Please help, I am having a nightmare with upgrading iphone 4
Hello everyone,
My dad asked me to upadte his iphone for him and I just can't get it to work now.
I backed the iphone 4 up on itunes and then ran the update, initially when it had finished it wouldn't allow me to access my wifi so I looked that up and re-enetered the details and that is now working but it keeps asking me to either restore or set up as a new phone, I have restored from itunes while the sync is going through it stayes on a connected to itunes page and then just says connect to itunes so it looks like the restore doesn't work. Itunes seems to be going through the motions on the top bar but I just can't get off these white set up screens. What seems odd is that I disconnected the iphone and then reconnected it and it took me to iphoto and imported photos from the phone so there must be data on it. Can anyone point me in the right direction please?
Where did you get the phone? Sounds like it may have been hacked to unlock it. If it was originally carrier locked, ONLY the original carrier can authorize unlocking it. FYI: The Gevey SIM is illegal in every country on the planet.
Hacked and jailbroken devices can NOT be discussed here per the terms of service.
Similar Messages
-
Help - I'm having a nightmare with BT
I have spent so many hours on the phone to BT over the last 3 weeks it is unbelievable.
I called originally on the 25th Feb to change some things on my account ( I wanted to resign my broadband, cancel off the 4.99 security that I had never used and cancel one of the two lines I have coming into the property and renumber the remaining line to the one that I wanted cancelled).
Someone ( I have his name) said he would do this for me and then call me back the next day to get the line requests sorted out (as I had to get off the phone as a customer had came in). The next day came and there was no call. I then received a letter that the line I wanted cancelled had been resigned for 5 years! So I called up and tried to speak to the guy from Skelmersdale again, couldnt get to him so someone took the details of my call and created an issue with ref No IMP1182842. The guy called me back 2 days later and we went over the call, he remembered speaking to me and apologised for getting it wrong then said he would get the 5 years taken off and put through the request I asked for with the lines. He said it would take 48 hours or so but he would email me when it had been done. No email came
I kept checking the line and after 4 days I realised that nothing had been done. So I call again, can't get to him again, someone takes my details, tells me they can see he is in office and online so they will send him a message. Eventually they say he has responded and he will call me that day. The rep on the phone said he would send me a 2 way text and if the guy from Skelmersdale didnt call back I had to reply to the text and he would chase. No 2 way text arrived so I couldnt get back to him.
Then I call again, go through the same tedious explanations to a completely new person, Again he sends a message to the guy at Skelmersdale who then calls me that day. I explained that he still hadn't done what he said he would do as both lines were still active and he said that he would physically go up to the team that would do this request and he would make sure it was done within 24 hours this time and he would call me back before the day is out to confirm that it had been done. I received no call back and the line requests werent actioned.
So I need to call again, speak to someone new, he sends a messgae to this guy and his manager, they guiy said his manager is now dealing with this and that he would be in touch before 1500 that day. This person also says they will send a 2 way text. This text arrives this time. Unsurprisingly, I do not get a call by 1500 so I send a text saying so. I don't get any reply but this was 1500 on Friday just gone so I thought I would give it till Monday as it says 2 hours on the text. on Monday at 1000 I text back again saying I still havent received anything from the manager at Skelmersdale. I have still not had a call back from this 2 way text.
So I need to call again, through the same process with another new person, they tell me they will take ownership and send a message to the manager asking why he hasn't responded to me. She said she was going to be off on Tuesday but she would call me 1st thing on Wednesday morning to check if he had called. She also said she would send a 2 way text. I told her that this process hadn't worked before but she said there's no reason why it wouldnt work as they use this system all the time and she would call me back regardless on Wednesday anyway (today). I never received the 2 way text from her.
It is now 1116 and I just can't bring myself to speak to anyone in your company again. The incompetence is staggering. The level of customer care is atrocious and nobody take ownership of problems, they are always passed off elsewhere. I am hoping one of the mods on this site can help because I can't face going through this whole debacle with someone new again.
I am a small business owner and I shouldnt have to go through all this for a relatively simple request
Solved!
Go to Solution.Welcome to the BT Residential Customers forum
As you are a business user, please could you post on the BT Business forum at http://business.forums.bt.com/
One of the BT employees on that forum should be able to sort things out for you.
The mods on this forum can only deal with residential problems.
Thanks
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Hello , please am having a problem with my iphone 5 , the battery runs out quickly ,another problem also if i turn on 3G it will run faster , 15 minutes and the iphone battery will be out . My final problem is that "no service " appears a lot especially when opening wifi or 3G , can you help ?
Your battery is running quickly because your cellular data connection is weak.
Is your phone carrier a supported carrier: Wireless carrier support and features for iPhone in the United States and Canada - Apple Support
For your no service issues: If you see No Service in the status bar of your iPhone or iPad - Apple Support -
Hello' I am having an issue with my iPhone 5 display. 2 days before i've noticed some horizontal and vertical lines on the display. Minor but noticeable. Specially in dark wallpapers and on full brightness. Is it normal?? Is this a software bug or Hardware problem?? Please Help!!!
Hello,
No, it is not normal. Follow this article:
http://support.apple.com/kb/ht1414
If this doesnt solve the issue your iPhone will need service.
Burcu -
Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS
Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies! -
Please help to get onhand stock report with last purchase and billed date warehouse and item wise
please help to get onhand stock report with last purchase and billed date warehouse and item wise
Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy -
Please help me creating a new listener with different port#.
I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done. -
Please help me in resolving the URL with parameters.
Hello,
Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
if desformat is html or xml, the following URL is working.
our requirement, report should be in pdf format.
http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
Thanks in advance,
UshaWe've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
-- jim -
Please anyone who can help me in unlocking or openlin with my iphone 4
please anyone who can help me in unlocking or openlin with my iphone 4 its been months but i never get use it...version 5.1.1
<Edited by Host>Only the carrier to which your phone is locked to can unlock it provided that the carrier offers this service. Contact your carrier for unlocking.
-
yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.
See this support doc on how to use FT... http://support.apple.com/kb/HT4319
-
i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.
Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.
-
i am having problem when i am updating my iphone 4 to ios 5 ..it get update n took 50 minutes then at the end when it was processing file ...suddenly an error comes that an unknown error accurred {9006}..please help me..how will i update my iphone 4
Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.
-
Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
i want to replace my front screen of 4S. Please help me to identify original screen with fakes?
Apple does not sell parts.
Either get the entire device replaced under Out of Warranty exchange or take your chances with non-oem parts. -
I'm having a trouble with my iPhone iMessage.
I'm having a trouble with my iPhone iMessage.
I cannot send any pictures through iMessage only to my friend who's using iPhone4s.
iMessage without a picture goes well.
When I used iPhone5, everything worked fine.
But after I change my phone from 5 to iPhone5s, it's not working well.
please help me.
(sending pictures to friends using iPhone5&5s is working fine. It just not works with that friend(who is using 4s) only.)Try this on the iPhone 5s go into settings turn iMessage off wait about 60 secs then turn it back on...under iMessage you will see it say waiting for activation...when it changes it will give a message that says iMessage can be sent blah blah blah...after you see that you will see an option that says send and receive ...click that...it should bring you yo a page that say you can be reached by iMessage at you should see you phone number with a check mark..it will be light grey...don't worry about signing into you Apple ID... You only need to do that if you are connecting you iPhone to another device (Mac, iPad, iPod touch) to receive the same iMessages on both...after that go back to the first message settings page again and at the bottom you will see mms messaging turn that off then back on....after that's done..tap you home key and send a test message
If it still doesn't work follow this http://support.apple.com/kb/ts2755
Maybe you are looking for
-
Weird problem with A300 and external drive
Info about my comp: A300-29U model Windows 7 ATI Edition (32) SATA Unknown External Drive ----- Ok, so yesterday I plugged in my external drive as usual to check some music. Everything was ok and I went to sleep. This morning when I woke up and tried
-
Music Sync in iTunes is Non-Op
When I try to sync my music in iTunes, the selection "all songs and playlist" is not clickable. What has to be done to correct this? Thanks-Dan
-
Issues connecting multiple machines wirelessly to WRT54G router
I have a WRT54G router and have one wired desktop, two laptops that connect fine and then I have a netbook and another desktop with wireless adapter I am having issues with connecting. I used the wizard and set each machine up with the downloaded ex
-
What is the use of confirmation tab in Purchase order ?
what is the use of confirmation tab in Purchase order?
-
Como actualizo os x leopard a show leopard
Hola! como actualizo os x leopard a show leopard descargandolo desde apple Gracias