Please help! Grey screen on Macbook Pro 15"

Good morning to all!
Last night, suddenly my Macbook pro 15" shut down. When I tried to restart, I got just a grey screen.
I already tried all commands to recover my mac back, when a boot at single mode and use fsck I got a lot of errors. (I tried more than 15 times and still got errors!)
I tried to boot with my Snow Leopard DVD, but got a blue screen.
I'm thinking in buy a new hard drive to start a fresh new instalation. By the way, my OS is the new Maverick.
What should I do?
I appreciate any help!
Marcello Lima

The boot drive is failing, or there is some other hardware fault.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Similar Messages

  • Please Help!!!  Macbook Pro Won't Boot Up

    I purchased a new Unibody Macbook Pro about 2 months ago, and I haven't had any problems with it up til now. When I power it on, it stays at the white startup screen with the Apple logo, and the spinning loading circle. After a few mins, I touched the trackpad, and a grey background comes up and it says "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again" Of course I did this, and it just does the same thing. Please Help!! Thanks in advance.

    That is a kernel panic. They can be caused by software or hardware. If there are any devices connected to the computer, disconnect them and try again. If not, insert the install disk that came with the computer and start up from it.
    When the disk in is, click the Apple and select Restart. Once the screen is black, hold the C key until you see the spinning gear under the Apple logo.
    Hopefully, it will boot to the install disk. If you get another kernel panic during this process, the issue is hardware and you will need to have the computer serviced.
    If it boots, select English and go to the next screen. Stop there. Click Utilities from the top of the screen and open Disk Utility. Select the hard drive on the left and run Repair Disk. This will check for any disk errors.
    Post back your results.

  • Please HELP! Fixing My MacBook Pro after I accidentally dropped it

    Hi there, I dropped my MacBook pro earlier and I went online and read some discussions on how to fix it. So I checked my data utility, it says 'Verified' on SMART status, does this mean that my hard drive is okay and all my files are still there?
    Then I clicked on 'repair disk' under the First Aid bar, it says "Some information was unavailable during an internal look up", can someone please help me explaining what this means?
    Then I followed the Apple instructions page http://support.apple.com/kb/TS1440 to use Time Machine to back up my files as my has possible, but at the time I proceed to 'select a backup source', it shows nothing but just "Searching for time machine backups......" below on the screen. What does this mean?
    I really need my laptop to come alive, and I'm not that tech-savvy, I'd really appreciate your help! Thanks!!!!

    Can you open Disk Utility?  (Boot off of an install CD -- 10.6 or below, or the rescue partition -- 10.7 and above, and find Disk Utility on your menus)  If Disk Utility comes up and your disk is on the left side and it is greyed out, then things are not good for the disk, but just being able to run Disk Utility is a Good Thing because it means that your computer is probably ok.
    If the disk appears in disk utility, and it is black, click on it and run "repair disk"  (There are 2 buttons -- the verify disk won't fix any problems that it finds, so go straight to the repair) 
    If it runs with no errors, or finds errors and successfully repairs them, your data is safe.  In the case of a successful repair, always run verify again.  Sometimes it has to repair 2, 3, 4 or more times before it goes through and finds nothing wrong.
    If it stops during the repair and comes up with a message in red saying that the repair failed, then your disk is probably toast BUT -- the fact that your computer is running the Disk Utility indicates that your machine is still fine and can be brought to life with a new disk.  Sometimes you can get the data off of the old disk.
    How techie are you, and is your machine one that you can open up and replace the disk yourself?  If it is, then you need to look for instructions on how to replace the disk on your particular model of computer.  Or you can take it to a professional to do the swap.
    I know the feeling of watching the macbook pro hit the concrete floor -- AACCCKKK!!!  But in my case a new disk and a restore from Time Machine and I was back in business.

  • Grey screen on Macbook Pro boot up

    I've got a Macbook Pro 15" laptop (mid-2011) running Mac OS X Lion. It recently broke down and I can't get past the grey screen on bootup. It gets to the Apple logo and the circle loading animation then straight to grey screen.
    I've tried Safe Mode, zapped the PRAM, plugged everything out of it including the power cable, even tried to boot the recovery HD using the Option key. When I clicked Recovery HD, it went straight back to the grey screen. Nothing seems to work.
    I bought the computer the same week Lion came out so it had Snow Leopard on it and came with the Snow Leopard installation disc. I downloaded Lion from the App store for free. What would happen if I booted the computer from the Snow Leopard install disc? Would I lose anything that was previously on my computer like software I downloaded for Lion (Pages, Numbers, Keynote etc.)? Would I be able to get these back if I reinstall Lion after the boot and where would I get Lion from as I don't have the installation disc. Could I access my Apple account history on the App store and reinstall Lion from there somehow as I've seen Lion is no longer available on the App store?
    HELP!!

    What would happen if I booted the computer from the Snow Leopard install disc? Would I lose anything that was previously on my computer like software I downloaded for Lion (Pages, Numbers, Keynote etc.)?
    Booting the computer from the Snow Leopard install disc alone won't do anything.  Only if you were to attempt an installation from that disc might you run into trouble.  Kind of like trying to put a propeller on a jet airplane.  It just can't be done without removing the entire engine!  
    The 10.6 installer disc won't get you to the App Store.    For that you need to boot with command-R.
    If your data isn't backed up, you seriously need to consider some data recovery options before attempting even a command-R.   Once your data is backed up, contact the App Store support to get the Lion or Mountain Lion installer program to show up on your App Store, depending on where your software compatibility lies.
    In the future, it is always wise to keep a clone of your system in event something should go wrong.  That way you don't need the store to have the correct installer for your system.

  • Please help. im using a macbook pro versian 10.6.8 every website works on the laptop except for facebook for some reason anyone know why?

    its been a couple days now since my macbooks been playing up someone please help me. ive got firefox, google chrome etc none of them are loading facebook every other websites works fine, facebook takes 5 minutes to load and it goes to a mobile website without loading anyone know why? im using a macbook pro 2011 with ios 10.6.8

    Make sure your Java and Flash are up to date from http://www.java.com/ and http://www.adobe.com/
    Clear your cookies for Facebook as long as you remember the password for it.
    Try a different web browser * if none of the above work.

  • Please help! about retina macbook pro

    hi apple
    i was just wondering if retina macbook pro's track pad have tap. like, can you tap it with your finger in the middle to select somthing???
    or
    does the trackpad only have the click in the right and left corners?
    please help and thank you

    There is "tap to click." Go to your System Preferences - Trackpad - and select "Tap to Click." Look around in this folder to see what other trackpad gestures you could use.

  • 1 year old MacBook Pro wont let me do a software update. Please help :(, 1 year old MacBook Pro wont let me do a software update. Please help :(

    Hi everyone,
    I purchased my MacBokk Pro a little over a year ago brand new from an Apple store. As of a few month ago it refuses to do a software update. It says it cant connect because of a network problem, but when I run a network diagnostic it says there is no problem. Please help me

    No specific update. Just trying to check for software updates and it wont even let me check for one. I know there will be many updates to do because it hasnt let me check for updates in months

  • Please help!  2012 13" macbook pro with 250GB SSD, showing incorrect disk space reading

    I have a 2013 Macbook Pro.  Installed a new samsung evo 250 GB SSD.  Runs great, very fast.  However after looking through the available disk space and usage, there is a discrepancy between the available disk space and the amount of space being used throughout movies, pics, apps, backups, etc.  I have enclosed a screenshot, to give a better idea.  Any takers?  it shows that i have 1.16GB of music which i dont have.  It also shows 728.6MB of photos, which also i don't have.  I have no pics nor music on my macbook.  Lastly, it is showing that I have 114.11GB of apps on the macbook, which clearly is impossible for me to have!  It shows that i have over 227.49GB of free space out of 249.07.  Doesnt make sense at all!  If anyone has a solution in fixing this, please let me know, thanks!

    Try rebuilding Spotlight's index…
    Spotlight: How to re-index folders or volumes
    It will take time to re-scan the HD so be prepared for it to be busy for a few hours. Reboot & see if the system report is in better shape.

  • Please help. My charged MacBook Pro won't turn on.

    I've only had my MacBook for like a month. I charged it to 100% and now it won't turn on. Not even the button you push to see how much it's charged on the side will turn on. When I plug my charger in the light is super dim. Can someone please help? Its the 13 inch.

    Welcome to Apple Support Communities
    Reset the SMC > http://support.apple.com/kb/HT3964 If it doesn't work, the only thing you can do is to take the computer to an Apple Store or reseller because the Mac isn't working. That problem may be related to power or to an important part of your computer

  • Please help! using a macbook pro mid 2010 with 10.9.2 maverick and bootcamp 5.1.2 - I want to have Windows on my notebook. I have a Windows 8.1 AIO x64.ISO - just an iso, i dont have a Win DVD!

    Hi guys
    I tried the last two days everything from this forum. Run bootcamp, after restart (hold alt) go to the mac HD and delete or replace the bootcamp device (tried both options). had it almost done, at the end when it was installing/finnishing windows the error code "could not prepare the computer to boot into the next phase...... " and of course after that the "no bootable device insert boot disk and press any key boot camp".
    Please help me to fix this thing!
    Thanks a lot!
    hopelessdumb

    Please only use 1 thread https://discussions.apple.com/message/25160426#25160426

  • Please help me on my macbook pro : it keep crashing on AE

    last log message was: <140735286227712> <AppDirs> <5> Required Dir = /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/Required
    Generating crash log, which may take a few minutes.
    Process:               After Effects [3248] 
    Path:                  /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/MacOS/After Effects
    Identifier:            com.adobe.AfterEffects
    Version:               11.0 (11.0)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           After Effects [3248]
    User ID:               501
    Date/Time:             2015-04-25 01:14:03.871 -0500
    OS Version:            Mac OS X 10.10 (14A389)
    Report Version:        11
    Anonymous UUID:        45272F51-F15D-D2BF-412F-D86CA3766804
    Sleep/Wake UUID:       6B70B80D-1B10-4B22-BD24-C3196D12F569
    Time Awake Since Boot: 170000 seconds
    Time Since Wake:       1600 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGABRT)
    Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000010
    VM Regions Near 0x10:
    -->
        __TEXT                 0000000100000000-0000000100004000 [   16K] r-x/rwx SM=COW  /Applications/Adobe After Effects CS6/Adobe After Effects CS6.app/Contents/MacOS/After Effects
    Application Specific Information:
    abort() called
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib         0x00007fff8bd9b282 __pthread_kill + 10
    1   libsystem_c.dylib             0x00007fff99c85b73 abort + 129
    2   U.dylib                       0x0000000102b79152 U_LoadFrameworkBundle + 562
    3   libsystem_platform.dylib       0x00007fff8e947f1a _sigtramp + 26
    4   libc++abi.dylib               0x00007fff9a04d78a __cxxabiv1::__class_type_info::has_unambiguous_public_base(__cxxabiv1::__dynamic_cast_inf o*, void*, int) const + 62
    5   COR.dylib                     0x000000010167a4f6 COR_GetBIBAddressProc + 246
    6   COR.dylib                     0x000000010167ad1f COR_GetBIBAddressProc + 2335
    7   U.dylib                       0x0000000102b58866 U_ScSetAndRestoreUnhandledExceptionOrHardwareErrorHandler::U_ScSetAndRestoreUnhandledExce ptionOrHardwareErrorHandler(void (*)(void*), void*) + 54
    8   U.dylib                       0x0000000102b58c7a U_TranslateAndReportException(std::exception&) + 234
    9   FILE.dylib                     0x00000001016e469f FILE_Create + 351
    10  com.adobe.AfterEffectsLib.framework 0x00000001004355fb CEggApp::GetWorkspaceDirs(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> >&) + 495
    11  com.adobe.AfterEffectsLib.framework 0x000000010045352c CEggApp::BirthWorkspaceMgr() + 78
    12  com.adobe.AfterEffectsLib.framework 0x0000000100457096 CEggApp::IEggApp(bool, bool) + 692
    13  com.adobe.AfterEffectsLib.framework 0x000000010042d055 CEggApp::CEggApp(bool, bool, int) + 1005
    14  com.adobe.AfterEffectsLib.framework 0x000000010045bf35 SetAPETerminateFunc(boost::function<void ()> const&) + 709
    15  com.adobe.AfterEffectsLib.framework 0x000000010045c7ad EggMain(bool, bool, bool, bool, bool, bool, char*, bool, int) + 61
    16  com.adobe.AfterEffects         0x0000000100003aad main + 1677
    17  com.adobe.AfterEffects         0x000000010000340c start + 52
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib         0x00007fff8bd9c22e kevent64 + 10
    1   libdispatch.dylib             0x00007fff958ada6a _dispatch_mgr_thread + 52
    Thread 2:
    0   libsystem_kernel.dylib         0x00007fff8bd9b946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff95c784a1 start_wqthread + 13
    Thread 3:
    0   libsystem_kernel.dylib         0x00007fff8bd9b946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff95c784a1 start_wqthread + 13
    Thread 4:
    0   libsystem_kernel.dylib         0x00007fff8bd9b946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff95c784a1 start_wqthread + 13
    Thread 5:
    0   libsystem_kernel.dylib         0x00007fff8bd9b946 __workq_kernreturn + 10
    1   libsystem_pthread.dylib       0x00007fff95c784a1 start_wqthread + 13
    Thread 6:
    0   libsystem_kernel.dylib         0x00007fff8bd9b132 __psynch_cvwait + 10
    1   com.apple.CoreServices.CarbonCore 0x00007fff968cb7e0 TSWaitOnCondition + 108
    2   com.apple.CoreServices.CarbonCore 0x00007fff968cb9df TSWaitOnConditionTimedRelative + 171
    3   com.apple.CoreServices.CarbonCore 0x00007fff9689b31d MPWaitOnQueue + 192
    4   com.adobe.dvacore.framework   0x0000000102f45ce4 dvacore::threads::ThreadSafeDelayQueue::PopWithTimeout(std::auto_ptr<dvacore::threads::Al locatedFunctionT<boost::function<void ()> > >&, int) + 200
    5   com.adobe.dvacore.framework   0x0000000102f42fe3 dvacore::threads::(anonymous namespace)::ThreadedWorkQueue::WorkerMain(boost::shared_ptr<dvacore::threads::ThreadSafeD elayQueue> const&, boost::shared_ptr<dvacore::threads::Gate> const&) + 115
    6   com.adobe.dvacore.framework   0x0000000102f406d3 dvacore::threads::(anonymous namespace)::LaunchThread(std::string const&, boost::function0<void> const&, dvacore::threads::ThreadPriority, boost::function<void ()> const&, boost::function<void ()> const&) + 163
    7   com.adobe.boost_threads.framework 0x0000000109197ace thread_proxy + 158
    8   libsystem_pthread.dylib       0x00007fff95c7a2fc _pthread_body + 131
    9   libsystem_pthread.dylib       0x00007fff95c7a279 _pthread_start + 176
    10  libsystem_pthread.dylib       0x00007fff95c784b1 thread_start + 13
    Model: MacBookPro11,1, BootROM MBP111.0138.B11, 2 processors, Intel Core i7, 3 GHz, 16 GB, SMC 2.16f68
    Graphics: Intel Iris, Intel Iris, Built-In
    Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
    Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.15.124.12.8)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 27 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en0
    Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
    USB Device: Internal Memory Card Reader
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2
    Model Name: MacBook Pro
      Model Identifier: MacBookPro11,1
      Processor Name: Intel Core i7
      Processor Speed: 3 GHz
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache (per Core): 256 KB
      L3 Cache: 4 MB
      Memory: 16 GB

    jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
    Most of the projectors I have used support a 1024X768 res.
    Youcan also try a pram reset if it still does not detect.
    Leave theproctor connected and powered up, power down the MBP.
    Power back up the MBP and hold the following keys before you hear the start up chime:
    Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

  • Please HELP: My 2.4 MacBook Pro doesn't starup!!!!

    I was using my MB Pro (1 year and 2 months old) and it started to pinwheel indefinitely and after a forced restart the usual chime went off but the screen stays gray. This happens every time I try and start it up.
    I tried zapping the PRAM, resetting the power management, and even tried using a startup disk like Diskwarrior and the Apple Restore disk that comes in the box. Holding down the C key to activate these startup disks does nothing.
    I tried holding down the option key with the hopes it'll allow me to pick a startup disk... the cursor eventually shows itself but nothing else happens.
    I do not know what else I can do.
    Any thoughts? comments? etc?

    Unfortunately, when your Mac won't boot even from a disc, it is very difficult to troubleshoot. That it has a start up chime is good in that it means some things are working. Do you get any beeps or flashing lights that would indicate a RAM problem? And have you tried to boot it from an external firewire drive?
    Do you have access to an Apple Store? If so, you might want to make an appointment with the genius bar to have your Mac evaluated. They have a few more tools to work with than the average user does. I'm guessing that you have a logic board problem of some sort, but it's hard to say when none of the usual troubleshooting steps can be tried.
    Good luck!

  • Please help: Transferring contacts from Macbook Pro to Nokia 5530

    Hello,
    I used iSync to transfer my contacts from my Nokia to OS X. However, I am not able to do the other way around!! I want to transfer contacts from my macbook to my phone, what am I missing?
    Thanks

    I have 5230 Nuron, what Nokia do you have?
    Did you install the iSync plugin for your Nokia model? They can be downloaded from Nokia's European site
    My plugin in iSync allows me to either merge data on both or erase Nuron and overwrite it with data from my Mac. Calendars and Contacts

  • Power On, Apple Logo, Grey Screen (2005 macbook pro)

    Ah what's wrong with it
    When I turn on my laptop, the normal apple logo and loading spinner pop up, and when they go away, I'm just left with a grey background. Whas going on

    Gooseberrysoda wrote:
    However, now that it's booted up, Airport can't turn on,
    Some things may be disabled in Safe Mode:
    http://docs.info.apple.com/article.html?artnum=107393
    Also, my cursor has 15 horizontal lines on it... I have no idea what that means. They extend from the cursor itself and continue down in a line, about 4x15 pixels each.
    Sounds a lot like a GPU issue. Run Apple Hardware Test to see what it shows.

  • Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop.

    Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop

    screen look on

Maybe you are looking for

  • Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

    Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

  • 200G 4200 rpm vs 160G 5400 rpm?

    I'm considering a 200G drive for the extra capacity -- it seems like you can never have a drive that's too big. I'd love to be able to partition it for different development/OS environments. But can you get a drive that's too slow? Would I notice the

  • Can I make the leap to Lion from v10.5.8?

    I would like to leap to OS X Lion, and have two Macs at OS X v10.5.8.  1.  Do I have to purchase OS X 10.6 Snow Leopard, and then purchase OS X 10.7 Lion? 2.  Do I have to do this twice?  i.e. separately for each Mac?

  • MDX execn error: "Dimension Signature mismatch"

    Hi All, I'm trying to run an MDX script against Essbase, and I get the below message: "Dimension Signature mismatch in function [SET CONSTRUCTOR]" Unexpected Essbase error 1260054. The MDX query is as below, the error occurs in line 5: select {[CurFc

  • Problem with monitor driver

    Hello,congratulations for the forum ,its a great idea!!! I have a problem with my lenovo T61. I have tried to to install this: http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-62923 But i can not!!! I am going with the instruction