Please Help! I've got a WRT54GX2 that I used for 2 year...

Please Help!
I've got a WRT54GX2 that I used for 2 years with no problems.
I recently tried to set up network with different IP DSL (Bellsouth).
The problem is the computer can not "locate" wireless router. Is this due to the Westell modem not being "bridged".

***Note: Make sure that the modem is Bridged and the router is set-up to the Instructions I first gave you. If you still have the issue then follow the below steps. At this point you should find out what is your,
IP Address =
Default Gateway =
Subnet mask =
and provide us with that information.
You can get this info by clicking on Start>>Run>>type "cmd">>click ok, now a black command prompt box will open, type in ipconfig /all
You should see an IP address and default gateway of 192.168.x.xxx
you should see a subnet mask of 255.255.255.0
At this time you should power cycle your router and then the modem by removing the power cable from the router, then remove the power cable from the modem. Wait about 60 seconds and plug in the modem and them plug in your router. wait till all the lights on the modem and router are back on. try to connect.
If it still does not work and the IP address is not what I stated, then you will need to reset the modem by holding in the reset button on back of the router for 30 seconds, this will bring the router back to the factory defaults and will remove any prior settings.
Good Luck,
Ttech
Message Edited by Ttech on 06-30-2008 05:38 AM

Similar Messages

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

I have two iCloud accounts, my original one that I used for iTunes years ago which has all my content, apps etc and a mobile me one which I got when I set mobile me up which has all my settings etc, this is causing problems, can I merge them?

As I said I have two iCloud accounts, both do different things, i.e. my original iTunes account has all my app's and music etc, and then also the account which was set up for me when I set up a 'mobile me' account has all my calendars, contacts, settings etc, how can I merge these or even easily set my settings etc to go to my older iTunes account, I have tried to set up family sharing and all I can share is my calendars not my apps because they are with another iTunes account.
I am also a little concerned that my fire vault has just set its self up using the mobile me account, if I was to get rid of an account I imagine this would be the easiest one to ditch then what would happen to all my encrypted data?
Many thanks for your help.
NIK

I am logged into the same things on both my iPhone and my MacBook Pro, except for mail. I use a gmail IMAP account and everything there already works on both machines. The iCloud account on my iPhone uses one Apple ID and the one on the Mac uses the second Apple ID.

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Please help me load an .flv video that has been embeded onto a web page

Hello there,
I was hoping someone on this forum could please help me with one specific problem that I am having. I would like to embed the a flash player into an html page, and load the video from a service that has the streaming video provided.
This is the context of the situation...
We have created a site that was to be used on a showroom floor (no internet connection) and loaded the .flv videos at the local root level for the site.
Now however, we would like it to be an online site. I have been able to use the flash "jw player"to load videos to play using the shadowbox javascript, but when I try to embed it onto a page and have it play, it isn't working and I am not sure why.
Below is the code that is currently working to load the videos on the local root level.
Might someone have any ideas on what I need to replace to have it load the videos from the streaming service?
I would greatly appreciate any assistance that could be provided. I can also provide a URL if it would help.
I would GREATLY appreciate any assistance provided.
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("player1","9.0.98","expressInstall.swf");
</script>
<object id="player1" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" name="player" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<object type="application/x-shockwave-flash" data="player.swf" width="640" height="380">
<param name="movie" value="player.swf" />
<param name="allowfullscreen" value="true" />
<param name="allowscriptaccess" value="always" />
<param name="flashvars" value="file=assets/videos/Bob_Peebler.flv&image=images/videoStatic_Peebler.jpg" />
<p><a href="http://get.adobe.com/flashplayer">Get Flash</a> to see this player.</p>
</object>
</object>

Hello,
Thanks a lot for the reply. However, I am pretty confident that the jw player supports the streaming video option, but as I mentioned that I was able to use it as a popup using the shadowbox javascript before. After doing a bit of investigating on how the videos are hosted, I am using "progressive download" method for these videos.
I think the problem is that the player.swf is hosted on my website server - and the videos are then hosted on the media hosting service. I think that the player needs to be located on the media hosting service, and then embedded onto the page along with where to point to the .flv video. Does that sound right?
If so, the paramater I am using to embed the player as I mentioned in my original post is simply:
<param name="movie" value="player.swf" />
does the "value" then have to change to the http:// address for the video player.swf that would then be hosted on my video hosting service?
Little help?
Please let me know if there is anything I can provide to clarify the issue.
Thanks
M

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my pass fail

Hi, please help me , i get notification about a new update for my iPad when I do the instal for the new version it is asking me for a passcode but which passcode may I have to enter? Because when I enter my gmail passcode it is call me that my passcode is failed

The passcode you need to enter is the passcode you set on your device. It is the passcode that you enter when you turn on your iPad or awaken it from sleep after and Auto lock.
If you do not know or remember your password and did not store it somewhere then you will have to restore your device.
http://support.apple.com/kb/HT1212

I have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me

i have a really really big problem to my iphone icloud please help me i could send you my birth certificate for confirmation that im the real user please help me apple.corp and please tell me if this is not possible to be done it almost a month that i cant use my iphone.
thank you for those who read this
<Email Edited by Host>

Remove your email address. This is a public website, and you are addressing thousands of strangers.
After doing that, tell us what your issue actually is. This is a user-to-user technical forum. You are not addressing Apple here.

I recently got my new iPhone and logged into my Apple ID that I use for my iPad and when I go to buy an app Which costs it asks me security questions I never set.. Help!

I recently got my new iPhone and logged into my Apple ID that I use for my iPad and when I go to buy an app Which costs it asks me security questions I never set.. Help!

Read here:
http://support.apple.com/kb/ht5312
If nothing works, either:
Go here, ask for assistance:
https://getsupport.apple.com/GetproductgroupList.action
Or, call AppleCare & ask for "Account Security".

HT4759 Please help me. My Apple id not be used in iCloud. After sign in, to iCloud, I have error massage: This Apple ID cannot be used to sign in to iCloud. Create a new Apple ID or sign in with a different one.

Please help me. My Apple id not be used in iCloud. After sign in, to iCloud, I have error massage: This Apple ID cannot be used to sign in to iCloud. Create a new Apple ID or sign in with a different one.

For whatever reasons, the "None" option is not always available to all users and I think it may be related to what country you live in. Short of contacting Apple to get it straightened out, if you haven't done anything with your new ID ye - you can create an Apple ID without a credit card and simply abandon the one that you just created.
This explains how you can creaet an ID without a credit card.
http://support.apple.com/kb/HT2534
The two big things that you have to remember for this to work are ... you have to sign out of your existing Apple ID .... Settings>Store>Apple ID - tap the ID and sign out. Then you have to try to download a free app to bring up the window that asks you to sign in or create an ID. Read the information on the website that I referenced above.
If you have not used the original Apple ID for anything yet, you can simply ignore it and use the new one - or like I said earlier - contact iTunes support and ask them to help you sort it out.
Here is a link to iTunes support. You can change the country in the bottom right corner of the screen.
http://www.apple.com/support/itunes/contact/

Please Help me selecting a SAP module which is suitable for me as i am diverting from other technologies.

Hi All,
I hope someone could help me out in selecting an appropriate in SAP for me.
I have done my B.Tech(Computer science and Engg) and have 3 yrs experience in Development in .net PLATFORM. But currently I am planning to change my career to SAP and so I have done my research in the SAP modules,as per my previous background I could see that BI,HANA, MM, SD, ABAP, BASIC and if something is missing please let me know as the best modules for the long term career and please also help- me in saying the best suitable module requirement and in the future i can have growth.
SO could anyone suggest me which module is best for the career and have good job opportunities in the market to settle down.
Please help me to select the module.
Thank you

Thank you Everyone for helping me diverting into SAP , actually as i have experience in .net technologies in development , please help me in diverting into nor coding part and i am interested into sap consultant .so please help me ...as i am interested going for B.I..
Is SAP BI the correct module for me and is it recommended to get settled in this module and for future also .
Please help me ..
Regards ,
Bharat.

Could someone please help me, I bought my daughter an iphone 4s for my daughters birthday yesterday and set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too,

Could someone please help me, I bought my daughter an iphone 4s for her birthday yesterday and I set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too, very annoying for us both.

you can use the same apple id for purchasing apps and music if you want, but turn off automatic downloads. it may be better to have separate ones, but if you want the same app you'd have to pay twice. that's something you'll have to think about. for all the other stuff like facetime and messages and icloud you need to have separate icloud id's. see the apple link below.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

When trying to verify the email address, I get the following message. Please help. This email address is already in use or you may already have an Apple ID associated with this email address. Please try again or sign in using your existing Apple ID.

Me too. I try to verify and i get the same message.
I've created 3 alternate e-mail addresses and tried creating new accounts.
Same Result!
This is bullsh!t. How the **** can all 4 of my attempts result in the same freakin error???

Hi, please help me. Bought lightroom license but was using the free and the mode of revelation is still blocked, already desistalei and installed again on my PC but the revelation mode remains disabled. What should I do? Tks

Hi, please help me. Bought lightroom license but was using the free and the mode of revelation is still blocked, already desistalei and installed again on my PC but the revelation mode remains disabled. What should I do? Tks

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Please Help! I've got a WRT54GX2 that I used for 2 year...

Similar Messages

Maybe you are looking for