Please help in db connectivity issue after servers moves to diff location
Our database is 10.2.0.3 with 2 nodes in RAC. Our database servers are MS 2003 R2. Recently we moved our database to different servers in different location. Say we have location A, B and C.
A - the location for database users include me.
B - the old db location
C - the new db location.
Location B and C are in the same city but different places. A and B are located in different cities. I was told that there is no direct connection between A and C and the connection between A and C has to go through B. Since the move we have experienced database connectivity issue between A and C. Some users got “ORA-03113: end-of-file on communication channel”. For me I have constantly got “ORA-03135: connection lost contact” from Sqlplus or Toad if I leave my session idle for one hour or longer no matter if it uses dedicated connection or shared connection. We also asked our network admin to make sure there is no firewall in between and we also add KeepAliveTime and KeepAliveInterval to the new db server registry. We also have a TAR with Oracle.
Thanks a lot for your help in advance.
Shirley
It feels like a firewall issue, yes. But this is realistically just a hunch-- your network admins ought to have a lot more tools at their disposal to diagnose the problem. It's quite possible that it's not a firewall but a flaky router or excessive packet loss over a WAN or any number of potential network related hiccups. If I had to place a bet, I'd be wagering on a firewall, but I certainly wouldn't be staking my life on it. I'd definitely be leaning on the network folks to diagnose the issue(s)-- there may well be multiple problems, i.e. a firewall that times out idle connections after an hour and a flaky router that drops connections for some subset of users between A and B.
Justin
Similar Messages
-
Please help; iMac G5 connection issues.
Hello,
Granted this is not the first time I have had frustrating network troubles with these units, however this time I just can't seem to fix it.
We are running a couple iMac G5's 1.6 GHz, 512mb ram w/ Mac OS X 10.4.11, both have airport cards installed and have worked on the network before.
As of the other day they both decided they no longer wanted to be on the network and just sort of dropped off, nothing was changed on the computer end or the modem end. I have attempted running network diagnostics, resetting the modem, recreating locations, powering off for extended periods and even so far as to do a tcpdump with terminal commands. I just can't understand why these machines have such problems with networking and why it has to be so extremely frustrating to troubleshoot. Can anyone please help me with a run through of what this could possibly be and maybe a step by step to fix it, I may just be dumb or missing something but blah.
Thanks much
-GChange your router channel number. Most times this works & is all you have to do. Insturctions are inside your router user manual.
See KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
============================
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
If you are using one of Apple's routers, run the Airport Utility app which is located inside the Utilities folder. If using a 3rd party one, read its user manual and/or contact their customer support department/website.
=====================
If using Apple's Airport, please re-post over in one of the AirPort Forums.
-
Please help with database connection issue
Hi,
I've created a few connections and pages with a few recodsets on my local computer and am connecting fine with the database. I've uploaded the database via phpmyadmin onto a remote server and uploaded all my pages to the website and have changed the database info, user name and password in the connections folder but when I try to load the file I get a message "no database selected". I've tried various things but no luck. I'm selecting the database name but something is missing. Any help would be appreciated.
DerekA bit more info: Here is the connection script as its defined in Dreamweaver: <?php
# FileName="Connection_php_mysql.htm"
# Type="MYSQL"
# HTTP="true"
$hostname_karen_product = "localhost";
$database_karen_product = "karen";
$username_karen_product = "root";
$password_karen_product = "root";
$karen_product = mysql_pconnect($hostname_karen_product, $username_karen_product, $password_karen_product) or trigger_error(mysql_error(),E_USER_ERROR);
?>
Where is says mysql_pconnect, I changed the $hostname_karen_product etc to 'localhost', 'username', 'the password for the database')
Do i need to do something different at $database_karen_product?
I'm basically new at this and confused as to how to alter this connection script.
Thanks
Derek -
Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
NishanthPlease read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
After updating, as requested, each time I select iPhoto, the system is requesting that I download the iPhoto upgrade. I have downloaded this several times. However, I continue to receive this message. Please help me resolve this issue.
Can you give us the exact error message you get?
-
Database get hang please help to resolved the issue.
Hi,
we are getting below error at that time db not allowed user to connect database.please help to resolved the issue.
db version is 10.2.0.3
Errors in file /oracle/oradata/bdump/pmspr_j002_1593486.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j003_1347686.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j004_1995004.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Process OS id : 2064550 alive after kill
Errors in file /oracle/oradata/udump/pmspr_ora_1572972.trc
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j005_1617988.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j007_1523820.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j009_1933354.trc:
ORA-12012: error on auto execute of job 42596
ORA-27468: "EXFSYS.RLM$EVTCLEANUP" is locked by another process
Tue Jan 3 10:21:55 2012
Errors in file /oracle/oradata/bdump/pmspr_j006_1536044.trc:
ORA-12012: error on auto execute of job 42597
ORA-27468: "EXFSYS.RLM$SCHDNEGACTION" is locked by another process
ThanksI think the following Oracle two note looks interesting:
Note: 330725.1 Scheduler Job has Been Locked For Days Ora-27468
Note: 731678.1 Scheduled jobs do not run as expected after 10.2 upgrades
HTH -- Mark D Powell -- -
Is there a fix for the wifi connectivity issue after ios6 update?
Is there a fix for the wifi connectivity issue after ios6 update?
Cannot connect to any wifi since update to 6.0.1
How do I get update to 6.0.2?
Will that even help?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Is there any fix for the bluetooth connectivity issue after most recent OS update?
Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?
There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you. -
Bluetooth connection issues after update
Is anyone experiencing bluetooth connection issues after upgrading to iOS 8.1.3? I upgraded to iOS 8.1.3 and now it won't connect to my car bluetooth and my bluetooth speaker will sound like it has static from time to time.
Hi, joshzik.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing issues with various Bluetooth devices and your iPhone. Sometimes pairing the devices again can resolve the issue. However, here are a couple articles that have some helpful troubleshooting steps regarding Bluetooth connectivity and an iOS device.
Get help using your iPhone, iPad, or iPod touch with your car stereo
http://support.apple.com/en-us/HT203412
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
-Jason H. -
Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support -
Calendar and Time showing in arabic but my phone's language is English. I bought my phone from DU in UAE , Dubai. Please help me solve this issue while keeping the Region to United Arab Emirates
Valentine350z wrote:
while keeping the Region to United Arab Emirates
Not possible, I think. Tell Apple how you feel about this at
http://www.apple.com/feedback/iphone.html -
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
Hey guy can you please help me with this issue PLEASE!
Hey Apple can you please help me with this issue, i have a iPhone 3gs and when i put my sim card into the iPhone it makes iphone 3gs shut down suddenly how do i fix that?
iPhone version: 6.0.1
service provider: Vodafone nzYou could restarting your phone that sometimes fixes issues
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e
I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply
-
Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??
Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????
Maybe you are looking for
-
TS1363 windows recognizes ipod....but not itunes
I've followed all the different steps in troubleshooting, but my ipod classic still will only show in my computer & not on my itunes. My Itouch shows fine & just recently my classic quit registering with itunes.....any ideas?
-
I have given my iMac 2007 model running mountain lion OSX 10.8.3 to a friend and she doesn't have an external hard drive to back up would using iCloud be as good to back up files pictures etc and can I find them again if lost please.
-
How do you set-up a floating image in a header or footer?
I want to place a floating image in the header or footer so it repeats on every page of a section. Somehow this has been achieved in the Project Proposal Template but I can't work out how you set something like this up from scratch. Can you help me?
-
How to get data of Oracle Applications tables in APEX
Hi all, My requirement is to Develop Oracle apps Order Management Reports in APEX. But when i am trying to query the table or view i am unable to get data in APEX. Ex: If i query the Sales order form view OE_ORDER_HEADERS_V in toad i am able to get d
-
Missing Tags in upgrade from PSE 10 to PSE 11
My "people tags" used in pse 10 now show up as groups in pse 11, how do I add photos to these groups? What am I missing? Thanks for any help. jthinpa