Please help, i am losing my mind with the highlighting on my project

when i view my project in iDVD, it looks fine, but when i burn a copy and try to watch it on my tv, the highlighting for the buttons isn't working properly. the highlighted text does not line up with the button and you can see 2 overlapping words in 2 different colors. this happens regardless if i use the T for text or the button for any particular theme. when the button is highlighted, the cursor/highlighted word looks like a mess...

Hello, I had similar problem when some of my chapters cant be clicked on, my problem was the way I was spacing the chapters on a page, sometimes when they are close to each other, it would not be able to highlight at all. Maybe they way you spaced your chapters. I dont know if that will help at all, but it just my thought.

Similar Messages

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

Please help me! I am struggling with the mesh tool!

So I want to make this chair look like it does in the picture, but I cant! There is a chapter in my Illustrator CS3 book explaining how to use gradient mesh and mesh tool, but it doesnt help me at all. I am clueless! The tutorial says that I can create points in the mesh simply by clicking with the mesh tool within an object, but when I try to do that, the pointer is "crossed out". I can only add extra points on lines or edges, but not on empty space within an object. What gives? Why is it that others can do it an I cant? Forgive me if I sound a little too upset, but I've been struggling with this for days and I cannot find an answer.
In this tutorial right here: http://www.layersmagazine.com/illustrator-gradient-mesh-tool.html the guy just clicks in empty spaces creating intersections. In my case it is impossible.
PS: Please look at an attached file and tell me what would be the best way to go about coloring this chair. Maybe I am doing this completely wrong? (I only started learning illustrator about 5 weeks ago)
Sorry for the background template being of poor quality, but this was taken from a book and scanned, so it's the best I could do.

You know something I think there should be a behavioral change in this case. To my way of thinking this option should automatically be disabled if you select the Mesh tool. If for some reason you want the mesh tool not to behave the way there might be a toggle or a double click to get the preferences for the tool 's behavior itself. I can see where this behavior can be useful but there needs to be a toggle.
Selecting the anchors for adding color with out accidentally creating a new mesh division is good thing but you need to be able to work both ways.
What do you think Scott Weichert you use the tool extensively, am i wrong?

Please help me , how idoc is generated with the transaction pu12?

Hi
please help me on pu12, how the idoc is generated.

Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are your fellow users.
You will have to work with the authorized service centers in India. Why did the service center you contacted say that they could not help you?
Regards.

Please help! How do you MMS with the Red BB Curve 8330m (4.5.0.131 software/firmware) on Sprint ?

Greetings!!!
I'm a newbie to BlackBerry devices but a long time user of cell phones and I have just one question which I hope isn't a difficult one to answer. I don't know if I'm missing something here, but how do you send an picture or photo via MMS? All I see in my message options is SMS text.
I just got the new Red BB Curve 8330m with the 4.5.0.131 software/firmware from Sprint.
I did a search here but didn't find an answer.
TIA for any help here!
Mark
(Ohio)
Sprint Simply Everything Unlimited Plan
Solved!
Go to Solution.

No problem, if it wasn't for questions there wouldn't be forum, Right?
So you checked the firewall, and you can receive, that means you have the application,
Have you ever done a battery pull or sent service books since receiving the device?
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

I am losing my mind with the Null pointer topic

Please please help I want to go home
Need to split file into equal sized subfiles, the number of subfiles specified by the user
import java.io.*;
import java.util.*;
public class SpecifyFiles
public static void main (String [] args)
    try //try 1
//open input stream
File inputFile = new File(Input.readString("Input Filename:"));
InputStream inStream = new FileInputStream(inputFile);
InputStreamReader inreader = new InputStreamReader(inStream, "8859_1");
BufferedReader reader = new BufferedReader(inreader);
int numOutputFiles = Input.readInt("How many files?:");
//open output streams
for (int j = 0; j < numOutputFiles; j++) // for loop 1
OutputStream fout= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout= new BufferedOutputStream(fout);
OutputStreamWriter out = new OutputStreamWriter(bout, "8859_1");
OutputStreamWriter [] fileHandles = new OutputStreamWriter[numOutputFiles];
int fileLength = (int)inputFile.length();
int newFileSize = fileLength/numOutputFiles;
byte [] byteArray = new byte [fileLength];
System.out.println(newFileSize);
//read data in and display them
inStream.read (byteArray);
//initialise the array of bytes
for (int a = 0; a < numOutputFiles; a++) // for loop 2
    fileHandles[a] = out;
   for (int i = (a*newFileSize); i < (a+1)*newFileSize; i++) //for loop 3
          out.write(byteArray);
} // for loop 2
out.close();
} //for loop 1
} catch (Exception ey) { ey.printStackTrace(); }
PROBLEM: IT IS ONLY PRINTING TO THE FIRST OUTPUT FILE

Yes. I have other code where the number of files the user wants is specified in the program itself, and that works perfectly.
If you see the code below, it splits a file into 5 separate files of equal byte size.
The only thing I want to change is that the user can specify the number of output files, and the program automatically prints the new separate files to that number of output files.
import java.io.*;
import java.util.*;
public class FileSplitter5
public static void main (String [] args)
try
//open input stream
File inputFile = new File(Input.readString("Input Filename:"));
InputStream inStream = new FileInputStream(inputFile);
InputStreamReader inreader = new InputStreamReader(inStream, "8859_1");
BufferedReader reader = new BufferedReader(inreader);
int numOutputFiles = 5;
//open output stream
OutputStream fout= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout= new BufferedOutputStream(fout);
OutputStreamWriter out = new OutputStreamWriter(bout, "8859_1");
OutputStream fout1= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout1= new BufferedOutputStream(fout1);
OutputStreamWriter out1 = new OutputStreamWriter(bout1, "8859_1");
OutputStream fout2= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout2= new BufferedOutputStream(fout2);
OutputStreamWriter out2 = new OutputStreamWriter(bout2, "8859_1");
OutputStream fout3= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout3= new BufferedOutputStream(fout3);
OutputStreamWriter out3 = new OutputStreamWriter(bout3, "8859_1");
OutputStream fout4= new FileOutputStream(Input.readString("Output Filename:"));
OutputStream bout4= new BufferedOutputStream(fout4);
OutputStreamWriter out4 = new OutputStreamWriter(bout4, "8859_1");
OutputStreamWriter [] fileHandles = {out, out1, out2, out3, out4};
int fileLength = (int)inputFile.length();
int newFileSize = fileLength/numOutputFiles;
byte [] byteArray = new byte [fileLength];
System.out.println(newFileSize);
//read data in and display them
inStream.read (byteArray);
//initialise the array of bytes
for (int a = 0; a < 5; a++)
     for (int i = (a*newFileSize); i < (a+1)*newFileSize; i++)
         fileHandles[a].write(byteArray);
out.close();
out1.close();
out2.close();
out3.close();
out4.close();
catch (Exception ex) { ex.printStackTrace(); }

Please help find my new skype account with the con...

I just cannot understand what to do here?
Is there a number I can phone to speak to a human being regarding my problem please?

Hi, gvj-gloria,
I would recommend you contact customer service for assistance; we here in the Community do not have access to Skype account files or records.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Please Help! Problems printing from Leopard with the Lexmark X5470!

Hi,
I have just installed Leopard, but the Lexmark X5470 printer I already had has stopped printing!? It will scan and clean the heads, but what ever i try i cannot get it to print???
I looked around the internet for a solution, and I found out that you could install the needed drivers from the Leopard installation disk. But after trying this it still would not print??
Please can someone let me know how i can get this to work?
Thanks in advance

Few questions for you:
1) Is the Snow Leopard disc gray?
2) How much RAM is in your computer?
3) How much free space is on the hard drive?
~Lyssa

Please help to get onhand stock report with last purchase and billed date warehouse and item wise

please help to get onhand stock report with last purchase and billed date warehouse and item wise

Hi Rajeesh Ambadi...
Try This
SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',
T1.LASTPURDAT ,t1.LastPurPrc
FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
WHERE
T0.ONHAND>0
AND T0.WhsCode ='[%0]'
Hope Helpful
Regards
Kennedy

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

Yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help

yesterday I have purchased Ipad2 with 3G but did not able see in built aceTime on my scree do we need to Install? please Help, yesterday I have purchased Ipad2 with 3G but did not able see in built FaceTime on my scree do we need to Install? please Help.

See this support doc on how to use FT... http://support.apple.com/kb/HT4319

Can anyone please help me, I'm having problems with sound while watching video clips using flash player using Internet Explorer\

Can anyone please help me, I'm having problems with sound while watching video clips using flash player & Internet Explorer

There's a good chance that this is a known issue. We'll have a Flash Player 18 beta later this week that should resolve this at http://www.adobe.com/go/flashplayerbeta/

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Please help my iMac will not start. The apple logo comes up and the wheel goes round and then I am left with an empty white sceen can anyone help

Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.

Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.

HT1420 Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

Please help.... cannot get into the ITUNES account. It says unknown error has occured. Is there a problem with ITunes?

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

Please help, i am losing my mind with the highlighting on my project

Similar Messages

Maybe you are looking for