Please Help in Connecting to a Postgres database

Hi,
I installed the ODI 10.1.3.5 in my PC, I'm using a Windows Server 2003 R2 Standard Edition, I puzzled of how to connect to a Postgres Database. I downloaded a postgresql-8.1-413.jdbc3.jar driver and placed it in the \OraHome_1\oracledi\drivers. Then what will I do next?
Thanks,
Randy

Hi CTS,
That was helpful, But I already added Postgres in Topology.
My problem now is how to create a Master Repository in Postgres?
Here are my settings;
Driver : org.postgresql.Driver
URL : jdbc:postgresql://localhost:5432/mydatabase
User : username
Password : password
I select PostgreSQL in the Technology, badluck I receives this error message.
Error Detected during Repository Installation com.sunopsis.tools.core.exception.SnpsRuntimeException: com.sunopsis.tools.core.exception.SnpsRuntimeException: Unable to find the XML file corresponding to your technology.
Please someone help me on this.
Thanks,
Randy

Similar Messages

Please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

please help, i connect my phone to computer and gives me error code this i phone cannot be used because the apple mobile device is not started

http://support.apple.com/kb/HT1923
uninstall and reinstall
there is a complicated way to work with just the mobile device support but its simpler just to uninstall itunes and related components and then reinstall itunes
ur music will be fine, u will just lose the playlists. but ur mobile device support will be working again.

Please help! Connection!

When I plug in my ethernet cable to my PB it does not recognize my internet connection. When I plug in the same ethernet cable into my other computers, it works fine. It is something with my PB ethernet connection, for some reason it just quit working. The only options displayed in my network preferences are Airport and Modem connection nothing regarding ethernet connection.
Please help
Thank you very much
Jason

Check that you have ethernet-port selected in System Preferences/Network. You can find that in the drop down menu in Show: Network status (or whatever it's in english). The bottom selection let's you select which ports are in use.

HBR running error (Urgent, please help) Error connecting to Essbase Server

Hello All Expert
When running business rule either from Planning Web (Planning 9.3.1.1.8) or EAS, sometime there will be a error "Error connecting to Essbase Server" appear.
After the error appear, all the can't be run.
But after a while, problem may disappear and all the rules can be run.
Anyone having this problem before, please help
Eric

I am actively using the EAS, but the error is suddenly come that I think I am not logout by server

Please help! connection problems

ok I've been working on this for several hours now and can't figure it out. I just moved back home and my connection was working some yesterday but I can't get it to work anymore.
It says I'm connected but it won't receive any packets. I changed the SSID name and removed the old SSID's. I reinstalled my wireless pci card drivers and switched pci slots. I updated the router's firmware (it's WRT54G). I changed Advanced Wireless Settings as suggested: Beacon Interval: 50; lowered Fragmentation and RTS threshholds by 40 each. I switched the router to channel 11.
I've tried repairing the connection many times (some times it works, most times it won't renew IP address); I've also reset the router many times.
My computer skills are intermediate but certainly not advanced. I can't directly connect it to the modem via cable b/c I don't have the necessary hardware (modem card?). I talked to tech support and I was able to "ping yahoo.com," google, etc successfully but it just won't receive packets...Please help!

The best thing to do at this point is to go back over setting up the wireless security settings again and make sure that while you are setting up these settings that you connect an Ethernet cable from that computer to the router then perform a power cycle
You need to remove the power cable from the Linksys router, then remove the power cable from the modem, wait about 60 seconds, then plug in the modem, then plug in the Linksys router. Wait about 3 minutes while the modem and router sync back up. Once all light are back on,disconnect the ethernet cable and now try to connect.
Here are instructions to follow if you need them
Setting up your wireless connection in your router.
*** Step #5 = you can choose the type of encryption that fits your set-up, the example I give is: WPA/TKIP+AES
***Also Pay close attention to the security and security key information and make sure it matches. (What is entered in the router must be entered in the computer.
1.Open Internet Explorer and type 192.168.1.1 into the address bar.
2.You will now get a sign-in box, User Name = (Leave Blank)
                                                       Password = admin (all lower case letters)
3.Once the set-up page opens, click on the Wireless Tab as youwill need to change the settings. A) Wireless Network Mode = Mixed
              B) Wireless Network Name (SSID) = Choose any name and do not use Linksys.
              C) Wireless Channel = 1, 6 or 11 is best, so see which work best for you.
              D) Wireless SSID Broadcast = Enabled.
4. Now go to the bottom of the page and click on save settings.
5. Click on the Wireless Security Sub tab.
              A) Security Mode: WPA
              B) WPA Algorithms: TKIP + AES
              C) WPA Shared Key: Type 24 letters, and numbers using lower and upper case letters
              D) Group Key Renewal: 3600
6. Once again go to the bottom of the page and click on Save Settings.
7. Now you can close out of this page.
8. You will now need to enter the security info into your computer. I will now give you 2 links, depending which operating system you have, Vista or XP you will follow the one you have.
Vista = http://www.home-network-help.com/wireless-adapter-configuration-in-vista.html
XP = http://www.home-network-help.com/wireless-adapter.html
Now try to make a wireless connection.
Good Luck,
Ttech

Please help us connect my children's new Nanos to the computer!

I just purchased two Nano's for my children. I have followed the instructions on the CD to install and format the Nanos. We can get the software to load onto the Dell computer but cannot proceed with the next installation step to have it load onto the Nanos. When we plug the Nanos in during the installation step, we cannot select "NEXT" to proceed with the next step. The computer does not recognize the plug in. We have tried both USB ports in the front and back. All are USB 2.0. We have removed all Dell Jukebox and MusicMatch software. And tried to install downloading directly from the Apple website. Please help us! One very frustrated mom and two sad children!
Dell Dimension 4600C Windows XP

I have the EXACT same problem...same pc also. The USB ports are good (I've tested with other USB devices). I've installed the Itunes software w/o connecting the Nano (because the software wouldn't let me per above; the NEXT button is grayed out when asked to connect the Nano during installation), and the Itunes software seems to be working fine, but does not see the Nano. No yellow question marks in Device Manager until I plug in the Nano, then I get the yellow question marks under Other devices, subheading is USB device; The drivers for this device are not installed. (Code 28), To reinstall the drivers for this device, click Reinstall Driver. I try reloading drivers by pointing to the CD that came with the Nano, but no good. I've also tried reinstalling the Itunes software and updater 3 times, reset both Nanos, and I still don't get the pc to recognize either Nano. I've reviewed the 5 r's and no help either. Nanos batteries are charging fine. Thanks for any help that can be provided!

Please help - Unable to get the cluster database home page

I have both the RACDB1 & RACDB2 instances running (and the 2 listeners also) . But I do not get the the cluster database home page. Instead I get startup/shutdown page. EM later confirms both instances are up.
But how do I connect to the RACDB database to perform any admin work from within EM ?
Any help is appreciated.
Thank you.

Ehm. Before placing? At that point ID doesn't know anything at all about the PDF.
var myPDFFile = File.openDialog("Choose a PDF File");
myPDFFile.execute();
Then check the lower left bottom -- it should display the page size.
Why not first place the file and then check its size? You can always move it to the right position after placing.
Oh, by the way: "a PDF" doesn't have a "page size". Each single page in a PDF can have a page size of its own.

Help to connect to Oracle 9i database from an java programme in Solaris 5.9

Hi,
I use to access Oracle Databse in Windows machine by creating DSN using ODBC and the following piece of code
import java.io.*;
import java.sql.*;
public class DBConn
     public Connection con;
     public DBConn()
          try
                         Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                    catch(Exception se)
                         System.out.println("Error here driver:" + se);
                    try
                    con = DriverManager.getConnection("jdbc:odbc:AJProject","seplc30","happy");
                    catch(Exception se)
                         System.out.println("Error here connection:" + se);
Now I have to port the same in Solaris 5.9 platform .Please help me ut by providing the details step to do the same.
Thanks & Regards,
Saibal

Hi,
It's easier and better to switch to the thin driver instead of using the jdbc-odbc bridge. The thin driver is written in pure java.
/Kaj

Please help me connect eMac, cable modem, and Airport Extreme Base Station

I connected Ethernet cord from cable modem to Airport Extreme Base Station and then another Ethernet cord from Airport Extreme Base Station to eMac, but I could not get internet access on my eMac that way. I'm only getting internet access by directly connecting eMac to cable modem. Can someone please help me with a step by step explanation of how to set these 3 machines up so that I can have internet access on both my eMac and, wirelessly, on my new MacBook. Thank you very much in advance.
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)
eMac & MacBook Mac OS X (10.3)

jenngee, Welcome to the discussion area!
Ensure that you power off the cable modem for a minute or so when you switch it to another Ethernet device.
Ensure that you are connecting the WAN port of the AirPort Extreme base station (AEBS) to the cable modem. The eMac should connect to the LAN port.
The steps for setting this up can be found in the "Designing AirPort Networks" (direct PDF link) document. Look through that document and try to get it setup. Then return here if you have more questions. Don't forget to post what you tried and the issues you encountered.

Please help. store connection issues.

Error Message: iTunes could not connect to iTunes store. Please check network connection and try again.
Specs: MacBook, 10.4.11, iTunes 7
Additional Information: Another computer with iTunes 9.2 can connect to store just fine. Also, there aren't any proxies enabled and I can access the internet from the MacBook.
Please help.

Read this support article:
http://support.apple.com/kb/TS1713
I have found that often jiggling the connector or snapping it gets it to work.
Ciao.

Please help, cannot connect to Access database with a jar file

Hi, i created a jar file from my java project, using eclipse.
When i try open the jar through command prompt, the following error is given:
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Could not find
file '(unknown)'.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLDriverConnect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcConnection.initialize(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at Methods.con(Methods.java:15)
at LoginScreen.getCmboLogins(LoginScreen.java:80)
at LoginScreen.getJContentPane(LoginScreen.java:65)
at LoginScreen.initialize(LoginScreen.java:46)
at LoginScreen.<init>(LoginScreen.java:31)
at DataUse.main(DataUse.java:25)
No Connection to dataBASE
The program runs fine within eclipse and the database is bundled in the jar.

rohangr wrote:
The program runs fine within eclipse Because the database isn't in the jar.
...and the database is bundled in the jar.That isn't going to work.
The MS ODBC driver (which has absolutely nothing to do with java) expects to find the MS Access file in the windows file system.
And the contents of the jar file does not fit into that requirement.

2nd hand ipod please help with connection

Hi there
I have purchased a 2nd hand ipod mini. I have not had one before so i dont know the first thing about them. I have downloaded Itunes, but when I try to connect the lead to usb port my internet connection goes and I cant do anything with it. The message comes up please check your settings, but I dont know what I should be doing.
Please help

see if this helps
http://docs.info.apple.com/article.html?artnum=304468

Please help with connection problem!

Hi people,
I am trying to use Siemens Speedstream 4200 modem to connect to the internet using its ethernet port. It is connected via USB to my wife's HP Pavillion DV9000 laptop (Win XP)and works fine with that. Almost all hardware in Brazil where I live does not support mac, so I'm not sure if the modem is made only for PC. I imagine that's unlikely. I have tried using both a simple direct ethernet connection to my mac as well as via my airport base station (which I initialised) but to no avail.
My airport is connected and has the IP address 10.0.1.2. I have also checked 'set serice order' to make sure the correct method of connection is at the top of the list. Do I need to find out some of the PC's network info to apply to my mac's setup?
Please, any help most appreciated as I need to connect for my work.
Thanks! Ben

1st the technology is the same worldwide, and it is not restricted to Mac only or Pc only the technology works on all compuuters irreguardless of the manufacture.
Turn off the Modem you are using and the same with the Airport Base.
Plug the ethernet into the Speedstreme Modem and into the Airport Router start the Modem first and wait a minute and then do the same to the Airport Base.
If your wifes PC is wireless it should connect as well as the Mac.
Get the Mac working first. The Pc should connect as well as the Mac either way with Ethernet or Wireless, if she has a wireless card in her's.
Don't be afraid to consult the paperwork that came with the Airport, or Airport Extreme Base.

Please help me I am not seeing Database table column names in field explorer view

Hi,
I am developing a crystal report using eclipse and sql server. After creating connection, when i drag and drop tables, The table name and its columns should apper in field explorer view. Then we drag the columns onto crystal report. Unfortunately I am just seeing only table names but not column names in field explorer view. Could anyone help me?
After downloading eclipse I have plugged in the crystal report using the following instructions
1. Click on the Help menu, and then Software Updates > Find and Install... to open the Install/Update wizard.
2. Select Search for new features to install and click Next.
3. Click the New Remote Site button. This will launch the New Update Site wizard
4. Type the Business Objects Updsate Site for the Name field and the following for the URL: http://www.businessobjects.com/products/dev_zone/eclipse/
5. Click OK to complete the wizard.
6. Enable the newly created Business Objects Update Site checkbox as well as the Callisto Discovery Site (which should appear by default with Eclipse 3.2) and click Finish.
Expand the Business Objects Update Site node and enable the Crystal Reports for Eclipse 1.0.0v555 checkbox.
8. Expand the Callisto Discovery Site and click the button "Select Required". This will automatically select the required Eclipse features necessary to successfully install Crystal Reports for Eclipse.
Thank You
Rajavardhan Sarkapally

Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
If you are using SQL Server 2012/2014, then you can use
sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Please help! connection.rollback() doesn't work for me.

I have two updates to the database. If either one fails, all the changes should be rolled back.
I set the auto commit to false before the updates started and invoked rollback() if any exception was caught.
During the execution of the program, an exception was caught. And one table got updated and the other didn't.
I can see "TRYING TO ROLLBACK~!!!! ROLLBACK!!!" and "ROLLBACK FINISHED!!!" printed out. But the change made to
one table did not get rolled back.
And I tried to call rollback() right after the first update was made. But it didn't rollback the changes made
to the database.
Why doesn't the rollback() work?
Development environment:
Database:     MySQL Server 4.1
jdbc driver:      mysql-connector-java-3.1.8
JDK:          jdk1.5.0_04
          Connection connection = dbConn.getDBConnection();
          String insertDummy1= "insert into dummy1 values(?)";
          String insertDummy2 = "insert into dummy 2 values(?)";
          PreparedStatement psCA = null;
          PreparedStatement psCD = null;
          try {
               connection.setAutoCommit( false );
               psCA = connection.prepareStatement( insertClientAccount );
               psCA.setString(1, cName);
               psCA.executeUpdate();
               psCA.close();
               // connection.rollback();
               psCD = connection.prepareStatement( insertClientDetail );
               psCD.setString(1, cName);
               psCD.executeUpdate();
               psCD.close();
               connection.commit();
          } catch(Exception e){
               if( connection != null ) {
                    try {
                         System.out.println("TRYING TO ROLLBACK~!!!! ROLLBACK!!!");
                         connection.rollback();
                         System.out.println("ROLLBACK FINISHED!!!");
                    } catch(Exception ex) {
                         System.out.println("Exception!! try to roll back >>> " + ex.getMessage() );
                         ex.printStackTrace();
               processResult = "Failed to complete the process. " + e.getMessage();
               System.out.println("Exception!! >>> " + e.getMessage() );
               e.printStackTrace();
          } finally {
               psCA = null;
               psCD = null;
               try{
                    connection.close();
               } catch(Exception e){
                    System.out.println("Exception!! >>> " + e.getMessage() );
                    e.printStackTrace();
               return processResult;
          } // try

In MySQL, there are several different storeage engines/table types. Some of these table tables support transactions (and therefore commit() and rollback() ) and some do not. I believe that if you use a non-transactional table type, it's effectively the same as having autocommit=true (and commit() and rollback() are then silently ignored).
See:
http://www.developer.com/db/article.php/2235521
http://dev.mysql.com/doc/mysql/en/storage-engines.html
I have used the InnoDB storeage engine and have had no issues with transactionality.

Please Help in Connecting to a Postgres database

Similar Messages

Maybe you are looking for