click menu. Just double click it to install and then close the Window.
Now go into your Program files, right click on DefaultTab and select Take Ownership. Now right click it again and see if you can now delete it.
Let me know.
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please help, need to import .swf/flash media

Hi all, have a little issue here. I have some SWF flash media and I want to bring it into imovie so I can edit it more effectivley then with qt. However, I have been haveing alot of trouble, most time I only get the audio part of it and no image. Most of the media is widescreen, I was able to export the media in qt to dv stream and then import it, however, it lost its widescreen look and was kinda squished from the sides if that makes sense, if anybody has expeirence with this type of media, please help.
Nathan

Hi Nathan,
I've never "dared" to convert .swf, but I read a lot about problems doing so... probably the Quicktime section of this forum is better to ask...
maybe a much easier workaround is using tools as SnapzPro from Ambrosia; this tool claims to "record" any screen content (and audio) and convert it directly into any wanted format (as dv)...
just a thought.......

Please help for User defined extension functions

the tutorial given for extension functions doesn't work as well as our new functions
even though i follow all the given steps and see the functions in my user defined extension functions tab in xslt map.
all the target nodes that use the extension function disappear in the resulted target xml.
please help.

have you compiled your java file and uploaded the jar file(containg the .class file and the Manifest.MF file) in the <OC4J_HOME>\j2ee\home\applib directory and then restarted the server??

Please help for using perform in SAP script

As subject.
My sap script code as below:
/: PERFORM GET_CHAMT_DATE IN PROGRAM ZRAP004
/:USING    &SPELL-WORD&
/:CHANGING &SPELL-WORD&
/:ENDPERFORM
My program ZRAP004 code as below:
FORM get_chamt_date USING u_iword TYPE spell-word
                   CHANGING u_oword TYPE spell-word.
CONCATENATE u_iword '元整'(t01) INTO u_oword.
endform.
This form is for check printing.
It's by standard function 'F110' to excute check printing.
But when i finished this transaction. System return error message as below:
<b>This routine contains 2 formal parameters, but the current call
contains 4 actual parameters.</b>
Please help. Thanks a lot!!

Hiii
PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
       INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
       INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
      w_vbeln LIKE vbak-vbeln,
      w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
           input = w_ebeln
      IMPORTING
           output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.

Please Help for this scenario

Hello,
Suppose i have a input xml:
<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>
Now I want output as:
<Header>XYZ</Header>
<Body><![CDATA[<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>]]>
</Body>
Please help how will I do that......whole payload is going in Body also some value in above payload is mapping.
Can anyone give me UDF to send whole payload in one node
Thanks and Regards
Hemant

this can be achieved easily by aXSLT mapping....also can be achieved by using grahical mapping
For XSLT coding:
creation of CDATA with message mapping
For graphical + XSLT: /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Abhishek.

Kind Attn:OTN Customer Team PLEASE HELP FOR LOGIN

I have seen lot of members are facing login problem with old username/password.
I am facing the same.I am unable to login with old username/password "dmewani/*******" .Please reset my account.
even after coping "username/password" from email received from "orcle", problem is same.
Please Help.

Hello,
Thanks for your help. Yes this could help but as I already has the licencees, I just need someone at Adobe's who could generate the keys ,... but after hours between Adobe and my reseller ; each one says to contact the other I'm getting crazy ...
Aynwas, thanks very much for your help

Please help for MSI GX660 bad flash

Similar Messages

Maybe you are looking for