Please help! i keep getting blue screen on my window xp 32 bit

hello everyone,
currently i built a desktop using the following components
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model TWIN2X4096-8500C5DF
LG 22X DVD±R DVD Burner with LightScribe Black SATA Model GH22LS30
AMD Phenom 9600 Agena 2.3GHz Socket AM2+ 95W Quad-Core Processor Model HD960ZWCGDBOX
XCLIO Windtunnel Fully Black Finish 1.0 mm SECC Chassis ATX Full Tower Computer Case
MSI K9N2 SLI Platinum AM2+/AM2 NVIDIA nForce 750a SLI ATX AMD Motherboard
MSI N9600GT 512M GeForce 9600 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
Seagate ST3640323AS 640GB 7200 RPM SATA 3.0Gb/s Hard Drive
my desktop was fine until i i did all the updates for my window xp (32 bit) and install AVG anti virus 8.0. everytime i get into window, it show me a blue screen and telingl me the system crash. can someone please help me out. thank you

Quote
TWIN2X4096-8500C5DF
Those are factory overclocked DDR2-800 modules, not real DDR2-1066 sticks. Test them at their native JEDEC-Standard DDR2-800 settings (DDR2-800 @5-5-5-18 @1.8V +/- 0.1V) and see if you are still getting BSODs.

Similar Messages

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

Iphone 5 keeps getting blue screen and turning off, and wont go bk on

my iphone 5 keeps getting blue screen, turning off and not going bk on for a few hours then it comes on ive reset phone works then it starts doing same problem over again

Hey there aussiekris,
It sounds like your phone is unexpectedly turning off. I suggest the troubleshooting steps outlined in this article named:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and vwith or with virus protection on here is post This installation package could net be opened verify that the package exist and that you can access

how to install when I keep getting the following massage on windows 7 64 bit with or with firewall on and with or with virus protection on here is post " This installation package could net be opened verify that the package exist and that you can access" same when trying to install quicktime

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Please help. Keep getting Spinning Rainbow Wheel

Can anyone help please I keep getting this when ever I open a new tab in a browser or whenever I do "anything", the little wheel comes up for about 2-3 seconds, even when typing this right now it's happened. Even if i decide to open a new application it starts up.
I have
Intel i7 Quad
1TB Harddrive
4GB Ram
27" iMac (2010)
1 GB Nvidia Graphics
Now the system has run fine since I had it, now that the apple care has run out it's decided to play up, I've been using apple for 10 years mostly because it's hassle free but this is seriously annoying. I can't do anything?
I tried playing several games too; World of Warcraft, same thing keeps stuttering with wheel. Same with Starcraft.
I've never had any problems before, ever. Been able to play and multitask sometimes without even the slightest problem.
Now I can't even type this query without the wheel happening.
Things I've done to stop it:
-lowered graphics on games
-restarted/shutdown
-opened in safe mode
-run a disk repair
Nothing is working, it's really disheartening, and frustrating.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

Please help!! x100e blue screen issue

Hey everyone,
I'm new on here, trying to help out my sister who's in school and so far failing miserably!
She has a x100e and developed the blue screen issue.
I did a bunch of reading on it- but have never seen an error message.
I formatted the hard drive for her (it needed it anyways) hoping that would help. It didn't. It also lost the wi-fi, I had to download a new driver from lenovo to get the wi-fi working again. It is now working, but still has the blue screen.
Any help? I wanna give it back to her but proving to be useless.
Thanks for any and all help!

How will anyone help you w/o error message on the top of blue screen and problem signature description?
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Please help, I keep getting an error code 45054 when I try to download an app?

I keep getting an error code 45054 when I try to download an app on my Macbook air.

Follow the instructions in this support article.

Mac gets blue screen while installing Windows 7 with bootcamp

I had a problem while trying to install Windows 7 Ultimate 64-bit on my MacBook mid-2010. When i would create the partition using bootcamp assistant and my computer restarted into the install process, i would get a blue screen. The blue screen would occur after my computer restarted and was completing the installation. If I try to reboot the machine, it gives me an error "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click ok to restart the computer, and then restart the installation." I first tried this on yosemite, but when it was not working I tried wiping the hard drive and i installed mavericks. I got the same problem, so it does not have to do with the OS. I have installed Windows 7 32-bit on this computer before. But i still get the same error with 32-bit also. I know that this computer supports windows 7 and 64-bit too. If anyone know why this might be happening and how i can fix it, please let me know. Thank you.

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

Please help! Keep getting error message "an internal error occurred"

Hello,
I'm trying to install Adobe Reader 10.1 on my macbook, but after (what looks like a successful download of Reader), when I try to open up a pdf I get the message "an internal error occurred." From here I am forced to click "OK" and then I just get a blank screen.
I've tried to unistall and reinstall all Adobe files several times, but always get the same error message.
Here's what I'm working with:
Mac OS X - Version 10.5.8
Intel Core 2 Duo
Safari - Version 5.0.6
I'm not super-tech savvy, I just need to download this program to be able to use an online training module for school.
Thanks.

Hello,
I have had the same problem and ended up spending about 4 working hours resolving it, although I have a master degree in computer science.
The problem is caused by an incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10. It is very strange that this error was not discovered during Adobes in-house quality control. I expect such tests should have been performed prior to making new releases, in order to spare problems for users. Also, I would expect better error management in a software product of this calibre. If a missing file ends up causing a crash, one might wonder if there are also security critical flaws in the software related to e.g. parsing PDF documents.
Problem description:
After agreeing to the license Adobe Acrobat says "An internal error occurred" and crashes. No further information given.
The system log reads ([…].com.adobe.Reader[220]) Exited abnormally: Interrupt
Executing the binary directly from the terminal with -O flag gives no data on standard output. Other crash log reveals no interesting information.
Solution:
After some investigation, found crash is caused when /Users/[username]/Library/Application Support/Adobe/Fonts/AdobeFnt06.lst is accessed.
Hence due to incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10.
The installer/uninstaller should probably have removed the file.
I could delete the above file since I no longer use v6.0/7.0, and the problem was then resolved.
Prior to this I had also deleted some of the com.adobe.* preferences from
/Users/[username]/Library/Preferences
/Library/Preferences
etc.
although I am not sure if this was necessary.
Hope this helps.
/Martin

PLEASE HELP! Keep getting Unknown error (13019) since OS4 load!

Hi,
I've seen the TS2830 and tried EVERY solution including making a new account on my system and still can't sync my iPhone. As a last resort I unselected Sync Music and wiped everything off the iPhone now I can't get it back!!!! AAHHH! I tried only syncing part of my library and still does not work. It looks like it goes thought everything (progress bar counts all the tracks) and then at the ends with the popup "iTunes" "The iPhone "Ray's iPhone" cannot be synced. An unknown error occurred (13019)"
I'm desperate to solve this.
The Windows Event Viewer shows the following errors after each sync attempt:
Log Name: Application
Source: Bonjour Service
Date: 6/29/2010 10:45:12 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Mediacenter
Description:
380: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-06-29T14:45:12.000000000Z" />
<EventRecordID>6349</EventRecordID>
<Channel>Application</Channel>
<Computer>Mediacenter</Computer>
<Security />
</System>
<EventData>
<Data>380: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)</Data>
</EventData>
</Event>
Log Name: Application
Source: Bonjour Service
Date: 6/29/2010 10:45:12 AM
Event ID: 100
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Mediacenter
Description:
500: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Bonjour Service" />
<EventID Qualifiers="0">100</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-06-29T14:45:12.000000000Z" />
<EventRecordID>6348</EventRecordID>
<Channel>Application</Channel>
<Computer>Mediacenter</Computer>
<Security />
</System>
<EventData>
<Data>500: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)</Data>
</EventData>
</Event>
Any help would be greatly appreciated!
Thanks,
Ray Laureyns

Well, I've isolated it down to 1 of 1779 songs from my 3890 file library! THIS STINKS!!!!!!

Please help I keep getting this message, cannot open files from server

Nov 18 11:47:25 design-2s-mac-pro.local mdworker[1046]: (Normal) Import: Using too many resources after 1920 files (wired: 0 resident: 3358 swapped: 0 regions: 2076), hit usage threshold importing /System/Library/Frameworks/Tk.framework/Versions/8.5/Resources/Scripts/tearoff. tcl, exiting to clean up now.
a window pops up with the warning "The software cannot be found" along with a "Document" icon - the blank sheet of paper with the corner folded down.

Getting this message from what application? Are you in the terminal? What are you doing?

I just started using this again and getting blue screen often

Tecra M2V-S330 Running Windows XP Service Pak 2 I just started using this notebook again as my wife took my new one over. It works alright but I keep getting blue screen and it shuts down. I have to restart it all the time. I cant read the blue screen errors but I am pretty certain I need a new hard drive. Can anyone help? I think I should buy a new hard drive. I have the backup disk but on this unit I cant find the hard drive? On my other notebook I found the hard drive unscrewed and replaced it no problem. This one is weird I know its a 40gb but can I put a 60 in? The notebook says the hard drive is MK4025GAS Any help would be awesome!
Message Edited by TECRAM2VS330 on 02-05-2009 07:03 AM

Tecra M2V-S330
I cant read the blue screen errors..
The default for a Stop error is to automatically restart the computer. Let's fix that so you can see the error message.
Open System Properties (sysdm.cpl). On the Advanced tab, click the Settings button at the bottom under Startup and Recovery. Clear the Automatically restart check box.
Report the Stop errror and any file name mentioned on the blue screen.
-Jerry

My laptop (GX70-3BE) keeping having blue screen recently PLEASE HELP~

Recently my laptop keep having blue screen about "memory management" problem .However i got use Windows Memory Diagnostic to fix it but it give me notification about .After i fix this problem well not so long again..it will blue screen again.i guess me really need send it to warranty already..i want know more how about in warranty malaysia

Hello, shall you find another section for Notebook discussing. :D

Please help! i keep getting blue screen on my window xp 32 bit

Similar Messages

Maybe you are looking for