Please help have error code 1013 and can not restore iphone 3gs

i have tried every thing i can find to restore 3gs and no luck
tried 4 different computers and 3 cables and all the usb ports on the computers
i have even tried the gs.apple.com fix and no go.. am at a loss on what to do next any help
would be great thank you all

Every time I restore I get a different code last 2 times I have gotten code 1002
And 1013 a few times.
Error 1002 usually means a hardware problem. If you've tried several known working cables, the problem is likely in thte phone itself.
+"Error 23, 28, 29, 40, 1002, 1011, 1012, 1014, 1611: These errors may indicate a hardware issue with your device. Follow the steps in this article and also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. If the MAC address is missing or the IMEI is the default value (00 499901 064000 0), this can also confirm a hardware issue."+

Similar Messages

  • HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

    Well I spoke too soon.
    The update was successful, but now I cannot connect to the 3GS data network.
    Cannot get email and cannot open a page in Safari.
    +"Safari could not open the page because the server stopped responding."+
    +"Cannot Get Mail+
    +THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
    Email and internet work fine on WiFi.........no data using 3GS network.
    Looks like I will have to revert back to old OS.

  • Phone stuck in recovery mode error code 40 and would not restore

    My Iphone 3GS stuck in recovery mode error code 40 and would not restore.I was with AT & T.Please help!

    Hi there...
    Actually I was stuck with this situation yesterday. Here is what I did to overcome this issue: I hope it helps.
    To start with, here are few things to you should make sure of:
    1- You have the latest version of iTunes. You may try to uninstall and reinstall iTunes.
    2-Restart your Windows.
    If still no luck, try editing the Hosts file, here is how;
    1- click on RUN then copy and paste the following:
    notepad c:\windows\system32\drivers\etc\hosts 
    2- look for gs.apple.com
    3- if there are numbers infront of it just delete them or just type # before the numbers.
    4- Save the file and try restoring again.
    Note: you should have administror access to edit the Hostes file.
             put your iphone in DFU mode before restoring.
    I hope this helps. It did for me

  • Can not restore my iPhone 4 with error code 1611 and can not activate it to work too.

    My iPhone 4 can not be activated and when I tried to restore it with itune there is error code 1611 about hardware issue.If anyone ever had the same problem please help.

    Have you googled to see what the error code means?  Perhaps that will give you a clue as to how to solve your problem.

  • Unknown error has occured and can not restore

    trying to restore my ipod but keep getting an unknown error and can not restore

    In most cases, an error number accompanies the "unknown error".  Was there an error number?  If so go here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    If no error number try:
    iPhone and iPod touch: Unable to update or restore

  • When doing a restore on my ipad it says a error has occored and can not restore

    Please help.  I have been banging my head for a few hours. 

    To offer assistance... the Error message you are receiving is needed.

  • Lost "Encrypt iPhone Backup PW and can not Restore iPhone from iTunes?

    Late LATE night attempt to Reset iPhone via USB connection to iTunes ened up insread with me Erasing All Content and Settings from iPhone directly after encrypted back up of phone to Macbook then attempting Restore from Macbook to iPhone. Lost most of my iPhone contacts and still cannot remember or find copy of pw for encrypted backup UNLESS that is because my Macbook is now encrypted with FileVault. I put a copy of the password for encrypting iPhone Backup in my 1password app and am positive it is good is only being rejected because Macbook in now encrypted. All I want is my iPhone contacts. So I am de-encrypting my Macbook now. Kind of in a pickle when you loose the only copy of you resonal contacts. Can anyone help sort this mess out? My level of computer competence is really lacking.
    If they would just stop spying so much these things (encryptions, FileVault etc)  would not be nessaccary.

    The syncing is happening through the cell network not the wifi so it didn't help to turn off the router.  Here's what I ended up doing that finally worked:
    I restored the backup.  Before I could use the phone, it takes me through a few steps.  On the icloud step, I actually skipped it, so I didn't enter my password.  At that point the phone was usable again so I went to settings>icloud and turned off Contacts.  I double checked and my contacts were still on my phone.  THen I went to settings>icloud and entered my password and the turned contacts back on.  At that point it asked me if I wanted the contacts merged and I said yes.  A few minutes later my contacts were still on my phone and I checked my icloud account online and the contacts had been syced there as well.  Finally!  It worked!

  • Keep getting error code 1 and will not download

    keep getting error code 1 and can not dowload adobe cc

    Here's some advice from adobe
    Error: "Failed to install" | Creative Cloud Desktop

  • Getting error code 2300 when trying to restore iphone

    I keep getting error code 2300 and can't restore my iphone. Any suggestions?

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

  • I have iphone 5s and i have error code 1009, what can i do?

    I have iphone 5s and i have error code 1009, what can i do?

    Make sure it's charged using a will charger.  If it still won't turn on try resetting it (hold on/off and home buttons simultaneously for 10-15 seconds until you see the Apple logo, release and wait for it to restart).

  • HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

    No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
    The Home and Sleep buttom does only promt the Connect to itunes...
    Have closed down anti V and is admin and so on.....
    Regards Martin

    Hello mftoby,
    Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
    This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    iTunes: Troubleshooting security software issues
    http://support.apple.com/kb/TS3125
    Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
    Thanks,
    Matt M.

  • Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty

    Have file in Trash and can not empty trash . Showing 63 files and tried to shut down and restart and still will not empty.Anyone know what can be done?

    You are welcome. Glad I could help/
    Allan

  • Please help me in my secret answers can not remember what to do?

    Please help me in my secret answers can not remember what to do?

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (119026)

  • Service 'Apple Mobile Device' failed to start. Verify that you have sufficient services. i have followed all fixes and can not resolve this problem?

    I can not get apple mobile device to activate. When reinstalling itunes it still comes up with, Service 'Apple Mobile Device' failed to start. Verify that you have sufficient services. I have followed all fixes and can not resolve this problem?

    Thanks to the suggestion of Doehunter the problem has been resolved

  • We have got a balance of 18 pence from the UK and we have moved to Australia and can not load a ozzie iTunes card on. what can we do? we do not want the 18 pence so you can cancel it.

    we have got a balance of 18 pence from the UK and we have moved to Australia and can not load a ozzie iTunes card on. what can we do? we do not want the 18 pence so you can cancel it.

    Click here and request assistance.
    (65586)

Maybe you are looking for

  • Problem converting XML back to ABAP Structure using XSLT

    Hi Experts, I am currently trying to convert this xml file back to my ABAP structure but i have been unsuccessful so far. In XML file contain more than 1 reocrd. But my XSLT program is retriving only only first record. Try to help to get all the reco

  • How do I design this in data warehouse?

    I am working on building a data warehouse for insurance quote data. Each quote will have an applicant and can have an optional co-applicant. Each applicant and co-applicant will have prior auto insurance history, prior home insurance history, current

  • Help sending multiline interface commands

    Hello, I have an instrument that is controlled by its own software on a PC that it is connected to with GPIB and RS232. I would like to write a labview program that emulates what the software does. I ran the GPIB analyzer during the initialization of

  • NT 의 OCOPY 를 이용한 HOT BACKUP SCRIPT

    제품 : ORACLE SERVER 작성날짜 : 2002-04-25 NT 의 OCOPY 를 이용한 HOT BACKUP SCRIPT ======================================== PURPOSE 다음은 NT에서 OCOPY를 이용하여 HOT BACKUP을 하는 SCRIPT를 제공한다. Examples 1) <Batch file 1 > Online_backup_data 라는 batch file 은 다음처럼 이루어질 수 있다.

  • Avahi selective publishing

    Sorry for my poor english but in my language forum I not have response... My server have two interfaces (eth0, bond0), i want avahi publishing netatalk in eth0 and samba with interface bond0... at default avahi publish all service in all interfaces!