Please Help: I accedently deleted the Safari on the Mac OS -

How can I install the Safari because I can't open Safari using the MAC OS. I am actually running the virtual machine now, using XP Windows to send this message out? Please HELP!!!!

Hi
Welcome to Apple Discussions
A reinstall of Safari Leopard is quite simple.
First, insert the Leopard Installer DVD. Double Click on the "Optional Installs". Then double click on the Optional Installs.mpkg file. Once open, the Installer will lead you through a few steps. After selecting your HD, the next panel is where you'll find Safari (in the Applications folder. Check the box, then continue.
After Safari is installed, go to your Applications>Utilities folder. There, open Disk Utility. When open, select your HD on the left, then "repair permissions".
This installs Safari 3.0.4 on your system. Once installed, you can download the latest version of Safari from here.
Message was edited by: Hawaiian_Starman

Similar Messages

Please help!-I deleted the master file

Ok. for the first time I accidentally deleted a sitting from the original file folder. It's not anywhere, not trash, I searched the entire computer, etc.
Is there a way to restore it thru lightroom? I still have the lightroom files but of course they say the filename "IMG_0558" is offline or missing.
Please help. I can't call this client with this huge mistake.

Yes, that is what I normally do. However, this week I lost contact with one entire side of my family due to mental illness (not mine), and then my grandmother passed away as well. Her funeral was just yesterday. This doesn't excuse my failure to back up again but I was no mind to be handeling files and I should not have been. I should have gone to bed instead. I am a responsible photographer, this has never happened in 13 years. I've just had the worst week of that 13 years almost.
It's my own fault, and a mistake that I made. I just need help in trying to fix it if possible.
I'm trying the restoration programs now.

Please help me to delete the existing user

No camera

If it's a first gen iPad then it doesn't have a camera, and therefore no built-in Camera app.

HT201272 Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

Im unable to find deteted apps in purchased section in App Store ..please help me in restoring the deleted app

Is the app still in your country's store (if it isn't then you won't be able to redownload it), you haven't changed countries since buying it (content is tied to the country as well as the account), and it isn't hidden : http://support.apple.com/kb/HT4919 ?
If the app is no longer in your country's store then do you have a copy of it on your computer's iTunes library and/or on your backup of your downloads/library ?

Please help me to delete all the contacts in my i phone 4s..its tiring to delete one by one...

please help me to delete all the contacts in my i phone 4s..its tiring to delete one by one

Stop making illogical statements and posting multiple times.
READ the article from which this silly statement was posted and follow the detailed (and explicit) instructions.

HT204053 Please help me to delete my friend account get the Magicjack on my iphone . Now i want get it for use this program myself. How to do now?

Please help me to delete my friend account :, getting in the Magicjack on my iphone last year. Now he go away and the date on Magicjack is expiried. I need delete it for create my own account: on Magicjack. But I don"t know his password. How to do now? Please help me.
Best regards.
<Email Edited by Host>

Welcome to the Apple community Dieumai.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

HT203167 I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't rep

I bought the app peru tv in march. Sometimes it stays idle when downloading a tv channel so I ended up deleting the app and reinstalling it. Today I can't even find the app in the store. Please help. I contacted the camadu app support but they haven't replied regarding problems with channels and lost app

In order to properly upgrade the OS of your Mac. 10.1 Puma is really old. Your Mac has to meet the tech specs for Lion: And it would probably need to be a clean install. If you recently purchased Lion. Call Apple Care CPU and ask them to be sure. You get 90 days Free of phone support. 1-800-275-2273
Apple - OS X Lion - Technical specifications
General requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.

I am not sure that I deleted Iphoto, but Iphoto desapeared. I don't have original disc. Can you, please help me , to find it somewhere on my mac?

I am not sure that I deleted Iphoto, but Iphoto desapeared. I don't have original disc. Can you, please help me , to find it somewhere on my mac?

The iPhoto application should be in your applications folder
If you have removed it and your computer came with restore disks then you will need them to reinstall. Or you can purchase a version on DVD or from the App Store. Apple my be able to reace missing restore disks for a nominal charge
LN

TS1424 Hy. Please help me. what's the problem? when i accessing icloud or find my friend app: The maximum number of free accounts have been activated on this iPhone.

Hy. please help me. what's the problem? when i accessing icloud or find my friend:The maximum number of free accounts have been activated on this iPhone.

Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

Please help me to solve the issue in my query.

Hi All,
Please help me to understand the mistake what i did in below query and help to resolve that.
Actually i am trying to create a query to filter the records from db based on my input parameter.
If my input parameter is 1(@showallrecords) then i need to show all the records which has the IsLatest as 1
If my input parameter is 0(@showallrecords) then i need to show all the records which has the IsLatest as 0
select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
and (@showallrecords = 1 and tabel1.IsLatest = 1 )
and (@showallrecords = 0 and tabel1.IsLatest = 0 )
when i am executing the above query with the parameter @showallrecords = 1 ,db is returning 0 rows.If i am executing the above query after removed the last line and (@showallrecords = 0 and tabel1.IsLatest = 0 ) then records are coming.
i understand that 1=0(last line) and the condition is not true.So its affecting the result.
Please help me to solve this.

select * from tabel1 INNER JOIN tabel2
ON tabel1.KeyId = tabel2.KeyId
WHERE (tabel1.IsLatest = @showallrecords Or @showallrecords=0)

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

Good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

HT1918 I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

I would like to change my Visa card from the account but its not changing and the billing information is not changing and I can't purchase any thing from my account its now not usable please help me to solve the problem

You made a purchase and exhausted the credit on your card before it processed. All purchases are final. Contact iTunes Store support. You need to settle up before you can purchase or download anything else.

Need driver for canon mg 5250 as scanner is not working with version 10.7. Can you please help me to find the driver so scanner works with WIFI?

need driver for canon mg 5250 as scanner is not working with version 10.7. Lion. Can you please help me to find the driver so scanner works with WIFI?

Try with the latest Apple driver package for Canon (released 15th Feb):
http://support.apple.com/kb/DL899
This solved my problem with the printing.

Please Help: I accedently deleted the Safari on the Mac OS -

Similar Messages

Maybe you are looking for