Please help in native window concept
Hi friends,
could you please help me in creating native windoew in flex application with a small example.
should i d,any environmental adjustment
because when i declare
<mx:WindowedApplication > as the root tag an error is displayed as
An unknown Item is declared as root of your mxml document . switch to ssource and make a correct to it.
Thanks in Advance!!!!!
Normally, you would create a new mx.controls.Window
Similar Messages
-
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I have windows 64 and trying to download itunes 10.5, it start downloading but then after it`s almos finish i have a window pup up with error Microsoft ft VC80.CRT,type="win32" etc.Please help.I have windows 7 64
same here.
-
i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use
Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986 -
Please help with minidump - Windows 7 64 bit
Hi,
I recently reinstalled Windows 7 and since reinstalling, I've been having a problem with BSODs when running Freemake Video Converter which was working flawlessly before the reinstallation. No hardware changes have been made, nor any BIOS changes.
I was getting various different BSOD messages and they seemed to point to Kaspersky 2013 so I uninstalled that, ran Kaspersky's uninstallation tool but still kept getting BSODs when running Freemake.
So I formatted and reinstalled Windows 7 64bit again and installed MSE instead of Kaspersky.
I am still getting BSODs using Freemake though and it looks like a driver problem but that's as far as I can guess!
My system consists of an Intel 2600k, 16GB RAM, Ati HD5450 VGA, 250GB Samsung 840 Pro SSD, Asrock Z68Extreme7 motherboard, various SATA storage drives, Pioneer DB-206K Blu-ray writer.
Could someone please help? I have installed Windows Debug and here is my latest minidump:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\030414-9313-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\windows\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`02a4c000 PsLoadedModuleList = 0xfffff800`02c91e90
Debug session time: Tue Mar 4 02:26:40.038 2014 (UTC + 0:00)
System Uptime: 0 days 0:09:52.787
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002ae88a4, fffff880072ffd00, 0}
Probably caused by : Unknown_Image ( nt!KeReleaseSemaphore+1e4 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002ae88a4, Address of the instruction which caused the bugcheck
Arg3: fffff880072ffd00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh]
CONTEXT: fffff880072ffd00 -- (.cxr 0xfffff880072ffd00)
rax=0000000000000037 rbx=fffffa8010760580 rcx=fffffa8010760620
rdx=0000000000000000 rsi=0a1001c9ea0fd64d rdi=0000000000000000
rip=fffff80002ae88a4 rsp=fffff880073006e0 rbp=fffffa8010760688
r8=0000000000000000 r9=0000000000000000 r10=0000000000000000
r11=fffff8a00a3e3130 r12=0000000000000001 r13=fffff880009ec180
r14=fffff880009b3101 r15=fffffa8010760948
iopl=0 nv up ei pl nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010207
nt!KeReleaseSemaphore+0x1e4:
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh] ds:002b:0a1001c9`ea0fd678=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: FreemakeVC.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from fffff80002dd7d60 to fffff80002ae88a4
STACK_TEXT:
fffff880`073006e0 fffff800`02dd7d60 : fffffa80`00000000 fffff8a0`00000001 00000000`00000000 fffff8a0`0a3e3000 : nt!KeReleaseSemaphore+0x1e4
fffff880`07300760 fffff800`02dd954e : 00000000`00000000 00000000`00000000 03030303`00000000 00000000`00000000 : nt!AlpcpCompleteDispatchMessage+0xa10
fffff880`073007f0 fffff800`02dd6e4f : 00000000`00010002 fffff8a0`024ae648 00000000`00000000 00000000`00000000 : nt!AlpcpDispatchNewMessage+0x24e
fffff880`07300850 fffff800`02da1d53 : 00000000`00000030 00000000`00000000 00000000`00000000 fffffa80`0f137900 : nt!AlpcpSendMessage+0x4ad
fffff880`07300950 fffff800`02da2465 : fffff880`00000000 00000000`051fe600 fffffa80`0f137900 00000000`00000000 : nt!PspExitThread+0x223
fffff880`07300a50 fffff800`02da2575 : fffffa80`0f137990 00000000`00000000 fffffa80`0f137990 00000000`7ef01000 : nt!PspTerminateThreadByPointer+0x4d
fffff880`07300aa0 fffff800`02acb8d3 : 00000000`00000000 fffff880`07300b60 00000000`7ef01000 00000000`00000000 : nt!NtTerminateThread+0x45
fffff880`07300ae0 00000000`76e2184a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`051fe668 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x76e2184a
FOLLOWUP_IP:
nt!KeReleaseSemaphore+1e4
fffff800`02ae88a4 0fb6462b movzx eax,byte ptr [rsi+2Bh]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!KeReleaseSemaphore+1e4
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: Unknown_Image
DEBUG_FLR_IMAGE_TIMESTAMP: 0
STACK_COMMAND: .cxr 0xfffff880072ffd00 ; kb
BUCKET_ID: INVALID_KERNEL_CONTEXT
MODULE_NAME: Unknown_Module
Followup: MachineOwnerLemental2
Both of these were inconclusive and were different error codes (BCC). Though Freemake was the active process I think there is an underlying issue. Please run driver verifier as instructed in this wiki. It will give a much better chance
of "catching" the mis-behaving driver.
Please run this test to find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag -
Very Urgent...Please Help..Invoking Windows Applications
I capture the Windows Desktop screen and saved it as a .jpg file. I then display the .jpg file on frame ( whose size is that of the screen ). Now if i click on the frame, the corresponding Window's application should be invoked ( i.e if I click on the frame where the Start Menu is shown, then the Start Menu should be opened ). Please help me with the code for this. I will be forever indebted to the person who can help me. Iam in very urgent need of this help
Not so easy.A JPG file is a compressed map of a "picture",nothing more. So , You have to get a reference to an object of this map - You can't save to a simple file (JPG) and expect to do what you want to do.Think something else , not a simple snapshot.In Win98 you have a directory "Desktop" where are all of your icons , in Win2000 you have to search in "Documents and settings\User_name\" or something like this to find the same directory and get all icons.Therefrom look for "Properties" and find the path to execute the exe file.It must be something like this I think.Hope have been helpfull.
-
TS1717 Please help download issue windows 7
please help! I installed the new version of itunes and now when i try to run it, i get a message that says, "this version is corrupted or not installed properly." i'm afraid to uninstall and lose all my music.
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
Please HELP! DOWNLOAD WINDOW PROBLEM
When i start download, no any window appears. If i open standard "downloads" in startup menu - some library opens. I can see my downloads there, but it is not as usual. I just want to see usual window! help me please. Previously i never had problems with this soft! / Firefox 20.0 (rus) / Windows 7 x64
Hello,
In Firefox 20 we changed the Downloads Window to a new Downloads Panel. This panel is located on the top-right of your Firefox toolbar.
For more information, see: https://support.mozilla.org/kb/find-and-manage-downloaded-files#w_how-do-i-access-my-downloads. -
Please help with reinstalling Windows 8 on the U410 touch!
Hello,
I've recently dropped my U410 touch laptop from a small height, but it landed unfortunately and the hard drive was running, which eventually lead to its failure. After getting this hard drive replaced, I ordered the recovery disks in order to reinstall the Windows 8 OS on my machine.
Here is the problem I encountered: the U410 touch does not have a CD drive and thus I cannot insert the recovery disks in the device. I have access to my old laptop and I have been trying for the past few days to connect the two, ( with an Ethernet cable) in order to be able to use the CD drive of my old laptop.
What I have done already:
- repaired my hard drive
- allowed access privileges to everyone on my old laptop CD drive
-recovered the Lenovo recovery disk for my specific model and Windows OS
- tried numerous times ( to no avail) to get the cd working for my new laptop
What I would really appreciate help with:
- instructions how to connect my old CD drive to my newer laptop
- launch the recovery sequence from the CD drive of my old laptop
Any help would be really appreciated,
I am quite lost with this.
Thank you, for your time.Hi Aerchaos,
Welcome to Lenovo Community Forums!
I’m sorry to hear about your situation as there are many issues in this computer and the best available option to get this issue resolved completely is by Calling Technical Support for Assistance to get the information of the nearest Authorized Service Center.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Please help me! WIndows XP Pro x64 can't setup sound card
My system is Lenovo N200 0687 U28, Windows XP Pro SP1 x64, I tried many time to setup Conexant-Audio-Driver and never success. May Anyone can help me, or tell me someone or some where can implement this problem.
THanhks alotBDaqua's suggestion to turn off WEP or any other encryption is like saying
Q. "I need a secure home so I got a new high security lock fitted on my front door but the key is a bit stiff and I can't always unlock door'
A. 'Well don't lock the door leave the door unlocked and you will have no problem getting in or out'
My answer would be to try a different lock.
WEP is insecure so you may as well leave the door open. So any articles about bootcamp and WEP problems you can ignore.
Try setup your network to use the former WPA standard setup a WPA-PSK (pre shared key)
Try using WPA and not WPA2 to getinto your network from windows XP.
Also have a look at this article from microsofts knowledge base.
Does the Airport/Wireless hardware in the MacBook Pro not work with bootcamp?
I am using bootcamp and can connect my macbook running XP to my wireless network using WPA. -
Please help on installing windows 7 on late 2013 imac 27"!!!
I am using imac 27" late 2013. I tried installing windows 7 64bit using boot camp assistant and it went well. I also download the latest bootcamp 5.
However i cant install bootcamp on the new windows 7. Anyone have the same problem?I have same issue
Tried everything differend hdd,ssd as well
Basically when trying instal win 7 via iOS maverick when reboting and windows booting to the first scree everything freezing cant do much.
Also tried install clear ssd without any system, but soon after format ssd or hdd I have error that I cant use this disk to install windows!!!!!!!!!!!!!!!!!
What is funny Windows 8 installing without any problem!!!
what is going on APPLE??wher is support
This issue I have only on Late 2013 on my other Late 2012 this issue not exist and everything working as should. -
Please Help: Cant' get Windows computer to see network printer
Hi,
I have my printer shared on our network directly into the airport. All of the Macs can use it no problem, but when we try to get a Windows computer to access it, we're having no luck.
I followed these direction I found on Macworld:
AirPort printer sharing isn’t restricted to Macs: Windows PCs can also use an Air-Port print server. To set this up, you’ll need the AirPort’s IP number. (By default, it’s at 10.0.1.1.) With the PC attached to the AirPort wireless network, open the Add Printer wizard in Printers and Faxes. Following the steps in the wizard, create a local printer, deselecting the Automatically Configure option. Next, click to create a new Standard TCP/IP Port, and enter your AirPort’s IP number in the IP number field. If the IP number is 10.0.1.1, the queue name should automatically fill in as IP_10.0.1.1. In the next screen, select Standard as the device type, and then specify Hewlett Packard Jet Direct. Finally, click on Finish, and then select your printer make and model from the list of available drivers.
but had no luck as well.
I'm trying to connect to an HP Lasterjet 2200.
Thanks,
-TimI fixed the problem. I coudln't get the Windows machine to find it on the network unless it was actually plugged into the USB port of the Airport Extreme.
-
Please help keep dos window open
Greetings folks,
Does anyone know how to keep the dos window open after executing a command line Java program?
Many thanks,
Baldeepbaldeep_deep wrote:
DeltaGeek wrote:
You have a few choices
1) Read something from System.in Your app will block until you hit a key.
2) Open a commandline window and run your app from there.Unfortunately, I cannot modify the code to read from System.in since this code has gone to production. Is there another way?You can't change the code?
That kinda removes your options now doesn't it?
Can you modify the batch file (and even so, if you can't change any Java code I am not sure why you're posting to a "new to java" forum...) -
my photoshop cc doesn't work. "_crtCreateSymbolicLinkW not found in DLL "C.\Windows\SYSTEM32\MSVCP110.dll"". Please help
I checked my windows 7 pro machine for the module I see many copies if the DLL with different dates two different sizes all are version 11.0.51106.1 so I guess there are 32bit and 64bit versions. Some are in Adobe folders some in Wacom folders ad in two windows folders including system32. I do not know if there is and entry point "_crtCreateSymbolicLinkW" in it.
-
My nano doesn't work, cannot be find in Windows and itunes. please help!
Before it doesn't work, I am charging the battery.
But when I am about to disconnect it from the systme, Windows prompted "can't be disconnected", I tried several times, the same prompts. So I shut off the computer, but the nano doesn't work.
I have tried the 5-R steps, nothing changed.
there's only the picture of a file folder with an exclamation point comes up, and on the bottom it has apples support website, alternating with a apple logo.
The worst thing is that I cannot find my nano in the explorer, so I cannot restore/update or format it.
BTW, I have disconnected the nano from all power sources and left it disconnected for about 24 hours, reconnect to the USB port, a battery displayed on the screen, but for about 20s, display the the picture of a file folder aggain.
Please help!
A1137 Windows XPWelcome to Apple Discussions!
Is McAfee Virus Scan installed on your computer? That could be interfering with your iPod when you try to eject it.
Also, see these...
iPod shows a folder with exclamation point
http://docs.info.apple.com/article.html?artnum=93736
Can you get your iPod into Disk Mode?
Putting iPod into Disk Mode
See these well-written post as well...
Mitch 751: Sad Face or Folder with Exclamation
btabz
Maybe you are looking for
-
MS Word not able to save open documents/quitting unexpectedly
I've had the following problem more than a few times since I've had my iBook (just over a year): Sometimes when I have a Word document open that I'm working on I'll get one of two messages when I try to save the document. One says something to the ef
-
Where are my apps in the new iTunes?
Where are they? When I connect my iPad it does'nt show up. How do I update apps if I can't find them.
-
How to configure ABAP mappings in iterface mapping
Hi, i am using PI 7.0 ,in interface mapping Abap Mapping will not display in dropdown list. can any one help me how to configure <b>ABAP mapping</b> in interface mapping screen. thanx and reg, suresh
-
Is Native part of the JNI executed in a seperate process space
Hi When a native method call is made from the Java layer to the native layer the method execution happens in the same process space as that of the java or a new process is forked and is executed in the seperate memory space.
-
I've downloaded Firefox 4.0 three times, but whenever I try to run it, I get a message to the effect that it cannot run on my system. I've read that it doesn't work on OSX 10.3, but my system is a later version. What's up?