Please help integrated web cam troubleshooting..

Hello community,
     I recently purchased an idea pad S10 with the 160g hard drive and integrated 1.3mp webcam.  Problem is, the web cam does nothing but take rudimentary pictures.  I was hoping to use it for skype video chats and sending video messages but it appears that I can only operate it much like the simple camera on my cell phone.  ANY help that any one can offer would be greatly appreciated...What am I doing wrong?  Did I miss something?....Thank you so much folks.

Maybe YawCam will help you to operate camera?
//help will save the world

Similar Messages

  • My integrated web cam is not working

    I Am using hp pavilion p001tx laptop. My web cam is not working
    It shows a warning
    No web cam detected. Try to plugging in a webcam into your computer now. If you are using an integrated camera, Make sure that it is turned on.
    Help me please.
    My laptop serial number is [Personal Information Removed]

    Check if the drivers are installed or not.
    Try to update the camera drivers and restart the system.
    You can also go to device manager setting and see if the webcam is disabled or not.
    If everything fails try system resore or run OS recovery.

  • Please help fix my camera

    My iPhone 5 rear camera stopped working after I updated to ios7.1.   The front camera works for a few seconds and crashes afterwards . Please help me I bought the iPhone 5 because it takes good pictures now I can't even take them ....

    Hi Now also,
    Thanks for visiting Apple Support Communities.
    If the camera on your iPhone is not working, try these troubleshooting steps first:
    If the screen shows a closed lens or black image, force quit the Camera app.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    You can find these steps and more information here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the issue persists, back up and restore your iPhone next:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Best,
    Jeremy

  • Integrated Web Cam

    I'm after a technical spec for the Lenovo Integrated webcam. If anyone has any information it would be gratefully received.
    Thanks.

    HRUSHIKESH wrote:
    Dear Sir,
    While opening youcam system says web cam is not found where as my pavilion G4 1201TU is having integrated webcam. driver for youcam is also loaded. Pl advice or help to findout my integrated webcam in my pc .If the hardware is defective or needs to upgrade also advice the way.
    Regards
    Here is a link to a free program that will run to detect if you have webcam or if it still is working. You won't need to install it to have it test your webcam. The program is "CamDiag". This is alot less expensive to see if your webcam is still working or not. It is a zip progam the last time I download it was a exe program but they probably update since then.
    http://noeld.com/programs.asp?cat=video#camdiag
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Code 10 message for integrated web cam

    Does anybdy know what a message of Code 10, unable to open web cam (Simplo ?) for HP DV6910us notebook.     I have Cyber link webcam and it does not work.

    HRUSHIKESH wrote:
    Dear Sir,
    While opening youcam system says web cam is not found where as my pavilion G4 1201TU is having integrated webcam. driver for youcam is also loaded. Pl advice or help to findout my integrated webcam in my pc .If the hardware is defective or needs to upgrade also advice the way.
    Regards
    Here is a link to a free program that will run to detect if you have webcam or if it still is working. You won't need to install it to have it test your webcam. The program is "CamDiag". This is alot less expensive to see if your webcam is still working or not. It is a zip progam the last time I download it was a exe program but they probably update since then.
    http://noeld.com/programs.asp?cat=video#camdiag
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Please help on Web Services

    Guys,
    I am very new in Web Service and VB.Net
    I downloaded sample source of VB.NET and downloaded WSDL of Service Request.
    What should I do with WSDL? where should this file located?
    In VB.NET sample source,I put server = secure.crmondemand.com also put UserName and Password.After click login,I got error Forbidden
    Could you please advice
    Pitiporn

    i want to enter a lead in Oracle Siebel On Demand through java programming, i got a ref. from below link:
    http://wiki.netbeans.org/attach/J1PodDemoWebservices/jaxws_service_designer.html
    I am using Netbeans6.1 IDE, i follow all steps and incorporate .wsdl file with my Java Project.
    My Problems:
    * i got all classess made by IDE but i donot know which class i should use to enter lead? and how?
    Please help me to solve this problem, my email id: [email protected], Waiting for your reply...
    Thank you very much in advance.

  • Help with web cam

    hi there guys
    im having problem with my web cam that i use to use beofre with skype while ago and i cant get it to work agian,i followed the FAQ but still no luck.
    any one can help pls
    regards
    sean

    re-install drivers and try again. ( also easy capture )

  • Integrated web cam not showing any picture or video

    In my compaq 610 laptop i have integrated hp webcam.
    After double clicking the hp webcam icon, the software interface is coming on the desktop,
    and also the blue light near camera on monitor panel is getting switched on
    but there is no picture or video is coming in that software interface.
    Not even in skype or gmail chat plugin.
    Wghat could be the problem?
    help me.
    Thanks

    Have you tried upating the latest version of the Webcam driver from the support and driver download page on www.hp.com? Also try updating the BIOS on the unit.
    Although I am an HP Employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

  • Please help me , my camera raw doesn't open on photoshop or bridge

    my camera raw doesn't open on photoshop cs6 or adobe bridge :S and i don't know what is the reason , when i try to open any of my raw photos i get this message
    so what should i do ? please any one help me here
    thanks

    You’ll need a connection to the internet, and probably have a registered version to do updates.  Sometimes it takes a few minutes for PSE to talk to the Adobe servers and see that you’re needing updates.  If you are connected to the internet, then perhaps your computer has a firewall or internet security that needs temporarily disabled.  So try some things like that.
    You can also try downloading and running the updaters for ACR 8. CS6 from this Adobe blog page:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

  • Integrated web camera not found - problem solving ...

    Hi guys, 
    Skype cannot find my integrated webcamera. When i click 'options', and 'video settings' nothing is showed, and is does not work in conversations as well.
    I have gone through all the steps in the guide 'How can I solve problems with Video Calling in Skype for Windows desktop' - without luck :/
    Info: i have a nearly new (3month old) lenovo T440. Windows 8.1 64bit that is fully updated. Desktop version of skype. It is the first time I use skype on this computer (so it is not like video calling has worked before.. sound aso. works withuot problems)
    Thx for your help - really appriciate!

    Please,  run the DirectX diagnostics tool (32-bit version).
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Please Help! New Cam - Seems to Be Locked

    Hi allI have the Creative Live Cam Optia #4 - Creative Live Cam Center version .3.0 running on Win XP. I have a basic problem. The cam doesn't record any images - ie it won't display my pic even when the cam is pointed at me - the screen has a lock icon on it - which I think is the parental lock thing but I have not initiated a parental lock at all - and neither does a message pop up asking me to put in a password to "unlock" the parental lock - I know the cam is hooked up correctly because the name shows up in the Windows hardware list (thru the control panel) and also the blue light comes on when the application is launched - Plus when I attempt to click a photograph the "clicker" makes a sound and takes a pic of the lock icon on the screen. I just can't figure it out - I'm sure its just some basic setting that needs to be adjusted or somethign .. ? or does the cam lens have an of/off lever or something like that ? I tried to rotate the lens but nothing happened.
    Thanks for your help/suggestions.

    i have got intouch with a friend who has an ipod mini and she said that hers had done this only last week. she said hers was fixed when leaving it to charge over night in a wall plug (i have not got one but hers came with her ipod?) then the next day plugging it into her computer and resetting it by pressing the menu and select buttons. doing this has actually made my ipod respond a little (which must be good news?) but just shows that apple logo and the unhappy ipod logo again but this is more than it has been doing previously. although it is telling me to restore it, it is still impossible to restore because the computer is refusing to recognise it. any little bit of advice will help PLEEEEEEEEEEEEEASE!!

  • Please help with web services (JSR 172)

    Hello!
    I'm in need of some help. I've only worked with web services some few weeks. I have two web services that I want to access from J2ME.
    Both works nice in regular Java (J2SE). I use axis so with the help of WSDL2Java I got a working client.
    One of them has four operations
        public boolean tryToLoginUser( String username, String password ) {}   
        public boolean tryToLogOffUser( String username, String password ){}
        public boolean createUserAccount( String username, String password ){ }
        public boolean removeUserAccount( String username, String password ){ } The problem is when I want to use Sun's Wireless Toolkit 2.2 and create stubs that way with the Stub Generator. It complains with this
    warning: Operation tryToLoginUser is of the wrong encoding SOAP style/use (rpc/encoded).  Document/literal only.  Skipping generation of operation.
    warning: Operation tryToLogOffUser is of the wrong encoding SOAP style/use (rpc/encoded).  Document/literal only.  Skipping generation of operation.
    warning: Operation createUserAccount is of the wrong encoding SOAP style/use (rpc/encoded).  Document/literal only.  Skipping generation of operation.
    warning: Operation removeUserAccount is of the wrong encoding SOAP style/use (rpc/encoded).  Document/literal only.  Skipping generation of operation.What I can tell is I need to put this in my axis deployment descriptor
    <service name="UserWebService" provider="java:RPC" style="document" use="literal">instead of this:
    <service name="UserWebService" provider="java:RPC">This wont work. It don't work with HTTP GET I get this error
      <?xml version="1.0" encoding="UTF-8" ?>
    - <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <soapenv:Body>
    - <soapenv:Fault>
      <faultcode>soapenv:Server.userException</faultcode>
      <faultstring>org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.</faultstring>
    - <detail>
      <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">slukare</ns1:hostname>
      </detail>
      </soapenv:Fault>
      </soapenv:Body>
      </soapenv:Envelope>I doesn�t work with WSDL2Java and when I run Sun's Wireless Toolkit 2.2 to generate stub it complains with
    warning: ignoring operation "tryToLoginUser": more than one part in input message
    warning: ignoring operation "tryToLogOffUser": more than one part in input message
    warning: ignoring operation "createUserAccount": more than one part in input message
    warning: ignoring operation "removeUserAccount": more than one part in input message
    warning: Port "UserWebService" does not contain any usable operationsDoes this mean I can only use one parameter for input in an operation when I use style="document" use="literal" ??
    I understood it that way, so I created a new web service that takes username and password in one String.
    The new web service has four operations
        public boolean tryToLoginUser( String usernameAndPassword ) {}   
        public boolean tryToLogOffUser( String usernameAndPassword ){}
        public boolean createUserAccount( String usernameAndPassword ){ }
        public boolean removeUserAccount( String usernameAndPassword ){ }The problem is that I get this error when running HTTP GET.
      <?xml version="1.0" encoding="UTF-8" ?>
    - <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <soapenv:Body>
    - <soapenv:Fault>
      <faultcode>soapenv:Server.userException</faultcode>
      <faultstring>org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize.</faultstring>
    - <detail>
      <ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">slukare</ns1:hostname>
      </detail>
      </soapenv:Fault>
      </soapenv:Body>
      </soapenv:Envelope>If I get a WSDL2Java client it works (!) if I manually changes the parameter names. I have four operations which all takes
    String usernameAndPassword
    in one String since I can only use one parameter with style="document" use="literal"
    The WSDL2Java automatically set the parameter names to
    usernameAndPassword
    usernameAndPassword1
    usernameAndPassword2
    usernameAndPassword3
    for the different operations. If I manually changes them to all have the name
    usernameAndPassword
    it works. Why doesn�t it work without manual changes? I haven�t tested the code from Sun�s Wireless Toolkit 2.2 Stub Generator yet, but that at least doesn�t give any errors .
    My other web service doesn�t work either if I set style="document" use="literal".
    This web service returns my own classes I have written. It works as I said previously in J2SE with WSDL2Java, but not with style="document" use="literal�. When I set this my byte[] which is returned is null when using the client from WSDL2Java, this wasn�t the case without style="document" use="literal�.
    I also get an error in Sun�s Wireless Toolkit 2.2 that byte[] is not recoigniced. This wasn�t the case with axis WSDL2Java.
    If I put this inside the axis deployment descriptor
    <deployment xmlns="http://xml.apache.org/axis/wsdd/"
             xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
           <service xmlns:j2melab2="urn:businessobject.j2melab2"
                     name="RecipeWebService" provider="java:RPC" style="document" use="literal">
              <parameter name="scope" value="session"/>
              <parameter name="className" value="j2melab2.webservices.RecipeWebService"/>
              <parameter name="allowedMethods" value="*"/>
                    <typeMapping qname="j2melab2:ArrayOfString"
                                 type="java:java.lang.String[]"
                                 serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
                                 deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
                                 encodingStyle="http://schemas.xmlsoap.org/soap/encoding"/>
                    <beanMapping qname="j2melab2:Recipe" languageSpecificType="java:j2melab2.businessobject.Recipe"/>         
                    <beanMapping qname="j2melab2:Ingredient" languageSpecificType="java:j2melab2.businessobject.Ingredient"/>         
                    <typeMapping qname="j2melab2:ArrayofIngredient"
                                 type="java:j2melab2.businessobject.Ingredient[]"
                                 serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
                                 deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
                                 encodingStyle="http://schemas.xmlsoap.org/soap/encoding"/>
                    <typeMapping qname="j2melab2:ArrayOfByte"
                                 type="byte[]"
                                 serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
                                 deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
                                 encodingStyle="http://schemas.xmlsoap.org/soap/encoding"/>                            
         </service>
    </deployment>instead of this
    <deployment xmlns="http://xml.apache.org/axis/wsdd/"
             xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
           <service xmlns:j2melab2="urn:businessobject.j2melab2"
                     name="RecipeWebService" provider="java:RPC">
              <parameter name="scope" value="session"/>
              <parameter name="className" value="j2melab2.webservices.RecipeWebService"/>
              <parameter name="allowedMethods" value="*"/>
                    <typeMapping qname="j2melab2:ArrayOfString"
                                 type="java:java.lang.String[]"
                                 serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
                                 deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
                                 encodingStyle="http://schemas.xmlsoap.org/soap/encoding"/>
                    <beanMapping qname="j2melab2:Recipe" languageSpecificType="java:j2melab2.businessobject.Recipe"/>         
                    <beanMapping qname="j2melab2:Ingredient" languageSpecificType="java:j2melab2.businessobject.Ingredient"/>         
                    <typeMapping qname="j2melab2:ArrayofIngredient"
                                 type="java:j2melab2.businessobject.Ingredient[]"
                                 serializer="org.apache.axis.encoding.ser.ArraySerializerFactory"
                                 deserializer="org.apache.axis.encoding.ser.ArrayDeserializerFactory"
                                 encodingStyle="http://schemas.xmlsoap.org/soap/encoding"/>
         </service>
    </deployment>axis WSDL2Java won�t work anymore. And Sun�s Wireless Toolkit doesn�t work either with this. How can I get this to work with Sun�s Wireless Toolkit 2.2?
    So my questions are:
    Do I really need style=�document� use=�literal� for J2ME?
    Can I only have one parameter as input when I use style=�document� use=�literal� ?
    Why do I need to manally change the parameter names?
    How can I make Sun�s Wireless Toolkit 2.2 understand byte[] ?
    Many thanks for help :) (I have to present a solution in 1 � week to my J2ME teacher L).

    hi,
    i was wandering if you manage to successfully generate the stubs through the wireless toolkit at the end? i am currently having similar problem (i.e., trying to generate stub files based on wsdl from axis)? it seems that the WTK can only handle document/literal format, and so i change the wsdl to that. however, now it complains that it can't handle more than one input part in the message, (which is similar to the problem you had). so did you manage to find a solution to that, or J2ME simply does not support more than one arguement as the input?
    thanks in advance,
    lee

  • Please help : Integration Broker setup issue.

    Hello All,
    I'm working on integrating Peoplesoft HRMS 9.0 with Peoplesoft ELM 9.0 with Peopletools 8.49. Referring PeopleBooks, I'm able to successfully setup;
    1. Local and remote nodes (able to ping successfully)
    2. Message
    3. Nodes
    4. Service operations and Security
    5. Routings.
    Next, when I open respective messages in application designer, the message definition properties USE tab is blank.
    I'm not able to figure out the reason even after going through documents. I would appreciate if some one can help to figure out the reason.
    Thanks,
    TH

    That is correct. IB was rewritten in 8.48. The Use tab is a
    "hangover" to allow for converting from an earlier version to
    8.48 and (within reason) a back convert.

  • Please Help: BOBJ - WEBI Requirement

    Hi Users,
    I have a requirement from my client.
    Current situation is that we have data load happening from flat files to R/3 Tables and then we Universe as SEMANTIC layer on these tables on which we have build WEBI reports.
    Now Client wants to build Infocube and move all data from Z tables to Infocube and then directly connect cube to WEBI an build reports without universe as semantic layer anymore.
    So the question is:
    1. Will old reports be affected in any which ways? and what is the solution to avoid the impacts?
    2. Will there be any problem if navigational attributes being used?
    3. Can same hierarchies logic of objects and classes which were built at univers level be implemented at cube level?
    3. any functionalities of universe which cannot be implemented at cube level?
    Please suggest the impacts and what is best to do.
    Regards
    Syed
    Edited by: Zabi_Zabi on Mar 9, 2012 11:06 AM

    Are you on XI3.1 or BI4.0 ?
    thanks!

  • PLEASE help with multi-cam edit issue (head about to explode...)

    PLEASE believe me when I say I've watched 20 YouTube videos on the subject, read the manual, reinstalled FCS on a new machine (in the event that the install or my last MBP was at fault), etc., etc....
    JUST can't get FCP to make the cuts for me when I click on the angles in the viewer.
    Despite making a multi-clip, open synch, green/blue boarder for audio/video angle and blue boxes for video only, rendering, etc., the same thing always happens...
    When I hit the space-bar, making all the angles play @ same time in the browser, and then I click on an angle to make a real-time cut, the in-point of the selected angle pops onto the canvas (a still frame) and everything STOPS.
    Happy to describe any other details; can begin to tell you how stoked I'll be if I can get past this...
    (I've been reduced to trying to use iMovie to cut this 3 angle live-music performance video, which is taking HOURS for a single song...with terrible results...)
    :-/

    Starting over:
    1) Import 3 .dv clips (all same frame size, vid rate, compression, etc.)
    2) Create new bin for footage, assign angle numbers to clips
    2) Add in-point for synchronization
    3) Make multiclip (and synch in-points)
    4) Double-click on multiclip (and it then shows in viewer)
    5) Press "overwrite" to bring multiclip into timeline
    6) Open playhead sync
    7) Assign blue and green 'boxes' in viewer (audio/video, and video only)
    8) Click into timeline, make sure playhead is to the front of the sequence
    9) hit space bar to start editing.
    10) NOW, whenever I click on an angle in the viewer to make an edit, playback stops and a still frame for the selected angle shows in the canvas.
    ANY THOUGHTS??

Maybe you are looking for