Please Help.... IEEE 1394
Just brought an IPOD nano ma4777zt/a (don't understand 2nd generation / click wheel ?)
and my PC runs Windows XP home Edition
loaded itunes onto my computer by clicking download on web site Itunes 7
Once complete connected ipod via cable and I've got the message
"No IEEE 1394 Host controller found"
Searched for 8 hours & nothing seems to have worked
Please help !!!!
Carefully check the bottom dock connector for any bent over pins or something in there shorting pins together. A magnifying glass would be a help.
The Firewire data pins on the dock connector are right next to some power pins and if you get a short between them, it can fool the iPod into thinking there is data coming in on the Firewire pins and it will give you Firewire related error messages.
For that matter, be sure to carefully check the Dock end of the USB cable for the same sort of problems. It would be help if you can find, beg, borrow, another USB cable, even if you just go to a local electronics store that sells iPods and see if you can test your iPod with one of their cables. Obviously if it doesn't give you the message on a different cable, then your cable is the issue. If you still get the message, then likely it is your iPod itself.
Patrick
Similar Messages
-
Help : IEEE 1394 failed to work in W2K (code 10 error)
Hi all,
My KT4 Ultra FISR c/w IEEE 1394 and been trying to get it work under Win2K & XP. So far managed to get USB 2.0 working under Win2K but IEEE 1394 always failed with code 10 error in 'hardware manager'.
Anybody got experienced before ?the domains have to "trust" each other. Make sure to follow the instructions about the "enabled generated credential" in the following doc:
http://edocs.bea.com/wls/docs81/ConsoleHelp/messaging_bridge.html#1122172 -
I updated to the ilife 11 with the disk i got when i bought my imac. everything was going fine until one day few weeks ago loaded it up, now in the projects list most of them don't say edit or allow you to, when you can get into them the display video shows and burns the wrong video, without sound, the video event section doesn't play sound, so altogether completely goosed, please someone help, i started moving all my other files to an external to free up some room, it did change a few things, at one point my project started playing the correct sounds etc, but doesn't now... please help
No IEEE 1394 Host Controller found.
When running iPod diagnostics from iTunes, that message merely indicates that your iPod has no firewire controller. Since the iPod 5th gen has none it's not surprising you see it, and it will always be displayed even if your iPod were working correctly. Ignore it, it's not relevant.
You don't appear to have gone through any of these articles.
Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Windows confuses iPod with network drive
And also, the info contained in this post. -
Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?
I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.1.7
QuickTime not available
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0013AC2C0E8DEF50
Current user is an administrator.
The current local date and time is 2012-06-12 20:13:12.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Tue Jun 12 19:48:36 2012
Lease Expires: Wed Jun 13 07:48:36 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Well, you do not mention what computer OS you are using, so here are the support documents for both.
Windows: http://support.apple.com/kb/TS1538
OS X: http://support.apple.com/kb/TS1591 -
Ipod not found - will not sync; restored and lost everything. Please help.
To whom it may concern,
My iPod Classic has worked perfectly for the few years I've had it. I only use it a few times a month on average so it's still in really nice shape.
Earlier today, I went to sync it like I do every couple of weeks whenever I add new songs, and something strange occurred. At first, it seems to say "Syncronizing..." but quickly stops and displays the "Connected" status instead - not long enough to sync even one song.
Sure enough, I checked it and it had not updated.
After using the "Run Diagnostics" option, it tells me "Device Sync Tests Results: No iPod touch, iPhone or iPad found."
Yet - under "Device Connectivity Tests", it does say "iPod Found" and it shows up as a device in my iTunes - but not in my Devices (under Preferences).
I followed every step in the troubleshooting guide that iTunes directed me to, each with the same results. As a last resort, I used a Factory Restore, which was what the website told me to do.
To my horror, the problem STILL persists - and I just cleared out not only all of my songs, but photos that were very important to me that I only had on my ipod. I even tried to do a backup first, but my device would not show up under the "Preferences/Devices" category, I could not even save them before I restored it.
Now I am stuck with an ipod that will not sync with my itunes library, and an ipod that has absolutely nothing on it. At least before I restored it, it had all of my old music and photos on it.
This is very frustrating and upsetting. If there is anything that might be able to be done, please help - and please, do not send me back to the same webpage - I already tried everything there at least twice now.
I also borrowed a different cable to make sure it wasn't my adapter, and there was no difference.
To make matters worse, as I am trying to find someone to assist me, I received this message after entering my serial number;
"It looks like your product is not covered for complimentary technical support, so you may need to purchase a single incident of support."
This iPod already cost me $250.00 and that was steep in and of itself. I really do not feel that it would be fair to have to pay even more just to get some help when it malfunctions.
If absolutely anything can be done, please help me. I would be very grateful.
Thank you in advance for any assistance.
P.S.- This is a copy of the error message I received;
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
ASUSTeK COMPUTER INC. X202EV
iTunes 11.1.3.8
QuickTime 7.7.4
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 007DB9C80C439708
Current user is not an administrator.
The current local date and time is 2013-11-28 22:05:46.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: e38663b94f826b3f535ae2a59ada9fea
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F0006950-D07F-4649-AD41-A38C48C0B9DA}
Description: Microsoft Wi-Fi Direct Virtual Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {4CD83EC0-97FE-4E11-9DC2-0A1A28338772}
Description: Qualcomm Atheros AR8162/8166/8168 PCI-E Fast Ethernet Controller (NDIS 6.30)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 16:00:00 1969
Lease Expires: Wed Dec 31 16:00:00 1969
DNS Servers:
Adapter Name: {C6056BBC-55CD-40AC-85EA-86167FEDB5D0}
Description: Qualcomm Atheros AR9485 Wireless Network Adapter
IP Address: 192.168.1.112
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Nov 28 21:26:04 2013
Lease Expires: Fri Nov 29 21:26:04 2013
DNS Servers: 192.168.7.254
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-11-28 22:05:29.
**** Device Connectivity Tests ****
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
FLUKE (E:\), iPod classic running firmware version 2.0.1
Serial Number: 8N837N2A2C7
Bus Speed: 61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar! -
Please help [Realtek LAN NIC problem]
Hi everyone, this might be a long post but PLEASE read it if you have the time, you might just know the solution to this problem. to begin with, here is my system:
Windows 2000 pro sp4
AMD Athlon64 3000+
MSI K8T Neo (BIOS rev. 1.10)
1 GB (2x512) PC3500 Mushkin level 2 hi performance @ 2-3-2-6 timings
Samsung SATA 160 GB hard drive
ATI Radeon 9700 pro (catalyst 4.1)
Lite On 52x-32x-52x IDE CD Drive
Enermax EG465P-VE FC (460W) 3.3V/35A , 5V/35A , 12V/33A
*There are not any other PCI cards installed.
Now, here is the problem:
I did not notice the problem right away, you will not notice this if you are doing normal browsing or downloads. It came to my attention while I was receiving a file on IRC (using mIRC). while I was recieving the file I noticed that, somehow, I could no longer access the internet at all (neither on IRC, http, ftp .. nothing). I tried to find out why, I couldn't. so I rebooted the system and tried to continue receiving that file ... same thing happens. after a while of digging around my system and experimenting I found that sends from certain people will cause the problem, and i simply need to restart to get back online. this will happen always whenever those certain people send me anything. so, what's going on:
1 - Windows 2000 pro is freshly installed and up to date. i tried XP, it had the same problem; however, 2000pro is the operating system i will be using.
2 - the client is not the problem because i tried another one and the same thing happened. I have also tested 2 other computers and they worked fine (same file .. same person). note that the download was going faster on the other 2 computers.
3 - it is not the router because a direct link to the modem did not solve the problem. also, the other 2 computers had no problem with the router.
4 - i tested the Realtek driver that was included on the motherboard CD as well as the updated drivers from realtek website. that also did not help.
5 - windows reports that the device (realtek NIC adapter) is working properly and that there are no conflicts. realtek diagnostics utility also reports no problems.
6 - Realtek's Gigabit NIC shares IRQ 16 with the radeon 9700 pro, so I figured that i could reserve some of main memory to IRQ 16 to make sure things run with maximum stability:
on system.ini added the line -> IRQ[16] = 8192 (reserve 8MB of main memory for IRQ 16). this did not help. so i removed it.
7 - changing the NIC setting from "auto negotiation" to "100Mbps/Full duplex" did not help either.
8 - one time, the Realtek diagnostics utility was able to reload the device driver, and of course, i was able to go online without restarting. this happened only once. note that I tried to unload/reload the device through device manager many times but i always failed and then i have to press the power switch or reset button to actually reboot. normal windows shutdown/reboot is not possible. the same thing happens when Realtek's diagnostics finishes a test and tries to reload the driver (remember, it only succeeded once).
9 - system logs do not seem to report any problem. i even tried using inspectr.exe to try and find the reason for the driver crash but no crash was detected.
10- disabling the IEEE 1394 controller did not help.
it is obvious that there is something wrong with the driver, but there is a possibility it could be the board/device. if the driver is "flakey", it will mess up. if the device/chip/board is not working properly, then the driver will get stuck just as well.
so, the solution?
I- Hit the wall with my head 7 times (2-3-2) then roll on the ground for a few minutes .. get up and hit the wall 13 more times (2-3-2-6) and then roll on the ground and sleep.
or
II- burn it all .. yes ... BURN IT ALL. MOAHAHAHAHAH!!!
or
III- RMA board or change it :(
I'm trying to decide whether it is the board or if it is the driver. I'm trying to find any excuse not to RMA or change the board. I will be installing linux, and networking is important to get rest of the files I need. I really would like not to rely on flakey hardware or driver. if it is the chip, i have to RMA. if it is the driver, change MB or get a NIC card and install it until realtek decides that it is a good idea to fix the driver.
i tried to check realtek's website but there was very little or no real helpful information to the end user (either that, or i was too upset to find the info i need on their website). I wish they had a forum like this one.
That is basically what i was thinking about .. of course, i could be wrong and the solution might be simple (i wish).
any suggestions, tweaks, patches, information that you guys know about are appreciated and may be of great help. Are there any setting in the BIOS that i need to set in some way to make sure this works properly? would the new BIOS revision 1.20 fix this?
I apologize for the lengthy post. I believe that I've managed to fry whatever brain cells I had left over the past few days. So, I apologize for any spelling/grammer mistakes
thank you in advanceBlaming every problem on the MSI K8T NEO FSR on a 350w power source is utter crap!
Why would ANY Computer hardware shops even SELL SYSTEMS on a 350w powersource on the thousands if a 350watt power source wouldnt be enough for the motherboard, what you are saying that hundreds of HW stores are just saying FU to every customer they sell a computer unit WHICH COMES PRE-EQUIPPED with a 350W powersource!!! I've seen various configurations using a 350w power source working just fine!
I simply DO NOT believe that the system aint getting enough power, that's bull! This would cause considerable UNSTABILITIES and other problems on the system besides dysfunctional S-ATA Hard drives and NIC problems, eg. like artifacts while playing games, crackling in audio, bluescreens and other symptoms!
I just noticed today that my on board NIC had jammed while downloading Torrent files, had to reboot my cable modem, this could be nothing and could simply be an ISP matter, or it could be that my K8T NEO FSR also has a problem with the NIC, again i stress that i havent done really any testing so this raving could be about nothing.
I solved my S-ATA problem by changing back to a similiar IDE 8MB cache 7200 rpm Samsung 160 GB drive. No problems what so ever with register / file corruption! I've also been in contact with VIA who are currently investigating problems with the 8237 Southbridge controller equipped motherboards like the K8T NEO FSR (http://www.viaarena.com -> forums) -
I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks
I am attaching the Diagnostics data below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron N7010
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0016AA9C0126E318
Current user is not an administrator.
The current local date and time is 2012-07-05 11:42:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod (5th generation) running firmware version 1.3
Serial Number: 8L643QK9V9R
iPhone 4 (CDMA) running firmware version 5.1.1
Serial Number: C8RG57F0DDP8
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.
-
Ipod in not recognised by windows or itunes. PLEASE HELP!!!!!!!!!!
I have a 5th gen 30gb video ipod which was fine up until the start of january when i tried to connect my ipod to my laptop and it was not recognised by windows as a usb device, i'v been through the device manager and can not find it there. USB port are fine as other things connect, i've tried 3 different usb cables. I've run diagnostics and got the following
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Inspiron 1501
iTunes 7.5.0.20
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Current user is an administrator.
The current local date and time is 2008-01-15 13:16:51.
Video Display Information:
ATI Radeon Xpress 1150
** iPod Connectivity Tests **
iPodService 7.5.0.20 is currently running.
iTunesHelper 7.5.0.20 is currently running.
Apple Mobile Device 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard Enhanced PCI to USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
Standard OpenHCD USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Device Not Currently Connected:
Fifth Generation iPod (iPod with video) running firmware version 1.2.3
Serial Number: 8M6398VKV9K
Can someone please please please help me, i've run the 5 r's, i've tried to put it in to disk mode etc etc and still it will not connect.
it looks like many people are having this problem with the same model.
You can e-mail me direct on [email protected] if easier.Same as, although a new development on this last night, I borrowed a mates USB hub that has it's own mains power supply and for a short time my laptop recognised my IPOD, I obviously thought i had found the solutions as it started to sync at which point the smug smile left my face as i could smell burning plastic. Yep, the usb cable was melting in to the USB hub. so not only won't the sodding thing work properly it is a god **** fire hazard. Luckily our producst that cost hundreds of pounds are supported by friendly and helpful people at Apple!!!!!!!!!!!!
Oh and i downloaded itunes 7.6 last night and nothing.
PLEASE HELP!!!!!!!!!!!! -
I dropped my Ipod (4TH Generation Ipod Nano) I have got it start up again I have put it in disk mode and connected it to Itunes,
I have downloaded the new software through Itunes, that went well, it came up as normal.
I have got it to restore to factory settings. (Although before hand it synced and all that)
During this process it has seized and not done what it was suppose to, only displaying the Apple Symbol.
I disconnected, and it has gone flat and now is telling me to connect it to power, when I do so nothing happens.
It won't connect to itunes.
Please help.
MJHello there pipem90,
Heres an article about that very issue. Check out this article named iPod not recognized in 'My Computer' and in iTunes for Windows found here http://support.apple.com/kb/ts1369.
There is more to the article but start here:
1. Start with the iPod Troubleshooting Assistant
If you have not already done so, try the steps in the iPod Troubleshooting Assistant which applies to your iPod; this will often solve your issue.
If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
All the very best,
Sterling -
2014 Sync problems on iPod classic / Please help!! 2014
Hello community!
I really need some help with this problem I am having... I have done some research for the past few days on my own but nothing I have found has helped.
First some specs on my device...
iPod Classic: 80 GB (I believe this is iPod with video, assumed on the fact that it supports movie syncs)
iPod software version: 1.1.2 (up to date according to iTunes)
Formatted for Windows
Syncing to Dell Inspiron with Windows 7
iTunes updated to current version (11.4)
I had much mof my music library uploaded onto my iPod for quite sometime. (close to 14,000 songs synced at 192 kbps) I often like to put my iPod on shuffle and just listen to whatever comes on, but here and there I will skip songs until something I am in the mood for comes on... I began to notice that my iPod was freezing (ON THE DISPLAY ONLY!!! Playback through speakers continued) when I would skip through songs... Once the screen dimmed however, I could once again skip to the next song. I figured this was a problem concerning corrupted files or something similar. These are the steps I took..
1.) Updated iTunes to version 11.4 and checked for further updates
2.) ATTEMPTED to check disk within Windows (was unsuccessful and heard the iPod making a lot of 'clicking' noises from within the casing)
3.) Performed an iPod restore within iTunes
4.) Performed a check disk within Windows and recovered any bad sectors (SUCCESSFUL)
5.) Selected 'Music' sync and the option for 'Entire music library'
6.) UNCHECKED 'Include music videos'
7.) Reconfigured settings as they were before and made slight changes..
a.) Checked 'Open iTunes when this iPod is connected'
b.) Checked 'Sync only checked songs and videos'
c.) Checked 'Convert higher bit rate songs to '192 kbps' AAC'
d.) Unchecked 'Manually manage music and videos'
e.) Unchecked 'Enable disk use'
8.) Began a sync on my iPod... With well over 10,000 songs I knew this was going to be a lengthy process.. I left computer unattended..
When I returned to my computer, iTunes was unresponsive... The only way I could get iTunes to show was to minimize a Window on top of iTunes. iTunes states 'Syncing iPod... Do not disconnect' but does not show a rolling progress bar.. I cannot cancel sync, I cannot eject iPod, I cannot close iTunes...
I attempt to eject iPod device through windows, UNSUCCESSFUL (Cannot unmount generic volume while the device is in use)
I 'Ctrl+Alt+Dlt' to Task Manager and End Program 'iTunes' UNSUCCESSFUL..
I End Process 'iTunes.exe *32' and eject iPod through Windows SUCCESSFUL
When the iPod displayed 'OK to disconnect with load bar, I disconnected the device.
As soon as this bar was full iPod IMMEDIATELY rebooted completely and powered back up with only 20 songs synced. (Frustration ensues)
Confused and thinking maybe my screen saver caused an interruption during the sync, I changed screen saver and power saving options to eliminate any possible interruption, REPEATED STEPS 3-8 ABOVE, and started sync again.. Left computer unattended
Again, coming back to computer much later, iTunes was in the same unresponsive state. Closed iTunes and began looking for answers on the internet. Any and all answers I found stated I should restore iPod, update iTunes, run diagnostics tests, etc., etc...
All of which I had done EXCEPT for running a diagnostics test..
Running a diagnostics test: I ran only the tests concerned with 'Device Connectivity' and 'Device sync' tests.. Here are the very interesting results I yielded from these tests...
Device Connectivity Test:
Support services:
'iPod support service is running.' Status: GREEN
'iTunes Helper is running.' Status: GREEN
'Apple Mobile Device is running.' Status: GREEN
Ports:
'USB ports verified.' Status: GREEN
'No FireWire (IEEE 1394) ports found.' Status: GREEN
'iPod found.' Status GREEN
ALL TESTS PASSED
Device Sync Tests
Results:
No iPod touch, iPhone, or iPad found. Status: RED
ONE OR MORE TESTS FAILED
I am at a loss, I realize that Apple has discontinued the iPod Classic but does that mean iTunes will no longer support these devices!?
And if ANYONE has ANY suggestions for possible steps I can take to regain syncing privileges to my iPod once again, please let me know!
Also, I have diagnostics test results saved on my desktop and available to post if required!
Thank you for any and all help!
-Chris!UPDATE!
I made several adjustments to my sync options and made some progress and am now trying to sync in 'stages' as I like to think of them.
Here is what I did:
1.) Under 'Music' tab in 'My iPod' options I opted to sync 'Selected playlists, artists, albums, and genres'
2.) Selected a small portion of tunes I know I want on my iPod (ended up being close to 3,500 songs.
3.) Under 'Summary' tab I unchecked the 'Sync only checked songs and videos' box
4.) Unchecked 'Convert higher bit rate songs to ___ AAC'
5.) Checked 'Enable disk use'
6.) Ran a SUCCESSFUL sync!
I am now running a sync keeping the same adjustments in place and have added 6,556 songs. (SYNC IN PROGRESS)
I am wondering if trying to convert that many songs to a lower bit rate is causing sync problems and it appears as if I am at least making progress on this. HOWEVER, I really prefer to decrease the bit rate on my songs so I may fit more on my iPod... Usually most of the files I have in iTunes are at 320 kbps with a select few at 192 kbps. I would like to make everything the way it was before my first iPod restore.. 192 kbps, but this also seems to be the cause of the sync problems I am having? Anyone else have a comment on this?
Thanks again
-Chris -
HT1369 My Ipod account is saying that my ipod is synced to a differnt account, please help.
Hi there.
I have been having trouble with my Ipod nano. It was working great for the first few months, and it was simple to download, and sync songs to it. But it suddenly began to say that my ipod was synced to another account. I have tried to run the diagnostics, and the results are attatched. I did have to connect my ipod to my cousins accont back a few months ago, because we needed the songs for school. Those were the last two songs I purchased. I was able to upload music off CD's after that, then it started giving me this message about my account being synced to another account. I tried syncing it anyway, but it gives me the option to either delete the previous syned information, and I can't do that, because I purchased $50 worth of songs, and I can't loose them. If anyone can help me, Id' be very grateful.
Olivia.
( Here's the Diagnostic tests results. My Ipod was plugged in the whole time.)
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Acer Aspire 7741
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D8AC1C0C3AD258
Current user is not an administrator.
The current local date and time is 2012-07-24 12:51:59.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
The drive F: Novatel Mass Storage Rev 1.00 is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {EFA9F465-07F2-4F59-AD2A-46FBE5317F65}
Description: Verizon Wireless - VZAccess
IP Address: 75.207.43.230
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers: 66.174.71.33
66.174.95.44
Adapter Name: {5DDD3447-D384-4069-9337-524C482C43BE}
Description: Atheros AR5B93 Wireless Network Adapter
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers:
Adapter Name: {379810E1-DDC2-4B05-9656-FD959C2A355C}
Description: Broadcom NetLink (TM) Gigabit Ethernet
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 18:00:00 1969
Lease Expires: Wed Dec 31 18:00:00 1969
DNS Servers:
Active Connection: Verizon Wireless - VZAccess
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-07-24 11:39:51.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
OLIVIA (H:\), iPod nano (6th Generation) running firmware version 1.2
Serial Number: DCYGRS51DCMN
Bus Speed: 61440
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.Please help! It's like I've completly lost my entire account, including the movie I bought.
-
Please help! Will any of these camera's work with VC3 Camera Requirements?
I am looking to do news broadcasts for my website. I was looking into Panasonic GS-500, GOOD CAMERA, discontinued. I don't like the GS320 as it doesn't include a mic or headphone input. So I have no choice but to spendaround a thousand dollars for a 3CCD or CMOS camera that can shoot good broadcast web news segments.
I have narrowed my choice to three camera's that have mic, firewire, essential for VC3 but I can't decide. I don't know if they are compatibile with the software, need help from the experts.
This is requirement from the adobe website:
******What types of cameras can I use with Visual Communicator?*******
Visual Communicator works with standard webcams and camcorders. Most camcorders will require some kind of video input card such as a FireWire (IEEE 1394) card or an analog capture card. Whether you are using a webcam or camcorder, it's important that the camera or input card has a Windows®driver that is DirectShow compatible. Most of them do. If your device is older, you might need to visit the manufacturer's website to download a new driver that is DirectShow compatible. Inside Visual Communicator you will find a menu that lists all of the DirectShow devices attached to your computer, and you can select which one you wish to use for your video input. If you have an analog video capture card, you can also hook up your VCR and use recorded footage.*********
Could you please read the specs and let me know if they will work with VC3:
******JVC - 2.0MP High-Definition Digital Camcorder Model: GZHD3US
http://www.bestbuy.com/site/olspage.jsp?skuId=8464306&productCategoryId=abcat0403004&type= product&tab=2&id=1184768163867#productdetail
******JVC - 2.1MP High-Definition Digital Camcorder
Model: GZHD7US
http://www.bestbuy.com/site/olspage.jsp?skuId=8225066&productCategoryId=abcat0403004&type= product&tab=2&id=1166840341098#productdetail
*******Canon - High-Definition MiniDV Camcorder
Model: HV20
http://www.bestbuy.com/site/olspage.jsp?skuId=8220061&productCategoryId=abcat0403004&type= product&tab=2&id=1166236338024#productdetailyes, change the output settings from HD to DV and it'll works smoothly.
http://LittonDSD.om
http://SoftwarEdge.com
http://TrendsHub.com
http://Patheo.org
http://Quickfit30.com
http://BizNetWorld.com
http://UltraAs.com
http://GenieLab.com
http://ISSSA.org
http://Porkepik.com -
PLEASE HELP.. PROBLEM WITH RESTORE
okey, well i have this huge problem. i got my ipod 2 weeks ago from the US, i live in poland and not many people know how these things work so i ask that someone here can help me..
a week ago.. the ipod froze my computer, i could do nothing with it. so i had to restart it.the problem was that my ipod was connected to the computer still.. but my comp wouldnt start so i had to disconnect the ipod.(yes the DO NOT DISCONNECT icon was on the ipod.. but wut else could i do?)
so my ipod froze then, and i had the apple icon the whole time on the screen, so i tried everything, i get so frustrated with the ipod that i just want to throw it out the window. i read some things about the problem on the suppoort page, i reset it about a hundred times.. and finally it started working when i got it into disc mode. Yes i got all happy.. I press the restore buttons in itunes.. and this is what happens.. the ( i dont know how to call it) scroll bar? well the green bar that moves to show that its 'restoring' it freezes in the middle of the process, i uninstalled itunes 10 times.. i even tried restoring on 2 other computers, on one of them it does the same thing and on the other theres some other problem.
PLEASE HELP ME!! I DONT know what to do.
ipod 5th gen 30gb Windows XP____________________16.06V16, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
Universal Serial Bus Controllers:
Otwarty kontroler hosta PCI do USB SiS 7001, Magistrala PCI 0, urządzenie 2, funkcja 2. Device is working properly.
No IEEE 1394 Host Controller found.
The last connected iPod serial number: ****.
The iPod Service Logging Information:
[SERVICE: 0xB20,22:06:21 INFO] Started C:\Program Files\iPod\bin\iPodService.exe (Mon Nov 20 22:06:21 2006)
[SERVICE: 0xB20,22:06:21 INFO] ##### iPodService starting as a service, version: 7.0.2.16
[SERVICE: 0xB2C,22:06:22 INFO] Timed out... Starting device manager!
[SERVICE: 0xB54,22:06:22 INFO] Listener Window created
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:32 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [InterfaceArrival] \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:34 INFO] device is an iPod
[SERVICE: 0xB54,22:07:34 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:34 INFO] [-1] set waiting to mount = 1
[SERVICE: 0xB54,22:07:34 INFO] [1] Assigning session 0
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_objDeviceNameMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added state machine 1 to m_objDeviceIdMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device number 1 to m_objDeviceNumberMap
[SERVICE: 0xB54,22:07:34 INFO] [1] added device interface "\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}" to m_vctDeviceInterfaces
[SERVICE: 0xB54,22:07:34 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:34 INFO] [1] input #0 from src #0
[SERVICE: 0xB44,22:07:34 INFO] [1] input #0
[SERVICE: 0xB44,22:07:34 INFO] [MACHINE 1 INPUT #0] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:07:34 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:38 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:38 INFO] [1] input #1 from src #0
[SERVICE: 0xB48,22:07:38 INFO] [1] input #1
[SERVICE: 0xB48,22:07:38 INFO] [MACHINE 1 INPUT #1] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:07:38 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED VOLUME ARRIVAL] generating volume mount for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:39 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:39 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\E:
[SERVICE: 0xB54,22:07:39 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\.\D:
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB54,22:07:39 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB54,22:07:39 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB54,22:07:39 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB54,22:07:47 INFO] [VolumeArrive] mask = 0x40
[SERVICE: 0xB54,22:07:47 INFO] looking up device # for \\.\G:
[SERVICE: 0xB54,22:07:47 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB54,22:07:47 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB54,22:07:47 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB54,22:07:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:07:47 INFO] [1] input #2 from src #0
[SERVICE: 0xB4C,22:07:47 INFO] [1] input #2
[SERVICE: 0xB4C,22:07:47 INFO] [MACHINE 1 INPUT #2] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:07:47 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB50,22:07:51 INFO] [First Connect] Creating connect event for device 1
[SERVICE: 0xB50,22:07:51 INFO] [1] set waiting to mount = 1
[SERVICE: 0xB50,22:07:51 INFO] [1] input #3 from src #0
[SERVICE: 0xB44,22:07:51 INFO] [1] input #3
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 INPUT #3] - (HDW) Interface Arrival
[SERVICE: 0xB44,22:07:51 INFO] [1] progress state is 2, Waiting to mount = 1
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [1] progress is now 2
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 TRANSITION] - {Unknown} ==> {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [MACHINE 1 ACTIONS] - {Connected}
[SERVICE: 0xB44,22:07:51 INFO] [1] SCSI Inquiry attempt #0
[SERVICE: 0xB50,22:07:52 INFO] [First Connect] Creating mount event for device 1
[SERVICE: 0xB50,22:07:52 INFO] [VolumeArrive] mask = 0x7D
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\G:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x1
[SERVICE: 0xB50,22:07:52 INFO] iTunes device #1 found with drive letter G, mask 0x40
[SERVICE: 0xB50,22:07:52 INFO] [1] set waiting to mount = 0
[SERVICE: 0xB50,22:07:52 INFO] [1] input #4 from src #0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\F:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x1 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\E:
[SERVICE: 0xB50,22:07:52 INFO] type 0x2 drive 0x0 partition 0xffffffff
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\.\D:
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x0 partition 0x2
[SERVICE: 0xB50,22:07:52 INFO] [SIMULATED INTERFACE ARRIVAL] generating connect event for device 0
[SERVICE: 0xB50,22:07:52 INFO] looking up device # for \\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}
[SERVICE: 0xB50,22:07:52 INFO] type 0x7 drive 0x1 partition 0x0
[SERVICE: 0xB44,22:07:53 INFO] VendorId: Apple
[SERVICE: 0xB44,22:07:53 INFO] ProductId: iPod
[SERVICE: 0xB44,22:07:53 INFO] revision: 1.62
[SERVICE: 0xB44,22:07:53 INFO] vendor bytes:
[SERVICE: 0xB44,22:07:53 INFO] 02 01 00 00 00 00 00 00 00 0B 00 11 91 00 00 00 00 00 00 00
[SERVICE: 0xB44,22:07:53 INFO] [1] firmware version: 1.62 (0x13E)
[SERVICE: 0xB44,22:07:53 INFO] [1] Power State: Powered
[SERVICE: 0xB44,22:07:53 INFO] [1] Checkpoint attempt #0
[SERVICE: 0xB44,22:08:01 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:01 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:01 INFO] [1] serial number 000A270015BEEE43
[SERVICE: 0xB44,22:08:01 INFO] [1] *** CONNECTED - Sending event out, device session 0.
[SERVICE: 0xB44,22:08:01 INFO] [1] input #4
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 INPUT #4] - (HDW) Volume Mount
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 TRANSITION] - {Connected} ==> {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:08:01 INFO] [MACHINE 1 ACTIONS] - {Mounted}
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:01 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:13 ERROR] Did not find first letter of stage
[SERVICE: 0xB44,22:08:13 INFO] got HotPlugState 0
[SERVICE: 0xB44,22:08:17 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB44,22:08:17 INFO] [1] ===== iPod with Video =====
[SERVICE: 0xB44,22:08:17 INFO] [1] progress state is 2, Waiting to mount = 0
[SERVICE: 0xB44,22:08:17 INFO] [1] iPod needs formatting...
[SERVICE: 0xB44,22:08:17 INFO] 22:8:17, year 2006, day of yr. 323, GMT offset 4 isDST 0
[SERVICE: 0xB44,22:08:17 INFO] [1] Perform launch updater check.
[SERVICE: 0xB44,22:08:17 INFO] [1] iTunes located at 'D:\iTunes.exe'
[SERVICE: 0xB44,22:08:17 INFO] [1] progress is now 0
[SERVICE: 0xB44,22:08:17 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
[SERVICE: 0xB34,22:08:57 INFO] <0x4> Got Serial #
[SERVICE: 0xBD0,22:09:01 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:01 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:01 INFO] [1] Progress state is 0, Waiting to disconnect = 0
[SERVICE: 0xD04,22:09:01 INFO] Mounted
[SERVICE: 0xD04,22:09:01 INFO] [1] already mounted!
[SERVICE: 0xD04,22:09:01 INFO] [1] progress state is 0, Waiting to mount = 0
[SERVICE: 0xB34,22:09:03 ERROR] ERROR, mount lock count is 0 but device is not mounted
[SERVICE: 0xBD0,22:09:07 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xBD0,22:09:07 INFO] <0x4> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:16 INFO] <0x1> Got Serial #
[SERVICE: 0xB34,22:09:20 INFO] [1] GetVolumeInformation() failed with error 1005
[SERVICE: 0xB34,22:09:20 INFO] <0x1> GetFormatType() returned unknown format 4
[SERVICE: 0xBD0,22:09:22 INFO] <0x1> Got Serial #
[SERVICE: 0xBD0,22:09:22 INFO] API is now LOCKED!!!
[SERVICE: 0xB54,22:11:15 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:11:15 INFO] [1] input #5 from src #0
[SERVICE: 0xB48,22:11:15 INFO] [1] input #5
[SERVICE: 0xB48,22:11:15 INFO] [MACHINE 1 INPUT #5] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:11:15 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #6 from src #0
[SERVICE: 0xB4C,22:12:22 INFO] [1] input #6
[SERVICE: 0xB54,22:12:22 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:12:22 INFO] [1] input #7 from src #0
[SERVICE: 0xB44,22:12:22 INFO] [1] input #7
[SERVICE: 0xB4C,22:12:22 INFO] [MACHINE 1 INPUT #6] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:12:22 INFO] [MACHINE 1 INPUT #7] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:12:22 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:18:13 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:18:13 INFO] [1] input #8 from src #0
[SERVICE: 0xB48,22:18:13 INFO] [1] input #8
[SERVICE: 0xB48,22:18:13 INFO] [MACHINE 1 INPUT #8] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:18:14 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #9 from src #0
[SERVICE: 0xB4C,22:21:48 INFO] [1] input #9
[SERVICE: 0xB54,22:21:48 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:21:48 INFO] [1] input #10 from src #0
[SERVICE: 0xB44,22:21:48 INFO] [1] input #10
[SERVICE: 0xB4C,22:21:48 INFO] [MACHINE 1 INPUT #9] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:21:48 INFO] [MACHINE 1 INPUT #10] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:21:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:44:23 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:44:23 INFO] [1] input #11 from src #0
[SERVICE: 0xB48,22:44:23 INFO] [1] input #11
[SERVICE: 0xB48,22:44:24 INFO] [MACHINE 1 INPUT #11] - (HDW) CheckDevNode
[SERVICE: 0xB48,22:44:24 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:27 INFO] [VolumeRemoved] existing mask 0x40, arrive mask 0x20
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #12 from src #0
[SERVICE: 0xB4C,22:52:47 INFO] [1] input #12
[SERVICE: 0xB54,22:52:47 INFO] [DevNodesChanged]
[SERVICE: 0xB54,22:52:47 INFO] [1] input #13 from src #0
[SERVICE: 0xB44,22:52:47 INFO] [1] input #13
[SERVICE: 0xB4C,22:52:47 INFO] [MACHINE 1 INPUT #12] - (HDW) CheckDevNode
[SERVICE: 0xB4C,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB44,22:52:48 INFO] [MACHINE 1 INPUT #13] - (HDW) CheckDevNode
[SERVICE: 0xB44,22:52:48 INFO] Connection Detection Status - 0x180600A, device '\\?\usbstor#disk&venapple∏_ipod&rev1.62#000a270015beee43&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}'
[SERVICE: 0xB54,22:52:49 INFO] [VolumeArrive] mask = 0x20
[SERVICE: 0xB54,22:52:49 INFO] looking up device # for \\.\F:
[SERVICE: 0xB54,22:52:49 INFO] type 0x2 drive 0x1 partition 0xffffffff
Windows XP
well i clicked help.. and that didnt do anything either.. ;/ -
W520 Replace DVD with another Hard Drive and IEEE 1394 spec for music recording
To increase the performance, I am taking the 160 GB SSD instead of the mechanical drive. Obviouslt, I need more space than this. I don't care about the DVD rom. It can't play blu ray anyway. Is it possible to replace the dvd drive with a hard drive? Where can I get a replaceable drive for this? What do I do with the DVD? Can I sell it back?
I need to do music recording with this. I was wondering about the IEEE 1394 spec; the latency etc. If I remember correctly the W510 IEEE1394 was very good, probably was manufactured by Texas Instruments. I could not find anything about it anywhere. Not even here: http://www.lenovo.com/psref/pdf/tabook.pdf
Also, a bit worried about the sound card. How good is it? Did anyone use this laptop for music recording?hey udvranto,
with regard to this, i would suggest contacting tech support via the number listed in the link below to check if it is possible to replace the dvd with your harddrive.
http://www.lenovo.com/contact/us/en/
on the part of the soundcard, I believe it is good for music recording. Though this really depends on the software that you're going to use to record.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Error 4900 When burning discs PLEASE HELP ME !!!
When i try burning a disc from itunes, after about a minute of doing stuff the disc ejects and i get a message saying there was an error burning the disc (4900)
This has only started happening the past couple of weeks, before that i never had any trouble burning discs from itunes atall.
It is very frustrating as i havent a clue what it means or what to do about it, can anyone help me fix it???
Please!!!!!!!!!!!!!!!!!I just ran the diagnostics test and this is the results
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
Acer Aspire 5520
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11 (118.5)
iTunes Serial Number 25042FB61CBEED6A
Current user is not an administrator.
The current local date and time is 2008-10-04 17:29:33.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7000M / nForce 610M
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {FB97CCED-8C3D-4788-9FD1-7EDF228EAD8D}
Description: Broadcom 802.11g Network Adapter
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Oct 04 17:05:55 2008
Lease Expires: Sun Oct 05 17:05:55 2008
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {4A66390C-37F1-4179-AF6D-56BE200D52CB}
Description: NVIDIA nForce Networking Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-09-26 09:39:17.
** CD/DVD Drive Tests **
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.0.7.5),
E: MATSHITA DVD-RAM UJ870QJ, Rev 1.00
Audio CD in drive.
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4900(0x00001324). It happened on drive E: MATSHITA DVD-RAM UJ870QJ on CDR media at speed 24X.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.1.11 is currently running.
iTunesHelper 8.0.1.11 is currently running.
Apple Mobile Device service 2.11.32.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod nano (3rd Generation) running firmware version 1.1.3
Serial Number: 6U747640YXR
Maybe you are looking for
-
SAP GUI Compatibility issue with Windows 2008R2 64 Bit
Hi Gurus Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit. Your inputs greatly appre
-
Help - Trying to email 2 page PDF but only first page is attaching
I have been trying to email a two page pdf (resume) but each time in Mail, it only attaches the first page (actually, it doesn't attach it but paste the first page of the pdf into the document). I've tried this three different ways, all with the same
-
My iPad has a rainbow stuck on it
-
PRCD-1135 : There is no listener defined for network
When trying to add service to the cluster it giving error. {oracle}107: srvctl add service -d ORCL -s abc11 -r ORCL1,ORCL2,ORCL3 -P BASIC -y AUTOMATIC -e SELECT -m BASIC -z 3 -w 1 PRCD-1135 : There is no listener defined for network 10.16.144.0/255.2
-
What is the current version of CP8? I have 8.0.0.145 on my machine and the update option in the help menu is grayed out.