Please help, I don't know how to overclock my proccessor, and ramm..
hye..i'm new here..as u can see, i have a good rig..but the problem is, i don't know how to utilize it..i even don't know how to start overclock my pc...huhuh..somebody, can give me some suggestion...
Quote from: HU16E on 26-May-09, 19:27:17
Yes, Prime 95 is a system stress testing utility. Here is the link to a bunch of useful utilities. You will need to screen them for the ones that only apply to your needs & system. Forum 'Sticky' OCUBA - OC Utilities & Benchmarking Apps. https://forum-en.msi.com/index.php?topic=107133.0
thanks bro.. :biggthumbsup:omg..after i applied it..my temp becomes 41 on idle..before this, it is 38-39...i've ran the intel burn test and it tells me that my system is running stable on 3.33GHz... ..
by the way, when i let it on stock (3.0GHz), my cpu-z shows my core speed 2400 GHz and only 6.0 for my multiplier, wherelse in the bios stated my core speed is 3.0ghz and multilplier is 9.0..this is acutually the stock one...why is that in the cpu-z is different from the actual...
your 3dmark test for your first rig is 21000... ..how do you make it till 21000..i've just test it on mine and it was only 16000... ...is it only depends on our graphic card..??..i'm using only GECube HD4870 512MB..
Similar Messages
-
Please help I don't know how to verify my apple I'd so I can download facebook
Please help me verify my apple Id I don't know how or where to go
Missy 143 wrote:
Please help me verify my apple Id I don't know how or where to go
See your other post on this Topic > Help please -
Well I was experimenting with stuff and then I tried something and then it removed them I have searched everywhere in the options but now I don't know where else to go can anyone help? :(
Thanks, that gets me so far. Following entering about:config, I get the usual page of links to various sites including links to browser.places.smartBookmarksVersion but clicking on these links just opens a website which doesn't help because no website gives any opportunity to double click on anything and change its value. How do I get browser.places.smartBookmarksVersion in a form where I can change its value?
-
Please help, I don't know how to use mainstage in the way I want.
All I want to do is take the midi tracks that I recorded in Logic Pro X and have them visible on Mainstage. Then I want to be able to write automated vocal effects I can sync up to and perform with while the song plays. Is it possible to do this?
Try rebooting the iPad one more time. Try using recovery mode again and if that still doesn't work, make an appointment at an Apple Store and ask for their help.
iOS: Unable to update or restore - Apple - Support -
i don't know how to download adobe acrobat reader. could some one please help. i don't know much comp terms
Mark this discussion as a question-this encourages people to answer for points and helps you track answers.iv'e been on that page a dozen times. it just gets me into an endless loop.
i need instructions i can understand and do what they tell me to do
In a message dated 2/18/2015 9:04:06 P.M. Central Standard Time,
[email protected] writes:
i don't know how to download adobe acrobat reader. could some one please
help. i don't know much comp terms
created by Jerry Klaimon (https://forums.adobe.com/people/Jerry+Klaimon)
in Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/7208793#7208793) -
i have v card which contains 14 mb ,but i don't know how many contact it contains ,and i m not able to transfer to my i cloud what to do??
Here is a link to a previous discussion that may help: https://discussions.apple.com/thread/5344761?start=0&tstart=0
-
Gantt chart: Don't know how to use the tooltipkeys and toolkeylabel
I have a problem. Don't know how to use the tooltipkeys and toolkeylabel. I used jquery to select the gantt bars and on mouse over i was getting the task id "tid" then passing it to adf bean with serverlistener and showing a popup that is adf component with javascript. For positioning of the popup I used a button that has width and height 0 and has position absolute and gets the coordinates of the mouse.
"div[et]" is a jquery selector that selects all the elements that have attribute et. I noticed that all the bars have that attribute as a few other attributes as well "part"...
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
xmlns:dvt="http://xmlns.oracle.com/dss/adf/faces">
<af:document title="untitled1.jsf" id="d1">
<af:resource type="javascript" source="https://ajax.googleapis.com/ajax/libs/jquery/1.7.0/jquery.min.js"/>
<af:resource type="javascript" source="resources/js/home.js"/>
<af:messages id="m1"/>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb1" inlineStyle="visibility:hidden; width:0; height:0" />
<af:popup id="noteWindow" contentDelivery="lazyUncached" binding="#{homeBean.popup}">
<af:noteWindow id="popupWindow">
<af:panelFormLayout id="pfl2">
<af:panelLabelAndMessage label="Task id" id="plam5">
<af:outputText value="#{homeBean.taskId1}" id="ot64"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Start Location Name" id="plam6">
<af:outputText value="#{homeBean.startLocation}" id="ot7"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="Stop Location Name" id="plam7">
<af:outputText value="#{homeBean.stopLocation}" id="ot8"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="tasktype" id="pla2m7">
<af:outputText value="#{homeBean.taskType}" id="ot9"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</af:noteWindow>
</af:popup>
<af:serverListener type="jsServerListener" method="#{homeBean.serverEventHandler}"/>
<dvt:schedulingGantt id="gantt1" value="#{bindings.PersonView1.schedulingGanttModel}" var="row"
startTime="2011-07-04 00:00:00" endTime="2011-07-04 23:00:00" summary="gsg"
showMenuBar="false" showToolbar="false" iconPlacement="left"
showTasksAsDailyBar="false">
<f:facet name="major">
<dvt:timeAxis scale="days" id="ta1"/>
</f:facet>
<f:facet name="minor">
<dvt:timeAxis scale="hours" id="ta2"/>
</f:facet>
<f:facet name="nodeStamp">
<af:column sortProperty="#{bindings.PersonView1.hints.PersonId.name}" sortable="false"
headerText="#{bindings.PersonView1.hints.PersonId.label}" id="c1">
<af:outputText value="#{row.PersonId}" id="ot1">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.PersonView1.hints.PersonId.format}"/>
</af:outputText>
</af:column>
</f:facet>
</dvt:schedulingGantt>
</af:form>
</af:document>
</f:view>javascript:
$(document).ready(bindEvents());
function bindEvents() {
$("div[et]").live('mouseover', function (e) {
$('#cb1').css("position", 'absolute');
$('#cb1').css("top", e.pageY-4);
$('#cb1').css("left", e.pageX);
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
var element = AdfPage.PAGE.findComponent("f1");
var taskIdToPass = null;
if ($(this).attr("tid") !=undefined) {
taskIdToPass = $(this).attr('tid').toString();
} else {
taskIdToPass = $(this).parent().attr('tid').toString();
var param = { taskId : taskIdToPass };
AdfCustomEvent.queue(element, "jsServerListener", param, true);
if (!popup.isPopupVisible()) {
var hints = {};
hints[AdfRichPopup.HINT_LAUNCH_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN_ID] = "cb1";
hints[AdfRichPopup.HINT_ALIGN] = AdfRichPopup.ALIGN_AFTER_START;
popup.show(hints);
}).live("mouseout", function () {
var popup = AdfPage.PAGE.findComponentByAbsoluteId("noteWindow");
popup.hide();
};My bean that is session bean:
package view;
import oracle.adf.model.BindingContext;
import oracle.adf.model.binding.DCDataControl;
import oracle.adf.view.rich.component.rich.RichPopup;
import oracle.adf.view.rich.render.ClientEvent;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.RowSetIterator;
import oracle.jbo.ViewObject;
public class HomeBean {
private RichPopup popup;
private String taskId1;
private String startLocation;
private String stopLocation;
private long taskId;
private String taskType;
public HomeBean() {
super();
public void serverEventHandler(ClientEvent clientEvent) {
String taskIdString = clientEvent.getParameters().get("taskId").toString();
this.taskId = Long.parseLong(taskIdString);
DCDataControl dc1 = BindingContext.getCurrent().findDataControl("AppModuleDataControl");
ApplicationModule am = dc1.getApplicationModule();
ViewObject vo = am.findViewObject("PdTrfDayView1");
RowSetIterator rowSetIterator = vo.createRowSetIterator(null);
Row[] rows = rowSetIterator.findByKey(new Key(new Object[] {taskId}), 1);
Row row = rows[0];
this.taskId1 = row.getAttribute("PdTrfDayId").toString();
this.startLocation = row.getAttribute("StartLocation").toString();
this.stopLocation = row.getAttribute("StopLocation").toString();
this.taskType = row.getAttribute ("PdTrfTypeId").toString();
RichPopup.PopupHints ph = new RichPopup.PopupHints();
vo.closeRowSetIterator();
public long getTaskId() {
return taskId;
public void setPopup(RichPopup popup) {
this.popup = popup;
public RichPopup getPopup() {
return popup;
public String getTaskId1() {
return taskId1;
public String getStartLocation() {
return startLocation;
public String getStopLocation() {
return stopLocation;
public String getTaskType() {
return taskType;
}I am wondering If i can use setCurrentRow on the iterator that i create and use it for displaying on the popup instead of binding startLocation and stopLocation to the bean and if there is any benefit of that at all...
Edited by: 897833 on Nov 24, 2011 11:37 AMHi,
To use tooltipkeys and tooltiplabel in gantt, you can add following code in managed bean
public String[] getTooltipKeys()
return new String[]{"columnA", "columnB", "StartDate", "EndDate"};
public String[] getTooltipLabels()
return new String[]{"A", "B", "Start Date", "End Date"};
where , the string array in the ToolTipKeys represents the columns, of the table you have in the gantt component , and the string array in TooltipLabels displays the label you want to display for the table columns.
In the jsff, you could call the bean methods as follows:
tooltipKeys="#{GanttBean.tooltipKeys}"
tooltipKeyLabels="#{GanttBean.tooltipLabels}" -
Help, I don't know how to solve this...
Hello People, srry for other threat but it's an emergency because I need to finish this program and I couldn't solve the problem
I add a picture that you can see the graph and the table...but there is a problem in a table 00 00 00 00 01 01 01 I only want to take samples every 0s, 1s, 1.5s ..
And I don't know how to do this. Another problem is the "hold", I put this button to stop the while loop and the table and then use save to excel but it doesn't work this button.
sorry..people but I need help...and the other threats nobody help me
Attachments:
capacitor.png 104 KB
capacitor.vi 2008 KBjocuma wrote:
Maybe yes..But I don't have time..
It will take less time than sitting and waiting for multiple answers to walk you through it step-by-step, especially overnight (which, for me, starts now). Once you've gone through these, maybe the help screens in LabVIEW and all the knowledge base stuff, whitepapers, etc. on the NI website will make more sense.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ -
Unable to open Adobe Creative Cloud. Please Help! Don't know what I am doing.
I quit out of the CC icon on the Apple Toolbar and couldn't get it to reappear yesterday. Today it has appeared but it is 'inactive', ie. in grey. When I position my mouse to it, I get the 'spinning colour wheel of death'. To make things worse, I then couldn't get the app to open from Applications. I got the error:
I then tried to uninstall the app, and reinstall it from the site, and received this message:
I don't know where it's opened, and now I trashed the app to be able to reinstall the Creative Cloud app, but am receiving the same message.
Someone please help! It's driving me nuts!!Moving this discussion to the Creative Cloud Download & Install forum.
Babaa I am sorry you are facing difficulties utilizing your Creative Cloud Desktop application. Please try the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to reinstall your Creative Cloud Desktop application. -
Help! Don't know how to upgrade my Safari : (
Hi...when I try to go to certain pages using my Safari (AOL for example), I'm told that the technology isn't supported by my current browser and that I should download an updated one. I don't know what to download though...I have the MAC OS X 10.2.8 version. I tried to download a couple things through Apple, but they never ended up working. I know this is probably very simple, but can anyone help me please? Thank you!!!
Hello,
Safari, along with most all Apple software that ships with the computer will get it's updates from the Software Update. Found in your System Preferences.
To see if updates are available, open Software Update and click "Check Now".
Other than that, you can largely ignore the message generated by the web site. This is typically an error that is passed to the web browser as it has been coded to a specific browser, usually IE.
By ignoring this, you MAY see parts of pages differently than if you would on IE, or parts may not function at all.
A good site will conform to the World Wide Web Consortium standards so this does not happen. The problem lies in the fact that people have made web functions that are browser specific.
There are other browsers available for Mac OS X. I like Safari but also use FireFox, Opera and IE.
Beavis2084 -
Photo booth isn't connected help i don't know how
photo booth isn't plugs in i don't know how
Hi andrefromsunland,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you mean that Photo Booth isn't connecting to the built-in iSight camera on your Mac, you may find the troubleshooting steps outlined in the following article helpful:
How to Troubleshoot iSight
http://support.apple.com/kb/HT2090
Regards,
- Brenden -
Please help, I don't know WHAT is wrong......... (games troubleshooting)
OK, so one night I was playing the game Lode Runner, Bejeweled, and Pacman. It was fully charged. I played until 10% was left. Then, I set it on my iHome. The next night, I can't get the game to fit the screen. Like a 1/2 in. from the left if you have the click wheel in your right hand. I turned it off for 24 hours and that didn't work. I need your help. Only the games I bought do that. Not the others, just those. Please help.
I got it fixed, so if it ever happens to you, restore your iPod at the iPod page under Summary.
-
I Need help in my nba2k15, it always quit.
Delete the app and reload it.
Also, update your IOS to 8.1.3. -
I thought that my account had been hacked and that might be the reason I could not get my 2 different e-mails. Also, at the same time this happened, I could not get into Internet Explorer. I could still get into and use Open Office during the above problems
Thank you for the info re. the main menu. Your answer I used worked; however, the menu bar all the way across is solid black. The only way I can find out the names on the menu is to point the cursor from left to right over the black bar to find "file" "edit" tools", etc. What do I need to do to get these menu titles to be seen?
As regarding the GMail --the menu bar used to have an envelope symbol which was white and outlined in red. That disappeared. I googled "mail.google.com" to try to get back my email. This didn't work. I then tried to get a different email address and password--after 8-19 attempts, this never worked. My other email (sbcglobal.net) has never returned. So I don't know where that went or how to get it back -
I loaded my Iphone 3 from Itunes and don't understand how to delete all these songs to add a new library of songs
Can I do it from my Iphone or do I have to do it through Itunes. HELP plz!You can delete songs direct from the iPhone.
To add additional songs from your iTunes library on your computer is done with iTunes on your computer via the iTunes sync process. You can remove all the existing and transfer different songs, albums, genres, etc.
Maybe you are looking for
-
LiveCache DB backup failure due to error code "903".
LC DB BACKUP was failed due to backup devices issue '903'. When I did the BACKUP to FILE instead of PIPE, it worked well. Pls suggest. Thanks. Base on the configuration 'dbm.mmm'. Here is the definition for PIPE 'BACKTSM', which is the current BACKUP
-
Variable Vlaue restriction in a query
Hi, I have an order type variable (0COORD_TYPE) as a part slection criteria in the query . The Requirement is I want to have the variable for order type have a default that excludes the certain order types ,BUT the user can change to include if they
-
Error in BizTalk Web Service publishing wizard BizTalk 2013
Hi, I am facing an error when i am trying to publish a BizTalk orchestration as a Web Service. It is a very generic error message that is popping up. Failed to create project "http://localhost/mycode.Orchestrations_Proxy". Object reference not set to
-
Video playback issues in Captivate 6 swf when viewed in testing environment
I've created a training video from a company template in Captivate 6 and produced a swf file. It plays from my local machine and has been tested by others from our SharePoint portal. I uploaded the project through to our Team Foundation Server in ord
-
Question - What to do when 3G iphone freezes up when dowloading/syncing pictures??