Please help! I keep getting the sad face icon

according to the troubleshooting steps i am supposed to restore my ipod if the sad face shows up... and i tried but my computer no longer recognizes my ipod... so i tried to switch to disk mode and that won't work... and now my ipod wont even charge anymore what should i do?

The Sad iPods icon or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10.Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

Similar Messages

  • TS1373 I have an ipod model A1099 and i cant get it to restart. I keep getting the sad face icon and the battery wont charge even tho I out a new battery in it

    I cant seem to get my ipod working even tho I put a new battery in it I keep getting the sad face icon and i cant restart it

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I was syncing my ipod (1st gen) while downloading an update to Itunes and now i get the sad ipod icon...can someone help me out or explain how to get it fixed? cause the Apple STore is acting weird and I don't know what to do

    basically the title says it all...I've been using this for the longest time and now after i was syncing the ipod while downloading an update for Itunes the sad face ipod icon shows up and everything i try won't fix it. I'm wondering if anyone knows how they can help me fix it...please!

    The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
    I assume you have seen this article yet?
    iPod display's a sad iPod icon
    If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
    https://discussions.apple.com/thread/1193481?start=0&tstart=0
    B-rock

  • Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Please help.  Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

    Sara,
    Please see my answers in bold below.
    What browser are you using? Try clearing the cache, or using a different browser. N/A
    Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
    Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
    Make sure the file is within the file-size limit of 100 MB. It is <40.
    I get the error message, "File failed to be converted using Adobe ExportPDF online."
    Thanks for your help in advance.

  • Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

    Is it possible to run BBC iPlayer from an iPhone4 through AirPlay to Apple TV2 please? I keep getting the message "An error occured loading this content. Please try again later"

    First, try a system reset on the iPod.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If that doesn't work, reset the Apple TV.  I'm not at mine right now and I'm talking from memory but the reset is somewhere in the Settings menu.

  • I am getting a sad face icon and my ipod then shuts off

    I am getting a sad face icon and then my ipod shuts off

    http://support.apple.com/kb/TS1373

  • CANT GET RID OFF THE SAD FACE ICON ON MY 30 GB IPOD VIDEO, HELP

    HELLO, IVE JUST PURCHASED A BRAND NEW 30 GB IPOD VIDEO AND SINCE I FIRST TURNED IT ON, THAT AWFUL ICON WITH THE SAD FACE IPOD APPEARED. I DID ALL TIPS AND HELPFUL HINTS PUBLISHED AT APPLES WEB SITE BUT STILL CANT MEKE IT WORKS.
    PLEASE HELP ME!!!!!!!

    I can only suggest trying the steps here again: "iPod does not appear in iTunes or on the desktop, an exclamation point or sad iPod icon appears onscreen" http://docs.info.apple.com/article.html?artnum=61771
    If after a couple more tries it is still malfunctioning then return it to the store, good luck

  • Get a sad face icon on ipod with website for support

    I've been playing my ipod through altec speakers today. I went to start another playlist and when I tried, the apple appeared on the screen. I attempted to reset, using hold/toggle a few times, then menu and play/select-
    that's when I get an ipod with a sad face and www.apple/support.com. What's going on. Can someone help me with this issue?

    Also, there is a pretty comprehensive post written by another forum member which is about the sad iPod icon or the folder and ! icon. Be aware that it's quite involved and contains some info that will almost certainly void the warranty. If your iPod is still within the warranty period, you should use that option first.
    The Sad iPod/folder and ! icon.
    You can arrange online service here.
    Service request.

  • Please help. Keep getting Spinning Rainbow Wheel

    Can anyone help please I keep getting this when ever I open a new tab in a browser or whenever I do "anything", the little wheel comes up for about 2-3 seconds, even when typing this right now it's happened.  Even if i decide to open a new application it starts up.
    I have
    Intel i7 Quad
    1TB Harddrive
    4GB Ram
    27" iMac (2010)
    1 GB Nvidia Graphics
    Now the system has run fine since I had it, now that the apple care has run out it's decided to play up, I've been using apple for 10 years mostly because it's hassle free but this is seriously annoying.  I can't do anything?
    I tried playing several games too; World of Warcraft, same thing keeps stuttering with wheel.  Same with Starcraft.
    I've never had any problems before, ever.  Been able to play and multitask sometimes without even the slightest problem.
    Now I can't even type this query without the wheel happening.
    Things I've done to stop it:
    -lowered graphics on games
    -restarted/shutdown
    -opened in safe mode
    -run a disk repair
    Nothing is working, it's really disheartening, and frustrating.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Please help me. i get the following error " error getting license, server communication problem, E_ADEPT_DOCUMENT_TOO_SHORT

    HI,
    I am using this for the first time. I have downloaded a Adobe E-book from my library. I installed Digital Edition 4 and i keep on getting this message when i try to get the book from my pc downloads. Please help me overcome this issue
    regards,
    kapil desai

    Please try de-authorizing and authorizing again.
    Steps to De-authorize
    1) Switch to Library Mode by clicking Library button
    2) Select menu item Help--> Erase Authorization or Press Ctrl+Shift+D
    3) Click Erase button to De-authorize
    Steps to Authorize
    1) Launch ADE
    2) Switch to Library Mode by clicking Library button (if you are in Reading Mode)
    3) Select menu item Help-->Authorize Computer or Press Ctrl+Shift+U
    4) Enter the valid credential to Authorize
    Hope this solves your problem.

  • Please Help: I cannot get the Airport Extreme settings right with AT&T DSL

    AT&T Motorola 2210 DSL Modem.
    I have tried both bridged on/off and different configurations on the Airport Extreme, but I cannot get online. I am out of ideas. I called AT&T tech support and because it's not one of their wireless routers, they wanted to charge me to troubleshoot, ridiculous.
    Please help

    If you find that the Double NAT setting will not allow the PS3 to connect correctly, your only other option is to change the configuration of the modem to either +PPP on the computer+ or +Bridge Mode+ and then configure the PPPoe service on the AirPort Extreme.
    I assume that you have already set the modem up using the default IP address of 192.1681.254 (I think this is it). You'll need to locate the page to change the settings and it will probably have a red warning sign on it. Either PPP on the computer or Bridge Mode will work. Update to save settings.
    Then under the Internet icon in AirPort Utility:
    Connect Using = PPPoE
    enter your user name (probably your email address with the service provider)
    enter your password
    Leave the Service Name area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings.
    That will eliminate the Double NAT issue and the PS3 should get a clear indication. As I said, when you have the PPP connection on a device other than the modem, you may see an occasional drop and restart of your connection. That seems to be a fact of life with this type of setup.

  • Please help! Keep getting error message "an internal error occurred"

    Hello,
    I'm trying to install Adobe Reader 10.1 on my macbook, but after (what looks like a successful download of Reader), when I try to open up a pdf I get the message "an internal error occurred." From here I am forced to click "OK" and then I just get a blank screen.
    I've tried to unistall and reinstall all Adobe files several times, but always get the same error message.
    Here's what I'm working with:
    Mac OS X - Version 10.5.8
    Intel Core 2 Duo
    Safari - Version 5.0.6
    I'm not super-tech savvy, I just need to download this program to be able to use an online training module for school.
    Thanks.

    Hello,
    I have had the same problem and ended up spending about 4 working hours resolving it, although I have a master degree in computer science.
    The problem is caused by an incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10. It is very strange that this error was not discovered during Adobes in-house quality control. I expect such tests should have been performed prior to making new releases, in order to spare problems for users. Also, I would expect better error management in a software product of this calibre. If a missing file ends up causing a crash, one might wonder if there are also security critical flaws in the software related to e.g. parsing PDF documents.
    Problem description:
    After agreeing to the license Adobe Acrobat says "An internal error occurred" and crashes. No further information given.
    The system log reads ([…].com.adobe.Reader[220]) Exited abnormally: Interrupt
    Executing the binary directly from the terminal with -O flag gives no data on standard output. Other crash log reveals no interesting information.
    Solution:
    After some investigation, found crash is caused when /Users/[username]/Library/Application Support/Adobe/Fonts/AdobeFnt06.lst is accessed.
    Hence due to incompatibility between Adobe Acrobat Reader 6.0/7.0 and Adobe Acrobat Reader 10.
    The installer/uninstaller should probably have removed the file.
    I could delete the above file since I no longer use v6.0/7.0, and the problem was then resolved.
    Prior to this I had also deleted some of the com.adobe.* preferences from
    /Users/[username]/Library/Preferences
    /Library/Preferences
    etc.
    although I am not sure if this was necessary.
    Hope this helps.
    /Martin

  • Please help, I keep getting an error code 45054 when I try to download an app?

    I keep getting an error code 45054 when I try to download an app on my Macbook air.

    Follow the instructions in this support article.

  • Please help - Unable to get the cluster database home page

    I have both the RACDB1 & RACDB2 instances running (and the 2 listeners also) . But I do not get the the cluster database home page. Instead I get startup/shutdown page. EM later confirms both instances are up.
    But how do I connect to the RACDB database to perform any admin work from within EM ?
    Any help is appreciated.
    Thank you.

    Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
    var myPDFFile = File.openDialog("Choose a PDF File");
    myPDFFile.execute();
    Then check the lower left bottom -- it should display the page size.
    Why not first place the file and then check its size? You can always move it to the right position after placing.
    Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

  • Please help, i cannot get the CD out of the drive! thanks

    I was adding music to iTunes with some CDs, I am not able to get the CD out now, the eject selection is grayed out so i am not able to use it.....how do i get the CD out?!!

    Quit iTunes. Then you can drag the CD icon to the Trash.

Maybe you are looking for

  • Aperture 3..1.3 and Lion - progress, or lack of it.

    Here's what I've found. Others may want to see if their experience is the same if not already tried. I installed Lion and the new Aperture upgrade two days ago. Nothing has worked properly since. Yesterday, I could not open the latest upgrade of Aper

  • Boot Camp and Windows 7

    I know this has probably been asked, but the search results are all about some newer systems and compatibility issues... My XP Boot Camp is now officially screwed up beyond any reasonable hope of recovery. I was going to wipe BC and go with Windows 7

  • Bursting Java API throws an error javax.mail.internet.ParseException

    Hi, I am using the BurstingProcessorEngine API call send emails to the employees of an organization. When i used the bursting file with the paramter of attachments to false, the email goes through. When i change the attachment parameter to yes in the

  • So slow it's unusable

    Initially only the startup was slow and following pages brisk. Now all pages appear only after minutes. I tried removing and reinstalling. Is there any fix? Sony RB60G   Windows XP   SP2

  • The elapsed time problem !!

    Hi ! am working on a program that calculates the elapsed time (for the needle of the gauge to reach a value which is previousely defined) also the elapsed time while the needle is maintained at the same value, which means there are two time counters,