Please help getting WRT300N and BEFSR81 to work together

I recently purchased ten WMP300N wireless adapters to install and run off of a WRT300N that I have used for about a year and has worked fine. I also use a BEFSR81 router. It also has always worked fine. I am upgrading our PCs and going from Win2000 to WinXP. The WRT300N worked fine w/the older machines but is not working with the newer (XP) machines. I have updated firmware and drivers on everything and that has not helped. I have tried both the Windows wireless configurer and the Linksys wireless monitor and neither works. I have tried re-wiring from the cable modem to both routers every possible way and nothing. I am guessing that there is a IP conflict here and perhaps a static IP would help?? Any help or feedback would be greatly appreciated. Thank you.
Mark

let me know how are the two routers connected....which one is connected to the modem and how is the second router connected to the first router ...

Similar Messages

  • [SOLVED] Can't get ccache and colorgcc to work together

    Hi all,
    Has anyone figured out how to get ccache and colorgcc to work at the same time?  I can only get one or the other, but not both.
    If I put them both in the path, with colorgcc first, then "g++" invokes colorgcc, which then calls /usr/bin/g++, skipping ccache.
    If I put ccache first in the path instead, then running "g++" invokes ccache, which then calls /usr/bin/g++, skipping colorgcc for some reason.
    Putting colorgcc back to first in the path, then editing /etc/colorgcc/colorgccrc means I can set the compiler paths to point to ccache.  However then running "g++" invokes colorgcc, which calls ccache, but then ccache seems to call colorgcc again, which calls ccache, which calls colorgcc, etc, etc.
    Perhaps I'm missing something, but I can't see how you tell ccache where the compiler binaries are located, as this seems to be the problem - ccache autodetects them, and always seems to pick the ones I don't want!
    Any suggestions?
    Last edited by Malvineous (2011-05-03 01:29:48)

    Ha, ok, as usual as soon as I post in a forum I stumble across the answer.  Turns out there's a CCACHE_PATH environment variable you can use to tell ccache where to look for the real compilers.  It doesn't seem to work setting this to point to colorgcc, but putting only colorgcc in the path, editing /etc/colorgcc/colorgcc to point to ccache, then setting CCACHE_PATH=/usr/bin seems to do the trick...
    But if there's a better way please let me know!

  • HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    please help - installed IOS7 and now I am having problems playing Words Free on my Iphone.  It gives me a pop up telling me to connect to ITunes but will not connect.  Cannot get out and have to continually shut down my phone and start over.

    Hi, jeantwin.
    Thank you for visiting Apple Support Communities.
    The steps in the article below may help you resolve the issue with push notifications.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    If the issue persists, try signing out of your Apple ID and then sign back in.
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/HT1311
    Cheers,
    Jason H.

  • I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

    I have been able to access a site regularly but in the last few days get a message: "cookies required to access this site." please help, I use this site for work daily:)

    Goto > Settings > Safari... Enable Cookies > Always
    Good luck!

  • When syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller  my 16g phone has 3G of other please help get rid of it

    iitWhen syncing my iPhone the storage says OTHER what is other and how do you delete it or make it smaller  my 16g phone has 3G of other please help get rid of it

    The following has some information that may help: http://osxdaily.com/2013/07/24/remove-other-data-storage-iphone-ipad/

  • Please Help Get a Color from Pixel !!!!

    Is anybody know how to get a Color from pixel.
    My program is not Full Screen .
    So i think Robot.getPixelColor() don't suitable.
    Please Help me!

    Robot.getPixelColor() will work fine, but the problem you will have is getting the mouse set to the correct location and getting your application to know where it is: you can do it with win32 calls and JNI. Here are a few that I have found helpful--they are in a VB format:
    Public Const CLR_INVALID = &HFFFF 'not a valid pixel
    Public Const MOUSE_MOVED = &H1
    Public Const MOUSEEVENTF_ABSOLUTE = &H8000 ' absolute move
    Public Const MOUSEEVENTF_LEFTDOWN = &H2 ' left button down
    Public Const MOUSEEVENTF_LEFTUP = &H4 ' left button up
    Public Const MOUSEEVENTF_RIGHTDOWN = &H8 ' right button down
    Public Const MOUSEEVENTF_RIGHTUP = &H10 ' right button up
    Public Const REQUEST_LEFT_CLICK = &H2D 'request left click "-"
    Public Const REQUEST_RIGHT_CLICK = &H2B 'request right click "+"
    Type POINTAPI
    x As Long
    y As Long
    End Type
    Type POINTSTRUCT
    hwnd As Long
    hdc As Long
    ptAbsolute As POINTAPI
    ptOrigin As POINTAPI
    ptLocal As POINTAPI
    ptColor As Long
    sType As String
    retMessage As Boolean
    End Type
    Declare Function GetCursorPos _
    Lib "user32" (ByRef lpPoint As POINTAPI) _
    As Long
    Declare Function SetCursorPos _
    Lib "user32" (ByVal x As Long, ByVal y As Long) _
    As Long
    Declare Sub mouse_event _
    Lib "user32" (ByVal dwFlags As Long, _
    ByVal dx As Long, _
    ByVal dy As Long, _
    ByVal cButtons As Long, _
    ByVal dwExtraInfo As Long)
    Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
    Declare Function GetMessageExtraInfo Lib "user32" () As Long
    Declare Function GetPixel Lib "gdi32" (ByVal hdc As Long, _
    ByVal x As Long, _
    ByVal y As Long) As Long
    Declare Function WindowFromPoint Lib "user32" (ByVal xPoint As Long, _
    ByVal yPoint As Long) As Long
    Declare Function GetWindowDC Lib "user32" (ByVal hwnd As Long) As Long
    Declare Function GetWindowOrgEx Lib "gdi32" (ByVal hdc As Long, _
    ByRef lpPoint As POINTAPI) As Long

  • My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

    My wifi Don,t work on iOS 6 iPad 3 Please help me, My wifi Don,t work on iOS 6 iPad 3 Please help me

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.

    Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.

    Playlists only exist as part of the larger iTunes library listing so if you are not seeing it there it doesn't exist anywhere else.  I know with my older version of iTunes it is very easy to accidentally delete a playlist.  With newer versions it may be possible to recover it with the undo feature in the menu but this likely will only work immediately after the deletion.

  • Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit. Any ideas?

    Need help getting Adobe OnLocation CS3 to work with windows 7 64 bit.  The program installed ok and the S/N took.
    The program does record video and audio HDV M2T.
    The problem is video doesn't display or play back on the monitor component @ 16:9 or 720 p.  4:3....
    The scopes respond as do the audio components when recording. (with a blank monitor component).
    The video does play back on my system no problem.
    Any ideas?
    Dan

    Moving the discussion to OnLocation
    Thanks,
    Atul Saini

  • Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

    Found these instructions here:
    https://discussions.apple.com/message/15388885#15388885
    I found an answer that worked for me. I am using an iMac.
    (1) Sign out of the iTunes store
    (2) Open a NEW account with a new Apple ID
    (3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
    (4) Go to RECOMENDATIONS & PING POSTING
    (5) Turn on Genius there
    Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
    Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
    Worked for me.

  • Please help Apple??? It worked fine with Snow Leopard??

    I recently upgraded to Lion and now cant see my Windows 7 laptop in network? Or see my macbook Air 2010 on my win7 laptop. Please help Apple??? It worked fine with Snow Leopard??

    You're not addressing Apple here, you are addressing a user based community.  An Apple employee may read your post but he/she will not officially respond to it.
    You didn't say if your networking is Wi-Fi or USB Dongle based so I'm assuming Wi-Fi in this response. If you do a search of the forums you will find that quite a few are having Wi-Fi issues with Lion--things that worked fine with Snow Leopard are flakey or don't work at all with Lion so your problem may be another instance of the Wi-Fi issues in Lion.  If not, then perhaps someone with knowledge of your specific issue will post.  I see my other Macs (MBP, 24" iMac, 27" iMac all running Lion) fine but I don't have a PC to test.

  • PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC

    Dear Adobe Community,
    I got my first imac a few days ago, and i decided to install Adobe CC.
    When i want to run Adobe Bridge, says "the operation could not be completed", the same happens with Adobe After Effects.
    And I also have a problem with Premiere, when i want to export a project says that premiere must close.
    This is the try version, is this a problem of Adobe or Apple? i'm very worried
    Help!
    Thank you!
    Ivana

    Muchas gracias!!! Ha funcionado!
    El 11/02/2014, a las 00:02, Federico Platon <[email protected]> escribió:
    Re: PLEASE Help! - Bridge and Premiere CC- "the operation could not be completed" and export error - MAC
    created by Federico Platon in Foros de usuario a usuario - View the full discussion
    Confirma que se trata de una cuestión de permisos.
    Por cierto te aconsejos actualices la 9.1  a 9.2, posiblemente se habría arreglado así también.
    Bueno los pasos son:
    2. Select Go from the Finder Menu.
    3. Select Computer.
    4. Select Macintosh HD.
    5. Select Users.
    6. Select your user profile.
    7. Right click on user profile. Select Get Info.
    8. Go to bottom and unlock with admin password to make changes.
    9. Make sure your user profile has Read and Write privileges by selecting from dropdown menu.
    10. Go down to wheel at very bottom and select Apply to enclosed items. This should allow Adobe Bridge to run properly.
    Creo que no se necesita traducción.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6107188#6107188
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6107188#6107188
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6107188#6107188. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Foros de usuario a usuario at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • TS4085 I reboot my router updated to IOS 5, still NO on/off selection for mirroring..please help getting disappointed

    I reboot my router updated to IOS 5, still NO on/off selection for mirroring..please help getting disappointed

    What are you trying to mirror from? Mirroring from your Mac won't be available until Mountain Lion 10.8  www.apple.com/macosx/mountain-lion/
    Setting up and troubleshooting AirPlay Mirroring
    support.apple.com/kb/TS4085 

  • HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    please help my ipad min is not working on the scren it says iPad disabled connect to itunes

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Can't get headers and footers to work - after I enter something (page

    I can't get headers and footers to work - after I enter something (page #, etc) it will show up on the first page but not subsequent pages - what am I doing wrong?!

    Inspector > Layout > Section > Use previous headers and footers
    Peter

Maybe you are looking for