Please help i am going off my mind when i connect my iphone 4 to my mac it tells me it can not be used because it requires 10.6.3 or later my mac is operating on 10.6.8 and my itunes is 10 .5 yet the iphone does not even show up in devices please help
please help i am going off my mind since i updated my iphone 4 when i go to sync it tells me it can not be used as it requires 10.6.3 or higher
my mac is running on 10.6.8 and i upgraded my itunes to 10.5 everything seems to be in place but the phone is not even being recognised in
devices although it does come up in iphoto if anybody can help i would be very grateful.
You have answered your own question:
"requires 10.6.3 or higher"
" i upgraded my itunes to 10.5 "
You need itunes 10.6.3 or later.
Similar Messages
-
problem in adding files to iTune library as mentioes in subject
Try transferring/copy to 3rd party apps like OPlayer.
-
Toshiba C55-A5105 .Showing : No bootable device.Please restart system
I Remove Windows 8 Comming With My Laptop Toshiba C55-a5105 For Install Windows 7. When i start the computer this message is showing : No bootable device -- Please restart system
Help me pleaseINSTRUCTIONS:
First - Burn recovery media before you make any changes! -you may want or need to go back to windows 8 later-
Second -
Important Bios changes when changing from Windows 8 to Windows 7:
Completely shut down laptop (Shut down Windows 8 while pressing the Shift key to completely power off.) then restart computer and hold f2 when the screen goes black and wait for the bios setup utility to launch.
Select advanced, then system configuration, then boot mode
UEFI and CSM or legacy (UEFI for Windows 8 and CSM or legacy for windows 7)
For windows 7 change to CSM or Legacy mode.
Third - Also in bios setup utility select - Security, then Secure Boot, then you have to disable secure boot for windows 7.
You will need to delete all partitions before installing windows 7 this is done forth step.
Forth - Insert your windows 7 disc and select custom install, your partitions should show up - click on each one and below you will see advanced drive options, click that and you will have options to format - format each one, then delete each one. You will be left with one raw partition, select to install and windows will do the rest while installing the operating system.
Fifth - install drivers
Installation order is important:
Install chipset driver then video driver before other drivers. Then install Toshiba Value added package before other applications
Post your results!
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!**** -
I was running KeyPassFox with Firefox 8.0.1, but the plugin does not work in the new release (9) . Is there a way to restore my previous version with all of my bookmarks intact? I do not mind if I have to restore the plugins myself.
The plugin shows on the list as enabled and functioning, yet the tool does not show on the toolbar. It would appear that I need to restore the previous version of Firefox and wait until a newer release of the plugin is available before upgrading the browser.I copied the iTunes file from the external drive and it's in both places. I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file. There must be something else that's missing. My iTunes library looks the same on the new computer as it does when I open it on the external drive. If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
My back-up drive is a mess. I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={ Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period. I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive. Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me). As my Jewish friends would say, "Oy Vey!" -
I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.
If you can run it under chrome, you have java installed.
There was some malware that exploited an older version of Java (not javascript) running in a Browser. Since few people use it Apple turned off Java by default in the Safari Browser.
If you need it for something, just turn it back on in Safari preferences (inside Safari). After a few months of non-use, you may find it has turned itself off again. -
windows thinks my itouch is a camera and itunes says this ipod can't be used because the software isn't installed - reinstall itunes. i've done that and continue to get the same error. can someone please help?
(apologies for barging in, lllass.)
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now? -
I updated my iPad 4 iOS 8.0.2 and the camera does not work, ... Please help
I updated my iPad 4 iOS 8.0.2 and the camera does not work and hangs and unconnected, .... Please help me in this question,... Thanks in advance
You're welcome, but I didn't do anything. Try closing the camera app completely and reset your iPad and maybe that will help.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?
Sounds a bit like the Power Supply, but...
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349
How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939 -
I am trying to download and install itunes on windows 7. The download works fine and it appears that the install works fine as well but when it finishes itunes is nowhere to be found. I am in Mexico. Please help. Thanks
You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
Syncronizing my 3gs with itunes the sync does not finish because itunes always crash and stuck and i can not sync my device, i dont no whats wrong because the itunes even can not acess itunes store, still loading waiting for itunes store and nothing.I tryed reinstall itunes but just waste of time.
My itunes is update, iphone 3gs 4.3.4, system is windows vista home premium.
Please help me.I also have the Mcaffe security centre so on the face of it we have very similar situations and I had not problems.
You asked what I meant about saving the installer on your PC.
When you go to the iTunes download page:
http://www.apple.com/itunes/download/
And click on download, you should be offered the choice of running the installer or saving it. You need to click on save and then choose a folder on you PC where you want it saved. But I think you already did that.
After the installer file - iTunessetup.exe - is save on your computer, you double click on it to run it.
It's very odd that the installer fails at different stages. usually when the installation fails, it is at a specific stage and usually generates an error message.
I am afraid I am mystified. Have you had any other problems with your PC which might suggest a general problem not specific to iTunes?
The only other suggestion I have is to download a fresh copy of the installer - in case it got corrupted. You could also try using "run as administrator" to run the installer. It should be an option if you right click on the installer file.
The other thing it might be worth trying is to install it from another account, but you would need to create another administrator account if you don't a;ready have one. Or if you have another account that is not an admin account, you can temporarily promote it from the control panel>>User accounts. -
i-tunes could not be used because the original file could not be found.could not locate.this error occurs on most of my songs in my library and will not play even though they are in my i-pod and play with no trouble.can anyone please help?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
Hi, I was working in WORD on a file containing huge data. My machine just hung up one day while working and now I seem to have lost the file how do I get it back. Please HELP me.
Well, iCloud has nothing to do with this.
Do you have the built-in backup function Time Machine running on your Mac?
See: http://support.apple.com/kb/ht1427 -
Every time I try to open Photoshop Elements 12, it opens the Adobe login, after I login the program does not open:( Help please?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
Maybe you are looking for
-
How to keep superscript in header text xref? It is OK in TOC.
I am updating this generated book:http://www.crystalfontz.com/products/533/datasheets/1704/CFA533-YYH-KC_v1.0.pdf using FM 9, unstructured. As you can see on the title page, the product name has a superscript "2" in it. Unlike this post http://forums
-
How can I use Find my iPhone on supervised devices?
I manage a fleet of iPad 2 carts for my school all using the same Apple ID, but I have run into a wall with this problem. In the past Find my iPhone has not be able to for me on supervised devices. I have thought about using Meraki, but I have read t
-
How do i give earthing to my macbook pro?!
The wall socket has earthing, the Spike Guard has earthing, and the extension cord that came along with the Macbook is 'supposed' to have earthing. However, where there should be a pin for earthing, there is just an empty hole with some kind of a con
-
Export and Import encrypted data
Hi, I have a database table with encryped data (encrypted using DBMS_OBFUSCATION_TOOLKIT.DES3Encrypt). I am having an issue when I export this table and import it into a new schema. The encrypted data seems to have changed after import. I am unable t
-
Problem in testing through sol manager
Hi guys, We are facing a problem in assigning a test package to users. We have done the following in solution manager 1) Created Project 2) Selected the business scenarios 3) Generated the blueprint 4) Done the configuration 5) Created the Test cas