Please help - install Instant Client on RHEL4

Can someone please give me, or point me to, a detailed step-by-step guide on how to install the instant client on Red Hat?
Also, the person I am working with says I need the Oracle Advanced Networking Option and enable encryption and integrity settings. How do I configure these?
Thanks

Hi,
Please look the downstairs reply. I delete my old reply.
Regards
Message was edited by:
jason.yu

Similar Messages

Help installation Instant client

Hi everybody,
Im a newbie under Oracle.
I need to install Instant client Basic under Windows XP and 2k.
But i did'nt understand how to make it..
I set a PATH under windows environement, but when i try launch JAR files it says to me that FAILED TO LOAD MAIN-CLASS MANIFEST.
Please I need some help.
Merci

Do you want to access Oracle from a program?
If yes, which API do you plan to use? JDBC?
Or do you want to run database queries by hand from a command line?
Yours,
Laurenz Albe

Install Instant Client

I have some question want to use.
Now i installed Oracle 9.i database Server. Then I want to connect to Database Server by Oracle Instant Client. Does Any body can help me?
- Tell me how to install Instant Client in Window 32 in detail (Now i have instant client for 10,do you have instant client for 9).
-How to config instant client so you can connect to Database.
Some body can help me as soon as possible
Thank in advance.

NLS_LANG is one of the variables I wrote about.
What exactly did you do?
Which Instant Client version did you install? How (RPM, tar.gz, OUI)?
Instant Client Lite or 'full' Instant Client?
It is strange that the Oracle 8 Client 'stopped working'.
How did you test the functionality of the Oracle 8 Client?
What did you do, what is the exact response?
Did you change any environment variables or anything else on the system when you installed Instant Client?
Yours,
Laurenz Albe

HT4623 please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.

Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H.

Problems installing instant client and ODBC

I am trying to install the instant client and ODBC drivers on an XP machine so I can connect to an OracleXE database via ODBC for an application to use.
I have unzipped the instant client and ODBC drivers to c:\Oracle and added an entry to the PATH statement.
When I attempt to add an ODBC connection I get the error "The Oracle client and network components were not found. The components are supplied by Oracle Corporation and are part of the Oracle version 7.3 or greater client software installation. You will be unable to use this driver until these components have been installed"
Am I missing something in the configuration?
All help appreciated.

did you set your ORACLE_HOME=c:\ORACLE and run the odbc_install.exe?

Help Using Instant Client ODBC on Linux

I am familiar with using ODBC and visual basic under Windows. I would like to use the Oracle instant client ODBC under Red Hat ES3 within a C or C++ program to access an Oracle database.
Where can I find documentation related to this:
a) setting up an ODBC connection on Linux
b) installing the Oracle instant client on Linux
c) building an application with Oracle instant client ODBC
Am I correct in assuming that any C/C++ ODBC code examples from windows could also be used on Linux.
Thanks,
Werner

We are also interested in the very same thing. We are using third party compiler called SIMSCRIPT from CACI which has a module called SDBC for database connectivity. SDBC requires ODBC to be installed/configured. Our application is for Linux, therefore we are interested in using the ODBC driver on Linux clients to connect Oracle database servers on Linux and Sparc. I see the odbc related zip (for 10g) and rpm (for 11g) instant client files on the OTN Instant Client download page. How to install/configure odbc instant client? Is there a document/whitepaper/Metalink Note ?
Thank you

Please help installing solaris 10 -x86

Hello, Im a total newbie to solaris, can someone please help me installing?
I download solaris-10 x86 and I joined the 5 iso files and burnt the dvd, it appears to be OK, but when I boot the dvd all I get is the command line
GNU GRUB Version 0,95 Grub>
according to the installation notes it is supposed to boot into a menu which allows various installation choices.
How can I start the installation from the command line? or is there something missing from the dvd?
the dvd has 20,023 files) (44,216 folders) (size on disk 3,57GB)
Thanks
Tom
.INSTALL     15/04/2007 23:51:26     Directory
BOOT     15/04/2007 23:51:25     Directory
DEVELOPERTOOLS     15/04/2007 23:53:43     Directory
LICENSE     15/04/2007 23:50:18     Directory
SOLARIS_11     15/04/2007 23:51:25     Directory
.CATALOG     15/04/2007 23:54:09     2,00
.CDTOC     03/01/2007 17:32:58     0,09
.INSTALL_CONFIG     15/04/2007 23:50:18     0,00
.SLICEMAPFILE     06/04/2007 8:01:51     0,41
_VOLUME.INF     06/04/2007 8:01:51     0,01
VOLUMEINF.1     15/04/2007 23:29:08     0,02
VOLUMEINF.2     15/04/2007 23:29:30     0,02
VOLUMEINF.3     15/04/2007 23:27:27     0,02
VOLUMEINF.4     15/04/2007 23:27:41     0,02
VOLUMEINF.5     15/04/2007 23:28:06     0,02
VOLUMEINF.6     15/04/2007 23:28:28     0,02
AUTORUN.INF     19/12/2006 23:29:34     0,05
AUTORUN.SH     19/12/2006 6:29:28     0,31
COPYRIGHT     06/04/2007 8:01:51     6,69
INSTALLER     15/04/2007 23:28:28     0,25
JDS-THIRDPARTYLICENSEREADME     06/04/2007 8:01:52     448,98
README.TXT     21/12/2006 2:17:25     1,41

>
I read one document regarding this but i did't understood.
Please provide necessary steps or you can mail me the required easy to use document/tutor.
>
Please provide us with a link to the documentation you used; also let us know the portion of the documentation you did not understand.
Regards,
Phiri

PLEASE HELP INSTALLING SHOCKWAVE

hello!
i use windows xp- sp2 64bit and while installing shockwave
10, i get the following error message...
the error says:
"Could not load DLL library
C:\Windows\system32\Macromed\Shockwave10\gi.dll. This
application has fail to start because the application
configuration is incorrect.
Reinstalling the application may fiz this problem."
PLEASE HELP, I TRIED ALL IN VAIN
thanks in advance...
romin

I don't know what you mean by "shockwave media player"; there is
Shockwave Player, available from http://www.adobe.com/shockwave/download/alternates/#sp
Adobe Media Player at http://www.adobe.com/products/mediaplayer/
If you still need help, please specify exactly what you mean by "unsuccessful".

Please Help installing latest version and it stops right before the end!!!

i downloaded and tried installing latest version of itunes and it always stops doesnt really freeze just stops it says registering modules i have no idea what that is oh yea is windows xp please help

it always stops doesnt really freeze just stops it says registering modules
the following document is the best place to start with that one:
iTunes 7 or later for Windows Installation stops responding while "registering modules"
(it's best to launch itunes at least once prior to reinstalling SpyCatcher.)

Unable to install instant client, get error code 126

On Windows Server 2008 R2, I have installed and extracted oracle instant client 12.1.0.1.0. I have added to the existing path the location where sqoras32.dll resides. Via the ODBC Data Source Administrator, when I attempt to add the driver to the System DSN, I get the following error
The setup routines for the Oracle in instantclient_12_1 ODBC driver could not be loaded due to system error code 126: The specified module could not be found.
It then lists the correct path and filename for the sqoras32.dll resides.

I had the same issue and was finally able to get it working by installing:
Download Microsoft Visual C++ 2010 Redistributable Package (x86) from Official Microsoft Download Center
(MS Visual C++ 2010 Redistributable Package (x86))
This appears to have been a common problem with earlier versions and earlier C++ Run Time Libraries. Looks like they've updated.

Please help -installed update from itunes wiped my phone

I just installed an update on itunes and it must have done some sort of factory reset as it wiped everything including my contacts from my phone. I plugged it in again to see if it could install a back up and I can't find anything. Also, it started 'backing up' the new empty phone and asked me to register it.
Please help anyone- I had a lot of music and expensive aps on there not to mention contacts and diary entries. I never had problems with it before but this is an absolute nightmare.
Many thanks

Am really annoyed now- by the number of people viewing this thread this is clearly a big problem and yet nobody at Apple has bothered to help. I would much rather pick up the phone and speak to someone but can't because it's been 90 days since my purchase.
I have spent a lot of money on music and aps and it looks like Apple don't even care- it's a disgrace. I can now see what all the fuss is about in the media and why people are angry at them as well. I won't be buying any of their products again that's for sure.

Please help Install problems

I boot from CD run through the sun boot part ok.
Then i select to boot from my CD at the end. THis works fine.
It then starts to load sunOs 2.8 but restarts very shortly after and does'nt give me a chance to read error message.
I tryed loads of different configs with no sucess Please help.
The system i run is a p4 wit intels G850GB Mainboard geforce2, 128MB PC 800

P4, seems not supported yet. Try to look into the
Solaris Intel forum next to this. Some discussions
about P4 already. Maybe you will find what you want.Indeed.
Have a look at
http://groups.google.com/groups?q=solaris+p4+setup_mca+kadb&hl=en&lr=&safe=off&site=groups
these usenet articles give a procedure to boot solaris 8
on a P4 cpu.
Once you've got the system installed using the kadb
procedure given above you should try to install the latest
kernel patch 108529-08 that fixes problem solaris has with
these P4 cpus.

Please Help: Installed new CPU (i7) now system won't boot.

I'm hoping someone can help.
I have an MSI H55M-P31 (MS-7636) motherboard, and I updated the BIOS to 1.A0.
But when I installed the new CPU, I get 3 Long beeps, and then my computer won't boot.
I have 4Gigs of Memory
Current CPU: (working 100%)
3.07 gigahertz Intel Core i3 540
64 kilobyte primary memory cache
256 kilobyte secondary memory cache
4096 kilobyte tertiary memory cache
64-bit ready
Multi-core (2 total)
Hyper-threaded (4 total)
500watt PSU
Please Help, I don't know what to do now. (did check CPU compatibility on website - i7870)

What PSU is that and what are the ratings of that PSU ? See the label on the side.
Are you trying to use the onboard graphics?
That CPU does not have integrated graphics. http://ark.intel.com/products/41315

Please help Installing new Hard Drive. PLEASE HELP

I know this topic has been posted before and I have read all the reviews but still nothing ..
I m trying to install a new hd. I put the screws where there needed to go, plugged in all appropriate SATA plugs into new HD, went to dicl utility and no new HD shows up to initialize or format. Please help me .. I have purchased a 500 gb Seagate HD from ramjet.
Item:
Seagate 500GB SATA II 7200rpm 16mb
Specifications:
Capacity: 500GB
Performance
Rotational Speed: 7200rpm
Buffer Size: 16mb
Transfer Rate
Serial ATA (G/s): 3.0G/sec
Average Seek: < 8.5ms
Average Latency: 4.16ms
I have installed and uninstalled the new HD about 5 times already. Please help me

On older ATA drives there are little plastic tabs that, depending on configuration, designate a drive as "Master" or "Slave." If both drives are configured as "master" it can sometimes cause one not to be seen by the computer.
I only mentioned it because:
A) I had it happen 2x with my old G4.
B) Most new drives are shipped with the jumpers in "master" position, I'm guessing because they assumed most people were replacing their primary drives, not adding them.
Check out these links for more about jumpers on drives.
http://www.seagate.com/support/kb/disc/ref/jumper_settings.html
http://www.pcmech.com/show/harddrive/43/
Good luck!
-K

Need help installing 9i CLIENT on redhat linux

I'm getting very confused trying to figure this out. I'm completely new to Oracle, but not new to Linux. I've read the installation docs, but everything seems to assume that you are going to be installing the full database. I'm not sure what I need to do if I'm just installing the client.
I'm going to be accessing a remote Oracle database with read-only access from ColdFusion, so all I'll be doing is running queries - no updating or creation of records. Do I need to install the runtime version of the client? Should I run a custom install and just install the OracleNet and SQL*Plus components?
Is there any documentation with step by step instructions for JUST installing the client? I can't tell from the full documentation if I need to do all the pre-install and post-install stuff if all I'm installing is the client.
Any and all help on this would be appreciated. The documentation I can find outside of Oracle's all assume that I've already installed the client, and Oracle's documentation is just confusing me further because it is so fragmented.
Many thanks,
Mary

Hello Mary,
I don't know ColdFusion, but I asume you need at least SQL*Net to connect to the remote db.
So run the installer you have (even if you have only the full db software cd's) and select custom install (or manual product selection), there you should select sqlnet and sqlplus the rest will be selected by the installer (dependecies). If it is not automaticly called you have to configure sqlnet afterwards therefor you can execute netca in the $ORACLE_HOME/bin directory or netmgr, I don't know at the moment which is the best one for you. This tools will create your tnsnames.ora config file for the remote db settings.
Hope this helps a little, Olaf

Please help - install Instant Client on RHEL4

Similar Messages

Maybe you are looking for