Please help; Getting annoying message

Hello,
I bought my first Mac about 2 months ago. It is a PowerBook G4 with a 1.67 GHz PowerPC G4 processor and 2 GB DDR2 SDRAW Memory. The hard drive is 111GB with 68 GB free. The operating system is Mac OS X Version 10.5.6.
The reason I am writing is I caused myself an annoying problem. Every time I startup the computer or wake it from sleeping I get a message 4 or 5 times then it stops until the next time I wake the computer or reboot it. This is the message I am getting;
"Internet Connect"
"Could not open the communication device".
It came about after I turned the Bluetooth on and configured my A707 Sync phone to connect to my Mac via Bluetooth. I needed to get some pictures off the phone. Ever since I did that I keep getting that annoying message and I have to hit okay on the message to get rid of it each time. Sometimes it comes up and I do not notice it because I am looking at the key board typing. Of course everything I just typed was not added because I needed to okay the message first. It is very annoying.
I have since deleted my phone and turned off the Bluetooth, but I still keep getting the message. If anyone has an ideas how I can get rid of this message I sure would appreciate the help. Please keep in mind I do not have any of the restore disks. I bought my Mac used. I did order a Firewire External hard drive to back it up. I hope to have this problem solved first.
Any help and suggestions are welcome!
Thanks,
James

you could try moving either file one at a time, don't delete them though
if moving the files and restarting does not fix the problem you can always put them back to the original location, it's just settings files
possibly you'd need to setup your network prefernces again
also, in System Preferences, click on Accounts pane, then your user name (you may need a password for that)
on the right side of the Accounts window there is "Login Items" tab, see if anything shows up in login items
as a guess, machine tries to connect by looking for your cell phone to use as a modem or something
maybe check Network preference pane, see what shows up in Bluetooth

Similar Messages

When syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller my 16g phone has 3G of other please help get rid of it

iitWhen syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller my 16g phone has 3G of other please help get rid of it

The following has some information that may help: http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

I can't use my apple account in my Iphone please help me a message appear said"This ID has not used in the iTunes Store"

Hello, BaraaBa.
Thank you for visiting Apple Support Communities.
This sounds like your Apple ID has not yet been used with the iTunes Store. Here is an article that I would recommend going through when experiencing this issue.
Use your Apple ID with the iTunes Store
Open the latest version of iTunes.
Choose Store > Sign In.
Enter your Apple ID and password and click Sign In.
Click Review when asked to review your information.
Enter your billing information.
Click Continue after you enter your credit card and billing information. You can remove or edit your credit card information at any time. Learn more about updating your iTunes Store account information.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/HT2589
Cheers,
Jason H.

TS4085 I reboot my router updated to IOS 5, still NO on/off selection for mirroring..please help getting disappointed

I reboot my router updated to IOS 5, still NO on/off selection for mirroring..please help getting disappointed

What are you trying to mirror from? Mirroring from your Mac won't be available until Mountain Lion 10.8 www.apple.com/macosx/mountain-lion/
Setting up and troubleshooting AirPlay Mirroring
support.apple.com/kb/TS4085

Please help with txt message issue

i am a prepaid client with no data on my plan so i have my data shut off on my iphone 4, so when i am not in wifi range and send a message to other iphone friends as a txt message (not Imessage). they are not recieving until i get back to wifi and then send as an imessage. Please help!!!!

Turn off iMessage on the phone.

Please help me regarding message error in GPShell 1.4.2

Hi friends..
i've a GPShell script like this :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
delete -AID a00000006203010c0101
delete -AID a00000006203010c01
delete -AID a00000006203010c0101
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
card_disconnect
release_contextI've got this message, when i tried to load .CAP file into Infineon Java Card 2.2.1, using that script..
C:\GPShell-1.4.2>GPShell helloInstall.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008205277E9B29D125200
Wrapped command --> 8050000008205277E9B29D125200
Response <-- 0000715457173C2A8FC1FF020005BD1A6BE9D3D5CA5B9E40FE02CCC89000
Command --> 8482010010D1F2701CAF9446D519A038D76716189C
Wrapped command --> 8482010010D1F2701CAF9446D519A038D76716189C
Response <-- 9000
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01011D36CBB3988EDA8E00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c01
Command --> 80E400800B4F09A00000006203010C0100
Wrapped command --> 84E40080134F09A00000006203010C0177FE477BAC9DC31100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01014D90396A020CB8FE00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
file name HelloWorld.cap
Command --> 80E602001F09A00000006203010C0107A0000000030000000AEF08C60201A8C80201
F40000
Wrapped command --> 84E602002709A00000006203010C0107A0000000030000000AEF08C60201
A8C80201F4009F5FC8A422FC295C00
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)There's message error :
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I've tried to use another Infineon Java Card 2.2.1, but the result is always same..
Please help me
Thanks in advance..

hi ,
ther is not syntax with clear with 'X".
but you can do one thing to get the one character.
REPORT ZMKTEST6.
data : f1(2) type c,
f2(2) type c,
f3(10) type n value '12345'.
clear: f1 with 'X', "Comment this
f1 = f1+0(1). "write this
f2 with f1,
f3 with '3'.
write :/ f1 ,f2, f3.
now f1 containd one charater instead of 2.
now you can display as usuall

Please Help! Error Message, Can't Uninstall or Open

I have itunes on a newer computer. It recently stopped opening and I get "This action is only valid for products that are currently installed." I get this SAME message when trying to uninstall itunes. I try and install a new version over it, same message. PLEASE HELP. I don't want to have to reformat my computer, but I'm feeling almost like it is the only way to do it.

Use this microsoft installer cleanup tool to get reid of itunes, then quicktime.
http://support.microsoft.com/kb/290301
Then try a fresh iTunes install.

Please Help! Error message: Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number.???

My old PC crashed and died, and I am unable to deactivate the licence of Photoshop Elements 7.
I re-installed Photoshop Elements 7 via a trial download from Adobe website onto my new PC, Windows 8.1 single language.
My serial number is not accepted.
Error message: 'Incorrect serial number, The serial number you entered is not valid. Click OK to retry serial number'.
Customer help care is not helpful and keep ending my chat before I get a solution.
Can someone please help me and let me know how I can rectify this problem!!!

Thank you Benjamin MItchley. I reviewed the chat log and I can confirm that they are correct we do not provide installation support for Photoshop Elements 7 due to the age of the software title. Photoshop Elements 7 also does not support activation so there is no risk that you were unable to deactivate the software on your previous computer.
I am showing the serial number under your account was provided from an equipment manufacturer. It is possible there may have been a customized installer for that version. Have you contacted the computer manufacturer to obtain the installation files for the copy of Photoshop Elements 7 included with your computer?
Since you did not migrate/transfer over any files it is unlikely there is a software issue preventing the installation. You can try running the CC Cleaner Tool to ensure that no corrupt licensing files may be preventing the installation process. You can find details of the use of the CC Cleaner Tool at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

Please help getting invalid number error.

Hi Experts,
My requirement is
If DT_ID value of xmlmsg existed in the DT_ID of PART_ID_COLLES table then that record should be processd else should be skipped.
And xmlmsg of PART_ID should start with "A" and followed only by the number then that record should be processed else should be skipped.
And xmlmsg of DD_DAYS should contain only the number and grater than or equal to 0 ,then that record should be processed else should be skipped.
For that I have written this code.
But if I pass dt_id as string value in xmlmsg I am getting invalid number error.
DT_ID of PART_ID_COLLES table is number data type.
SELECT xmlmsg.part_id part_id,xmlmsg.dd_days dd_days,xmlmsg.dt_id dt_id
                  FROM XMLTABLE(
                        XMLNAMESPACES(
                            'urn:schemas-microsoft-com:rowset' as "rs"
                          , '#RowsetSchema' as "z"
                        '/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
                        PASSING p_dd_days_vals
                        COLUMNS
                            ITEM_NO             for ordinality
                          , dt_id    VARCHAR2 (20) path '@dt_id'
                          , part_id VARCHAR2 (25) path '@part_id'
                          , dd_days VARCHAR2 (20) path '@dd_days'
                       ) xmlmsg,
                       part_id_colles pic
                       WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
                             AND REGEXP_LIKE (UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
                             AND (TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
                             AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$') ;
Sample message is
<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>
Please help me.
Thanks.

Your code has ton of errors. Anyway:
with part_id_colles as (
                        select 430 dt_id,xmltype('<MESSAGES>
<MESSAGE ID="12345">
<MSG_ID>3026900</MSG_ID>
<DT_POSTED>6/20/2013 08:15:48</DT_POSTED>
<POSTED_BY>GPD_MSG_EXTRACTOR</POSTED_BY>
<DT_LAST_QUEUED />
<MSG>
<WORK_SET TRANSACTION_ID="@TRANS_ID" TRANSACTION_TYPE="Batch" IS_ACID="@IS_ACID">
<WORK_UNIT GROUP="dd_days" ACTION="ADD" AFFECTED="dd_days">
<RECORDSET TABLE_NAME="dd_days">
<xml xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema">
<rs:data>
<z:row dt_id="430" part_id="A5556689" dd_days="10"/>
<z:row dt_id="550A" part_id="A8889965" dd_days="20"/>
</rs:data>
</xml>
</RECORDSET>
</WORK_UNIT>
</WORK_SET>
</MSG>
</MESSAGE>
</MESSAGES>') p_dd_days_vals from dual)
SELECT xmlmsg.part_id part_id,
        xmlmsg.dd_days dd_days,
        xmlmsg.dt_id dt_id
FROM part_id_colles pic,
        XMLTABLE(
                 XMLNAMESPACES(
                               'urn:schemas-microsoft-com:rowset' as "rs",
                               '#RowsetSchema' as "z"
                 '/MESSAGES/MESSAGE/MSG/WORK_SET/WORK_UNIT/RECORDSET/xml/rs:data/z:row[not(@dt_id=following-sibling::z:row/@dt_id and @part_id=following-sibling::z:row/@part_id)]'
                 PASSING p_dd_days_vals
                 COLUMNS
                    ITEM_NO             for ordinality,
                    dt_id    VARCHAR2 (20) path '@dt_id',
                    part_id VARCHAR2 (25) path '@part_id',
                    dd_days VARCHAR2 (20) path '@dd_days'
                ) xmlmsg
WHERE REGEXP_REPLACE(TRIM(xmlmsg.dt_id),'^([0-9]+)$|.','\1') = pic.dt_id
    AND REGEXP_LIKE(UPPER(TRIM(xmlmsg.part_id)),'^[A][0-9]+$')
    AND TO_NUMBER(REGEXP_REPLACE(TRIM(xmlmsg.dd_days),'^([0-9]+)$|.','\1')) >=0
    AND REGEXP_LIKE(TRIM(xmlmsg.dd_days), '^-?[[:digit:],.]*$')
PART_ID                   DD_DAYS              DT_ID
A5556689                  10                   430
SQL>
SY.

Forum Moderator Please help find my message

Dear Forum Moderator:
Yesterday (09.20.08) I placed in the FLASH General Discussion
forum a message about problems in using Flash in my User's account.
I do not remember the exact title but there were words: user,
account, counterproductive.
The message was authored by my screeen name Fonarik
I DID see this morning this my message, but after I signed
off and then back again I can NOT find it.
Please help to find it, as I hope to get help on my problems.
Thank you

Fonarik wrote:
> Urami:
>
> You are not correct in: "I only see one post by you,
this very post
> and nothing else ever posted from this nick name".
> Please look at my message above and to the LEFT. You
will see that I posted
> TWO messages: the one that disappeared (or was
deliberately taken away as NOT
> PLEASANT to Adobe) and this my asking for finding it.
>
> By the way please clarify what you mean by applying to
other spots - I do not
> understand.
>
> Thanks for attention
Not going to try to prove my point, just look at the obvious:
This is the NEWS READER screen, loading messages directly
from the Adobe News Server.
View forum by user name, only two posts, the first one "Forum
Moderator..." and
the reply to my post just now:
http://flashfugitive.com/stuff/sc_01.gif
My news reader has copies of posts for past 3 years.
Then by browsing Web Based Forum, searching for all the
threads by your user name:
http://flashfugitive.com/stuff/sc_02.gif
Just one... in past 90 days...
Don't believe in "shoosh" conspiracy theories. Adobe (and
previously Macromedia) never
suppress any posts. In fact they encourage posts dealing with
all kind of issues because
it helps the tech guys to learn about problems they could
over look during very compressed
and short testing period.
You simply post it incorrectly and it never made to the
forum. Just post once again
because no matter where you believe in, there simply isn't
any other, beside this one, posts
from you on the forum.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Please help - strange error message when trying to download i tunes

Hi
When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar. I have tried all thr suggestion on the web, deleted i tunes and quicktime, deleted temp folders and even changed the settings in myconfig, but what ever i do i still get the same message!
HELP PLEASE

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please Help Get a Color from Pixel !!!!

Is anybody know how to get a Color from pixel.
My program is not Full Screen .
So i think Robot.getPixelColor() don't suitable.
Please Help me!

Robot.getPixelColor() will work fine, but the problem you will have is getting the mouse set to the correct location and getting your application to know where it is: you can do it with win32 calls and JNI. Here are a few that I have found helpful--they are in a VB format:
Public Const CLR_INVALID = &HFFFF 'not a valid pixel
Public Const MOUSE_MOVED = &H1
Public Const MOUSEEVENTF_ABSOLUTE = &H8000 ' absolute move
Public Const MOUSEEVENTF_LEFTDOWN = &H2 ' left button down
Public Const MOUSEEVENTF_LEFTUP = &H4 ' left button up
Public Const MOUSEEVENTF_RIGHTDOWN = &H8 ' right button down
Public Const MOUSEEVENTF_RIGHTUP = &H10 ' right button up
Public Const REQUEST_LEFT_CLICK = &H2D 'request left click "-"
Public Const REQUEST_RIGHT_CLICK = &H2B 'request right click "+"
Type POINTAPI
x As Long
y As Long
End Type
Type POINTSTRUCT
hwnd As Long
hdc As Long
ptAbsolute As POINTAPI
ptOrigin As POINTAPI
ptLocal As POINTAPI
ptColor As Long
sType As String
retMessage As Boolean
End Type
Declare Function GetCursorPos _
Lib "user32" (ByRef lpPoint As POINTAPI) _
As Long
Declare Function SetCursorPos _
Lib "user32" (ByVal x As Long, ByVal y As Long) _
As Long
Declare Sub mouse_event _
Lib "user32" (ByVal dwFlags As Long, _
ByVal dx As Long, _
ByVal dy As Long, _
ByVal cButtons As Long, _
ByVal dwExtraInfo As Long)
Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Declare Function GetMessageExtraInfo Lib "user32" () As Long
Declare Function GetPixel Lib "gdi32" (ByVal hdc As Long, _
ByVal x As Long, _
ByVal y As Long) As Long
Declare Function WindowFromPoint Lib "user32" (ByVal xPoint As Long, _
ByVal yPoint As Long) As Long
Declare Function GetWindowDC Lib "user32" (ByVal hwnd As Long) As Long
Declare Function GetWindowOrgEx Lib "gdi32" (ByVal hdc As Long, _
ByRef lpPoint As POINTAPI) As Long

Please help with error message while trying to update i tunes

Errors occurred while installing the updates, if the problem persists, choose tools, download only and installing manually

When i try and download i-tunes i get a message about URBCHN1 not being a win32 command, or something similar.
... that's an unusual one.
could you possibly send us a screenshot of the error message box? for instructions, see the following user tip:
hudgie: Taking screenshots to help with problems

Please help. Error message on desktop iMac reads: "Unable to update Firefox. Please see your administrator."

Hi. My last update was March 27, 2015. Just last month. I keep getting error messages that say Firefox cannot update. I've read this makes it a security issue if it won't allow Firefox to update. Please assist. Thanks.

If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox application and save the disk image file to the desktop
*Firefox 37.0.2: https://www.mozilla.org/en-US/firefox/all/
*Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
*Install the new version that you have downloaded
*https://support.mozilla.org/kb/Installing+Firefox+on+Mac
Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install or update Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Itunes doesnt recognize Ipod, please help, getting frustrated!!

OK today I plugged my ipod into my computer to update it and magically it started updating, i dont know what I did but it updated the stuff that i have added recently. Yesterday it wouldnt update and it hasnt updated for the past 2 weeks. Now after adding a couple of more songs i go to update it again and nothing happens, now what is going on, I have uninstalled and reinstalled both the ipod updater and the itunes updater, the latest software is on my ipod, i reset my ipod because it froze last night, i dont know what to do, I am close to taking it to the apple store but im not sure what they could do about it. Is there something in itunes that I need to click so my ipod will be recognized, this is getting very frustrating, my ipod use to update every single time that I plugged it in, my computer is fairly new but my ipod has worked several times on this computer before, so please anyone HELP ME!!

i am having the same problem and i am going insane. It i had my ipod since christmas and never had a problem till this week. When i plug it in the ipod displays the "Do not Disconnect" but itunes doesnt pop up or show that the ipod is plugged in. When i try to update it the updater also says that the ipod isnt plugged in. I know have lost all the songs in my ipod but they are still in my itunes but it wont update. Somebody please help, its been about 4 days and im going crazy.

Please help; Getting annoying message

Similar Messages

Maybe you are looking for