Please help.. ios 8 in ipad 2 not working well...

Problem Ios 8 in Ipad 2, such as
-hang,
-crash,
-hang during update apps,
-bbm error,
-five fingres closing app often failed,
-slower process..
but before ios 8, ipad 2 very health well.
Apple, please fix it for ipad 2....

Your iPad 2 crash and perform slow mostly because it is old, not suitable for running in iOS 8 though Apple has listed it in the compatible list. You have 2 options to improve its performance:
1st, speed up iOS 8 on your iPad. To make it, you should try software, like SafeEraser to clear junk files and deleted files. Then delete unwanted apps, text messages, photos, and more, leaving more storage on the iPad for other items. Most of all, end multiple task while starting a new task. And you should also need to reduce motion effect and transparency.
2nd, if the first way can't solve the crash and slow problem, you should consider a downgrade. Now you can downgrade iPad 2 from iOS 8 to iOS 7.1.2. but you have to do it in a hurry, because later Apple may close the verifying process for iOS 7. Here are steps:
1). Download iOS 7.1.2 firmware according to your iPad model. there are multiple websites offering the download. Google it by yourself
2). Make sure you have install the latest version of iTunes.
3). Connect your iPad to computer via a USB cable.
4). After detected, your iPad will be shown in the left column. Click it to show the control panel.
Note: Make sure you have backups of your iPhone 4S. if not, backup it now.
5). Under Summary tab,hold on Shift key for Windows (Option key for Mac )and click Restore iPad...
6). In the pop-up window, find the firmware on your computer and click Open. Then， iTunes will downgrade your iPad to iOS 7.1.2.

Similar Messages

  • Please help me my apple id its not working what do i do?

    please help me my apple id is not working what do i do

    If you desire speedy resolution it helps to be more specific with error messages etc. when asking a question here.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages and I need to!  Please help!!  "Add page" is not working!!!

    I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages past that and I need to!  Please help!!  "Add page" is not working!!!

    Fixed it thanks to similar questions and answers to them.  Thanks all!

  • I have a Ipad4  and now it shows a big screem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?

    I have an Ipad4  and now it shows a big sceem  and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do?          Is it a hardware problem?
    Look the 2 images on link below:
    https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1Ljbmd

    Try Settings > General > Accessibility > Zoom: OFF
    Note: You may need to use 3 fingers to tap and scroll.

  • Please Help! Drag and drop does not work in Adobe AIR 3.1 (FlashBuilder 4.6)

    I am working on a PC is made of air and flashbuilder 4.6.
    Drag and drop application does not work in Flash Builder 4.6.
    However, the same source will work with Flash Builder 4.5.
    Please help me.
    <?xml version="1.0" encoding="utf-8"?>
    <s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                                  xmlns:s="library://ns.adobe.com/flex/spark"
                                  xmlns:mx="library://ns.adobe.com/flex/mx"
                                  backgroundColor="#323232" width="100%" height="100%"
                                  initialize="init(event)"
                                  nativeDragEnter="onDragEnter(event)"
                                  nativeDragDrop="onDragDrop(event)">
              <fx:Script>
              <![CDATA[
                        import mx.events.FlexEvent;
                        protected function init(event:FlexEvent):void
                                  addEventListener(NativeDragEvent.NATIVE_DRAG_ENTER, onDragEnter);
                                  addEventListener(NativeDragEvent.NATIVE_DRAG_DROP, onDragDrop);
                        private function onDragEnter(event:NativeDragEvent):void
                                  if (event.clipboard.hasFormat(ClipboardFormats.FILE_LIST_FORMAT))
                                            NativeDragManager.acceptDragDrop(this);
                        private function onDragDrop(event:NativeDragEvent):void
                                  var arr:Array;
                                  arr = Array(event.clipboard.getData(ClipboardFormats.FILE_LIST_FORMAT));
                                  startImage.source = (arr[0] as File).url;
                ]]>
              </fx:Script>
              <s:layout>
                        <s:VerticalLayout/>
              </s:layout>
              <s:BorderContainer id="bc" borderStyle="solid" width="200" height="80%"/>
              <s:Image id="startImage" width="100%" height="100%"
                                             horizontalAlign="center" verticalAlign="middle"/>
      </s:WindowedApplication>

    Thank you answers, but it was not the answer I wanted.
    [Problem]
    * Flash Builder 4.5.1(updater) or Flash Builder 4.6
    - If you have installed on pc, does not work adobe air drag and drop
    [Solution]
    1. Reinstalling the Windows 7 (32bit).
    2. Install Flash Builder 4.5.
    3. Flash Builder 4.5.1 updater and Flash Builder 4.6 does not install.
       (Instead of using Flex SDK 4.6 is set up)
    In addition, Windows7 64bit environment does not work drag and drop.
    Is there another solution?

  • URGENT PLEASE HELP - Source determination in Limits Carts not working

    Dear all,
    We have implemented SRM 4 on Server 5.0 and ECC 5 backend.
    We have in our environment service masters that have been catalogued and linked to Contracts. When one raises a cart and selects one on these catalogue service items, a backend PO correctly creates and references the contract as specified in the catalog.
    The problem we have discovered that if we raise a Limits order and specify the material group stipulated in the contract for a service, source determination fails to "pick up" this contract line. We are forced to enter a supplier all the time!
    Also if we raise a text service line and select from "internal Goods/Services" a Service Master record and add it tothe cart, surce determination also does not pick up the R3 contract/line that matched this service. This means that when POs are created in the backend, they are not referencing any contract (no call-off)
    Why is this happening? How come catalogue items linked to a service masters and contracts work and correctly and a Limits order do not?
    Please help, we need to resolve this issue today.
    Thanks,
    Grace.

    Hi Grace,
    The contracts that are created in SRM can only be refered as Source of supplies while creating shopping carts if your are working in Extended Classic scenario.
    In case you want to refer the back end contracts, Info. records for creating shopping carts you have to implement classic scenario.
    The standard SRM does not provide the functionality you needed where as if you want to use back end contracts for a particular product category you can implement "Controlled Extended Classic Scenario BADI " which makes the classic scenario active for that product category, there by a back end contract can be referred for that product category when ever a shopping cart is made.
    Hope this makes you clear. Clarifications are welcome.
    Award points for suitable replies.
    Rgds,
    Teja

  • Please help me. Some websites do not work.

    Hi Forum,
    I have a strange problem. I am not able to log on to certain websites over WIFI like www.singaporeair.com and www.expedia.co.in on my MacBook Air 13 inch 256 GB (Late 2010).
    I tried these websites on my iPad and they seem to work well but only over 3G and NOT Wifi. I have two wifi routers installed at home. One is an Airport with WPA security and the other from my Cable Operator with a WEP Security. I tried using both individually but to no avail.
    Has anyone experienced a similar problem. Would really appreciate if you could help.

    Is the modem you received from your ISP a modem/router combo or did you get a modem and then a separate router from them?
    Try plugging the Mac directly into the modem with an ethernet and check to see if you can access the websites. If you cannot then you should probably contact your ISP as they appear to be blocking it.
    If you can then try using an ethernet again between the Mac & each of the routers.

  • Please help Excite 10 AT305-T16 screen not working

    Hello my Excite 10 AT305-T16 WAS stuck on the lock screen. I reset it to factory settings by holding the "+" and power button. I was sure that this would have resolved the issue with my tablet but it didn't. I am still unable to use the screen of my tablet. The only thing I can do is power it off, by holding the power button. I'm not sure what to do with it now. other than continue to power it on and off even though there hasn't been a change in what's happened. Please help, I would like to be able to use it again.
    P.S. I have never spilled anything on it, or dropped it.

    It sounds like you'll need to contact customer support and set up a repair.
    You can call (800) 457-7777.
    - Peter

  • Please Help! email name and password not working/ cannot retrieve email

    email stopped working. does not accept username and password. keychain repair works. password verified. still doesnt work. when I tried to pay for a new account it would not let me use my original name and password, saying they were already in use!
    help please, i want my email to work..

    The second list of 1 through 6 was for when you don't have a disc.
    Also...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... though I was just thinking, this new User probably shouldn't be the same name as an existing one.
    If that doesn't work for you (and some users have reported it has not worked for them), try Niel's procedure Making the Setup Assistant reappear.
    http://discussions.apple.com/thread.jspa?messageID=607547
    I lost my admin user (Mac OS X 10.4 and earlier) ...
    http://discussions.apple.com/thread.jspa?threadID=121786&tstart=0
    I'd call AppleCare you can get Replacement Install Disks shipped to you at a reduced rate, have your Mac's Serial # handy...
    http://www.apple.com/support/contact/phone_contacts.html

  • Just replaced iphone battery!! Please help!! Ear speaker does not work.

    I just replaced my iphone 3g battery. It seemed to go smooth. Everything works normally except the ear speaker doesnt work. When i try to make an outgoing call i cant here it ring, but my phone will actually call another phone. Does anyone know what # that connector is labeled as on the motherboard or back of the screen? Any help would be much appreciated!!!!!

    There may be a problem with the microswitch in the headset jack. Click on the following link for the Palm KB article regarding this issue.
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=40427
    If this procedure does not work then the phone will need to be replaced.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • NEW iPad 3G Not Working well in Singapore

    I tested the 3G on my new iPad against iPhone 4 - The 3G is just NOT working on iPad.
    I tested in more than 10 locations - home, work place and others. In many areas, the 3G is working well on iPhone 4, whereas it is non-existance or slow like a snail on the new iPad.
    Please fix this Apple! Thank you.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Guided access in iOS 8 on iPad air not working

    I got an iPad air and after updating to iOS 8, guided access, which I use several time a day to my 1-year old son.
    I haven't tried to reinstall the device, but I have tried to restore to factory settings and I have tried to turn off guided access, then reboot the iPad and here comes a strange thing. Before I restarted the device, I turned off guided access as earlier mentioned but when I rebooted the device, guided access was turned on..
    Well I tried to see if it had helped, I opened Safari and triple clicked the home button and happily guided access started. I then stopped voided access and tried starting it in the Synology DS Video app where I normally use guided access. I triple clicked and nothing happens.
    I tried going back to Safari, triple clicked, nothing happens.
    Again I tried to turn off guided access, reboot turn it on again but it was already turned off.
    As for now, my son can't use the iPad until a solution the this appears.
    Anyone got some kind of solution?
    Have a nice day!
    - Mark

    Guided Access had worked fine for me in iOS 7 on my iPad 3 and on my iPhone 4s. However, since upgrading both devices to iOS 8 Guided Access has ceased to function for me. I have tried hard rebooting both devices (turning off Guided Access first), and it seemed to work briefly on one of the two devices -- the iPad I believe, but then the function failed once again. And now I can't get it to work at all on either device. I do hope Apple fixes this relatively soon as it is critical for the fun that my toddler grandson and I share together on these devices!

  • Please help!!! Maps is not working anymore in my N...

    Hello guys, I happen to use the maps before in find place under address. I can see the roads and blocks on the map moving when you try to use the cursor keys. But when I visited nokia site, I found there is the latest map loader to download latest maps. I'm too excited about it thinking that there will be more specific roads, streets and blocks to find, in short an enhanced map. I downloaded Saudi Arabia thru USB mass storage and was successful. Then, I try to run the maps and go to find place under address same thing as I did before, but now it says no results found. Aside from that, I can't see the roads and blocks anymore. How come? Then, I thought of maybe because I didn't update my software device since my version is only v10.0.18 but another problem is, I can't update it thru firmware w/c was supposed to be v21.0.16 if it will be successful. I want my maps back, the old configuration before. I even deleted what's inside the cities folder in drive E for memory card but still the same. Pls. help me. I hope I could find answers from you guys. Thanks.

    Ok.
    It sounds as if something is keeping the key pressed, and that can be down to 2 reasons.
    The phone has got wet and the internal key is corroded and fused, making a constant connection
    or
    Dust or dirt in under that key and are having the same affect
    Either one of these reasons will need to be fixed at a Nokia Care Point as it will involve taking the phone apart.
    You can find the nearest NCP to you at the Store Locator
    Use the drop down list on the right to find your country.
    If it is either of these faults, the NCP will probably charge you as it wont be a warranty fault, but a customer created fault.
    Hope this helps.
    My posts are my opinion and in no way the direct views of Nokia.
    If my posts are helpful, please give me some KUDOS using the green star on the left.

  • Please Help.  Lightbox Gallery Widget will not work

    When I put it into Dreamweaver and then go preview it in browser there are just a bunch of empty boxes where the images should be.  The images actually show up in dreamweaver but not as a functioning widget, but the images will not show up when I preview them in browsers... any help will be appreciated.
    Avery

    So I think I figured it out... I guess it didnt transfer all the files needed when I brought it from the widget browser... so i downloaded it from adove exchange I think... and then I went to insert and went to the bottom to tcn widgets and then it worked....

  • Please Help - Network System Preferences/Advanced Airport Not Working

    Hi all.....I posted here before and got no replies but I'll try again.....nothing happens when I click the advanced button in Network System preferences but only in Airport - which is my primary connection....I have reinstalled the 10.5.6 update and have been trying to resolve for weeks......any help is most, most appreciated!
    Thanks

    Thanks...I did and twice the cpu just froze........no kidding......I was able to set up a new location after reinstalling 10.5.6 but still the advanced button in sys prefs/network, only in airport, does not do a thing.
    Here's the console message after clicking the advanced button:
    4/26/09 11:49:55 AM System Preferences[17974] Error: Could not load AirPortOptionsTabView.nib
    4/26/09 11:49:55 AM System Preferences[17974] * Assertion failure in -[NSTextFieldCell _objectValue:forString:errorDescription:], /SourceCache/AppKit/AppKit-949.43/AppKit.subproj/NSCell.m:1338
    4/26/09 11:49:55 AM System Preferences[17974] Invalid parameter not satisfying: aString != nil
    Thanks for any help.....I'm dying to change my DNS Settings using airport and can't.........plus this just doesn't seem "right."

Maybe you are looking for