Please help for my unexpected shutdown W510!!!
Since I used my W510 ( 43192NU with Windows 7 32bit ) from April 2010, I did experienced with unexpected shutdown. First, I thought it was my improperly use. But now, it shutdown unexpectedly even 3 times a week. Did anyone got the same experienced? Please help me...
I have the same exact problem!!!
And it drives me crazy.
It happens only when my battery is charging (that is, it's not at 100%).
If the battery is fully charged, and I'm on AC power as well, all works o.k., but as soon as the battery is low (say 50%) and I plug it in, and put some load on the system (using VMware a lot) it runs for a while then dies instantaneously. No gradual shut-down - just shuts off.
It just happened again a few minutes ago, and I lost an important VMware file.
I called Lenovo support a few months ago, and they wanted me to send the laptop in for a week to make sure there is really a problem.
Any other input/comments would be appreciated.
BTW, I purchased the W510 in February 2010.
Similar Messages
-
Please help for my iphone 4 unlock
please help for my iphone 4 unlock
Apple store said my iPhone 4 had an LCD issue and that is why slide to unlock is frozen. My warranty ran out so it would cost approx. $150 to repair it he said. Time for a new phone but not sure I want another iPhone now.
-
Please Help for the Query
Hi frds please help me for the below query.What I want to do is to pull out the data from below table :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/18/2008 3IINFOTECH -4
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
as such :-
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3
Here I want to find the Trend i.e either asc or desc order from the lowest indicator.
In the above sample data -8, -4, -5, -3 out of which I want the asc order data -8, -5, -3 and exclude -4 data.Because the asc order -8, -5, -3 will not follow.
So I want the data
date ticker indicator
03/13/2008 3IINFOTECH -8
03/25/2008 3IINFOTECH -5
03/27/2008 3IINFOTECH -3SQL> CREATE TABLE BORRAME(FECHA DATE, INDICA VARCHAR2(100));
Tabla creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/13/2008','MM/DD/YYYY'), '3IINFOTECH -8');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/18/2008','MM/DD/YYYY'), '3IINFOTECH -4');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/25/2008','MM/DD/YYYY'), '3IINFOTECH -5');
1 fila creada.
SQL> INSERT INTO BORRAME VALUES(TO_DATE('03/27/2008','MM/DD/YYYY'), '3IINFOTECH -3');
1 fila creada.
SQL> COMMIT;
Validación terminada.
SQL>
SQL> SELECT FECHA, INDICA
2 FROM BORRAME
3 WHERE SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) <> '4'
4 ORDER BY SUBSTR(INDICA,INSTR(INDICA,'-',1)+1,LENGTH(INDICA)) DESC;
FECHA
INDICA
13/03/08
3IINFOTECH -8
25/03/08
3IINFOTECH -5
27/03/08
3IINFOTECH -3
-
Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online>???
any one else having troble??
please help
I need my mailHello, DragonStudios.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Jason H. -
Please help for User defined extension functions
the tutorial given for extension functions doesn't work as well as our new functions
even though i follow all the given steps and see the functions in my user defined extension functions tab in xslt map.
all the target nodes that use the extension function disappear in the resulted target xml.
please help.have you compiled your java file and uploaded the jar file(containg the .class file and the Manifest.MF file) in the <OC4J_HOME>\j2ee\home\applib directory and then restarted the server??
-
Please help for using perform in SAP script
As subject.
My sap script code as below:
/: PERFORM GET_CHAMT_DATE IN PROGRAM ZRAP004
/:USING &SPELL-WORD&
/:CHANGING &SPELL-WORD&
/:ENDPERFORM
My program ZRAP004 code as below:
FORM get_chamt_date USING u_iword TYPE spell-word
CHANGING u_oword TYPE spell-word.
CONCATENATE u_iword '元整'(t01) INTO u_oword.
endform.
This form is for check printing.
It's by standard function 'F110' to excute check printing.
But when i finished this transaction. System return error message as below:
<b>This routine contains 2 formal parameters, but the current call
contains 4 actual parameters.</b>
Please help. Thanks a lot!!Hiii
PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM. -
Hello,
Suppose i have a input xml:
<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>
Now I want output as:
<Header>XYZ</Header>
<Body><![CDATA[<Name>XYZ</Name>
<Roll>12</Roll>
<Class>3</Class>]]>
</Body>
Please help how will I do that......whole payload is going in Body also some value in above payload is mapping.
Can anyone give me UDF to send whole payload in one node
Thanks and Regards
Hemantthis can be achieved easily by aXSLT mapping....also can be achieved by using grahical mapping
For XSLT coding:
creation of CDATA with message mapping
For graphical + XSLT: /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
Regards,
Abhishek. -
Kind Attn:OTN Customer Team PLEASE HELP FOR LOGIN
I have seen lot of members are facing login problem with old username/password.
I am facing the same.I am unable to login with old username/password "dmewani/*******" .Please reset my account.
even after coping "username/password" from email received from "orcle", problem is same.
Please Help.Hello,
Thanks for your help. Yes this could help but as I already has the licencees, I just need someone at Adobe's who could generate the keys ,... but after hours between Adobe and my reseller ; each one says to contact the other I'm getting crazy ...
Aynwas, thanks very much for your help -
Please help for ORA-02049 - Timeout error
Hi All,
we have got a reporting DB and 14+ Application DBs, the data is extracted from all the application databases (DBs) and dumped into the common tables of reporting database. While inserting and updating the common reporting tables the other jobs gets timeout error and fails. We daily face this failure problem (error: ORA-02049 - Timeout error distributed transaction waiting for lock) for almost 10-15 times.
Can you please help me out in resolving and getting the permanent solution for this problem.
Thanks in advance.Thanks Kamal,
as mentioned above, I have got Oracle,Java,Unix environment. Autosys jobs are scheduled through out the day.
Mechanism : Autosys job triggers the action at specified time, Unix code calls oracle packaged procedure, extracts data and puts into the common reporting table from this data java code formats the report output.
There are separate reporting jobs for all instances though the report is same but for different locations(14 DB instances).
and all these reporting jobs dump data into common reporting table, data can be differentiated on the hub or location.
But if one job is running for first instance then second job waits for the lock and fails after 2 mins.
I have to avoid this situation, I hold I am able to explain the situation. -
Please help for Registration point to a movieclip/sprite
I am new to AS3 and have a doubt on Registration point for
Movie clip / Sprite. Please help me the sample code for this
I simply draw a line using AS3 in flash environment. but i
used graphics.moveTo for center. but if i run this it is simply
taking x,y axis 0,0 and move around the stage. I want to move this
from center of the stage. please help.
below is my code
var line:Sprite = new Sprite()
addChild(line);
var cx:Number = stage.stageWidth/2;
var cy:Number = stage.stageHeight/2;
var radius:Number = 1;
var increase:Number = 0;
line.graphics.lineStyle(1, 0xff00ff);
line.addEventListener(Event.ENTER_FRAME, onEnter);
function onEnter(event:Event):void
increase += radius;
//trace(increase);
//line.graphics.moveTo(cx, cy);
line.graphics.lineTo(cx + increase, cy + increase);
line.rotation += 0.1;to appear to control the registration point of line, make it
a child or an empty display object and offset it by -x,-y where x,y
is your choice for the apparent registration point. you can then
control the parent object and it will behave like your line with
changed registration point. -
Please Help for RME fireface400 with Logic Studio 8
Please I do ask help for configuration of audio interface RME fireface400 with iMac OS 15.5.5, I have problem in output 7/8 monitor phones(no sound or crack sound) and look Fireface Mixer in to the desktop monitor. Where is the problem? I have drive 2.62a.
Thanks for answer, also in Italiano
GrazHave you tried the RME userforum?
http://rme-audio.de/forum/index.php
Maybe you problem is running OS 15.5.5 - must be a beta version -
Please help for some reason i cannot slide to unlock my ipod
please help i cannot get my ipos to slide to unlock
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
SQL experts please help for a query
I have following table1.
What query can give the result as given below, SQL experts please help on this.
TABLE1
Event DATETIME
in 2/JAN/2010
out 2/JAN/2010
in 13/JAN/2010
out 13/JAN/2010
in 5/JAN/2010
out 5/JAN/2010
RESULT REQUIRED FROM THE SQL QUERY
COL1_IN COL2_OUT
2/JAN/2010 2/JAN/2010
13/JAN/2010 13/JAN/2010
5/JAN/2010 5/JAN/2010I tried to help, but this puzzles me.
Why is this not returning pre-selected set of rows, why it's doing some merge join cartezian ?
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from table1;
EVENT DATETIME
in 2/JAN/2010
out 2/JAN/2010
in 13/JAN/2010
out 13/JAN/2010
in 5/JAN/2010
out 5/JAN/2010
6 rows selected.
SQL> explain plan for
2 with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
Explained.
SQL> set wrap off
SQL> set linesize 200
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 185132177
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 9 | 288 | 8 (0)| 00:00:01 |
| 1 | MERGE JOIN CARTESIAN| | 9 | 288 | 8 (0)| 00:00:01 |
|* 2 | TABLE ACCESS FULL | TABLE1 | 3 | 48 | 3 (0)| 00:00:01 |
| 3 | BUFFER SORT | | 3 | 48 | 5 (0)| 00:00:01 |
|* 4 | TABLE ACCESS FULL | TABLE1 | 3 | 48 | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
2 - filter("EVENT"='in')
4 - filter("EVENT"='out')
Note
- dynamic sampling used for this statement
21 rows selected.
SQL> with a as
(select datetime from table1 where event='in'),
b as
(select datetime from table1 where event='out')
select a.datetime COL1_IN ,b.datetime COL2_OUT from a,b ;
COL1_IN COL2_OUT
2/JAN/2010 2/JAN/2010
2/JAN/2010 13/JAN/2010
2/JAN/2010 5/JAN/2010
13/JAN/2010 2/JAN/2010
13/JAN/2010 13/JAN/2010
13/JAN/2010 5/JAN/2010
5/JAN/2010 2/JAN/2010
5/JAN/2010 13/JAN/2010
5/JAN/2010 5/JAN/2010
9 rows selected.
SQL> -
Hello ,
i tried to update my Mobile Nokia . the update is available but can not complate and come this message
CONFIGURATION ERROR
Nokia Softwear updater has detected a configuration error for more help click here
and if i want to click no help ... look at this photo please
(Nokia 3110C v 7.01 )
i make the fire off but it come the same
Please help
thank you
Solved!
Go to Solution.richfolkes wrote:
I have tried again, and failed again. Uninstalled, restarted, reinstalled. Fat lot of good that did.
Firewall or no firewall, connected to my router or directly connected to the modem. It is totally diferenceless. There is nary a single port that is open.
I cannot for the absolute, uttermost life of me get NSU to work, period! There is no way on the planet I can resolve this configuration error, 'sno use! The only thing left to do is accept this for the fact of life it is.
I am totally sorry for having the sheer temerity, nerve and gall to be bothering you about this.
As a last resort richfolkes, make sure you have a look at the Pool of Knowledge article regarding this subject!
Problems with USB connection or PC Suite
Maybe this´ll help you!
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good. -
Please help for create index for table in db2
Dear Consultants,
Our Production Servers have a problem, when user input materials in t-code VA01, the check data take long time to complete.
I was create a incident on SAP Portal and they recommended to create a new index on table:
VBRP in the order MANDT, AUBEL and AUPOS.
but we don't sure how to do this, please help us !
The SAP consultant message:
" It was identified that there is one SQL statement which was
responsible for the majority of the time spent during the VA01
transaction. It accounted for around 49 seconds.
The SQL statement was analysed and a selectivity analysis was carried
out on certain fields specified in the WHERE clause. The statement is
currently executed via a full table scan which is not an efficient
access. It is therefore recommended to create a new index on table
VBRP in the order MANDT, AUBEL and AUPOS. "
Our System Landscape IS : DEV -> QAS -> Production and DataBase server : db2 9.07 , SAP ECC 6.0, windows server 2008
Thanks and Best Regards,
Hien NguyenHi Deepak,
Could you please tell me the places where can i post the message for ABAPer, i don't know to choose : ABAP Development , ABAP Testing and Troubleshoo… or somthing else
Sorry for my amateur !
Thanks you very much.
Best Regards,
Hien
Maybe you are looking for
-
hi sapgurus, plz solve my problem While goods issue using MIGO system giving this error 1) G/L account 891000 does not exist in company code 1000 2) when I created g/l account 891000 using T.Co.FS00 system giving this error Account 8910
-
I've tried: Tell application "Microsoft Word" insert rows at bottom of table 2 of active document end tell with no luck? I've also tried various oher permutations. Would some be able to help with this? Thanks
-
Browsers do not remember realm authentication details
Hello, When I try to access pages in a protected realm, I sometimes have to enter the username nad password 5 or more times. Sometimes just twice. Even if I tell my browser to remember the password/username, it still prompts me to authenticate later
-
Plasma TV 1080p as Monitor?
I am looking for a Plasma TV as a 2nd monitor for my Macbook Pro i7 16GB with Thunderbolt I was looking for a monitor maybe an older ACD 30" but I know of someone who uses and recommends a Panasonic Plasma 1080i or 1080p (?) TV as a monitor? Does any
-
Condition extension unit-of-measure in pricing of shipment cost
请问scale中有一个 Calculation Type = C,这个是如何使用的? Quantity that the amounts or percentage rates of the linear proportional rate refer to, which is created when the condition records are maintained. 其中的 the linear proportional rate 的计算公式是什啊?