Please Help! I created a PP file on a Mac and need to finish it on a PC? How do I change the sequence settings? Cross-platform usage??

I need to know this as soon as possible. How do I allow this file to work on a PC. Thanks

Yes I opened it and it said "This project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type."
So what I did is open a new file, clicked Import, clicked on the project I've been trying to open and imported the selected sequences, since it wouldn't let me import the whole project. Now all the clips are in a bin, but how do I put it on my timeline as if it were the whole project I was working on? If I select the imported file, the clips appear on the timeline all scrambled and just as that, clips. Essentially I have clips but need the sequence (project) I had created.

Similar Messages

I need help changing the sequence settings to my video

I shot on a JVC Everio in 720x480 29.97fps. I normally shoot in 1080x420 so I know the picture quality isn't going to be AS good. Normally, when I drag my clips into the timeline Premiere changes the sequence settings for me and everything looks fine. However when I drag this footage (the 720p) in, it becomes elongated and fuzzy.
I've messed around with the sequence settings by using DV-NTSC widescreen 48kHz and DVCPRO50 480i NTCS widescreen. When I drag my clips in they're cropped really close and they still look a bit off when I change the image to fit the screen (DVCPRO 50 looks a little bit better).
When I shot the video it looked crisp and clear on the monitor. I'm wondering if it looks strange because of the sequence settings and if so, what would be the best settings for this video.
The final video is going on youtube and I would like to make it look as good as possible!
Please let me know if you can help me out!

However when I drag this footage (the 720p) in, it becomes elongated and fuzzy.
What 720p? You gave us two frame sizes. Neither of them are 720p.
1080X420 is a very strange frame size. And you say it is normal? A 720p video is 1280X720 non-interlaced.
Chances are very good that it is 480i video you shot with a frame size of 720X480 and it is interlaced.
That video should be interpreted with a Pixel Aspect Ratio (PAR) of 0.9091 (rectangular pixels that are taller than they are wide) - and what that means is that it isn't 16:9 it is 4:3 and should be edited in a 4:3 sequence. If, however, Premiere Pro is seeing the footage as having a PAR of 1.0 (square pixels) then you may have to right click on the clip in the Project Panel and select Modify|Interpret Footage and set it to D1/DV NTSC (0.9091)

Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

For sideloaded content the nook pulls the metadata from ePub file itself. I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so no you can't them to behave exactly alike without converting the files.

PLEASE HELP - JAI create a tiff file

Hi people,
I am trying to reate a TIFF file compressed for a Fax Server. The resolution of such an image must be 200dpi by 100dpi as per server requirements.
I am managing the create a tiff file with these requirements. However, since I am using a resolution of 200dpi by 100dpi, the final image is squashed vertically. The following is the code which I am using.
// loading the image
RenderedImage src = myCreateImage();
// this is a proprietary method which returns a RenderedImage
// Specifing the tompression Group
TIFFEncodeParam param = new TIFFEncodeParam();
param.setCompression(TIFFEncodeParam.COMPRESSION_GROUP4);
//set the image resolution to 200 x 100
TIFFField[] extras = new TIFFField[2];
extras[0] = new TIFFField(282, TIFFField.TIFF_RATIONAL, 1, (Object)new long[][] {{(long)200, (long)1},{(long)0 ,(long)0}});
extras[1] = new TIFFField(283, TIFFField.TIFF_RATIONAL, 1, (Object)new long[][] {{(long)100, (long)1},{(long)0 ,(long)0}});
param.setExtraFields(extras);
OutputStream outputStream = new FileOutputStream ("c:/test.tif");
TIFFImageEncoder encoder = new TIFFImageEncoder (outputStream, param);
encoder.encode(src);
outputStream.close();
outputStream = null;
Any help would be highly appreciated
Thanks & Regards
George Azzopardi

Maybe it's because you're not setting the resolution unit (tag 296)
Example:
TIFFField[] extras = new TIFFField[3];
extras[0] = new TIFFField(282,TIFFField.TIFF_RATIONAL, 1, (Object)new long[][] {{200,(long)1},{(long)0 ,(long)0}}); //x
extras[1] = new TIFFField(283,TIFFField.TIFF_RATIONAL, 1, (Object)new long[][] {{100,(long)1},{(long)0 ,(long)0}}); //y
//set resolution unit to inches
extras[2] = new TIFFField(296, TIFFField.TIFF_SHORT, 1, (Object) new char[] {2}); //2 for inches
param.setExtraFields(extras);

Files that used to be visible are now hidden in Mavericks. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.

Files that used to be visible are now hidden in Mavericks 10.9.1. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.
I am having trouble locating such files as PDF's INDD, AI etc. When I view all hidden files and try to open it in the program..it looks like it is really not on the drive. Has anyone come across a solution?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

HT201210 Please help - error message saying 'filmware file is not compatable', and videos will not transfer from phone to computor. what can i do?

As title says, I keep having this error message 'filmware not compatable' and my videos will not load.
Can someone please help this very non-tech-savy lady???!!
Cheers in advance

Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business.

How do I change the Export settings for video to itunes.It is set at exporting at 128kbps I want a higher setting.can Someone please help me?

Hello can someone please help me?I am trying to export a video from garageband to itunes.The settings are set and the audio is 128kbps.I obviously want them higher at least 192.Where can i find that option on here for exporting videos?

The Three Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I create an encrypted file on my mac and it always opens without the password. Wh,y?

I have tried several times to create an encrypted file on my iMac, following the procedure Apple lists, using Disk Utility. Each time, the file opens without requiring a password. Hence, there is no security. What am I doing wrong?

Apparently, you missed this salient part:
If you select “Remember password in my keychain,” anyone with access to your computer may be able to open the disk image without entering the password.

How do I change the opacity settings for photoshop imported files?

I am importing a series of photoshop files into CS6 Premiere Pro. There is no background color on the photoshop images, and when I preview them in Premiere's import window, the background appears white. Once I import them into premiere, however, the background becomes black.
I read that a completely transparent alpha channel from photoshop is rendered as black in premiere, so I tried placing a plain white image in another video track so that it might change the transparent background to white. It didn't work-- the background if each image is still black.
How can I make a non-existant background layer from my photoshop images appear as white in Premiere, without having to change each file individually?
Thanks!!!
Alex

Nevermind-- I figured out that if I modify> interpret footage> ignore alpha channel, and leave the white background on a lower video track, the background appears white!

How to find out the Sequence settings of a created sequence?

I have had a problem come up a few times where I am switching back and forth from one format to another, I frequently work on multiple edits, and my sound goes out of sync. This is usually because the sequence is set wrong (from when I switch and forget to change it back) and when exported it compresses the audio wrong. How do you find out what the settings are for a sequence you are working on when it's open in the FCP timeline? I'm looking for a quick way to rule out the sequence as part of the audio sync problem.
Thanks,
-Bluecast

Or Command-0. What about Easy Setups? I use them routinely so that I don't have to think about setups. Once the setup is saved and properly used, all the settings for sequences and hardware are easily made for you.

For some reason my app store email is incorrect on my ipad 1 how do i change the email address? please help me as this is most frustrating. i want to use the same email address i use on my Iphone and I mac

Please help.
for some odd reason my app store email address on my Ipad 1 is incorrect. How do i change it?
i would like to use the same email address i use on my I Phone and I Mac
Please help as i find this situation most frustrating.
many thanks
Joao

Do you perhaps have more than one Apple ID? If your response is "No," are you absolutely positive?

Newbie stuck - how do I change the file type of a photo I am formatting from a TIFF to a JPG?

I am new to Aperture and struggling to figure out some of the basics, even with the tutorials. I need to submit a photo for an art competition - the master is a TIFF and I need a JPG under 1.8 MB - how do I change the new version's file type and keep it with the master?
Thank you in advance.

I can't recommend the method proposed by Carolyn Samit; in fact, I recommend ignoring it.
Aperture is large, complex, and can take some time to learn to use. It is also quite powerful, and can handle nearly all -- or all -- common tasks you throw at it.
I have written a very short guide to Aperture which was intended to provide some firm footing for those getting started. I humbly suggest that you start with a quick review.
One of the things that presents a bit of disorientation for new users is that, in practice, Aperture keeps your pictures in a kind of limbo. There are good reasons for this -- suffice it for now to accept that you import image-format digital files into Aperture, you use Aperture to organize and optimize these as Images, and then when need a file to use outside of Aperture, you export you Image. It is at export that you format your Image: you select the file type, the compression amount, the file name, the file size, and more.
In your case, then, you will export your Version, and set the file type to TIFF (recommended above JGP whenever quality is paramount). There is no way to know the file size in bytes prior to creating it. Start with a full-size TIFF and, if necessary, knock it down by percentage until the exported file is less than 1.8 MB.
There is no reason to attempt to keep this file with the Image in Aperture. Send it on its way. Any time you need another file from your Image, you can create it fresh via "File→Export→Version".
HTH. If it doesn't, ask more.
Message was edited by: Kirby Krieger -- expanded a bit.

Please help me creating a new listener with different port#.

I have two instances in a server. both have different homes. I want to create a seperate listener for the second one i created.
But that is not happening.
here i tried to give name from LISTENER TO LISTENER1 & Port# from 1521 to 1524.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /apps2/oracle)
(PROGRAM = extproc)
LISTENER1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = aixth53)(PORT = 1524))
When I check lsnrctl status with LISTENER1 , it still shows the other instance home with port#: 1521
Please help me creating a new listener with different port#.
Thanks,

marist89 wrote:
sb92075 wrote:
marist89 wrote:
sybrand_b wrote:
The listener is a broker only and doesn't play any role in normal communications.
It just forks a process or a thread, and that's it.And the listener is a single point of failure. Listener goes down, you can't connect to the db. That's why you need two listeners.If listener one goes down, then listener two goes down for exact same reason since it is a single executable file.I'm not playing tit-for-tat with you. Fact is, there are situations where people who are not you might want to use more than one listener.Some folks might want to jab a sharp pencil into their eye, too.
Just because you can do something, it does not necessarily mean it should be done.

Please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

please help me with msi installer file for 11.6.8.* as this is our standard version which we use for all machines in our organization

arai-c wrote:
I have full version of this software but I am not able to install it silently because it always gives Google toolbar pop up which We dont required
arai-c wrote:
the problem is we dont have msi file for 10.6.*.* and hence I am not able to create package for it
I don't understand; two days ago you wrote that you have it, now you don't...?
If you don't have it, then why not deploy the current version 12.1.3.153 - I don't see the point of installing an old, unsecure software version.

IPhoto is changing the sequence of the photos I have in my file for the book I want to create. Help?

iPhoto is changing the sequence of the photos I have in my file for the book I want to create. Help?

The problem has been solved. As it turns out, I was highlighting the photos in the album I wished to create. And then generating the request for a book. This caused the photo images when loaded into the book format to revert to the sequence used when I originally loaded them into the album. Not the edited sequence. Turns out that I did not need to highlight the photos. By eliminating this step, they remained in the edited sequence.
Thank you for responding. Warmly, Janice huseby

Please Help! I created a PP file on a Mac and need to finish it on a PC? How do I change the sequence settings? Cross-platform usage??

Similar Messages

Maybe you are looking for