PLEASE , HELP!!!! I THINK THAT MY MAC IS BROKEN!!
Hi, i'm Massimiliano. Last october i bought a macbook pro. Now his battery is really small.(sorry for errors , but i'm italian and i'm 14). After 4 or 5 minutes become really hot in the left zone, near the microphone. Please, what should i do????
It still has the active warranty, so I recommend taking it to an Apple Store.
Similar Messages
-
i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.
ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium -
Please Help: I just purchased a Mac Air and my password will not work ro get into it: Im lost with what to do I set the password as ACDC and it simply wont. I would really appreciate some advice
How to change the password on LIon.
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
Captfred -
I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc. -
I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron -
HT204088 Please help i have reformatted my mac
Please help i have reformatted my mac and was advised in the store that all my purchases are backed up and i can redownload which i can not see how to do, after going back in the store i have now been advised that i have to repurchase my films which is extremly dissapointed as i have spent nearly £100 on films. please help. I have now purchased a hard drive and use time machine but deeply dissapointed.
i can redownload which i can not see how to do
Downloading past purchases from the App Store, iBookstore, and iTunes Store
"Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later." -
icalentor and ilife keep asking me about the keychain password ,wich i don't event know about (login password dosn't work), if any one knows about this ,and how to avoid from that ? thank you ! please help ,.i am a new mac user .
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544 -
HT3606 please help me to upgrade my mac osx 10.5.8 to mountain lion
please help me to upgrade my mac osx 10.5.8 to mountain lion. i am not able to do it.becoz i am not having app store.
Before you buy anything, first make sure your Mac is compatible.
Minimum specs for Snow Leopard. Mac OS X v10.6 Snow Leopard - Read the Technical Specifications
Note. You can no longer buy Snow Leopard from an Apple retail store, only as follows.
If you are in North America ... Last I read, you must call them (1-800-MY-APPLE). It is $29 plus tax for family pack and $19 plus tax for the individual use version.
In Europe or otherwise … call your National Apple Helpline … http://support.apple.com/kb/HE57
Once you have bought and upgraded you will need to apply the Combo updater for Snow Leopard. Mac OS X 10.6.8 Update Combo v1.1
For Mountain Lion the minimum specs are … technical specifications.
But if your computer meets those specs you can upgrade to Mountain Lion without any intermediate steps. -
hi, i need ur help. i got my ipad from my school and they formatted it so that many things would not work, one of those things was iCloud, could any of you please help me undo that?
Check the settings on your iPad:
1. "Settings > General > Restrictions"
and also
2. "Settings > General > Accessibility" here Learning/Guided Access -
why i cant install adobe creative cloud - i try to download afew time's when i start the install its turns off..please help me fix that i wanna try AI
when its go to downloading Creative cloud to des its go downhttp://prntscr.com/4iaboa
http://prntscr.com/4iabrvx
anyone can help me please? -
I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro
Try the Boot Camp Assistant when you are in OS X and download those and follow the directions in BCA utility.
Then look up the Boot Camp forum. I suspect you thought this was MBP related forum, it is for 65 lb tower model (and well the new "nMP Late 2013 Mac Pro" http://www.apple.com/support/macpro/
Boot Camp
There is a support page too
http://www.apple.com/support/bootcamp -
Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.
How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie -
URGENT PLEASE HELP! Think I broke my eeprom
Hi there,
after getting a good manual for setting up a RAID-1 on my Netra, I broke something.
I set two new devaliases for the existing hdds. like the manual said.
After rebooting, it said Can't find boot device.
It went to the ok Promt, there I tried a devunset, followed by a reset-all.
Now, it won't boot, I always reach a
Boot device: disk File and args:
Fast Data Access MMU Miss
ok
That's it.
Please help me out.
The system is a Netra X1,
here's printenv:
Variable Name Value Default Value
ras-shutdown-enabled? false false
shutdown-temp 75 75
warning-temp 70 70
env-monitor disabled disabled
diag-passes 1 1
diag-continue? 0 0
diag-targets 0 0
diag-verbosity 0 0
keyboard-click? false false
keymap
scsi-initiator-id 7 7
#power-cycles 98 No default
system-board-serial# No default
system-board-date No default
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pci-probe-list 7,3,c,5,a,d 7,3,c,5,a,d
mfg-mode off off
diag-level max max
fcode-debug? false false
output-device ttya ttya
input-device ttya ttya
load-base 16384 16384
auto-boot-retry? false false
boot-command boot boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk net disk net
local-mac-address? false false
net-timeout 0 0
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none No default
security-password No default
security-#badlogins 0 No default
oem-logo No default
oem-logo? false false
oem-banner No default
oem-banner? false false
hardware-revision No default
last-hardware-update No default
diag-switch? false false
and devalias:
rtc /pci@1f,0/isa@7/rtc@0,70
usb /pci@1f,0/usb@a
flash /pci@1f,0/isa@7/flashprom@1f,0
lom /pci@1f,0/isa@7/SUNW,lomh@0,8010
i2c-nvram /pci@1f,0/pmu@3/i2c@0,0/i2c-nvram@0,aa
net1 /pci@1f,0/ethernet@5
dload1 /pci@1f,0/ethernet@5:,
dload /pci@1f,0/ethernet@c:,
net0 /pci@1f,0/ethernet@c
net /pci@1f,0/ethernet@c
cdrom /pci@1f,0/ide@d/cdrom@2,0:f
disk /pci@1f,0/ide@d/disk@0,0
disk3 /pci@1f,0/ide@d/disk@3,0
disk2 /pci@1f,0/ide@d/disk@2,0
disk1 /pci@1f,0/ide@d/disk@1,0
disk0 /pci@1f,0/ide@d/disk@0,0
ide /pci@1f,0/ide@d
floppy /pci@1f,0/isa@7/dma/floppy
ttyb /pci@1f,0/isa@7/serial@0,2e8
ttya /pci@1f,0/isa@7/serial@0,3f8
Thank you very much!
Best regards
ThorstenCouple of things to try. Can you boot off the net or CD/DVD ? I noticed that you have disk and disk0 to be same. You mention that you mirrored root. Do you know what the other disk was ? If so you can try booting the other disk.
ok> boot disk1 -
Please help out a very new mac user!
So I haven't used this laptop in awhile been overseas. Never really did get my head around it anyway(A bit dumb when it comes to computers).
Ok I am currently on dial-up with TPG till ADSL goes through next week. I am using V10.2.8.
Now
#1
I want to wipe the hard disk, clear everything(My little bro
has been using it and it's all out of wack and littered with **** stuff) I have 2.56GB free and have used 37.25 GB.
#2
I want to update it with the latest operating software. I was trying to do it before but besides it taken so slow, I thought I read somewhere that I needed 10.3.?.
#3
Also how do I have an email account with mac? Is that through ".Mac" and hence I have to pay for it?
I am about to use about macs everyday and want to get very serious about it but please dumb it down for me and help me out.
Thanks, any advice appreciated
LUKEWelcome To Discussions LambLoinChops!
If there is any data on the Mac, that you wish to retain, be sure to back it up before upgrading!
And some additional info.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.8 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Panther, is no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
A Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, FastMac, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Panther is only on CDs, not DVDs.
Additional info in these links.
Using OS X Install CDs/DVDs On Multiple Macs
What's A Computer Specific Mac OS X Release
Software Update, Upgrade: What's The Difference?
Before upgrading to any OS X version, check to see if your Mac needs a Firmware Update.
If one is required, you must start the computer from a Mac OS 8 or Mac OS 9 System Folder on the computer's hard disk, not from a CD, in order to install it.
As Jaguar 10.2.x is installed, this has already been done.
Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the PPC 10.4.8 Combo Update.
Panther System Requirements
Additional Panther System Requirements
Tiger System Requirements
Mac Model Compatibility & Requirements For OS X
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The Order Form Here. Media Exchange Program
Shop Carefully, Examine All Documentation, And Good Luck!
ali b -
Please Help! Cases that fit on the 2G still fit on the new touch??
Sorry this isn't a using iPod touch question but i couldn't find another forum so please help! Do the cases that fit on the iPod touch 2nd generation fit on the new 3rd generation? Because I am considering buying a case for my iPod touch 3G that i just ordered. So please HELP! Thank-u!
All the physical dimensions are identical to the 2nd generation.
Maybe you are looking for
-
ITunes doesn't sync any of my apple products and ONLY CDs are not appearing on iMac
This has been happening for a while now and I haven't been able to sync my iPhone to my iMac and that applies to my iPod too. Anybody know a way to Fix this because I really need to sync them. Also NO CDs are appearing on the mac or on iTunes but DVd
-
Need information about TM 8.0
Hi all, I'm a MM consultant and currently workin on a project with a requirement like this: The company need spareparts to produce their product and they using MRP to make plan their needs. after they determine the spareparts need they will plan the
-
Forms 6i Client Server works in Win7 64 bits but Runtime (Ctrl-R) not
My installation of Oracle Forms 6i Designer works fine, but within the Designer the Runtime option (Ctrl-R) simply nothing happens. In Task Manager there is a process "ifdbg60.exe" but not the corresponding screen opens. If I run the Runform directly
-
Avoiding 100% CPU Usage
Hi, I don't know too much about concurrency but I thought I had the general idea (obviously not) so I would appreciate it if someone could point me in the right direction here. I have a program with a class called Client, which has a Queue of Events
-
Images and textboxes missing when printing from Word
I have a large Word 2010 (*.docx) file (a developing chemistry textbook) that has many images and textboxes. Some are in-line, some are floating. Everything looks fine on the screen and print preview. However, when I print to Adobe Acrobat, some of t